GNUmakefile.in

#
# EMULAB-COPYRIGHT
# Copyright (c) 2000-2007 University of Utah and the Flux Group.
# All rights reserved.
#
# Testbed Makefile
#
SRCDIR		= @srcdir@
OBJDIR		= .
SUBDIR		= 
TESTBED_SRCDIR  = @top_srcdir@
DISTCLEAN_FILES = @DISTCLEAN_FILES@ 
EVENTSYS	= @EVENTSYS@
PELABSUPPORT	= @PELABSUPPORT@

SYSTEM	       := $(shell uname -s)

include Makeconf

#
# Ordering here matters!
# Things with no dependencies go first: 
#   assign db lib www
# Things that may have dependencies go next:
#   @optional_subdirs@ (has event)
#   ipod os security sensors 
# Then things that only depend on stuff we've done:
#   pxe tbsetup tmcd utils www tip capture vis
# Then things that depend on stuff we just did:
#
SUBDIRS = lib db assign www @optional_subdirs@ ipod security sensors \
		pxe tbsetup account tmcd utils tip capture ipod vis \
		sensors os xmlrpc install/newnode_sshkeys mote tools/whol \
		tools/svn wiki bugdb collab tools/rmanage

all:		all-subdirs 

install:	
	@echo "Choose either boss-install, ops-install or fs-install"
	@echo "Choose opsfs-install instead of ops-install for a combined ops/fs machine"
	@echo "Choose tipserv-install for dedicated tip server machines."

#
# For installation on boss node
# 
boss-install:	install-schemacheck install-sitevarscheck install-dbfillcheck \
		install-subdirs install-mkdirs install-setbuildinfo
	@echo "Boss node installed!"

#
# Same target, with the install-schemacheck dependency omitted
# 
boss-install-force:	install-subdirs install-mkdirs install-setbuildinfo
	@echo "Boss node installed!"

post-install:
	@$(MAKE) -C db post-install
	@$(MAKE) -C ipod post-install
	@$(MAKE) -C tbsetup post-install
	@$(MAKE) -C account post-install
	@$(MAKE) -C security post-install
	@$(MAKE) -C vis post-install
	@$(MAKE) -C www post-install
ifeq ($(EVENTSYS),1)
	@$(MAKE) -C event post-install
endif
	@$(MAKE) -C mote post-install
	@$(MAKE) -C tools post-install
	@$(MAKE) -C wiki post-install
	@$(MAKE) -C bugdb post-install
	@$(MAKE) -C collab post-install
	@$(MAKE) -C utils post-install

#
# For installation on the 'ops' or 'users' node (okay, plastic)
# 
ops-install:
	-mkdir -p $(INSTALL_TOPDIR)/log
	-mkdir -p $(INSTALL_TOPDIR)/log/mysql
	-chmod 770 $(INSTALL_TOPDIR)/log/mysql
	-chown mysql $(INSTALL_TOPDIR)/log/mysql
	-chgrp mysql $(INSTALL_TOPDIR)/log/mysql
	@$(MAKE) -C tbsetup control-install
	@$(MAKE) -C security control-install
	@$(MAKE) -C tip control-install
#	@$(MAKE) -C os control-install
	@$(MAKE) -C db control-install
	@$(MAKE) -C tbsetup control-install
	@$(MAKE) -C utils control-install
	@$(MAKE) -C lib control-install
ifeq ($(EVENTSYS),1)
	@$(MAKE) -C event control-install
endif
	@$(MAKE) -C sensors control-install
	@$(MAKE) -C xmlrpc control-install
	@$(MAKE) -C tmcd control-install
	@$(MAKE) -C account control-install
ifeq ($(PELABSUPPORT),1)
	@$(MAKE) -C pelab control-install
endif

fs-install:
	@$(MAKE) -C tbsetup fs-install
	@$(MAKE) -C sensors fs-install

opsfs-install: ops-install fs-install
	@echo "Combined ops/fs install done."

install-mkdirs:
	-mkdir -p $(INSTALL_TOPDIR)/opsdir
	-mkdir -p $(INSTALL_TOPDIR)/locks
	-mkdir -p $(INSTALL_TOPDIR)/log
	-mkdir -p $(INSTALL_TOPDIR)/log/mysql
	-mkdir -p $(INSTALL_TOPDIR)/log/exports
	-mkdir -p $(INSTALL_TOPDIR)/lists
	-mkdir -p $(INSTALL_TOPDIR)/backup
	-mkdir -p $(INSTALL_TOPDIR)/etc
	-mkdir -p $(INSTALL_TOPDIR)/expwork
	-mkdir -p $(INSTALL_TOPDIR)/batch
	-chmod 777 $(INSTALL_TOPDIR)/batch
	-mkdir -p $(INSTALL_TOPDIR)/expinfo
	-chmod 777 $(INSTALL_TOPDIR)/expinfo
	-mkdir -p $(INSTALL_TOPDIR)/exparchive
	-chmod 777 $(INSTALL_TOPDIR)/exparchive
	-mkdir -p $(INSTALL_TOPDIR)/exparchive/Archive
	-chmod 777 $(INSTALL_TOPDIR)/exparchive/Archive
	-mkdir -p $(INSTALL_TOPDIR)/images
	-chmod 775 $(INSTALL_TOPDIR)/images
	-ln -s /usr/testbed/bin/nse $(INSTALL_TOPDIR)/bin
	-mkdir -p $(INSTALL_TOPDIR)/ssl
	-chmod 770 $(INSTALL_TOPDIR)/ssl

tipserv-install:
	-mkdir -p $(INSTALL_TOPDIR)/log/tiplogs
	-mkdir -p $(INSTALL_TOPDIR)/etc
	@$(MAKE) -C tip tipserv-install
	@$(MAKE) -C capture tipserv-install
	@$(MAKE) -C tbsetup tipserv-install

client-mkdirs:
	-mkdir -p $(DESTDIR)$(CLIENT_BINDIR)
	-mkdir -p $(DESTDIR)$(CLIENT_MANDIR)

client:
	@$(MAKE) -C lib/libtb client
ifeq ($(EVENTSYS),1)
	@$(MAKE) -C event client
endif
	@$(MAKE) -C os client
ifneq ($(SYSTEM),CYGWIN_NT-5.1)
	@$(MAKE) -C capture client
	@$(MAKE) -C tip client
	@$(MAKE) -C tools client
endif
	@$(MAKE) -C sensors client
	@$(MAKE) -C tmcd client

client-install: client client-mkdirs
ifeq ($(EVENTSYS),1)
	@$(MAKE) -C event client-install
endif
	@$(MAKE) -C os client-install
ifneq ($(SYSTEM),CYGWIN_NT-5.1)
	@$(MAKE) -C capture client-install
	@$(MAKE) -C tip client-install
	@$(MAKE) -C tools client-install
endif
	@$(MAKE) -C sensors client-install
	@$(MAKE) -C tmcd client-install

TARBALLDESTDIR = /var/tmp/emulab-client

client-tarball:
	@if [ `id -u` -ne 0 ]; then \
	    echo '*** Must run as root!'; \
	    false; \
	fi
	@if [ -d "$(TARBALLDESTDIR)" ]; then \
	    echo "$(TARBALLDESTDIR) already exists."; \
	    echo "Remove it and try again."; \
	    false; \
	fi
	echo "Building and installing client-side in $(TARBALLDESTDIR)..."
	DESTDIR=$(TARBALLDESTDIR) $(MAKE) client-install
	echo "Creating tarball..."
	tar czf emulab-client.tar.gz -C $(TARBALLDESTDIR) .

destdircheck:
	@if [ -z "$(DESTDIR)" ]; then \
	    echo "You must define DESTDIR for this target!"; \
	    false; \
	fi
	@if [ "$(DESTDIR)" = "/" ]; then \
	    echo "DESTDIR is '/', really really bad idea!"; \
	    false; \
	fi

mfsoscheck:
	@if [ `uname -s` != "FreeBSD" ]; then \
	    echo "Must build CDROM/MFS files on a FreeBSD system!"; \
	    false; \
	fi

mfs: mfsoscheck
	@$(MAKE) -C os mfs
	@$(MAKE) -C sensors mfs
	@$(MAKE) -C tmcd mfs

mfs-nostatic: mfsoscheck
	@NOSTATIC=1 $(MAKE) -C os mfs
	@NOSTATIC=1 $(MAKE) -C sensors mfs
	@NOSTATIC=1 $(MAKE) -C tmcd mfs

mfs-install: destdircheck mfs client-mkdirs
	@$(MAKE) -C os mfs-install
	@$(MAKE) -C sensors mfs-install
	@$(MAKE) -C tmcd mfs-install

mfs-nostatic-install: destdircheck mfs-nostatic client-mkdirs
	@$(MAKE) -C os mfs-install
	@$(MAKE) -C sensors mfs-install
	@$(MAKE) -C tmcd mfs-install

frisbee-mfs: mfsoscheck
	@$(MAKE) -C cdrom/groklilo client
	@$(MAKE) -C os frisbee-mfs
	@$(MAKE) -C tmcd frisbee-mfs

frisbee-mfs-nostatic: mfsoscheck
	@NOSTATIC=1 $(MAKE) -C cdrom/groklilo client
	@NOSTATIC=1 $(MAKE) -C os frisbee-mfs
	@NOSTATIC=1 $(MAKE) -C tmcd frisbee-mfs

frisbee-mfs-install: destdircheck frisbee-mfs
	@CLIENT_BINDIR=/etc/testbed $(MAKE) -e -C cdrom/groklilo client-install
	@$(MAKE) -C os frisbee-mfs-install
	@$(MAKE) -C tmcd frisbee-mfs-install

frisbee-mfs-nostatic-install: destdircheck frisbee-mfs-nostatic
	@CLIENT_BINDIR=/etc/testbed $(MAKE) -e -C cdrom/groklilo client-install
	@$(MAKE) -C os frisbee-mfs-install
	@$(MAKE) -C tmcd frisbee-mfs-install

cdboot: mfsoscheck client
	@echo "CD/Dongle files built"

cdboot-install: destdircheck cdboot
	@$(MAKE) -C cdrom client-install
	@$(MAKE) -C tmcd/freebsd6 cdboot-install

#
# A check to see if this is a 'real' install. Kinda hacky, but as far as I can
# tell, you can't put ifeq()'s inside of targets
#
ifeq ($(TBROOT),/usr/testbed)
SCHEMACHECK= cd $(OBJDIR)/db && perl schemacheck
else
SCHEMACHECK= @echo "Skipping schema check, since prefix isn't /usr/testbed"
endif
install-schemacheck:
	@echo "Checking DB schema..."
	$(SCHEMACHECK)

ifeq ($(TBROOT),/usr/testbed)
SITEVARSCHECK= cd $(OBJDIR)/db && perl sitevarscheck
else
SITEVARSCHECK= @echo "Skipping sitevars check, since prefix isn't /usr/testbed"
endif
install-sitevarscheck:
	@echo "Checking Site variables..."
	$(SITEVARSCHECK)

ifeq ($(TBROOT),/usr/testbed)
DBFILLCHECK= cd $(OBJDIR)/db && perl dbfillcheck
else
DBFILLCHECK= @echo "Skipping DB fill check, since prefix isn't /usr/testbed"
endif
install-dbfillcheck:
	@echo "Checking Initial DB Fill ..."
	$(DBFILLCHECK)

ifeq ($(TBROOT),/usr/testbed)
SETBUILDINFO= cd $(OBJDIR)/utils && perl setbuildinfo
else
SETBUILDINFO= @echo "Skipping setbuildinfo, since prefix isn't /usr/testbed"
endif
install-setbuildinfo:
	@echo "Setting the Build and Version info"
	$(SETBUILDINFO)

# We use separate src and obj trees in Emulab, so the traditional distclean to
# clean "made" files from a mingled source-and-obj tree is unnecessary.
# However, this may be useful if you mistakenly configure and make a src tree.
clean:		clean-subdirs
distclean:	distclean-subdirs
	rm -f Makeconf GNUmakefile config.h config.status config.cache config.log
	rm -f $(DISTCLEAN_FILES)
#
# Here's a different approch to recover from just configure problems.  It cleans
# all files from an obj tree that have a corresponding .in file in the src tree.
undo-configure:
	find $SRCDIR -name '*.in' -a -not -name configure.in | \
	    sed -e "s;$SRCDIR;$OBJDIR;" -e 's;[.]in$;;' | xargs rm -f

elabinelab:
	-mkdir -p $(INSTALL_TOPDIR)/src
	rm -f $(INSTALL_TOPDIR)/src/emulab-src.tar.gz
	tar czf $(INSTALL_TOPDIR)/src/emulab-src.tar.gz -C $(SRCDIR) .

# How to recursively descend into subdirectories to make general
# targets such as `all'.
%.MAKE:
	@$(MAKE) -C $(dir $@) $(basename $(notdir $@))
%-subdirs: $(addsuffix /%.MAKE,$(SUBDIRS)) ;

# By default, make any target by descending into subdirectories.
%: %-subdirs ;

.PHONY: post-install install-mkdirs

# Get rid of a bunch of nasty built-in implicit rules.
.SUFFIXES: