1. 24 Sep, 2012 1 commit
    • Eric Eide's avatar
      Replace license symbols with {{{ }}}-enclosed license blocks. · 6df609a9
      Eric Eide authored
      This commit is intended to makes the license status of Emulab and
      ProtoGENI source files more clear.  It replaces license symbols like
      "EMULAB-COPYRIGHT" and "GENIPUBLIC-COPYRIGHT" with {{{ }}}-delimited
      blocks that contain actual license statements.
      
      This change was driven by the fact that today, most people acquire and
      track Emulab and ProtoGENI sources via git.
      
      Before the Emulab source code was kept in git, the Flux Research Group
      at the University of Utah would roll distributions by making tar
      files.  As part of that process, the Flux Group would replace the
      license symbols in the source files with actual license statements.
      
      When the Flux Group moved to git, people outside of the group started
      to see the source files with the "unexpanded" symbols.  This meant
      that people acquired source files without actual license statements in
      them.  All the relevant files had Utah *copyright* statements in them,
      but without the expanded *license* statements, the licensing status of
      the source files was unclear.
      
      This commit is intended to clear up that confusion.
      
      Most Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the Affero GNU General Public License, version 3
      (AGPLv3).
      
      Most Utah-copyrighted files related to ProtoGENI are distributed under
      the terms of the GENI Public License, which is a BSD-like open-source
      license.
      
      Some Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the GNU Lesser General Public License, version 2.1
      (LGPL).
      6df609a9
  2. 15 Feb, 2006 1 commit
    • David Johnson's avatar
      * Makeconf.in, configure, configure.in, defs-default, defs-johnsond-emulab: · 4982b9cd
      David Johnson authored
          - added a new defs var, TBROBOCOPSEMAIL
      
        * tbsetup/power_mail.pm.in:
          - add some new info to robot powerup mails
      
        * db/libdb.pm.in:
          - add a new function to determine if an experiment contains nodes of a
            given class/type
      
        * tbsetup/swapexp.in:
          - check if exp is a robot exp; that is, if it has robots or motes; if
            so, cc error msgs to TBROBOCOPSEMAIL in addition to TBOPS
      4982b9cd
  3. 12 Jan, 2006 2 commits
  4. 16 May, 2005 1 commit
    • Timothy Stack's avatar
      · da5e8604
      Timothy Stack authored
      Some power-by-mail hacking:
      
        - Bump the timeout for waiting for the operators to flip the switch
          to 20 minutes.
      
        - Fail fast if the node is in hwdown.  This case is intended to make
          an os_load fail for a robot-mounted mote whose robot is in hwdown.
      
        - Fail if the robotlab is not open since noone is around to do
          anything about it anyways.
      
        - Assume success if the event state for a node was updated
          "recently."  This is a fall back in case the powertime web page
          isn't used to notify the system that the node was powered
          on/cycled.  Also, do not send the SHUTDOWN event in this case.
      
        - Add a TBNodeEventStateUpdated() function to libdb.pm that returns
          true if the eventstate for a node was updated within N seconds
          from the current time.
      da5e8604
  5. 24 Feb, 2005 1 commit
  6. 09 Feb, 2005 1 commit
    • Timothy Stack's avatar
      · ea206d40
      Timothy Stack authored
      Robot-related improvements based on feedback from Sid:
      
      	* event/sched/event-sched.h, event/sched/event-sched.c,
      	event/sched/rpc.h, event/sched/rpc.cc: Send a notification of the
      	start of event time and timelines.  Add a '-r' option that forces
      	it to use the default rpc path (so dan can use a custom
      	scheduler/rmcd/etc on ops).
      
      	* robots/GNUmakefile.in, robots/emc/GNUmakefile.in,
      	robots/mtp/GNUmakefile.in, robots/primotion/GNUmakefile.in,
      	robots/rmcd/GNUmakefile.in, robots/vmcd/GNUmakefile.in,
      	robots/tbsetdest/tbsetdest.cc: Add a control-install target.
      
      	* robots/primotion/garcia-pilot.cc: Take out some experimental
      	code.
      
      	* robots/primotion/dashboard.hh, robots/primotion/dashboard.cc,
      	robots/primotion/pilotClient.cc, robots/primotion/wheelManager.hh,
      	robots/primotion/wheelManager.cc: When doing a COMMAND_STOP, make
      	sure we only send one update packet, an idle or an abort.  Also
      	send back the actual distance travelled/pivoted.
      
      	* robots/tbsetdest/tbsetdest.cc: Don't output setdest event's with
      	a speed of zero.
      
      	* tbsetup/eventsys_control.in: When replaying/stopping, clear the
      	start of event time for the experiment.
      
      	* tbsetup/power_mail.pm.in: Decrease the threshold used to tell if
      	a node has been power cycled "recently".
      
      	* tbsetup/ns2ir/node.tcl, tbsetup/ns2ir/sim.tcl.in: Bah, backout
      	last change, orientation is supposed to be in degrees at these
      	points.  Also, when automatically picking the sync server, don't
      	use nodes that are subnodes.
      
      	* tmcd/common/bootsubnodes: Send an ISUP for motes.
      
      	* www/moteleds.php3: Show the mote node names instead of the
      	robots.
      
      	* www/powertime.php3: Add option to mark nodes as powered off.
      
      	* www/robotmap.php3: Display the elapsed time for the overall
      	event time and for each active timeline.
      
      	* www/showexp.php3: Only display the blinky lights menu item when
      	there are motes.
      
      	* www/shownode.php3: Change "Update Power Time" -> "Update Power
      	State".
      
      	* www/tutorial/mobilewireless.php3: Fix some nits.
      
      	* xmlrpc/emulabserver.py.in: Add event_time_start method for
      	storing/getting/clearing the start of event time for an
      	experiment/timeline.
      ea206d40
  7. 24 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · 3c1a5bad
      Timothy Stack authored
      Robot related stuff: power via e-mail, client-install fixups, checking
      coords against camera boundaries.
      
      	* configure, configure.in: Add tbsetup/power_mail.pm to the list
      	of template files.
      
      	* doc/cross-compiling.txt: More stargate notes.
      
      	* event/sched/rpc.cc: Updates for the addition of the cameras
      	table.
      
      	* robots/GNUmakefile.in, robots/emc/GNUmakefile.in,
      	robots/mtp/GNUmakefile.in, robots/rmcd/GNUmakefile.in,
      	robots/tbsetdest/GNUmakefile.in, robots/vmcd/GNUmakefile.in:
      	client-install fixups.
      
      	* tbsetup/GNUmakefile.in: Add power_mail.pm.
      
      	* tbsetup/os_setup.in: Don't skip reboot of robots anymore.
      
      	* tbsetup/power.in: Add special case for a power_id of "mail",
      	which calls into the power_mail.pm backend.
      
      	* tbsetup/power_mail.pm.in: E-mail backend for power, it sends an
      	e-mail to tbops and waits for the outlets.last_power value to be
      	updated from the power.php3 web page.
      
      	* tbsetup/ns2ir/parse-ns.in: Add the contents of the cameras table
      	to the TBCOMPAT namespace.
      
      	* tbsetup/ns2ir/sim.tcl.in: More checking of "setdest" inputs.
      
      	* tbsetup/ns2ir/topography.tcl: Update the checkdest method to
      	check destination points against the camera list.
      
      	* www/powertime.php3: Webpage used to update the last power time
      	for nodes.
      
      	* www/shownode.php3: Add "Update Power Time" menu button.
      3c1a5bad