1. 16 May, 2014 1 commit
  2. 24 Sep, 2012 1 commit
    • Eric Eide's avatar
      Replace license symbols with {{{ }}}-enclosed license blocks. · 6df609a9
      Eric Eide authored
      This commit is intended to makes the license status of Emulab and
      ProtoGENI source files more clear.  It replaces license symbols like
      "EMULAB-COPYRIGHT" and "GENIPUBLIC-COPYRIGHT" with {{{ }}}-delimited
      blocks that contain actual license statements.
      
      This change was driven by the fact that today, most people acquire and
      track Emulab and ProtoGENI sources via git.
      
      Before the Emulab source code was kept in git, the Flux Research Group
      at the University of Utah would roll distributions by making tar
      files.  As part of that process, the Flux Group would replace the
      license symbols in the source files with actual license statements.
      
      When the Flux Group moved to git, people outside of the group started
      to see the source files with the "unexpanded" symbols.  This meant
      that people acquired source files without actual license statements in
      them.  All the relevant files had Utah *copyright* statements in them,
      but without the expanded *license* statements, the licensing status of
      the source files was unclear.
      
      This commit is intended to clear up that confusion.
      
      Most Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the Affero GNU General Public License, version 3
      (AGPLv3).
      
      Most Utah-copyrighted files related to ProtoGENI are distributed under
      the terms of the GENI Public License, which is a BSD-like open-source
      license.
      
      Some Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the GNU Lesser General Public License, version 2.1
      (LGPL).
      6df609a9
  3. 13 Apr, 2012 1 commit
    • Mike Hibler's avatar
      Remove dependency on a racy state transition. · 089676f5
      Mike Hibler authored
      The recent reboot-node-if-going-from-PXEWAIT-to-SECURELOAD change to
      bootinfo was checking that the node was in PXEKERNEL/PXEBOOTING. However,
      the transition from PXEWAKEUP->PXEBOOTING may not have happened yet.
      
      However, the check for PXEBOOTING was unnecessary anyway, since bootinfo
      is the one that sends that state and it *always* does it just before calling
      query_bootinfo_db (the guy relying on the racy state change). Thus, the node
      is intended to be in PXEBOOTING even if that hasn't yet been recorded in
      the DB. So just remove the state check (we still check the op_mode).
      
      Note that this only affects nodes that are using the secure diskload MFS.
      089676f5
  4. 14 Apr, 2010 1 commit
    • Mike Hibler's avatar
      Changes for speeding up elabinelab server setup. · 6feda7d3
      Mike Hibler authored
      Boss/ops/fs: reboot them together after setup rather than serially.
      
      Nodes: leave them in PXEWAIT throughout the setup, until after boss has
      been rebooted.  At that point we send them the new bootinfo RESTART command
      telling pxeboot to re-DHCP and use the new info obtained (next-server) to
      contact a potentially new boss node.  This is a quick way to switch a node
      in PXEWAIT from talking to the outer boss to talking to the inner one.
      
      A significant number of rinky-dink changes were needed to do this, primarily
      adding a new state, PXELIMBO, where nodes can be sent to sit until they are
      restarted.  It turns out, just putting them in an existing state such as
      PXEWAKEUP or SHUTDOWN wouldn't work, as they tend to timeout or otherwise
      reboot.
      6feda7d3
  5. 12 Oct, 2009 1 commit
    • David Johnson's avatar
      Add the ability to load images on virtnodes. For now, we just overload · c6c57bc9
      David Johnson authored
      the tb-set-node-os command with a second optional argument; if that is
      present, the first arg is the child OS and the second is the parent OS.
      We add some new features in ptopgen (OS-parentOSname-childOSname) based
      off a new table that maps which child OSes can run on which parents, and
      the right desires get added to match.  We setup the reloads in os_setup
      along with the parents.  Also needed a new opmode, RELOAD-PCVM, to handle
      all this.
      
      For now, users only have to specify that their images can run on pcvms, a
      special hack for which type the images can run on.  This makes sense in
      general since there is no point conditionalizing childOS loading on
      hardware type at the moment, but rather on parentOS.  Hopefully this stuff
      wiill mostly work on shared nodes too, although we'll have to be more
      aggressive on the client side garbage collecting old frisbee'd images for
      long-lived shared hosts.
      
      I only made these changes in libvtop, so assign_wrapper folks are left in
      the dark.
      
      Currently, the client side supports frisbee.  Only in openvz for now, and
      this probably breaks libvnode_xen.pm.  Also in here are some openvz
      improvements, like ability to sniff out which network is the public
      control net, and which is the fake virtual control net.
      c6c57bc9
  6. 02 Feb, 2009 1 commit
  7. 16 Aug, 2007 1 commit
  8. 29 Mar, 2006 1 commit
  9. 15 Nov, 2004 1 commit
  10. 29 Oct, 2004 1 commit
    • Leigh Stoller's avatar
      Such a brutal ElabinElab hack ... When trying to swapin an actual · 0749ef9c
      Leigh Stoller authored
      experiment from the web interface, I ran into another control network
      problem, this time in bootinfo. When a node is sitting free, it waits
      in pxeboot for a bootinfo packet from boss to tell it what to do (this
      is different then when the node is allocated, and bootinfo tells it
      what to do in a reply to the initial request). In the PXEWAIT case, we
      *send* it a packet, addressed to its *control network* address, which
      in the inner DB, is on the inner control network, but of course PXE is
      really using the outer control network, so packets addressed to inner
      control network are never seen by pxeboot.
      
      This is the only (known) case of this happening, and rather then try
      for some general, over engineered solution, I did something unusual,
      and put in a hack, ifdefed for ELABINELAB (meaning, its an inner
      elab). I know, you're thinking, how could he have done such a thing,
      its so unlike him!
      
      Well, it was damn easy! Anyway, this little hack checks the DB for an
      interface tagged as role='outer_ctrl' and uses that IP instead of the
      inner control network. When I create the inner DB from the outer DB, I
      was already leaving the outer control network in place so that
      bootinfo could find the proper node (again, cause the bootinfo request
      packets are coming from the outer control network, and so its IP would
      not match any nodes in the DB).
      
      I'd like to say that this is the last problem with swapin, but I see
      in my other window that the event scheduler failed to start on inner
      ops with some silly error ssh permission denied error. Whats that all
      about?
      0749ef9c
  11. 21 Jan, 2004 1 commit
  12. 12 Jan, 2004 3 commits
    • Leigh Stoller's avatar
      Change to REUSEPORT instead of REUSEADDR! · a2f3e045
      Leigh Stoller authored
      a2f3e045
    • Leigh Stoller's avatar
      aeb80b9c
    • Leigh Stoller's avatar
      Death to proxydhcp; one less specialized daemon. DHCP will return the · 2b2b8ca1
      Leigh Stoller authored
      filename to boot, and all local nodes will boot the same pxeboot kernel,
      which has been extended to allow for jumping directly into a specific MFS
      (in addition to the usual testbed boot into a partition or multiboot
      kernel).
      
      Bootinfo and the bootwhat protocol extended to tell the client node what
      MFS to jump into directly, without a reboot. pxe_boot_path and
      next_pxe_boot_path are now deprecated, with bootinfo used to control which
      MFS to boot. Nodes now boot a single pxeboot kernel, and bootinfo tells
      them what to do next.
      
      Bootinfo greatly simplifed. temp_boot_osid has been added to allow for
      temporary booting of different kernels (such as with ndoe_admin or
      create_image). Unlike next_boot_osid which is a one-shot boot,
      temp_boot_osid causes the node to boot that OS until told not too.
      
      next_boot_path and def_boot_path in the nodes table are now ignored.
      Bootinfo gets path info strictly from the os_info table entry for the osid
      given in one of def_boot_osid, temp_boot_osid, or next_boot_osid.  This
      makes the selection of what to do in bootinfo a lot simpler (and for
      TBBootWhat in libdb). The os_info table also modified to include an MFS
      flag so that bootinfo knows to tell the client that the path refers to an
      MFS and not a multiboot kernel.
      
      Change to boot sequence; free nodes no longer boot into the default OSID.
      Instead, they are told to wait in pxeboot until told what to do, which
      will typically be when the node is allocated and a specific OSID
      picked. If the node needs to be reloaded, then the node is told to jump
      directly into the Frisbee MFS, which saves one complete reboot cycle
      whether the node has the requested OS installed, or not.  New program
      added called "bootinfosend" that is used by node_reboot to "wake up" up
      nodes sitting in pxewait mode, so that they query bootinfo again and boot.
      
      node_reboot changed to look at the event state of a node, and use
      bootinfosend to wake up nodes, rather then power cycle, since pxeboot does
      not repsond to pings. Retry (if the UDP packet is lost) is handled by
      stated.
      
      Event support added to bootinfo, to replace the event generation that was
      in proxydhcp. I have not included the caching that Mac had in proxydhcp
      since it does not appear that bootinfo packets are lost very
      often. Cleaned up all of the event and DB queury code to use lib/libtb for
      DB access, and moved all of the event code into a separate file.  The
      event sequence when a node boots now looks like this:
      
      	'SHUTDOWN'    --> 'PXEBOOTING'  (BootInfo)
      	'PXEBOOTING', --> 'PXEBOOTING'  (BootInfo Retry)
      	'PXEBOOTING', --> 'BOOTING'     (Node Not Free)
      	'PXEBOOTING', --> 'PXEWAIT'     (Node is Free)
      	'PXEWAIT',    --> 'PXEWAKEUP'   (Node Allocated)
      	'PXEWAKEUP',  --> 'PXEWAKEUP'   (Bootinfo Retry)
      	'PXEWAKEUP',  --> 'PXEBOOTING'  (Node Woke Up)
      
      Change stated to support resending PXEWAKEUP events when node times out.
      After 3 tries, node is power cycled. Other minor cleanup in stated.
      
      Clean up and simplify os_select, while adding support for temp_next_boot
      and removing all trace of def_boot_path and next_boot_path processing.
      Remove all pxe_boot_path and next_pxe_boot_path processing.  Changed
      command line interface to support "clearing" fields. For example,
      node_admin changed to call os_select like this to have the node
      temporarily boot the FreeBSD MFS:
      
      	os_select -t FREEBSD-MFS pcXXX
      
      which sets temp_boot_osid. To turn admin mode off:
      
      	os_select -c -t pcXXX
      
      which says to clear temp_boot_osid.
      
      sql/database-fill-supplemental.sql modifed to add os_info table
      entries for the FreeBSD, Frisbee, and newnode MFS's.
      
      Be sure to change dhcpd config, restart dhcp, kill proxydhcp, restart
      bootinfo,
      2b2b8ca1