1. 25 Jan, 2005 2 commits
  2. 24 Jan, 2005 7 commits
    • Leigh Stoller's avatar
      Add stuff · 43553e59
      Leigh Stoller authored
      43553e59
    • Russ Fish's avatar
      Use Ops/FS as the Samba server. More tweaks. · a0c3aaf4
      Russ Fish authored
      a0c3aaf4
    • Timothy Stack's avatar
      · 3c1a5bad
      Timothy Stack authored
      Robot related stuff: power via e-mail, client-install fixups, checking
      coords against camera boundaries.
      
      	* configure, configure.in: Add tbsetup/power_mail.pm to the list
      	of template files.
      
      	* doc/cross-compiling.txt: More stargate notes.
      
      	* event/sched/rpc.cc: Updates for the addition of the cameras
      	table.
      
      	* robots/GNUmakefile.in, robots/emc/GNUmakefile.in,
      	robots/mtp/GNUmakefile.in, robots/rmcd/GNUmakefile.in,
      	robots/tbsetdest/GNUmakefile.in, robots/vmcd/GNUmakefile.in:
      	client-install fixups.
      
      	* tbsetup/GNUmakefile.in: Add power_mail.pm.
      
      	* tbsetup/os_setup.in: Don't skip reboot of robots anymore.
      
      	* tbsetup/power.in: Add special case for a power_id of "mail",
      	which calls into the power_mail.pm backend.
      
      	* tbsetup/power_mail.pm.in: E-mail backend for power, it sends an
      	e-mail to tbops and waits for the outlets.last_power value to be
      	updated from the power.php3 web page.
      
      	* tbsetup/ns2ir/parse-ns.in: Add the contents of the cameras table
      	to the TBCOMPAT namespace.
      
      	* tbsetup/ns2ir/sim.tcl.in: More checking of "setdest" inputs.
      
      	* tbsetup/ns2ir/topography.tcl: Update the checkdest method to
      	check destination points against the camera list.
      
      	* www/powertime.php3: Webpage used to update the last power time
      	for nodes.
      
      	* www/shownode.php3: Add "Update Power Time" menu button.
      3c1a5bad
    • Robert Ricci's avatar
    • Leigh Stoller's avatar
      Bottom line on this commit: Do not update the nodetypeXpid_permissions · 775ca147
      Leigh Stoller authored
      table by hand anymore! Update the group_policies table and then run
      the script to update the permissions table (sbin/update_permissions).
      
      Details:
      
      My original thought when I started this was that I would be able to
      replace the existing nodetypeXpid_permissions table with this new
      stuff. Well, it turns out that this was not a good thing to do, for a
      couple of reasons:
      
        * Engineering: We access the nodetypeXpid_permissions table from three
          different languages, and no way I wanted to rewrite this library in
          in python and php!
      
        * Performance: We access the nodetypeXpid_permissions from the web
          interface, on every single page load. In fact, we access it twice if
          if you count the FreePCs() count that we put at the top of the menu.
          Going through this library on each page load would be a serious drag.
      
      So, rather then actually get rid of the nodetypeXpid_permissions table, I
      decided to keep it as a "cache" of permissions stored in the group
      policies table. Each time you update the policy tables, we need to run
      the update_permissions script which will call into this library (see the
      TBUpdateNodeTypeXpidPermissions() routine) to reconstruct the permissions
      table. I have whacked the grantnodetype script to do exactly that.
      
      Note that we could proably do the same thing for users by creating an
      equivalent nodetypeXuid_permissions table, mapping users to types they
      are allowed to use. That would be a lot rows, but the amount of data in
      the table is small. That would give us very fine grained control of what
      we show people in the web interface. Not sure it is worth it though.
      
      I also added some instructions to previous commit in database-migrate.txt
      on populating the new group_policies table from the existing
      permissions table.
      775ca147
    • Timothy Stack's avatar
      e5cb651a
    • Timothy Stack's avatar
      Add more notes about the garcia's stargate and getting startup closer to · e5938c23
      Timothy Stack authored
      working completely.
      e5938c23
  3. 22 Jan, 2005 4 commits
    • Timothy Stack's avatar
      Add robot map and webcam image · 44624909
      Timothy Stack authored
      44624909
    • Timothy Stack's avatar
      da74d108
    • Timothy Stack's avatar
      · 74f61a9f
      Timothy Stack authored
      More robot stuff, start in on path planning and cleanup rmcd a bit.
      
      	* robots/emc/emcd.c: Update for obstacle-related changes in mtp.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.h, robots/mtp/mtp.c,
      	robots/mtp/mtp_send.c: Add messages for requesting/reporting robot
      	sensor contacts, plus some cosmetic changes to the obstacle_config
      	structure.
      
      	* robots/primotion/garcia-pilot.cc,
      	robots/primotion/pilotClient.hh, robots/primotion/pilotClient.cc:
      	Add support for sending "contact" reports, which contain points
      	where the sensors have detected an object.
      
      	* robots/rmcd/GNUmakefile.in, robots/rmcd/obstacles.h,
      	robots/rmcd/obstacles.c, robots/rmcd/pilotConnection.h,
      	robots/rmcd/pilotConnection.c, robots/rmcd/rclip.h,
      	robots/rmcd/rclip.c, robots/rmcd/rmcd.c: Cleanup and add in some
      	obstacle avoidance.
      74f61a9f
    • Timothy Stack's avatar
      Fix ordering of coordinates when generating obstacle lines in the · d3910751
      Timothy Stack authored
      emcd.config file
      d3910751
  4. 21 Jan, 2005 5 commits
  5. 20 Jan, 2005 9 commits
  6. 19 Jan, 2005 5 commits
  7. 18 Jan, 2005 7 commits
    • Timothy Stack's avatar
      Initialize the camera boundaries. · cb66c26d
      Timothy Stack authored
      cb66c26d
    • Timothy Stack's avatar
      Fix subtle dependency problem with tevc and libevent.a, building tevc · 1803d68f
      Timothy Stack authored
      is apparently what triggers libevent.a to be built in the ../lib
      directory.
      1803d68f
    • Leigh Stoller's avatar
      Here is a checkpoint of the admission control stuff I have been working on. · 54f55585
      Leigh Stoller authored
      The last part is the stuff to hook it in from assign_wrapper, and some
      additional support in assign that Rob is adding for me. This comment is
      from the top of new file db/libadminctrl.pm.in and describes everything in
      detail.
      
      # Admission control policies. These are the ones I could think of, although
      # not all of these are implemented.
      #
      #  * Number of experiments per type/class (only one expt using robots).
      #
      #  * Number of experiments per project
      #  * Number of experiments per subgroup
      #  * Number of experiments per user
      #
      #  * Number of nodes per project      (nodes really means pc testnodes)
      #  * Number of nodes per subgroup
      #  * Number of nodes per user
      #
      #  * Number of nodes of a class per project
      #  * Number of nodes of a class per group
      #  * Number of nodes of a class per user
      #
      #  * Number of nodes of a type per project
      #  * Number of nodes of a type per group
      #  * Number of nodes of a type per user
      #
      #  * Number of nodes with attribute(s) per project
      #  * Number of nodes with attribute(s) per group
      #  * Number of nodes with attribute(s) per user
      #
      # So we have group (pid/gid) policies and user policies. These are stored
      # into two different tables, group_policies and user_policies, indexed in
      # the obvious manner. Each row of the table defines a count (experiments,
      # nodes, etc) and a type of thing being counted (experiments, nodes, types,
      # classes, etc). When we test for admission, we look for each matching row
      # and test each condition. All conditions must pass. No conditions means a
      # pass. There is also some "auxdata" which holds extra information needed
      # for the policy (say, the type of node being restricted).
      #
      #      uid:     a uid
      #   policy:     'experiments', 'nodes', 'type', 'class', 'attribute'
      #    count:     a number
      #  auxdata:     a string (optional)
      #
      # Example: A user policy of ('mike', 'nodes', 10) says that poor mike is
      # not allowed to have more 10 nodes at a time, while ('mike', 'type',
      # '10', 'pc850') says that mike cannot allocate more than 10 pc850s.
      #
      # The group_policies table:
      #
      #      pid:     a pid
      #      gid:     a gid
      #   policy:     'experiments', 'nodes', 'type', 'class', 'attribute'
      #    count:     a number
      #  auxdata:     a string (optional)
      #
      # Example: A project policy of ('testbed', 'testbed', 'experiments', 10)
      # says that the testbed project may not have more then 10 experiments
      # swapped in at a time, while ('testbed', 'TG1', 'nodes', 10) says that the
      # TG1 subgroup of the testbed project may not use more than 10 nodes at
      # time.
      #
      # In addition to group and user policies (which are policies that apply to
      # specific users/projects/subgroups), we also need policies that apply to
      # all users/projects/subgroups (ie: do not want to specify a particular
      # restriction for every user!). To indicate such a policy, we use a special
      # tag in the tables (for the user or pid/gid):
      #
      #      '+'  -  The policy applies to all users (or project/groups).
      #
      # Example: ('+','experiments',10) says that no user may have more then 10
      # experiments swapped in at a time. The rule overrides anything more
      # specific (say a particular user is restricted to 20 experiments; the above
      # rule overrides that and the user (all users) is restricted to 10.
      #
      # Sometimes, you want one of these special rules to apply to everyone, but
      # *allow* it to be overridden by a more specific rule. For that we use:
      #
      #      '-'  -  The policy applies to all users (or project/groups),
      #              but can be overridden by a more specific rule.
      #
      # Example: The rules:
      #
      #	('-','type',0, 'garcia')
      #       ('testbed', 'testbed', 'type', 10, 'garcia')
      #
      # says that no one is allowed to allocate garcias, unless there is specific
      # rule that allows it; in this case the testbed project can allocate them.
      #
      # There are other global policies we would like to enforce. For example,
      # "only one experiment can be using the robot testbed." Encoding this kind
      # of policy is harder, and leads down a path that can get arbitrarily
      # complex. Tha path leads to ruination, and so we want to avoid it at
      # all costs.
      #
      # Instead we define a simple global policies table that applies to all
      # experiments currently active on the testbed:
      #
      #   policy:     'nodes', 'type', 'class', 'attribute'
      #     test:     'max', others I cannot think of right now ...
      #    count:     a number
      #  auxdata:     a string
      #
      # Example: A global policy of ('nodes', 'max', 10, '') say that the maximum
      # number of nodes that may be allocated across the testbed is 10. Thats not
      # a very realistic policy of course, but ('type', 'max', 1, 'garcia') says
      # that a max of one garcia can be allocated across the testbed, which
      # effectively means only one experiment will be able to use them at once.
      # This is of course very weak, but I want to step back and give it some
      # more thought before I redo this part.
      #
      # Is that clear? Hope so, cause it gets more complicated. Some admission
      # control tests can be done early in the swap phase, before we really do
      # anything (before assign_wrapper). Others (type and class) tests cannot
      # be done here; only assign can figure out how an experiment is going to map
      # to physical nodes (remember virtual types too), and in that case we need
      # to tell assign what the "constraints" are and let it figure out what is
      # possible.
      #
      # So, in addition to the simple checks we can do, we also generate an array
      # to return to assign_wrapper with the maximum counts of each node type and
      # class that is limited by the policies. assign_wrapper will dump those
      # values into the ptop file so that assign can enforce those maximum values
      # regardless of what hardware is actually available to use. As per discussion
      # with Rob, that will look like:
      #
      #	set-type-limit <type> <limit>
      #
      # and assign will spit out a new type of violation that assign_wrapper will
      # parse.
      #
      # NOTES:
      #
      #  1) Admission control is skipped in admin mode; returns okay.
      #  2) Admission control is skipped when the pid is emulab-ops; returns okay.
      #  3) When calculating current usage, nodes reserved to emulab-ops are
      #     ignored.
      #  4) The sitevar "swap/use_admission_control" controls the use of admission
      #     control; defaults to 1 (on).
      #  5) The current policies can be viewed in the web interface. See
      #     https://www.emulab.net/showpolicies.php3
      #  6) The global policy stuff is weak. I plan to step back and think about it
      #     some more before redoing it, but it will tide us over for now.
      #
      54f55585
    • Mike Hibler's avatar
      602e1c6d
    • Mike Hibler's avatar
    • Timothy Stack's avatar
      More tweaks and some comments. · c8defd13
      Timothy Stack authored
      c8defd13
    • Leigh Stoller's avatar
      443582dc
  8. 17 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · 1e18722e
      Timothy Stack authored
      More robot tweaks:
      
      	* event/sched/event-sched.c: Start rmcd, then vmcd.
      
      	* event/sched/rpc.cc: Add camera dimensions to the config file.
      
      	* robots/emc/emcd.c: Add camera dimensions to the config file and
      	destroy vmc's position_list when it disconnects.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.c: Add dimensions to the camera
      	config and add a command_id field to the update_position packet.
      
      	* robots/primotion/garcia-pilot.cc: Move the decl of the acpGarcia
      	object below daemon(3) since it doesn't seem to like it when the
      	parent process dies and fix the log file creation.
      
      	* robots/primotion/pilotClient.cc: Pass the command_id back in any
      	update_position packets.
      
      	* robots/rmcd/rmcd.c: Use the command-id to distinguish between
      	STOPs for the sake of a GOTO and a wiggle.
      
      	* robots/vmcd/visionTrack.h, robots/vmcd/visionTrack.c: Only
      	coalesce packets from different cameras (duh) and mess with the
      	tolerances a little more.
      
      	* xmlrpc/emulabserver.py.in: Add some rough camera dimensions.
      1e18722e