1. 24 Sep, 2012 1 commit
    • Eric Eide's avatar
      Replace license symbols with {{{ }}}-enclosed license blocks. · 6df609a9
      Eric Eide authored
      This commit is intended to makes the license status of Emulab and
      ProtoGENI source files more clear.  It replaces license symbols like
      "EMULAB-COPYRIGHT" and "GENIPUBLIC-COPYRIGHT" with {{{ }}}-delimited
      blocks that contain actual license statements.
      
      This change was driven by the fact that today, most people acquire and
      track Emulab and ProtoGENI sources via git.
      
      Before the Emulab source code was kept in git, the Flux Research Group
      at the University of Utah would roll distributions by making tar
      files.  As part of that process, the Flux Group would replace the
      license symbols in the source files with actual license statements.
      
      When the Flux Group moved to git, people outside of the group started
      to see the source files with the "unexpanded" symbols.  This meant
      that people acquired source files without actual license statements in
      them.  All the relevant files had Utah *copyright* statements in them,
      but without the expanded *license* statements, the licensing status of
      the source files was unclear.
      
      This commit is intended to clear up that confusion.
      
      Most Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the Affero GNU General Public License, version 3
      (AGPLv3).
      
      Most Utah-copyrighted files related to ProtoGENI are distributed under
      the terms of the GENI Public License, which is a BSD-like open-source
      license.
      
      Some Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the GNU Lesser General Public License, version 2.1
      (LGPL).
      6df609a9
  2. 27 Jul, 2011 1 commit
  3. 12 Jan, 2007 1 commit
  4. 01 Dec, 2006 1 commit
  5. 18 Jul, 2006 1 commit
  6. 29 Mar, 2006 1 commit
  7. 29 Aug, 2005 1 commit
  8. 08 Aug, 2005 1 commit
  9. 27 Jun, 2005 1 commit
  10. 25 Jun, 2005 1 commit
  11. 06 Jun, 2005 2 commits
  12. 04 Jun, 2005 1 commit
  13. 02 Jun, 2005 1 commit
  14. 01 Jun, 2005 2 commits
  15. 31 May, 2005 3 commits
  16. 27 May, 2005 1 commit
  17. 25 May, 2005 1 commit
  18. 24 May, 2005 1 commit
  19. 23 May, 2005 3 commits
    • Russ Fish's avatar
      Run-scripts for /etc/init.d · e84b8467
      Russ Fish authored
      e84b8467
    • Russ Fish's avatar
    • Timothy Stack's avatar
      · a1000b60
      Timothy Stack authored
      Some RMCD debugging and improvements.
      
      	* robots/emc/GNUmakefile.in, robots/rmcd/GNUmakefile.in: Fix some
      	of the dependencies.
      
      	* robots/emc/emcd.c: Bump default speed for events to 0.2 m/s.
      	Send an event when a dynamic obstacle is updated.
      
      	* robots/emc/emcd.h: Send position updates three times a second.
      
      	* robots/mtp/listNode.h, robots/mtp/listNode.c: Add a function to
      	prepend a list onto another.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.h, robots/mtp/mtp.c: Add
      	support for sending updates concerning dynamically detected
      	obstacles.
      
      	* robots/rmcd/masterController.h, robots/rmcd/masterController.c:
      	When a robot is stationary, add it as an obstacle.  Play with the
      	pause time a bit.
      
      	* robots/rmcd/obstacles.h, robots/rmcd/obstacles.c: Add robots as
      	a third type of obstacle.  Do not expand static obstacles when the
      	robot detects something with its sensors.  Add some more checks to
      	make sure the obstacle list is sane.  When
      	creating/growing/removing dynamic obstacles, send a notification
      	to emcd so it can be passed on to the applet.  More comments.
      
      	* robots/rmcd/pathPlanning.h, robots/rmcd/pathPlanning.c: When
      	monkeying with the obstacle list, we need to make sure the
      	obstacles are put back in the right order (dynamic before static).
      	More comments.
      
      	* robots/rmcd/pilotConnection.c: Add some more stuff to the
      	SIGINFO print out.
      
      	* robots/rmcd/rmcd.c: Initialize the emcd mtp handle for sending
      	updates for obstacles.
      
      	* robots/mtp/mtp_dump.c, robots/vmcd/visionTrack.c: Remove macros
      	that are now defined elsewhere.
      a1000b60
  20. 20 May, 2005 1 commit
  21. 18 May, 2005 1 commit
  22. 16 May, 2005 1 commit
    • Timothy Stack's avatar
      · d4549631
      Timothy Stack authored
      Checkpoint some robot code, mostly related to reliability.
      
      	* robots/emc/emcd.c: Fail if there is no config file given.  Send
      	an error back to vmcd if there is no rmcd available to satisfy a
      	wiggle-request.
      
      	* robots/mtp/mtp.h, robots/mtp/mtp.c: Added some comments.  Add
      	some more helper functions.
      
      	* robots/primotion/GNUmakefile.in, robots/primotion/dashboard.hh,
      	robots/primotion/dashboard.cc, robots/primotion/faultDetection.hh,
      	robots/primotion/faultDetection.cc: Fault detection code for the
      	garcia.  Tries to check for and recover from some commonly seen
      	failures.
      
      	* robots/primotion/garcia-pilot.hh,
      	robots/primotion/garcia-pilot.cc:  Set the fault detection
      	callback, add version info, and fix some whitespace.
      
      	* robots/primotion/pilotClient.cc: Set the wheel speed when
      	pivoting.
      
      	* robots/primotion/wheelManager.hh,
      	robots/primotion/wheelManager.cc: Use the fault detection stuff,
      	tweak some constants, and some other cleanup.
      
      	* robots/tracker/GNUmakefile.in: Add some missing targets.
      
      	* robots/vmcd/robotObject.h, robots/vmcd/robotObject.c: Move some
      	robot list management code into here.
      
      	* robots/vmcd/visionTrack.h, robots/vmcd/visionTrack.c: Comments
      	and some cleanup.
      
      	* robots/vmcd/vmcd.c: Refactor some of the wiggle code and deal
      	with errors a little better.
      d4549631
  23. 10 May, 2005 3 commits
  24. 28 Apr, 2005 1 commit
  25. 22 Apr, 2005 1 commit
  26. 08 Apr, 2005 1 commit
  27. 07 Apr, 2005 1 commit
  28. 31 Mar, 2005 1 commit
    • Timothy Stack's avatar
      · 6cce1762
      Timothy Stack authored
      Pass camera local to world offsets through vmcd.
      
      	* event/sched/rpc.cc: Add the camera fixed_x,fixed_y values to the
      	emcd.config file.
      
      	* robots/emc/emcd.c: Pickup the cameras fixed_x,fixed_y values
      	from the config file.  Add supports for setting the speed of the
      	robot.
      
      	* robots/mtp/mtp.h, robots/mtp/mtp.c: Add support for setting
      	speed in GOTO packets and constructing vmc-client config packets.
      
      	* robots/mtp/mtp.x: Add a vmc-client config packet that contains
      	the cameras origin in world coordinates.
      
      	* robots/mtp/mtp_dump.c: Dump the min/max values for x and y,
      	handy for figuring out the bounds of the camera.
      
      	* robots/vmcd/visionTrack.c, robots/vmcd/visionTrack.h: Handle
      	cameras that are overlapping on two axes.
      
      	* robots/vmcd/vmc-client.c: Accept a vmc-client config packet that
      	tells us where the camera is in world coordinates.  Add an
      	orientation flag that specifies how the camera is oriented wrt to
      	the world coordinate system.
      
      	* robots/vmcd/vmcd.c: Send vmc-client config packets out.  Fix a
      	bug that left unknown tracks in the previous frame, which could
      	confuse the matching algorithm causing it to match unknown tracks
      	instead of valid known tracks.
      6cce1762
  29. 18 Mar, 2005 3 commits
  30. 16 Mar, 2005 1 commit