Commit f03b9c86 authored by Leigh Stoller's avatar Leigh Stoller

Remove PXE stuff and replace with simple "filename" directive to have

clients load the pxeboot kernel. Proxydhcp is dead.
parent b113d029
......@@ -22,38 +22,11 @@ max-lease-time 36000; # 10 hours
ddns-update-style none; # req'd vers 3 directive
# NOTE: You should not need to change any of the PXE options below
# Define the PXE option space
# Code 1: Multicast IP address of bootfile
# Code 2: UDP port that client should monitor for MTFTP responses
# Code 3: UDP port that MTFTP servers are using to listen for MTFTP requests
# Code 4: Number of secondes a client must listen for activity before trying
# to start a new MTFTP transfer
# Code 5: Number of secondes a client must listen before trying to restart
# a MTFTP transfer
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option PXE.discovery-control code 6 = unsigned integer 8;
option PXE.discovery-mcast-addr code 7 = ip-address;
# Place clients in the PXE class when booting from the PXE ROM. For some PXE
# clients, We have to set at least one option - if they fail to dchp, try
# uncommenting the two lines below.
class "PXE" {
match if substring (option vendor-class-identifier, 0, 9) = "PXEClient";
option vendor-class-identifier "PXEClient";
# vendor-option-space PXE;
# option PXE.mtftp-ip 0.0.0.0;
}
subnet 155.101.132.0 netmask 255.255.252.0 {
option subnet-mask 255.255.252.0;
option routers 155.101.132.1;
filename "/tftpboot/pxeboot.emu";
# Example of a dynamic range. If you uncomment the following line
# (after changing the IP addresses to suitable ones, of course)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment