Commit d98651c9 authored by Leigh Stoller's avatar Leigh Stoller

Change 2610 to 2620 ...

parent a16188eb
......@@ -126,30 +126,30 @@ Setting up an InstaGeni Rack. First, we need the following info:
and try again. Might take another iteration or two. When you have the
prompt:
2610> config
2610(config)> vlan 11
2610(vlan-11)> name control-alternate
2610(vlan-11)> untagged 24 XXXX Make sure about port number!
2610(vlan-11)> ip address 10.2.1.253/24
2610(vlan-11)> exit
2610(config)> vlan 10
2610(vlan-10)> name control-hardware
2610(vlan-10)> untagged 23 XXXX Make sure about port number!
2610(vlan-10)> ip address 10.1.1.253/24
2610(vlan-10)> exit
2610(config)> vlan 1
2610(vlan-1)> ip address 10.254.254.253/24 # IGMP querier requires this
2610(vlan-1)> exit
2610(config)> management-vlan 10
2610(config)> ip default-gateway 10.1.1.254
2610(config)> vlan 1 ip igmp
2610(config)> vlan 1 ip igmp querier
2610(config)> no web-management
2610(config)> no snmp-server community public
2610(config)> snmp-server community XXXXX manager unrestricted
2610(config)> password all (type in same password for manager/operator)
2610(config)> write memory
2610(config)> reload
2620> config
2620(config)> vlan 11
2620(vlan-11)> name control-alternate
2620(vlan-11)> untagged 24 XXXX Make sure about port number!
2620(vlan-11)> ip address 10.2.1.253/24
2620(vlan-11)> exit
2620(config)> vlan 10
2620(vlan-10)> name control-hardware
2620(vlan-10)> untagged 23 XXXX Make sure about port number!
2620(vlan-10)> ip address 10.1.1.253/24
2620(vlan-10)> exit
2620(config)> vlan 1
2620(vlan-1)> ip address 10.254.254.253/24 # IGMP querier requires this
2620(vlan-1)> exit
2620(config)> management-vlan 10
2620(config)> ip default-gateway 10.1.1.254
2620(config)> vlan 1 ip igmp
2620(config)> vlan 1 ip igmp querier
2620(config)> no web-management
2620(config)> no snmp-server community public
2620(config)> snmp-server community XXXXX manager unrestricted
2620(config)> password all (type in same password for manager/operator)
2620(config)> write memory
2620(config)> reload
UTAH: THE PASSWORD and COMMUNITY string come from variables.txt file
in the rack subdir. Use the same for both switches.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment