Commit b646252c authored by Jay Lepreau's avatar Jay Lepreau

Change testbed-ops@emulab.net to @flux.utah.edu

parent 87c59489
......@@ -15,7 +15,7 @@ individual scripts should be sufficient explanation. The end of the
file also has some overview-ish stuff about abstractions and things
like that.
[This file maintained by testbed-ops@emulab.net]
[This file maintained by testbed-ops@flux.utah.edu]
For big picture and some details, read the OSDI'02 paper, in
doc/papers/netbed-osdi02* and on the Web.
......
......@@ -18,7 +18,7 @@ in DOS partition #2.
You will need to have the Emulab network-booted, memory-filesystem-based,
FreeBSD systems (hereafter known as the MFSes). If you have not done this
yet, do it now. If you do not know what I am talking about, contact
testbed-ops@emulab.net.
testbed-ops@flux.utah.edu.
In particular, the customization of the disk partitions is done using a
node booted into the "admin" MFS. If you have followed the Emulab setup
......@@ -66,7 +66,7 @@ We will assume the machine is called "pc1" in the following directions.
probably be "ad4". RAID controllers are variously things like: "ar",
"aacd", "twed", depending on the controller you have. If you cannot
find anything in the output that looks like a disk, you may have an
unsupported disk controller. Contact testbed-ops@emulab.net if this
unsupported disk controller. Contact testbed-ops@flux.utah.edu if this
happens (and be sure to have your "dmesg" output handy!)
If your disk is anything other than "ad0", there are several files
......@@ -361,7 +361,7 @@ Dealing with SCSI disks (or RAID).
Otherwise, you need to build your own kernels. You can look at output from
the admin MFS (aka GENERIC) kernel if necessary. Add the necessary driver
to the various TESTBED configs in the kernel source, and rebuild and install
the kernels in the image. Mail testbed-ops@emulab.net for more info.
the kernels in the image. Mail testbed-ops@flux.utah.edu for more info.
* For Linux, it is even more of a PITA. We currently don't even have a
generic Linux kernel in the image. So if Linux doesn't boot in the image,
......
......@@ -105,7 +105,7 @@ cd /usr/ports/lang/ezm3 && make install
If you run into any other problems, consult, in this order:
(1) 'man 7 ports'
(2) http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/
(3) testbed-ops@emulab.net
(3) testbed-ops@flux.utah.edu
Now, just copy the contents of /usr/ports/packages/All/ into the directory you
picked above!
......
......@@ -73,7 +73,7 @@ On occasion, you may need to update the Emulab software in the disk loader
console).
7. All done! If there are any problems, copy back the saved mfsroot
file (and rerun prepare) and contact testbed-ops@emulab.net for
file (and rerun prepare) and contact testbed-ops@flux.utah.edu for
help.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment