Commit 8de3a940 authored by Mike Hibler's avatar Mike Hibler

Explain some of the new variables just added.

parent 72e2f95f
......@@ -77,6 +77,65 @@ FSDIR_USERS=/users
FSDIR_SHARE=/share
FS_WITH_QUOTAS="/q /groups /users"
#
# SSL Certificate stuff. Used to customize config files in ssl directory.
# Note that OrganizationalUnit is set in the cnf file.
# CommonName is typically set to BOSSNODE and emailAddress to TBOPSEMAIL
#
SSLCERT_COUNTRY="US"
SSLCERT_STATE="Utah"
SSLCERT_LOCALITY="Salt Lake City"
SSLCERT_ORGNAME="Utah Network Testbed"
#
# Control network configuration stuff.
# Used primarily to generate initial named and dhcpd config files.
# See doc/setup-network.txt for definitions of the private, public and
# control segments.
#
#
# Boss and users node IP addresses on the control network.
# For boss this is an address on the private segment of the control net.
# For users this is an address on the public segment of the control net.
#
BOSSNODE_IP=155.98.32.70
USERNODE_IP=155.98.33.74
#
# The overall control network range
#
TESTBED_NETWORK=155.98.32.0
TESTBED_NETMASK=255.255.240.0
#
# The node control network segment.
#
CONTROL_ROUTER_IP=155.98.36.1
CONTROL_NETWORK=155.98.36.0
CONTROL_NETMASK=255.255.252.0
#
# The private network segment.
#
PRIVATE_NETWORK=155.98.32.0
PRIVATE_ROUTER=155.98.32.1
PRIVATE_NETMASK=255.255.255.0
#
# The public network segment.
#
PUBLIC_NETWORK=155.98.33.0
PUBLIC_ROUTER=155.98.33.1
PUBLIC_NETMASK=255.255.255.0
#
# A range of addresses within the node control network segment
# to use for new nodes being added to the testbed.
# You need at least one.
#
DHCPD_DYNRANGE="155.98.36.200 155.98.36.249"
#
# You shouldn't have to change anything below this point
#
......@@ -91,3 +150,4 @@ DISABLE_NSE=1
# Sometimes the main page is down in a directory on WWWHOST
# No trailing '/'!
#WWW=www.example.emulab.net/emulab-www
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment