Commit 69fcce51 authored by Mike Hibler's avatar Mike Hibler

Tweak to example.

Make a version of the example which shows an unroutable control network.
parent 5e32ec28
......@@ -130,7 +130,7 @@ FSNODE_IP=$USERNODE_IP
#
EXTERNAL_BOSSNODE_IP=$BOSSNODE_IP
EXTERNAL_USERNODE_IP=$USERNODE_IP
EXTERNAL_FSNODE_IP=$USERNODE_IP
EXTERNAL_FSNODE_IP=$EXTERNAL_USERNODE_IP
#
# Network definitions - see doc/setup-network.txt for a description of how
......
#
# This is an example definitions file for configure.
#
# This version has a non-routable control network; i.e., nodes must be
# accessed via the multi-homed, publically routable "users" node.
# The control network looks like:
#
# Complete: 192.168.0/22
# "public" segment: 192.168.3/24
# "private" segment: 192.168.2/24
# "node control segment: 192.168.0/23 (aka: 192.168.0/24, 192.168.1/24)
#
# This configuration requires a router/firewall between the segments
# (addreses 192.168.{0,2,3}.1).
#
# Use the --with-TBDEFS=filename to specify your own file.
# If you add a variable, be sure to go and update configure.in.
#
# The name of this installation
THISHOMEBASE=Example.Emulab.Net
#
# Various domain and host names
#
# Host name of our web server (or host:port)
WWWHOST=www.example.emulab.net
# Fully-quailified hostname of the boss node
BOSSNODE=boss.example.emulab.net
# Fully-quailified hostname of the ops (also called users) node
USERNODE=ops.example.emulab.net
# Fully-quailified hostname of the fileserver (will probably be the same
# as the ops node)
FSNODE=fs.example.emulab.net
#
# Minimum Unix uid and gid values for Emulab users.
# Emulab will create the initial user with these values and all additional
# users will have values greater than these. It would be unwise to make
# these less than 1000 to avoid conflicts with "standard" BSD and Linux
# users. These can also be tweaked to avoid pre-existing accounts on the
# fileserver machine.
#
MIN_UNIX_UID=10000
MIN_UNIX_GID=6000
#
# Addresses to which email will be sent - These are expected to go to mailing
# lists. You can either host the lists on your ops node, send them off to
# some external server. If you chose to run them from the ops node, the
# ops-install script sets up empty lists for you.
#
# Main address for the 'operations staff' - Copies of error messages, etc. will
# get sent to this address, and in some cases users are directed to this
# address if they have questions and/or problems.
TBOPSEMAIL=testbed-ops@example.emulab.net
# Notification of new projects requests get sent to this address for approval.
# Should have a few admin-types on it.
TBAPPROVALEMAIL=testbed-approval@example.emulab.net
# Logs, such as experiment creation/deletion go to this address. Probably no
# more than one person needs to be on this one.
TBLOGSEMAIL=testbed-logs@example.emulab.net
# Various auditing message about account maintenance go here. Again, probably
# only needs one member.
TBAUDITEMAIL=testbed-audit@example.emulab.net
# Some web reports get sent to this one.
TBWWWEMAIL=testbed-www@example.emulab.net
# Our node state management daemon sends mail to this address. Someone should
# be on this list, and reporting persistent error messages to Utah would be a
# good idea.
TBSTATEDEMAIL=testbed-stated@example.emulab.net
# We have a test suite to test the front end. This email is for the results
# of the testsuite, but is not used yet.
TBTESTSUITEEMAIL=testbed-testsuite@example.emulab.net
# We dynamically create two email addresses for notifications to users - one
# for all testbed users, and one for all users whose projects have active
# experiments. These addresses are included in the above lists, with the
# intent that they can be used to archive all mail sent to them.
TBUSERSARCHIVE=testbed-users-archive@example.emulab.net
TBACTIVEARCHIVE=testbed-active-users-archive@example.emulab.net
#
# Real paths (no symlinks) to the directories that get exported from ops
#
FSDIR_GROUPS=/groups
FSDIR_PROJ=/q/proj
FSDIR_USERS=/users
FSDIR_SHARE=/share
#
# Filesystems on which quotas should be enforced.
# Note that if multiple of the FSDIR_* vars above are on the same filesystem
# (e.g., /q/proj and /q/users) then you should only specify the base of the
# common filesystem on which they all reside here (e.g., /q).
# Set to the empty string to turn off quota checking.
#
FS_WITH_QUOTAS="/q /groups /users"
#
# SSL Certificate stuff. Used to customize config files in ssl directory.
# Note that OrganizationalUnit is set in the cnf file.
# CommonName is typically set to BOSSNODE and emailAddress to TBOPSEMAIL
#
SSLCERT_COUNTRY="US"
SSLCERT_STATE="Utah"
SSLCERT_LOCALITY="Salt Lake City"
SSLCERT_ORGNAME="Utah Network Testbed"
#
# Control network configuration stuff.
# Used primarily to generate initial named and dhcpd config files.
# See doc/setup-network.txt for definitions of the private, public and
# control segments.
#
#
# Boss and users node IP addresses on the control network.
# For boss this is an address on the private segment of the control net.
# For users this is an address on the public segment of the control net.
#
BOSSNODE_IP=192.168.2.70
USERNODE_IP=192.168.3.74
FSNODE_IP=$USERNODE_IP
#
# If your boss/ops nodes are multihomed (and typically, one of the
# networks is a public routable network, and the other is an internal
# unroutable network), then define the the external addresses here (and
# the internal addresses above).
#
EXTERNAL_BOSSNODE_IP=155.98.32.70
EXTERNAL_USERNODE_IP=155.98.33.74
EXTERNAL_FSNODE_IP=$EXTERNAL_USERNODE_IP
#
# Network definitions - see doc/setup-network.txt for a description of how
# we recommend laying out your network
#
#
# The overall control network range - this subnet should cover the
# CONTROL, PRIVATE, and PUBLIC networks below.
#
TESTBED_NETWORK=192.168.0.0
TESTBED_NETMASK=255.255.252.0
#
# As above, if you have internal and external networks, define the
# external network here, and the internal network above.
#
EXTERNAL_TESTBED_NETWORK=155.98.32.0
EXTERNAL_TESTBED_NETMASK=255.255.240.0
#
# The node control network segment.
#
CONTROL_ROUTER_IP=192.168.0.1
CONTROL_NETWORK=192.168.0.0
CONTROL_NETMASK=255.255.254.0
#
# The private network segment.
#
PRIVATE_NETWORK=192.168.2.0
PRIVATE_ROUTER=192.168.2.1
PRIVATE_NETMASK=255.255.255.0
#
# The public network segment.
#
PUBLIC_NETWORK=192.168.3.0
PUBLIC_ROUTER=192.168.3.1
PUBLIC_NETMASK=255.255.255.0
#
# A range of addresses within the node control network segment
# to use for new nodes being added to the testbed.
# You need at least one.
#
DHCPD_DYNRANGE="192.168.1.240 192.168.1.250"
#
# If you have forwarders for your named, specify them here for named.conf
# generation in the named directory.
#
NAMED_FORWARDERS="1.1.1.1 1.1.2.1"
#
# Windows support. Turn this on if you think you might want to use windows
# XP images on your experimental nodes. Note though, that Utah cannot
# provide those images to you (because of obvious licensing issues), so it
# will be up to you to generate an XP image yourself and install the
# Emulab client side that enables XP to work inside your testbed. Turning
# Windows support will install and enable Samba on your ops node, so there
# are firewall issues to be aware of (you want to block the appropriate ports
# so that your ops samba server can be accessed from *only* your control
# subnet!).
#
WINSUPPORT=0
#
# Virtual node network configuration (if you don't want virtual nodes,
# just leave this as is)
#
# Needs at least a /16 network. For a /16 the layout of an IP is:
# X.Y.<pnode>.<vnode>
# where <pnode> is the physical host node and <vnode> is the virtual
# node on that host. Both are between 1 and 254. If you have more than
# 254 physical nodes then the assignment code will increment Y, meaning
# that you had better have larger than a /16 network. If you are using
# the default 172.16/12, then you can have up to 16 * 254 physical hosts.
# If you want more than 254 vnodes per pnode, you are screwed.
#
VIRTNODE_NETWORK=172.16.0.0
VIRTNODE_NETMASK=255.240.0.0
# XXX compat
JAILIPBASE=$VIRTNODE_NETWORK
JAILIPMASK=$VIRTNODE_NETMASK
#
# You shouldn't have to change anything below this point
#
TBADMINGROUP=tbadmin
TBDBNAME=tbdb
IPBASE=10
DELAYCAPACITY=2
SFSSUPPORT=0
DISABLE_NSE=1
FRISEBEEMCASTADDR="234.5.6"
FRISEBEEMCASTPORT=3564
# Sometimes the main page is down in a directory on WWWHOST
# No trailing '/'!
#WWW=www.example.emulab.net/emulab-www
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment