Commit 5c23f485 authored by Leigh Stoller's avatar Leigh Stoller

Contact the GPO before setting up mesoscale.

parent 741adf10
......@@ -375,12 +375,6 @@ Setting up an InstaGeni Rack. First, we need the following info:
* Telnet to procurve2 (/usr/testbed/etc/switch.pswd):
5400> config
5400(config)# openflow
5400(openFlow)# vlan 1750
5400(openFlow vlan-1750)# enable
5400(openFlow vlan-1750)# controller "tcp:10.3.1.7:6633" fail-secure on
5400(openFlow vlan-1750)# exit
5400(openFlow)# exit
5400(config)> ip ssh
5400(config)> aaa authentication ssh login public-key none
5400(config)> aaa authentication ssh enable public-key none
......@@ -393,23 +387,6 @@ Setting up an InstaGeni Rack. First, we need the following info:
boss> wap addvpubaddr 192.1.242.150 192.1.242.179
boss> wap addvpubaddr 192.1.242.190 192.1.242.250
* Most sites will have the openflow vlan plumbed through to port 24 on
the data switch. If this is indeed true, then we can go ahead and set
that up now, so Nick can get started on the FOAM stuff.
boss> wap addspecialdevice -t interconnect -s 100 interconnect-geni-core
boss> wap addspecialiface -b 1Gb -s procurve2,1,24 interconnect-geni-core eth0
If the rack is wired properly 1,24 is correct. If the module is in
another slot, then this might be different.
Now create and share the openflow vlan:
boss> wap snmpit_test --vlan_tag=1750 -m mesoscale-openflow \
emulab-ops openflow-vlans interconnect-geni-core:eth0
boss> wap sharevlan -f -o emulab-ops,openflow-vlans \
mesoscale-openflow mesoscale-openflow
* Run update_sitevars and addservers to get boss/ops into the DB
and to turn on arp lockdown.
......@@ -442,6 +419,34 @@ Setting up an InstaGeni Rack. First, we need the following info:
boss> wap /usr/testbed/sbin/protogeni/register_resources
* At this point, contact the GPO infrastructure people to find out
what port and what vlan number to use for the mesoscale vlan. The
instructions below use port 24 and vlan 1750, but that MIGHT NOT BE
THE CASE.
Once you you know, telnet to the 5400:
5400> config
5400(config)# openflow
5400(openFlow)# vlan 1750
5400(openFlow vlan-1750)# enable
5400(openFlow vlan-1750)# controller "tcp:10.3.1.7:6633" fail-secure on
5400(openFlow vlan-1750)# exit
5400(openFlow)# exit
5400(config)> write memory
Then on boss:
boss> wap addspecialdevice -t interconnect -s 100 interconnect-geni-core
boss> wap addspecialiface -b 1Gb -s procurve2,1,24 interconnect-geni-core eth0
Now create and share the openflow vlan:
boss> wap snmpit_test --vlan_tag=1750 -m mesoscale-openflow \
emulab-ops openflow-vlans interconnect-geni-core:eth0
boss> wap sharevlan -f -o emulab-ops,openflow-vlans \
mesoscale-openflow mesoscale-openflow
* Send email to local admin with pointer to instructions on getting their
admin account on boss: http://www.protogeni.net/wiki/RackAdminAccounts
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment