control_switch_config 2.03 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Fri Dec 29 2000, 15:03:54 
!
#version 5.4(2)
!
set password $2$CBqb$bI4.FGawQpKvYt4H2Vjlu1
set enablepass $2$6IJa$lG/BsSWPWfcMKzu9Tx7pG1
set banner motd ^C

Utah Network Testbed
Cat6509 #2

Authorized Access Only.  Individuals without authorization may be
subject to monitoring or logging, and all logs may be turned
over to law enforcement agencies.

Be nice to our switch, we like it a lot.
Thank you!

^C
!
#!
#vtp
set vtp domain Testbed
set vlan 1 name default type ethernet mtu 1500 said 100001 state active 
set vlan 666 name power type ethernet mtu 1500 said 100666 state active 
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active 
set vlan 1004 name fddinet-default type fpeinet mtu 1500 said 101004 state active stp ieee 
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm 
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off 
!
#ip
set interface sc0 1 155.99.214.176/255.255.255.0 155.99.214.255

set ip route 0.0.0.0/0.0.0.0         155.99.214.61  
!
#dns
set ip dns server 155.99.214.70 primary
set ip dns server 155.99.214.74
set ip dns enable
set ip dns domain cs.utah.edu
!
#spantree
#vlan 1
set spantree disable    1
#vlan 666
set spantree disable    666
#vlan 1003
set spantree disable    1003
#vlan 1005
set spantree disable    1005
!
#set boot command
set boot config-register 0x102
set boot system flash bootflash:cat6000-sup.5-4-2.bin
!
#port channel
set port channel 1/1-2 1
!
# default port status is enable
!
!
#module 1 : 2-port 1000BaseX Supervisor
!
#module 2 : 16-port 1000BaseSX Ethernet
!
#module 3 : 48-port 10/100BaseTX Ethernet
set spantree portfast    3/1-20,3/29-48 enable
!
#module 4 : 48-port 10/100BaseTX Ethernet
set vlan 666  4/30-48
!
#module 5 : 2-port SM OC-12 ATM
!
#module 6 : 48-port 10/100BaseTX Ethernet
!
#module 7 empty
!
#module 8 empty
!
#module 9 empty
!
#module 15 : 1-port Multilayer Switch Feature Card
!
#module 16 empty
end