1. 10 May, 2005 3 commits
  2. 09 May, 2005 2 commits
  3. 31 Mar, 2005 1 commit
    • Timothy Stack's avatar
      Tweaks for garcia-pilot: · bcfa8a85
      Timothy Stack authored
      	* robots/primotion/garcia-pilot.cc: Turn off the fall sensors,
      	since they have a tendency to go off for no good reason.
      
      	* robots/primotion/pilotButtonCallback.cc: A short-click on the
      	user-button now shuts the garcia down.
      
      	* robots/primotion/pilotClient.cc,
      	robots/primotion/wheelManager.hh,
      	robots/primotion/wheelManager.cc: Set the wheel speed.
      bcfa8a85
  4. 18 Feb, 2005 2 commits
  5. 04 Feb, 2005 1 commit
    • Timothy Stack's avatar
      · 6f545cf0
      Timothy Stack authored
      Some more robot integration.
      
      	* event/lib/event.h, event/lib/event.c: Add some
      	event_notification creation functions that get used in
      	event-sched.
      
      	* event/sched/event-sched.c, event/sched/rpc.h,
      	event/sched/rpc.cc: Sync the start of event time with the
      	robots reaching their initial positions.  This is done by
      	creating a master event-sequence that takes care of sending
      	the SETDEST events and then starting the Simulator timeline.
      
      	* mote/tbuisp.in: Use node_reboot instead of ssh'ing in.
      
      	* robots/GNUmakefile.in: Don't build tbsetdest if ulsshxmlrpcpp is
      	not available.
      
      	* robots/emc/loclistener.in: Clear the destination values for a
      	node when it reaches its destination.
      
      	* robots/primotion/garcia-pilot.cc,
      	robots/primotion/pilotClient.cc: Some cleanup and debugging.
      
      	* robots/primotion/wheelManager.cc: Check the rear sensors for
      	obstructions and then decide which way to pivot.
      
      	* robots/rmcd/pilotConnection.h, robots/rmcd/pilotConnection.c,
      	robots/rmcd/rclip.h: Even more tweaking.
      
      	* robots/tbsetdest/tbsetdest.cc: Don't generate points that are
      	outside the camera bounds or inside an obstacle.
      
      	* robots/vmcd/visionTrack.c, robots/vmcd/vmcd.h,
      	robots/vmcd/vmcd.c:  Add more debugging output.
      
      	* tbsetup/os_setup.in: Removed the robot hack used when deciding
      	which nodes to reconfig/reboot.  Added a robot hack to avoid
      	rebooting a robot whose mote is being os_load'd, since it would
      	interrupt tbuisp which does the reboot anyways.  Also fixed a
      	small typo.
      
      	* tbsetup/ns2ir/node.tcl, tbsetup/ns2ir/sim.tcl.in: Oops, forgot
      	to convert degrees to radians.
      
      	* tbsetup/ns2ir/topography.tcl: When checking for node destination
      	points in obstacles, include the implicit exclusion zone.
      
      	* tmcd/common/bootsubnodes: Add empty "mote" case.
      
      	* tmcd/linux-sg/GNUmakefile.in: Make some of the /etc subdirs when
      	doing the install.
      
      	* tmcd/linux-sg/rc.stargate: Start garcia-pilot.
      
      	* vis/floormap.in: Add options for showing the camera bounds,
      	obstacle exclusion zones, and displaying vnames instead of pnames.
      
      	* www/ledpipe.php3: Finally figured out how to use a socket
      	instead of popening a perl script.
      
      	* www/robotmap.php3: Add checkboxes for displaying/not displaying
      	the camera bounds and obstacle exclusion zones.  Add a legend
      	showing what actual vs. destination points are.  Pass pid/eid
      	through to vis/floormap if it is given.
      
      	* www/showexp.php3: Add a "Robot Map" link to experiments that
      	have allocated garcias.
      
      	* www/floormap/map_legend_node.gif,
      	www/floormap/map_legend_node_dst.gif: Icons used by the robot map
      	legend.
      
      	* www/floormap/robots-4.jpg: Added an obstacle around the entryway
      	so people are slightly less likely to trip over the robots.  Added
      	a coordinate system legend to the top left corner.
      
      	* www/tutorial/mobilewireless.php3: Add links to David's movie of
      	the robot making its way around the pillar.
      
      	* www/tutorial/robot_anim.gif: A nifty gifanim clip of the robot
      	movie.
      
      	* xmlrpc/emulabserver.py.in: Pull the camera data from the DB,
      	instead of returning hardcoded stuff.
      6f545cf0
  6. 01 Feb, 2005 1 commit
  7. 26 Jan, 2005 1 commit
  8. 24 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · 3c1a5bad
      Timothy Stack authored
      Robot related stuff: power via e-mail, client-install fixups, checking
      coords against camera boundaries.
      
      	* configure, configure.in: Add tbsetup/power_mail.pm to the list
      	of template files.
      
      	* doc/cross-compiling.txt: More stargate notes.
      
      	* event/sched/rpc.cc: Updates for the addition of the cameras
      	table.
      
      	* robots/GNUmakefile.in, robots/emc/GNUmakefile.in,
      	robots/mtp/GNUmakefile.in, robots/rmcd/GNUmakefile.in,
      	robots/tbsetdest/GNUmakefile.in, robots/vmcd/GNUmakefile.in:
      	client-install fixups.
      
      	* tbsetup/GNUmakefile.in: Add power_mail.pm.
      
      	* tbsetup/os_setup.in: Don't skip reboot of robots anymore.
      
      	* tbsetup/power.in: Add special case for a power_id of "mail",
      	which calls into the power_mail.pm backend.
      
      	* tbsetup/power_mail.pm.in: E-mail backend for power, it sends an
      	e-mail to tbops and waits for the outlets.last_power value to be
      	updated from the power.php3 web page.
      
      	* tbsetup/ns2ir/parse-ns.in: Add the contents of the cameras table
      	to the TBCOMPAT namespace.
      
      	* tbsetup/ns2ir/sim.tcl.in: More checking of "setdest" inputs.
      
      	* tbsetup/ns2ir/topography.tcl: Update the checkdest method to
      	check destination points against the camera list.
      
      	* www/powertime.php3: Webpage used to update the last power time
      	for nodes.
      
      	* www/shownode.php3: Add "Update Power Time" menu button.
      3c1a5bad
  9. 22 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · 74f61a9f
      Timothy Stack authored
      More robot stuff, start in on path planning and cleanup rmcd a bit.
      
      	* robots/emc/emcd.c: Update for obstacle-related changes in mtp.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.h, robots/mtp/mtp.c,
      	robots/mtp/mtp_send.c: Add messages for requesting/reporting robot
      	sensor contacts, plus some cosmetic changes to the obstacle_config
      	structure.
      
      	* robots/primotion/garcia-pilot.cc,
      	robots/primotion/pilotClient.hh, robots/primotion/pilotClient.cc:
      	Add support for sending "contact" reports, which contain points
      	where the sensors have detected an object.
      
      	* robots/rmcd/GNUmakefile.in, robots/rmcd/obstacles.h,
      	robots/rmcd/obstacles.c, robots/rmcd/pilotConnection.h,
      	robots/rmcd/pilotConnection.c, robots/rmcd/rclip.h,
      	robots/rmcd/rclip.c, robots/rmcd/rmcd.c: Cleanup and add in some
      	obstacle avoidance.
      74f61a9f
  10. 17 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · 1e18722e
      Timothy Stack authored
      More robot tweaks:
      
      	* event/sched/event-sched.c: Start rmcd, then vmcd.
      
      	* event/sched/rpc.cc: Add camera dimensions to the config file.
      
      	* robots/emc/emcd.c: Add camera dimensions to the config file and
      	destroy vmc's position_list when it disconnects.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.c: Add dimensions to the camera
      	config and add a command_id field to the update_position packet.
      
      	* robots/primotion/garcia-pilot.cc: Move the decl of the acpGarcia
      	object below daemon(3) since it doesn't seem to like it when the
      	parent process dies and fix the log file creation.
      
      	* robots/primotion/pilotClient.cc: Pass the command_id back in any
      	update_position packets.
      
      	* robots/rmcd/rmcd.c: Use the command-id to distinguish between
      	STOPs for the sake of a GOTO and a wiggle.
      
      	* robots/vmcd/visionTrack.h, robots/vmcd/visionTrack.c: Only
      	coalesce packets from different cameras (duh) and mess with the
      	tolerances a little more.
      
      	* xmlrpc/emulabserver.py.in: Add some rough camera dimensions.
      1e18722e
  11. 14 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · bfb38f51
      Timothy Stack authored
      Pass camera config to vmcd in the config_vmc packet and add support
      for using unix-domain sockets when talking to emcd instead of
      unsecured tcp sockets.
      
      	* robots/emc/emcd.c: Add support for camera configs in the config
      	file and add support for listening on a unix-domain socket.
      
      	* robots/emc/test_emcd.config, robots/emc/test_emcd.sh.in: Update
      	for changes to emcd.
      
      	* robots/mtp/mtp.h, robots/mtp/mtp.c, robots/mtp/mtp.x,
      	robots/mtp/mtp_send.c: Add camera config to the config_vmc packet
      	and add support for unix-domain sockets.
      
      	* robots/primotion/GNUmakefile.in: Add empty install target.
      
      	* robots/rmcd/rmcd.c, robots/rmcd/test_emcd.config: Add support
      	for unix-domain sockets.
      
      	* robots/vmcd/vmcd.c: Add support for unix-domain sockets and read
      	the camera config from the config_vmc packet.
      
      	* robots/vmcd/test_vmc*.sh: Fix tests changed by my last checkin.
      
      	* robots/vmcd/test_emcd*.config: Update for changes to the emcd
      	config file format.
      bfb38f51
  12. 12 Jan, 2005 1 commit
    • Timothy Stack's avatar
      · f45f9c16
      Timothy Stack authored
      Fix some robot related stuff that I broke with the last checkin and add in
      some other tweaks.
      
      	* robots/primotion/garcia-pilot.cc,
      	robots/primotion/pilotClient.hh, robots/primotion/pilotClient.cc:
      	Broadcast any goto/stop commands to clients observing the robot.
      
      	* robots/rmcd/rmcd.c: Change the behavior to reorient the robot as
      	the last step in a goto, so we avoid doing unnecessary pivots.
      	Need to send an init packet to the robot so it knows who is
      	talking to it.
      
      	* robots/vmcd/vmc-client.c: Oops, supposed to use M_PI_2, not
      	M_PI, when translating from camera coords to world.
      
      	* www/telemetry.php3: Make the size of the applet a little bigger.
      
      	* www/garcia-telemetry/GarciaTelemetry.java,
      	www/garcia-telemetry/UpdateThread.java,
      	www/garcia-telemetry/main.xml: Display a log of goto/stop commands
      	sent to the robot.
      f45f9c16
  13. 10 Jan, 2005 2 commits
    • Timothy Stack's avatar
      Updated makefile that builds garcia-pilot · 48808852
      Timothy Stack authored
      48808852
    • Timothy Stack's avatar
      · 89bf0a7f
      Timothy Stack authored
      A bunch of engineering on the robot code.  I'm sure I've broken something,
      but the majority of it is done and I wanted to get a checkpoint in.
      
      	* GNUmakerules: Add rpcgen rules.
      
      	* Makeconf.in: Add PATH and host_cpu variables so
      	cross-compilation works properly.  Add JAVAC and JAR for java
      	compilation.  Add BRAINSTEM_DIR that refers to a brainstem build
      	directory to be used for the robot build.
      
      	* configure, configure.in: Prepend the arm cross-compile dir to
      	PATH.  Detect java for building applets.  Add --with-brainstem to
      	specify the brainstem build dir.  Add --enable-mezzanine to turn
      	on the mezzanine build.
      
      	* robots/GNUmakefile.in: Add client target that builds the
      	subdirs.
      
      	* robots/emc/GNUmakefile.in, robots/emc/emcd.h, robots/emc/emcd.c,
      	test_emcd.sh.in, robots/rmcd/GNUmakefile.in, robots/rmcd/rmcd.c,
      	robots/rmcd/test_rmcd.sh.in, robots/vmcd/test_vmc-client.sh.in,
      	robots/vmcd/test_vmcd.sh.in, robots/vmcd/test_vmcd2.sh,
      	robots/vmcd/test_vmcd3.sh, robots/vmcd/test_vmcd4.sh,
      	robots/vmcd/vmc-client.c, robots/vmcd/vmcd.c: Updates for the mtp
      	switch to using rpcgen.
      
      	* robots/emc/test_emcd.config: Restore missing config line.
      
      	* robots/mtp/GNUmakefile.in, robots/mtp/global_bound.java,
      	robots/mtp/mtp.h, robots/mtp/mtp.c, robots/mtp/mtp.java,
      	robots/mtp/mtp.x, robots/mtp/mtp_command_goto.java,
      	robots/mtp/mtp_command_stop.java, robots/mtp/mtp_config_rmc.java,
      	robots/mtp/mtp_config_vmc.java, robots/mtp/mtp_control.java,
      	robots/mtp/mtp_dump.c, robots/mtp/mtp_garcia_telemetry.java,
      	robots/mtp/mtp_opcode_t.java, robots/mtp/mtp_packet.java,
      	robots/mtp/mtp_payload.java, robots/mtp/mtp_recv.c,
      	robots/mtp/mtp_request_id.java,
      	robots/mtp/mtp_request_position.java,
      	robots/mtp/mtp_robot_type_t.java, robots/mtp/mtp_role_t.java,
      	robots/mtp/mtp_send.c, robots/mtp/mtp_status_t.java,
      	robots/mtp/mtp_telemetry.java, robots/mtp/mtp_update_id.java,
      	robots/mtp/mtp_update_position.java, robots/mtp/robot_config.java,
      	robots/mtp/robot_position.java, robots/mtp/test_mtp.sh: Replace
      	hand-generated stubs with xdr stubs for C and java.  Java stubs
      	were generated by "remotetea's" jrpcgen.
      
      	* robots/primotion/GNUmakefile.in,
      	robots/primotion/buttonManager.hh,
      	robots/primotion/buttonManager.cc, robots/primotion/dashboard.hh,
      	robots/primotion/dashboard.cc, robots/primotion/flash-user-led.cc,
      	robots/primotion/garcia-pilot.cc, robots/primotion/garciaUtil.hh,
      	robots/primotion/garciaUtil.cc, robots/primotion/ledManager.hh,
      	robots/primotion/ledManager.cc,
      	robots/primotion/pilotButtonCallback.hh,
      	robots/primotion/pilotButtonCallback.cc,
      	robots/primotion/pilotClient.hh, robots/primotion/pilotClient.cc,
      	robots/primotion/watch-user-button.cc,
      	robots/primotion/wheelManager.hh,
      	robots/primotion/wheelManager.cc: Replace gorobot with
      	garcia-pilot, a beefed up daemon for controlling the robots.
      	Improvements include: making use of the user LED and button to
      	give some feedback and let the wrangler run a test sequence,
      	reboot, and shutdown the robot; Logging of the battery level, how
      	often the robot has moved and for how long, and the distance
      	traveled; telemetry is sent back to emulab clients; movements are
      	now just pivot-move instead of pivot-move-pivot, since the second
      	pivot ends up being extra work most of the time; the robot will
      	move backwards to cut down on the amount of rotation; and just
      	generic cleanups to the code.
      
      	* robots/primotion/garcia.config: The configuration file currently
      	used on the garcias.
      
      	* www/GNUmakefile.in: Add garcia-telemetry subdir to the build.
      
      	* www/dbdefs.php3.in: Add TBNodeClass and TBNodeStatus functions.
      
      	* www/garcia-telemetry/Base64.java,
      	www/garcia-telemetry/GNUmakefile.in,
      	www/garcia-telemetry/GarciaTelemetry.java,
      	www/garcia-telemetry/UpdateThread.java,
      	www/garcia-telemetry/main.xml: A telemetry applet for the garcia,
      	it displays readouts for the various sensors and other bits of data
      	gathered by the garcia-pilot daemon.  Hopefully, it will make a
      	handy debugging tool.
      
      	* www/garcia-telemetry.jar, www/mtp.jar, www/oncrpc.jar,
      	www/thinlet.jar: Java jars used by the robot telemetry applet.
      
      	* www/servicepipe.php3: A slightly enhanced version of
      	ledpipe.php3 that can be used for other services, like robot
      	telemetry.
      
      	* www/shownode.php3: Add "Show Telemetry" menu item to robot
      	nodes.
      
      	* www/telemetry.php3: Telemetry page for the garcia-telemetry
      	applet.
      89bf0a7f
  14. 16 Dec, 2004 1 commit
  15. 15 Dec, 2004 8 commits
  16. 14 Dec, 2004 8 commits
    • Daniel Flickinger's avatar
      moved the zero length move/pivot error checking and callback incrementing into... · 36c84144
      Daniel Flickinger authored
      moved the zero length move/pivot error checking and callback incrementing into the primitive functions themselves, instead of the dgoto method.
      
      gorobot has been messing up anytime a goto command sequence results in a zero length pivot. (Which means the robot will fuckup and act stupid any time you try to get it to move in a straight line!)
      
      Things would be much easier if the Garcia could simply execute zero length commands without barfing.
      36c84144
    • Daniel Flickinger's avatar
      · 4cd61460
      Daniel Flickinger authored
      did something to the makefile
      4cd61460
    • Timothy Stack's avatar
      Implement resetPosition · fb9fe771
      Timothy Stack authored
      fb9fe771
    • Timothy Stack's avatar
      8d4ccc8e
    • Daniel Flickinger's avatar
      · 9027ca0a
      Daniel Flickinger authored
      Updated the pbPivot method to handle dumb angles, plus convert a larger (greater than 180 degrees) angle to a smaller angle in the opposite direction. Robots now turn to the desired heading with the shortest angle.
      9027ca0a
    • Daniel Flickinger's avatar
      · 6346eb63
      Daniel Flickinger authored
      Fixed compilation issue (changed $(INCLUDES) to $(CXXFLAGS)
      6346eb63
    • Timothy Stack's avatar
      · 5a1f373a
      Timothy Stack authored
      Add more debugging output to the robot daemons and do some more cleanup.
      5a1f373a
    • Timothy Stack's avatar
      · 988a850d
      Timothy Stack authored
      Even more robot-related cleanup:
      
      	* robots/primotion/Makefile: Add an install target that copies the
      	executables to the robots.  The default set of robots is
      	"garcia1-6", if you want a subset do: 'make install
      	ROBOTS="garcia2"'
      
      	* robots/primotion/gorobot.cc: Refactoring, add some more
      	debugging output, and print the battery level at startup and every
      	five minutes.
      988a850d
  17. 13 Dec, 2004 2 commits
    • Timothy Stack's avatar
      · dde7799c
      Timothy Stack authored
      More robot-related tweaks and bug fixes:
      
      	* robots/emc/emcd.c: Handle "-h" option properly.
      
      	* robots/emc/loclistener.in: Pickup the pixels_per_meter value
      	from the database and use that to convert event coordinates in
      	meters to pixels for the database.
      
      	* robots/primotion/gorobot.cc: Comment.
      
      	* robots/primotion/dgrobot/gcallbacks.h,
      	robots/primotion/dgrobot/gcallbacks.cc,
      	robots/primotion/dgrobot/grobot.h,
      	robots/primotion/dgrobot/grobot.c,
      	robots/primotion/dgrobot/grobot_sim.cc: Small bug fixes to make
      	sure the position estimate is updated when moving in a straight
      	line.
      
      	* robots/rmcd/rmcd.c: cleanup
      
      	* robots/vmcd/GNUmakefile.in, robots/vmcd/test_emcd3.config,
      	robots/vmcd/test_vmcd3.pos, robots/vmcd/test_vmcd3.sh,
      	robots/vmcd/test_vmcd4.pos, robots/vmcd/test_vmcd4.sh: Some more
      	test cases, still pretty simple though.
      dde7799c
    • Timothy Stack's avatar
      · fde7ae29
      Timothy Stack authored
      Rmcd and garcia stuff:
      
      	* configure, configure.in: Add robot related template files.
      
      	* robots/GNUmakefile.in: Add primotion directory.
      
      	* robots/emc/emcd.c: Debugging printfs, check the status for
      	update-position messages from rmc, and add a basic handler for
      	emulab clients.
      
      	* robots/emc/test_emcd.sh.in: Update for changes in mtp.
      
      	* robots/mtp/mtp.h, robots/mtp/mtp.c: Changes for the garcia.
      
      	* robots/mtp/mtp_send.c: Fixes so that it will compile under
      	linux.
      
      	* robots/primotion/GNUmakefile.in: Makefile for building a fake
      	gorobot in the testbed tree.
      
      	* robots/primotion/Makefile: tweaks
      
      	* robots/primotion/gorobot.cc: First draft with sort-of working
      	networking code.
      
      	* robots/primotion/test_gorobot.sh.in: Test case for the fake
      	gorobot.
      
      	* robots/primotion/dgrobot/GNUmakefile.in: Makefile for building a
      	fake grobot class in the testbed tree.
      
      	* robots/primotion/dgrobot/grobot.h: Add #if !defined(GROBOT_SIM)
      	conditionals.
      
      	* robots/primotion/dgrobot/grobot_sim.cc: Empty impl of grobot
      	class used for testing.
      
      	* robots/rmcd/GNUmakefile.in: Targets for building rmcd and
      	running its test case.
      
      	* robots/rmcd/rmcd.c: First draft with sort-of working networking
      	code.
      
      	* robots/rmcd/test_emcd.config: emcd configuration for the rmcd
      	test case.
      
      	* robots/rmcd/test_rmcd.sh.in: Test case for rmcd.
      fde7ae29
  18. 09 Dec, 2004 2 commits
    • Daniel Flickinger's avatar
      New application: gorobotc · ffa60e93
      Daniel Flickinger authored
       (Console interactive robot driving program)
      
      Major fixes to grobot. Added facilities to track goto moves, and avoid multiple gotos from executing at once. Also added functions for estimating final positions after executing a goto command.
      ffa60e93
    • Daniel Flickinger's avatar
      New application: gorobotc · 86624061
      Daniel Flickinger authored
       (Console interactive robot driving program)
      86624061
  19. 07 Dec, 2004 1 commit