All new accounts created on Gitlab now require administrator approval. If you invite any collaborators, please let Flux staff know so they can approve the accounts.

  1. 24 Sep, 2012 1 commit
    • Eric Eide's avatar
      Replace license symbols with {{{ }}}-enclosed license blocks. · 6df609a9
      Eric Eide authored
      This commit is intended to makes the license status of Emulab and
      ProtoGENI source files more clear.  It replaces license symbols like
      "EMULAB-COPYRIGHT" and "GENIPUBLIC-COPYRIGHT" with {{{ }}}-delimited
      blocks that contain actual license statements.
      This change was driven by the fact that today, most people acquire and
      track Emulab and ProtoGENI sources via git.
      Before the Emulab source code was kept in git, the Flux Research Group
      at the University of Utah would roll distributions by making tar
      files.  As part of that process, the Flux Group would replace the
      license symbols in the source files with actual license statements.
      When the Flux Group moved to git, people outside of the group started
      to see the source files with the "unexpanded" symbols.  This meant
      that people acquired source files without actual license statements in
      them.  All the relevant files had Utah *copyright* statements in them,
      but without the expanded *license* statements, the licensing status of
      the source files was unclear.
      This commit is intended to clear up that confusion.
      Most Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the Affero GNU General Public License, version 3
      Most Utah-copyrighted files related to ProtoGENI are distributed under
      the terms of the GENI Public License, which is a BSD-like open-source
      Some Utah-copyrighted files in the Emulab source tree are distributed
      under the terms of the GNU Lesser General Public License, version 2.1
  2. 17 Feb, 2012 1 commit
    • Leigh B Stoller's avatar
      BIG reorganization of the install code. · 82e1d812
      Leigh B Stoller authored
      * Split up boss/ops/fs install into indvidual modules; generally, what
        was a toplevel phase in the original files is not a file. This
        allowed for better code/variable reuse. No longer monolithic, which
        makes it easy to test and rerun parts.
      * Incorporate "update" into the install process. Certain phase file
        can be used in update mode, as when the IP/subnet/domain changes.
      * Moved the MFS setup from rc.mkelab into the normal install process.
        Users no longer have to do this themselves. Good thing.
      * is a new library that has the merged set of the
        zillion variables that were at the top of boss/fs/ops install.
  3. 08 Feb, 2012 2 commits
  4. 11 Jan, 2012 1 commit
  5. 09 Jan, 2012 2 commits
  6. 06 Jan, 2012 3 commits
  7. 13 Dec, 2011 1 commit
  8. 07 Oct, 2011 1 commit
  9. 30 Sep, 2011 1 commit
    • Leigh B Stoller's avatar
      Start on the move from Apache 1.3 to 2.2 ... · 6cd688f9
      Leigh B Stoller authored
      * The httpd.conf file I started with came from Dave's linux-port branch,
        and subsequently whacked for FreeBSD installation. Sorry for not using
        git to bring the base version in.
      * Configure changes to determine what version of apache is installed, and
        modify behaviour in makefiles accordingly.
      * Along with Apache 2.2 comes the latest version of PHP5, and that requires
        a bogus timezone directive in php.ini to prevent endless warnings. So I
        moved the entire php,ini install from ops/boss-install to here.
      Note that I had to use the 8.2 ports tree to build this stuff, and it the
      usual headache cause options and directives have changed.
  10. 17 Aug, 2011 1 commit
  11. 10 Aug, 2011 1 commit
    • Leigh B Stoller's avatar
      Add support for making OPS a jail on boss. This works for elabinelab, · aefe785a
      Leigh B Stoller authored
      but has not been tested for actual Emulab. A typical elabinelab NS
      file would look like:
          source tb_compat.tcl
          set ns [new Simulator]
          tb-elab-in-elab 1
          tb-elab-in-elab-topology opsvm
          tb-set-elabinelab-attribute CONFIG_WINDOWS 0
          namespace eval TBCOMPAT {
              set elabinelab_maxpcs 1
              set elabinelab_hardware("boss") pc3000
          $ns run
  12. 17 May, 2011 1 commit
    • Mike Hibler's avatar
      Add machinery to automatically setup mrouted on the control network. · 3ba294d9
      Mike Hibler authored
      This is specifically intended for elabinelab right now where configurations
      with an "inner control network" need a multicast router for inner frisbee
      to work. There is (an undocumented) NEEDMROUTED defs variable that controls
      whether the machinery is triggered or not. It is not documented because, though
      in theory this would work for a real boss setup, it has not been tested and
      each install would probably need a custom mrouted.conf file.
      For an inner elab, this variable is automatically set in defs-elabinelab
      if there is an inner control network. The result is that the mrouted port
      will be installed, it will be enabled in rc.conf, and a stub mrouted.conf
      file is created (to force mrouted to ignore the real control network).
  13. 07 Mar, 2011 1 commit
  14. 10 Feb, 2011 1 commit
  15. 11 Jan, 2011 2 commits
    • Mike Hibler's avatar
      Found a patch that will make the SelfLoader work with perl 5.10.1. · f0ea7d23
      Mike Hibler authored
      Repeating myself since not everything got committed last time...
      In the lastest version of SelfLoader they fixed the taint problem.  It is
      literally one line of code (plus updating version string) so I just made
      a patch.  Also, fixup boss/ops-install to apply the patch and change the
       default to use the SelfLoader again.
    • Mike Hibler's avatar
      More work toward getting this working on subboss. · 8d80301e
      Mike Hibler authored
      More work on the hierarchical configuration for subboss. When doing host-based
      authentication, allow client to pass an explicit host (IP) to the mserver.
      If the mserver is configured to allow it, that IP is used for authenticating
      the request instead of the caller's IP. Add a default ("null") configuration
      so the mserver can operate out-of-the-box with no config file. The goal of
      these two changes is for an mserver instance with the default config and a
      proxy option to serve the needs of a subboss node (i.e., so no explicit
      configuration will be needed).
  16. 12 Nov, 2010 1 commit
    • Mike Hibler's avatar
      Create NULL topomap for system experiments. · 678356c2
      Mike Hibler authored
      Yes this is silly, but it pissed me off.  Nodes that came up in a system
      experiment like hwdown or reloading would wind up TBFAILED because rc.topomap
      would fail.  Now boss-install will create a null map when these are setup.
      An update script takes care of existing installs.
  17. 22 Sep, 2010 1 commit
    • Mike Hibler's avatar
      Support FreeBSD 7.3 server side. · 8487a057
      Mike Hibler authored
      Mostly this means a new package set emulab-*-3.1 and some corresponding
      tweaks to the install scripts and elabinelab scripts.
      PLEASE NOTE: a 7.3 install uses PHP5, Perl 5.10.1 and Python 2.6.
  18. 21 Sep, 2010 1 commit
  19. 18 Aug, 2010 1 commit
    • Mike Hibler's avatar
      Robustness fixes. · 7bf4bb0c
      Mike Hibler authored
      Don't die if named is running but the pid file is gone.
      Beware of more than one m2crypto .egg file installed.
      Install swig if necessary when unpacking .egg
  20. 10 Jun, 2010 1 commit
    • Mike Hibler's avatar
      Avoid dynamic use (unpacking) of Python M2Crypto .egg file. · a742ea9d
      Mike Hibler authored
      The FreeBSD port just installs the zipped .egg file for M2Crypto and there
      is no option to make or install an unzipped version.  Unfortunately, the
      zipped version gets unpacked, per-user when it is first used and the
      directory it is unpacked to is not always writable.  To avoid unsightly
      "permission denied" failures, we run a post-package-install phase to
      manually unpack the .egg in the python site-library directory.  This is
      wicked ugly and I really should be flogged for doing this...
  21. 04 Jun, 2010 3 commits
  22. 10 May, 2010 1 commit
  23. 02 Apr, 2010 1 commit
    • Mike Hibler's avatar
      No longer install the emulab p5-GD-2.07 port. · 9214ef9e
      Mike Hibler authored
      We introduced this port or an older version of GD long ago to get around an
      incompatibility with perl.  Our perl has since moved on and we no longer
      need this.  To be safe, we still install this on 4.x-based installs (though
      I am sure many, many other things would break if someone tried to install
      Emulab on FreeBSD 4.x now!)
  24. 30 Mar, 2010 1 commit
  25. 29 Mar, 2010 1 commit
  26. 09 Feb, 2010 5 commits
  27. 20 Jan, 2010 1 commit
  28. 06 Jan, 2010 1 commit
  29. 05 Jan, 2010 1 commit