1. 24 Jan, 2005 7 commits
    • Leigh B. Stoller's avatar
      Add stuff · 43553e59
      Leigh B. Stoller authored
      43553e59
    • Russ Fish's avatar
      Use Ops/FS as the Samba server. More tweaks. · a0c3aaf4
      Russ Fish authored
      a0c3aaf4
    • Timothy Stack's avatar
      · 3c1a5bad
      Timothy Stack authored
      Robot related stuff: power via e-mail, client-install fixups, checking
      coords against camera boundaries.
      
      	* configure, configure.in: Add tbsetup/power_mail.pm to the list
      	of template files.
      
      	* doc/cross-compiling.txt: More stargate notes.
      
      	* event/sched/rpc.cc: Updates for the addition of the cameras
      	table.
      
      	* robots/GNUmakefile.in, robots/emc/GNUmakefile.in,
      	robots/mtp/GNUmakefile.in, robots/rmcd/GNUmakefile.in,
      	robots/tbsetdest/GNUmakefile.in, robots/vmcd/GNUmakefile.in:
      	client-install fixups.
      
      	* tbsetup/GNUmakefile.in: Add power_mail.pm.
      
      	* tbsetup/os_setup.in: Don't skip reboot of robots anymore.
      
      	* tbsetup/power.in: Add special case for a power_id of "mail",
      	which calls into the power_mail.pm backend.
      
      	* tbsetup/power_mail.pm.in: E-mail backend for power, it sends an
      	e-mail to tbops and waits for the outlets.last_power value to be
      	updated from the power.php3 web page.
      
      	* tbsetup/ns2ir/parse-ns.in: Add the contents of the cameras table
      	to the TBCOMPAT namespace.
      
      	* tbsetup/ns2ir/sim.tcl.in: More checking of "setdest" inputs.
      
      	* tbsetup/ns2ir/topography.tcl: Update the checkdest method to
      	check destination points against the camera list.
      
      	* www/powertime.php3: Webpage used to update the last power time
      	for nodes.
      
      	* www/shownode.php3: Add "Update Power Time" menu button.
      3c1a5bad
    • Robert Ricci's avatar
    • Leigh B. Stoller's avatar
      Bottom line on this commit: Do not update the nodetypeXpid_permissions · 775ca147
      Leigh B. Stoller authored
      table by hand anymore! Update the group_policies table and then run
      the script to update the permissions table (sbin/update_permissions).
      
      Details:
      
      My original thought when I started this was that I would be able to
      replace the existing nodetypeXpid_permissions table with this new
      stuff. Well, it turns out that this was not a good thing to do, for a
      couple of reasons:
      
        * Engineering: We access the nodetypeXpid_permissions table from three
          different languages, and no way I wanted to rewrite this library in
          in python and php!
      
        * Performance: We access the nodetypeXpid_permissions from the web
          interface, on every single page load. In fact, we access it twice if
          if you count the FreePCs() count that we put at the top of the menu.
          Going through this library on each page load would be a serious drag.
      
      So, rather then actually get rid of the nodetypeXpid_permissions table, I
      decided to keep it as a "cache" of permissions stored in the group
      policies table. Each time you update the policy tables, we need to run
      the update_permissions script which will call into this library (see the
      TBUpdateNodeTypeXpidPermissions() routine) to reconstruct the permissions
      table. I have whacked the grantnodetype script to do exactly that.
      
      Note that we could proably do the same thing for users by creating an
      equivalent nodetypeXuid_permissions table, mapping users to types they
      are allowed to use. That would be a lot rows, but the amount of data in
      the table is small. That would give us very fine grained control of what
      we show people in the web interface. Not sure it is worth it though.
      
      I also added some instructions to previous commit in database-migrate.txt
      on populating the new group_policies table from the existing
      permissions table.
      775ca147
    • Timothy Stack's avatar
      e5cb651a
    • Timothy Stack's avatar
      Add more notes about the garcia's stargate and getting startup closer to · e5938c23
      Timothy Stack authored
      working completely.
      e5938c23
  2. 22 Jan, 2005 4 commits
    • Timothy Stack's avatar
      Add robot map and webcam image · 44624909
      Timothy Stack authored
      44624909
    • Timothy Stack's avatar
      da74d108
    • Timothy Stack's avatar
      · 74f61a9f
      Timothy Stack authored
      More robot stuff, start in on path planning and cleanup rmcd a bit.
      
      	* robots/emc/emcd.c: Update for obstacle-related changes in mtp.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.h, robots/mtp/mtp.c,
      	robots/mtp/mtp_send.c: Add messages for requesting/reporting robot
      	sensor contacts, plus some cosmetic changes to the obstacle_config
      	structure.
      
      	* robots/primotion/garcia-pilot.cc,
      	robots/primotion/pilotClient.hh, robots/primotion/pilotClient.cc:
      	Add support for sending "contact" reports, which contain points
      	where the sensors have detected an object.
      
      	* robots/rmcd/GNUmakefile.in, robots/rmcd/obstacles.h,
      	robots/rmcd/obstacles.c, robots/rmcd/pilotConnection.h,
      	robots/rmcd/pilotConnection.c, robots/rmcd/rclip.h,
      	robots/rmcd/rclip.c, robots/rmcd/rmcd.c: Cleanup and add in some
      	obstacle avoidance.
      74f61a9f
    • Timothy Stack's avatar
      Fix ordering of coordinates when generating obstacle lines in the · d3910751
      Timothy Stack authored
      emcd.config file
      d3910751
  3. 21 Jan, 2005 5 commits
  4. 20 Jan, 2005 9 commits
  5. 19 Jan, 2005 5 commits
  6. 18 Jan, 2005 7 commits
  7. 17 Jan, 2005 3 commits
    • Timothy Stack's avatar
      · 1e18722e
      Timothy Stack authored
      More robot tweaks:
      
      	* event/sched/event-sched.c: Start rmcd, then vmcd.
      
      	* event/sched/rpc.cc: Add camera dimensions to the config file.
      
      	* robots/emc/emcd.c: Add camera dimensions to the config file and
      	destroy vmc's position_list when it disconnects.
      
      	* robots/mtp/mtp.x, robots/mtp/mtp.c: Add dimensions to the camera
      	config and add a command_id field to the update_position packet.
      
      	* robots/primotion/garcia-pilot.cc: Move the decl of the acpGarcia
      	object below daemon(3) since it doesn't seem to like it when the
      	parent process dies and fix the log file creation.
      
      	* robots/primotion/pilotClient.cc: Pass the command_id back in any
      	update_position packets.
      
      	* robots/rmcd/rmcd.c: Use the command-id to distinguish between
      	STOPs for the sake of a GOTO and a wiggle.
      
      	* robots/vmcd/visionTrack.h, robots/vmcd/visionTrack.c: Only
      	coalesce packets from different cameras (duh) and mess with the
      	tolerances a little more.
      
      	* xmlrpc/emulabserver.py.in: Add some rough camera dimensions.
      1e18722e
    • Timothy Stack's avatar
      · 11cceda4
      Timothy Stack authored
      Some cleanup to the vision system and make wiggle work, although it is still
      a bit glitchy.  This checkin is enough to identify the robots in their
      pens and move them to their initial positions.
      
      	* robots/emc/emcd.h, robots/emc/emcd.c: When rmc connects, send
      	GOTOs with the initial positions given in the config file.  If rmc
      	requests a vision update and one isn't available, queue the
      	request and send a reply when an update does come in.
      
      	* robots/mtp/GNUmakefile.in, robots/mtp/listNode.h,
      	robots/mtp/listNode.c: Add amiga-style linked list node functions,
      	tim always needs these.
      
      	* robots/mtp/mtp.h, robots/mtp/mtp.c: Add mtp_theta function that
      	produces a sane theta value between -M_PI and M_PI.
      
      	* robots/mtp/mtp.x: Add MTP_WIGGLE_START type which causes the
      	robots to stop in their tracks waiting for a real wiggle type
      	(e.g. 180 deg turn).
      
      	* robots/rmcd/rmcd.c: Tweaks, add support for MTP_WIGGLE_START.
      
      	* robots/vmcd/GNUmakefile.in, robots/vmcd/robotObject.h,
      	robots/vmcd/robotObject.c, robots/vmcd/visionTrack.h,
      	robots/vmcd/visionTrack.c, robots/vmcd.c: Cleanup and make wiggle
      	work.
      
      	* robots/vmcd/vmc-client.c: If there are no objects detected in a
      	camera send an error packet instead of nothing, so vmcd can keep
      	in sync with the frames.
      11cceda4
    • Timothy Stack's avatar
      · bf489797
      Timothy Stack authored
      More robot integration and some event system updates.
      
      	* configure, configure.in: Detect rsync for loghole and add
      	utils/loghole to the list of template files.
      
      	* db/libdb.pm.in, db/xmlconvert.in: Add virt_node_startloc to the
      	list of virtual tables.
      
      	* event/lib/event.h, event/lib/event.c, event/lib/tbevent.py.tail:
      	Add event_stop_main function to break out of the event_main()
      	loop.  Add timeline to the address tuple.
      
      	* event/sched/GNUmakefile.in, event/sched/error-record.h,
      	event/sched/error-record.c, event/sched/event-sched.8,
      	event/sched/event-sched.h, event/sched/event-sched.c,
      	event/sched/group-agent.h, event/sched/group-agent.c,
      	event/sched/listNode.h, event/sched/listNode.c,
      	event/sched/local-agent.h, event/sched/local-agent.c,
      	event/sched/node-agent.h, event/sched/node-agent.cc,
      	event/sched/queue.c, event/sched/rpc.h, event/sched/rpc.cc,
      	event/sched/simulator-agent.h, event/sched/simulator-agent.c,
      	event/sched/timeline-agent.h, event/sched/timeline-agent.c:
      	Updated event scheduler, not completely finished, but well enough
      	along for the robots.
      
      	* lib/libtb/GNUmakefile.in, lib/libtb/popenf.h,
      	lib/libtb/popenf.c, lib/libtb/systemf.h, lib/libtb/systemf.c: Add
      	some handy versions of system/popen that take format arguments.
      
      	* lib/libtb/tbdefs.h, lib/libtb/tbdefs.c: Add some more event and
      	object types.
      
      	* tbsetup/assign_wrapper.in: Add the virt_node_startloc building
      	to desires string for a node.
      
      	* tbsetup/ptopgen.in: Add a node's location to the feature list.
      
      	* tbsetup/tbreport.in: Display the timeline/sequence an event is a
      	part of.
      
      	* tbsetup/ns2ir/GNUmakefile.in: Add timeline, sequence, and
      	topography files.
      
      	* tbsetup/ns2ir/node.tcl: Add initial position for nodes and allow
      	them to be attached to "topographys".
      
      	* tbsetup/ns2ir/parse-ns.in: Make a hwtype_class array with a
      	node_type's class.  Make an 'areas' array that holds the
      	buildings where nodes are located.  Make an 'obstacles' table
      	with any obstacles in the building.
      
      	* tbsetup/ns2ir/parse.tcl.in: Move named-args function from
      	tb_compat.tcl to here.  Add reltime-to-secs function that converts
      	time given in a format like "10h2m1s" to a seconds value, used in
      	"$ns at" so its easier to write time values.  Add "K", "Kb", and
      	"Kbps" as possible units for bandwidth (only the lowercase
      	versions were available before).
      
      	* tbsetup/ns2ir/program.tcl: Add "dir" and "timeout" attributes,
      	although they don't go anywhere at the moment.
      
      	* tbsetup/ns2ir/sequence.tcl, tbsetup/ns2ir/timeline.tcl,
      	tbsetup/ns2ir/topography.tcl: Initial versions.
      
      	* tbsetup/ns2ir/sim.tcl.in: Add support for timelines and
      	sequences.  Add 'node-config' method to change the default
      	configuration for nodes produced by the Simulator object.  Send an
      	initial MODIFY event to any trafgen objects so their configuration
      	gets through, even when there are no start/stop events.  Move
      	event parsing to the 'make_event' method.
      
      	* utils/loghole.1, utils/loghole.in: Loghole utility, used for
      	retrieving logs from experimental nodes and creating archives of
      	the logs.
      
      	* xmlrpc/emulabclient.py.in: Escape any strange characters in the
      	output field.
      
      	* xmlrpc/emulabserver.py.in: Add virt_node_startloc to the list of
      	virtual_tables.  Add emulab.vision_config and
      	emulab.obstacle_config methods for getting information pertaining
      	to the robots.  Change the OSID listing to include more fields.
      	Add a "physical" aspect to experiment.info to get information
      	about the physical nodes.  Add parent field to the events in the
      	array returned by eventlist.  Add sshdescription to get extra
      	information needed to log into a vnode.  Add node.statewait so you
      	can wait for nodes to come up.
      bf489797