Commit f514505b authored by Leigh B. Stoller's avatar Leigh B. Stoller
Browse files

Minor edits. Proxydhcp.conf no longer used. Add stuff about tiplines

parent 9e06ba1b
......@@ -83,6 +83,24 @@ C. What to do on boss:
update nodes set pxe_boot_path=''
where node_id='pcN';
N (priority) is the where it gets printed out. These need to be
ascending numbers, and in the right region. See the table.
4a. Add entries into the tiplines table. The "server" field is where
the actual capture process runs:
INSERT INTO tiplines VALUES ('pc1', '',0,0,'');
INSERT INTO tiplines VALUES ('pc111','',0,0,'');
You need to add the usual lines in /etc/remote on the machine
where the capture process runs. In addition, add a line on users
to that users can use tip to connect to a console on a remote tip
server. So, on users:
The device field is ignored, but something must be there.
5. Until you are ready to put it in service, reserve it to an expt,
either with nalloc or by adding an entry to the reserved table
directly. You'll probably also want to put its ports in a vlan to
......@@ -115,10 +133,6 @@ C. What to do on boss:
sudo /usr/local/etc/rc.d/ restart
(old /usr/site/bin/dhcp/restart)
- ProxyDHCP: on boss, edit /usr/testbed/etc/proxydhcp.conf
add a line like this:
155.101.132.N /tftpboot/pxeboot
sudo /usr/testbed/sbin/proxydhcp.restart
- tip: on ops, edit /etc/remote
add a line like this:
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment