Commit d98651c9 authored by Leigh B Stoller's avatar Leigh B Stoller

Change 2610 to 2620 ...

parent a16188eb
...@@ -126,30 +126,30 @@ Setting up an InstaGeni Rack. First, we need the following info: ...@@ -126,30 +126,30 @@ Setting up an InstaGeni Rack. First, we need the following info:
and try again. Might take another iteration or two. When you have the and try again. Might take another iteration or two. When you have the
prompt: prompt:
2610> config 2620> config
2610(config)> vlan 11 2620(config)> vlan 11
2610(vlan-11)> name control-alternate 2620(vlan-11)> name control-alternate
2610(vlan-11)> untagged 24 XXXX Make sure about port number! 2620(vlan-11)> untagged 24 XXXX Make sure about port number!
2610(vlan-11)> ip address 10.2.1.253/24 2620(vlan-11)> ip address 10.2.1.253/24
2610(vlan-11)> exit 2620(vlan-11)> exit
2610(config)> vlan 10 2620(config)> vlan 10
2610(vlan-10)> name control-hardware 2620(vlan-10)> name control-hardware
2610(vlan-10)> untagged 23 XXXX Make sure about port number! 2620(vlan-10)> untagged 23 XXXX Make sure about port number!
2610(vlan-10)> ip address 10.1.1.253/24 2620(vlan-10)> ip address 10.1.1.253/24
2610(vlan-10)> exit 2620(vlan-10)> exit
2610(config)> vlan 1 2620(config)> vlan 1
2610(vlan-1)> ip address 10.254.254.253/24 # IGMP querier requires this 2620(vlan-1)> ip address 10.254.254.253/24 # IGMP querier requires this
2610(vlan-1)> exit 2620(vlan-1)> exit
2610(config)> management-vlan 10 2620(config)> management-vlan 10
2610(config)> ip default-gateway 10.1.1.254 2620(config)> ip default-gateway 10.1.1.254
2610(config)> vlan 1 ip igmp 2620(config)> vlan 1 ip igmp
2610(config)> vlan 1 ip igmp querier 2620(config)> vlan 1 ip igmp querier
2610(config)> no web-management 2620(config)> no web-management
2610(config)> no snmp-server community public 2620(config)> no snmp-server community public
2610(config)> snmp-server community XXXXX manager unrestricted 2620(config)> snmp-server community XXXXX manager unrestricted
2610(config)> password all (type in same password for manager/operator) 2620(config)> password all (type in same password for manager/operator)
2610(config)> write memory 2620(config)> write memory
2610(config)> reload 2620(config)> reload
UTAH: THE PASSWORD and COMMUNITY string come from variables.txt file UTAH: THE PASSWORD and COMMUNITY string come from variables.txt file
in the rack subdir. Use the same for both switches. in the rack subdir. Use the same for both switches.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment