Commit bb15d967 authored by Leigh B Stoller's avatar Leigh B Stoller

Fixes.

parent 9dbf3ad1
......@@ -83,7 +83,8 @@ Utah Emulab is also the DNS server for the control node IPs. So in
Be sure to change the serial number at the top of the file.
ALSO: need to add new boss/ops ips to boss:/etc/namedb/named.conf
so that they can do recursive lookups.
so that they can do recursive lookups. Look for the 'rd-allowed'
section.
Now run named_setup to get named restarted on boss. Be sure to tail
/var/log/messages to make sure no problems in the restart.
......@@ -177,6 +178,8 @@ need the ssh pubkey file from the site admin. For example:
rootpswd="cleverpswd"
adminuser="acb"
*** Be sure to write down the root password in the pswd.txt file!
Copy this file and ssh pubkey file over to /tmp on Utah's control
node. Then log in and do this:
......
......@@ -70,6 +70,10 @@ Setting up an InstaGeni Rack. First, we need the following info:
text representation of the graphic console. To exit from the
text console, use ESC-(
* Disable IPMI; When logged into the ilo web interface, go to
Administration->Access Settings and uncheck the IPMI box. Be sure
to click on apply.
* Go to the Virtual Media tab, and then on the right hand side specify
the url of the boot ISO image. This will be something like:
......@@ -85,9 +89,9 @@ Setting up an InstaGeni Rack. First, we need the following info:
whatever number is to the left of the CD choice.
* The ISO will load and give you a boot prompt. This takes a while.
You will eventually get a shell prompt after a lot of noisy
output. This can take several minutes since it is demand loading the
"CD" from Utah's web server. Be patient.
Just hit return. You will eventually get a shell prompt after a lot
of noisy output. This can take several minutes since it is demand
loading the "CD" from Utah's web server. Be patient.
* Fire up the network:
......@@ -161,10 +165,6 @@ Setting up an InstaGeni Rack. First, we need the following info:
2620(config)> no snmp-server community public
2620(config)> snmp-server community XXXXX manager unrestricted
2620(config)> password all (type in same password for manager/operator)
2620(config)> ip ssh
2620(config)> aaa authentication ssh login public-key none
2620(config)> aaa authentication ssh enable public-key node
2620(config)> copy tftp pub-key-file 10.1.1.1 id_rsa.pub manager
2620(config)> write memory
2620(config)> reload
......@@ -204,10 +204,6 @@ Setting up an InstaGeni Rack. First, we need the following info:
5400(config)> no snmp-server community public
5400(config)> snmp-server community XXXXX manager unrestricted
5400(config)> password all (type in same password for manager/operator)
5400(config)> ip ssh
5400(config)> aaa authentication ssh login public-key none
5400(config)> aaa authentication ssh enable public-key none
5400(config)> copy tftp pub-key-file 10.3.1.1 id_rsa.pub manager
5400(config)> write memory
5400(config)> reload
......@@ -379,7 +375,20 @@ Setting up an InstaGeni Rack. First, we need the following info:
No such VLAN control-hardware in lans table
No worries, you can ignore it.
No worries, you can ignore it.
* Copy root publix ssh key to the tftp directory:
boss> sudo cp /root/.ssh/id_rsa.pub /tftpboot
* Telnet to procurve1 (/usr/testbed/etc/switch.pswd):
2629> config
2620(config)> ip ssh
2620(config)> aaa authentication ssh login public-key none
2620(config)> aaa authentication ssh enable public-key node
2620(config)> copy tftp pub-key-file 10.1.1.1 id_rsa.pub manager
2620(config)> write memory
* Telnet to procurve2 (/usr/testbed/etc/switch.pswd):
......@@ -390,6 +399,10 @@ Setting up an InstaGeni Rack. First, we need the following info:
5400(openFlow vlan-1750)# controller "tcp:10.3.1.7:6633" fail-secure on
5400(openFlow vlan-1750)# exit
5400(openFlow)# exit
5400(config)> ip ssh
5400(config)> aaa authentication ssh login public-key none
5400(config)> aaa authentication ssh enable public-key none
5400(config)> copy tftp pub-key-file 10.3.1.1 id_rsa.pub manager
5400(config)> write memory
* Add the public IP space, if appropriate. See the site survey response.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment