Commit 7642b6cd authored by Leigh B. Stoller's avatar Leigh B. Stoller
Browse files

Update after Mike put in new serial controller, and moved the tip

lines for plastic/tipserv1 to snake.
parent c70850f5
In case of emergency!
Booting paper
-------------
Booting paper/plastic/tipserv1
------------------------------
The tip line for paper is on snake.cs.utah.edu. (standard desktop
machine).
The tip lines for each of paper/plastic/tipserv1 are on snake.cs.utah.edu.
(standard desktop machine).
You can talk to power controller number 9 from snake by using "tip
apc" to talk to power9. User is "apc", password is "^pwr". The
......@@ -22,16 +22,3 @@ will run on the serial line. You can interrupt the boot there.
Note that Mike and I built/installed new boot blocks on paper/plastic
and snake that run at 115200. The defaul is 9600 for all 3 stages.
Booting plastic
---------------
The tip line for plastic is on paper. Same comments as above apply.
Remember that you can power cycle plastic from snake using the tip
line to the APC.
Booting tipserv1
----------------
The console line for tipserv1 is on plastic. At present there is no
power controller for it.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment