Increase the default mbuf pools; needed for new D430 nodes.

Also, sync up a couple of files with 10.2.

clientside/tmcc/freebsd10/group

-# $FreeBSD: releng/10.0/etc/group 256366 2013-10-12 06:08:18Z rpaulo $
+# $FreeBSD: releng/10.2/etc/group 256366 2013-10-12 06:08:18Z rpaulo $
 #
 wheel:*:0:root,toor
 daemon:*:1:
-kmem:*:2:root
-sys:*:3:root
-tty:*:4:root
+kmem:*:2:
+sys:*:3:
+tty:*:4:
 operator:*:5:root
 mail:*:6:
 bin:*:7:
@@ -31,7 +31,6 @@ www:*:80:
 hast:*:845:
 nogroup:*:65533:
 nobody:*:65534:
-sfs:*:171:
 messagebus:*:556:
 polkit:*:562:
 haldaemon:*:560:

clientside/tmcc/freebsd10/loader.conf

-console="comconsole"
-
 # No stupid menu
 beastie_disable="YES"
 
@@ -7,32 +5,54 @@ beastie_disable="YES"
 #if_ath_load="YES"
 #hw.bge.allow_asf=1
 
+#
+# If you are using an extra, regular (i.e., visible to the OS) Ethernet port
+# for your management interface, then you should disable it so that FreeBSD
+# won't mess with it. We have seen some implementations (e.g., Dell iDRAC on
+# R320) where FreeBSD's messing with the port will completely lockup the
+# interface such that no IPMI commands can be sent. This leaves you with no
+# option but to hard power cycle the node.
+#
+#hint.bge.1.disabled="1"
+
 # If you have lots of memory, set this to zero (9.0 and above)
 # We do this at Utah for d820 nodes with 128GB.
 hw.memtest.tests=0
 
-##
-## Some drivers, most notably the Intel 10Gb "ixgbe" driver are very liberal
-## with their mbuf allocation for RX buffers. That driver in particular
-## wants to allocate up to 2048 buffers per interface per CPU core (up to 8).
-## On the Utah d820 nodes that is 2048 * 4 * 8 == 65536 mbufs.
-##
-## This can cause dhclient to fail when it fires up all interfaces at once
-## and the kernel runs out of mbufs.
-##
-## At Utah we avoid this by not dhcp'ing on the "ix" interfaces (see
-## /etc/rc.d/netif-emulab) because they are never the control net. But if
-## you have a 10Gb control net, or some other interface that allocates
-## excessive mbufs, you may need to try the following settings or something
-## even larger. Note that the relationship between the four values is the
-## same as what FreeBSD uses for the defaults; i.e., each value is half the
-## preceding value.
-##
-#kern.ipc.nmbclusters=131072
-#kern.ipc.nmbjumbop=65536
-#kern.ipc.nmbjumbo16=32768
-#kern.ipc.nmbjumbo9=16384
+# force use of newer LSI megaraid driver (for UWisc)
+hw.mfi.mrsas_enable=1
+
+#
+# Some drivers, most notably the Intel 10Gb "ixgbe" driver and newer 1Gb
+# drivers, are very liberal with their mbuf allocation for RX buffers.
+# The ixgbe driver in particular wants to allocate up to 2048 buffers
+# per interface per CPU core (up to 8). On the Utah d820 nodes that is
+# 2048 * 4 * 8 == 65536 mbufs.
+#
+# This can cause dhclient to fail when it fires up all interfaces at once
+# and the kernel runs out of mbufs.
+#
+# At Utah we avoid this by not dhcp'ing on the "ix" interfaces (see
+# /etc/rc.d/netif-emulab) because they are never the control net. But if
+# you have a 10Gb control net, or some other interface that allocates
+# excessive mbufs, you may need to try the following settings or something
+# even larger. Note that the relationship between the four values is the
+# same as what FreeBSD uses for the defaults; i.e., each value is half the
+# preceding value.
+#
+# Someday, these values will get re-adjusted in the Emulab startup scripts
+# to a more appropriate value based on the size of RAM and total number of
+# interfaces.
+#
+kern.ipc.nmbclusters=65536
+kern.ipc.nmbjumbop=32768
+kern.ipc.nmbjumbo16=16384
+kern.ipc.nmbjumbo9=8192
 
 # force module path, our pxeboot can mess it up
 module_path="/boot/kernel;/boot/modules"
 
+# The remaining lines were added by Emulab slicefix.
+# DO NOT ADD ANYTHING AFTER THIS POINT AS IT WILL GET REMOVED.
+# setting console to sio1
+console="comconsole"

clientside/tmcc/freebsd10/master.passwd

-# $FreeBSD: releng/10.0/etc/master.passwd 256366 2013-10-12 06:08:18Z rpaulo $
+# $FreeBSD: releng/10.2/etc/master.passwd 256366 2013-10-12 06:08:18Z rpaulo $
 #
 root:$1$0DKicYf8$PsfF3uhmTrtuaJKH/rxtQ/:0:0::0:0:Charlie &:/root:/bin/csh
 toor:$1$0DKicYf8$PsfF3uhmTrtuaJKH/rxtQ/:0:0::0:0:Chaplin &:/root:/bin/csh
@@ -24,7 +24,6 @@ auditdistd:*:78:77::0:0:Auditdistd unprivileged user:/var/empty:/usr/sbin/nologi
 www:*:80:80::0:0:World Wide Web Owner:/nonexistent:/usr/sbin/nologin
 hast:*:845:845::0:0:HAST unprivileged user:/var/empty:/usr/sbin/nologin
 nobody:*:65534:65534::0:0:Unprivileged user:/nonexistent:/usr/sbin/nologin
-sfs:*:171:171::0:0:SFS pseudo-user:/:/usr/sbin/nologin
 messagebus:*:556:556::0:0:D-BUS Daemon User:/nonexistent:/usr/sbin/nologin
 polkit:*:562:562::0:0:PolicyKit Daemon User:/nonexistent:/usr/sbin/nologin
 haldaemon:*:560:560::0:0:HAL Daemon User:/nonexistent:/usr/sbin/nologin