ops-install.in

#!/usr/bin/perl -w

#
# EMULAB-COPYRIGHT
# Copyright (c) 2003 University of Utah and the Flux Group.
# All rights reserved.
#

#
# install-ops.sh - Script to do the initial install of an ops node
#
# The main things it does not do yet:
# * Figure out where to put directories such as /users /proj - they must
#   already exist
# * Fill out mailing list files - presumably, it's easier to just get the
#   User to edit them himself
#

#
# Configure variables
#
my $PREFIX = '@prefix@';

my @MAILING_LISTS = ("@TBOPSEMAIL@","@TBLOGSEMAIL@","@TBWWWEMAIL@",
    "@TBAPPROVALEMAIL@","@TBAUDITEMAIL@","@TBSTATEDEMAIL@",
    "@TBTESTSUITEEMAIL@");


my $OURDOMAIN = '@OURDOMAIN@';

my $USERNODE = '@USERNODE@';
my $FSNODE =   '@FSNODE@';
my $BOSSNODE = '@BOSSNODE@';

#
# Allow this to work if the library is left in the source directory
#
use lib '@srcdir@';
   
use English;
use libinstall;

#
# Some programs we use
#
my $CHGRP      = "/usr/bin/chgrp";
my $CHMOD      = "/bin/chmod";
my $PW         = "/usr/sbin/pw";
my $NEWALIASES = "/usr/bin/newaliases";
my $SH         = "/bin/sh";
my $PKG_INFO   = "/usr/sbin/pkg_info";
my $PWD        = "/bin/pwd";

#
# Some files we edit/create
#
my $RCCONF          = "/etc/rc.conf";
my $RCLOCAL         = "/etc/rc.local";
my $RCCAPTURE       = "$PREFIX/etc/rc.capture";
my $LOCAL_HOSTNAMES = "/etc/mail/local-host-names";
my $ALIASES_FILE    = "/etc/mail/aliases";
my $EXPORTS_FILE    = "/etc/exports";
my $EXPORTS_HEAD    = "$EXPORTS_FILE.head";
my $SYSLOG_CONF     = "/etc/syslog.conf";
my $NEWSYSLOG_CONF  = "/etc/newsyslog.conf";
my $SUDOERS         = "/usr/local/etc/sudoers";
my $SSHD_CONFIG     = "/etc/ssh/sshd_config";
my $CRONTAB         = "/etc/crontab";

#
# Some directories we care about
#
my $LIST_DIR   = "/etc/mail/lists";
my $TIPLOG_DIR = "/var/log/tiplogs";
my $PORTSDIR   = "/usr/ports/misc";
my $SRCDIR     = '@srcdir@';

#
# And some lists that we use
#
my @LOCAL_HOSTS       = ($OURDOMAIN,$BOSSNODE,$USERNODE,$FSNODE);
my @LOGFILES          = ("/var/log/logins","/var/log/tiplogs/capture.log",
    "/var/log/mountd.log");
my @MAILING_LIST_NAMES = map { /^([\w-]+)\@/ } @MAILING_LISTS;

my @TESTBED_DIRS       = ([$PREFIX, "0775"], ["/users", "0755"],
    ["/proj", "0755"], ["/groups", "0755"], ["/share", "0775"]);

#
# Make sure they know what they're getting into...
#
print STDERR "WARNING: This script is ONLY intended to be run on a machine\n";
print STDERR "that is being set up as a dedicated ops node. Continue? [y/N] ";
my $response = <>;
die "Installation aborted!\n" unless ($response =~ /^y/i);

if ($UID != 0) {
    die "This script must be run as root.\n";
}

#
# The phases are fairly self-explanatory
#

Phase "groups", "Creating admin group", sub {
    if (getgrnam("tbadmin")) {
	PhaseSkip("tbadmin group already exists");
    }
    ExecQuietFatal("$PW groupadd tbadmin -g 101");
};

Phase "dirs", "Setting directory permissions", sub {
    foreach my $dirref (@TESTBED_DIRS) {
	my ($dir, $newmode) = @$dirref;
	Phase $dir, $dir, sub {
	    if (!-d $dir) {
		PhaseFail("Directory $dir does not exist");
	    }
	    # Use the real path, to avoid symlink problems
	    my $realdir = `realpath $dir`;
	    chomp $realdir;
	    my ($mode,$group) = (stat($realdir))[2,5];
	    # Fix up the mode (strip file type)
	    $mode = $mode & 0777;
	    if ($mode == eval $newmode && $group eq getgrnam("tbadmin")) {
		PhaseSkip("Already done");
	    }
	    ExecQuietFatal("$CHGRP tbadmin $realdir");
	    ExecQuietFatal("$CHMOD $newmode $realdir");
	};
    }
};

Phase "ports", "Installing ports", sub {
    Phase "pcopy", "Copying ports into place", sub {
	DoneIfExists("$PORTSDIR/emulab-ops");
	ExecQuietFatal("$SH $SRCDIR/ports/ports-install");
    };
    Phase "pinstall", "Installing ports (may take a while)", sub {
	if (!ExecQuiet("$PKG_INFO -e emulab-ops-1.1")) {
	    PhaseSkip("Ports already installed");
	}

	#
	# This port is dead-simple, so it's safe to do it from this script
	#
	my $pwd = `$PWD`;
	chomp $pwd;
	chdir "$PORTSDIR/emulab-ops" or
		PhaseFail "Unable to change to $PORTSDIR/emulab-ops: $!";
	ExecQuietFatal("make install");
	chdir $pwd;
    };
};

Phase "rc.conf", "Adding testbed content to rc.conf", sub {
    DoneIfEdited($RCCONF);
    AppendToFileFatal($RCCONF,
		      qq|sendmail_enable="YES"|,
		      qq|nfs_server_enable="YES"|,
		      qq|nfs_server_flags="-u -t -n 16"|,
		      qq|syslogd_flags=""|);
};

Phase "sendmail","Configuring sendmail", sub {
    Phase "localhosts", "Setting up $LOCAL_HOSTNAMES", sub {
	DoneIfExists($LOCAL_HOSTNAMES);
	CreateFileFatal($LOCAL_HOSTNAMES,@LOCAL_HOSTS);
    };
    Phase "maillists", "Setting up mailing lists", sub {
	Phase "listdir", "Creating $LIST_DIR", sub { 
	    DoneIfExists($LIST_DIR);
	    mkdir($LIST_DIR,0755) or
		PhaseFail("Unable to create $LIST_DIR: $!");
	};
	Phase "listfiles", "Creating mailing list files", sub {
	    foreach my $list (@MAILING_LIST_NAMES) {
		Phase $list, $list, sub {
		    DoneIfExists("$LIST_DIR/$list");
		    CreateFileFatal("$LIST_DIR/$list");
		};
	    }
	};
	Phase "aliases", "Adding lists to $ALIASES_FILE", sub {
	    DoneIfEdited($ALIASES_FILE);
	    AppendToFileFatal($ALIASES_FILE,
		map("$_:\t:include:$LIST_DIR/$_",@MAILING_LIST_NAMES));
	};
	Phase "newaliases", "Running newaliases", sub {
	    PhaseSkip("No new aliases") unless @MAILING_LISTS;
	    PhaseSkip("No new aliases") if PhaseWasSkipped("aliases");
	    ExecQuietFatal($NEWALIASES);
	};
    };
};


Phase "exports", "Setting up exports", sub {
    Phase "ex.head", "Creating $EXPORTS_HEAD", sub {
	DoneIfExists($EXPORTS_HEAD);

	#
	# Figure out which of these directories are on the same
	# filesystems
	#
	my @dirs = ('/users','/groups','/proj','/share','/var','/usr/testbed');
	@dirs = map {`realpath $_`} @dirs;
	chomp @dirs;
	my %filesystems;
	foreach my $dir (@dirs) {
	    my ($dev,@junk) = stat $dir;
	    push @{$filesystems{$dev}}, $dir;
	}

	#
	# Use that knowledge to create lines for /etc/exports.head
	#
	my @exports_lines;
	foreach my $key (keys %filesystems) {
	    push @exports_lines,
		join(" ",@{$filesystems{$key}}) . "\t$BOSSNODE -maproot=root";
	}

	#
	# Put them in exports.head, and copy that to /etc/exports
	#
	CreateFileFatal($EXPORTS_HEAD, @exports_lines);
	ExecQuietFatal("cp $EXPORTS_HEAD $EXPORTS_FILE");
    };

    # XXX Newhup
    Phase "mountd", "HUPing mountd", sub {
	PhaseSkip("No new exports file") if PhaseWasSkipped("ex.head");
	PhaseSkip("mountd not running") unless `ps -auxw | grep mountd | grep -v grep`;
	ExecQuietFatal("killall -HUP mountd");
    };
};

#
# Set up syslog
#
Phase "syslog", "Setting up syslog", sub {
    Phase "sysconf", "Editing $SYSLOG_CONF", sub {
	DoneIfEdited($SYSLOG_CONF);
	
	#
	# Can't just append to this file, unfortunately. Have to put some of
	# the lines in the middle of the file
	#
	open(SC,"+<$SYSLOG_CONF") or
	    PhaseFail("Unable to open $SYSLOG_CONF : $!");
	my @sc = <SC>;
	if (scalar(grep(/^cron/, @sc)) != 1) {
	    PhaseFail("Unable to find marker in /etc/syslog.conf!");
	}

	#
	# Clobber and re-write
	#
	seek(SC,0,0);
	truncate(SC,0);

	#
	# Find the cron line, after which we place our auth.info line
	#
	foreach my $line (@sc) {
	    print SC $line;
	    if ($line =~ /^cron/) {
		print SC "# " . MAGIC_TESTBED_START . "\n";
		print SC "auth.info\t\t\t\t\t/var/log/logins\n";
		print SC "# " . MAGIC_TESTBED_END . "\n";
	    }
	}

	#
	# Put a few more lines at the end
	#
	print SC "# " . MAGIC_TESTBED_START . "\n";
	print SC "!capture\n";
	print SC "*.*\t\t\t\t\t\t/var/log/tiplogs/capture.log\n";
	print SC "!mountd\n";
	print SC "*.*\t\t\t\t\t\t/var/log/mountd.log\n";
	print SC "# " . MAGIC_TESTBED_END . "\n";
	close SC;
    };

    Phase "tiplog", "Creating $TIPLOG_DIR", sub {
	DoneIfExists($TIPLOG_DIR);
	mkdir($TIPLOG_DIR,0755) or PhaseFail("Unable to make $TIPLOG_DIR : $!");
    };
    
    Phase "logfiles", "Creating log files", sub {
	foreach my $logfile (@LOGFILES) {
	    Phase $logfile, $logfile, sub {
		DoneIfExists($logfile);
		CreateFileFatal($logfile);
		ExecQuietFatal("$CHGRP tbadmin $logfile");
		ExecQuietFatal("$CHMOD 640 $logfile");
	    };
	}
    };

    Phase "newsyslog", "Setting up $NEWSYSLOG_CONF", sub {
	DoneIfEdited($NEWSYSLOG_CONF);
	AppendToFileFatal($NEWSYSLOG_CONF,
	    "/var/log/logins\t\t\t\t640  7     200 *      Z",
	    "/var/log/mountd.log\t\t\t640  5     200 *      Z",
	    "/var/log/tiplogs/capture.log\t\t644  7     *    168   Z");
    };
};

Phase "cron", "Adding cron jobs", sub {
    Phase "crontab", "Editing $CRONTAB", sub {
	DoneIfEdited($CRONTAB);
	AppendToFileFatal($CRONTAB,
	    "0 \t6\t*\t*\t*\troot\t$PREFIX/sbin/quotamail");
    };
    Phase "cronhup", "HUPing cron", sub {
	if (PhaseWasSkipped("crontab")) { PhaseSkip("No new crontab"); }
	HUPDaemon("cron");
    };
};

Phase "sudoers", "Editing $SUDOERS", sub {
    DoneIfEdited($SUDOERS);
    AppendToFileFatal($SUDOERS,"%wheel    ALL=(ALL) NOPASSWD: ALL");
};

Phase "ssh", "Allowing root ssh", sub {
    DoneIfEdited($SSHD_CONFIG);
    AppendToFileFatal($SSHD_CONFIG,"PermitRootLogin yes");
};

Phase "capture", "Setting up capture", sub {
    Phase "rc.local", "Creating $RCLOCAL", sub {
	DoneIfExists($RCLOCAL);
	CreateFileFatal($RCLOCAL,
	    "if [ -f /etc/defaults/rc.conf ]; then",
	    "\t. /etc/defaults/rc.conf",
	    "fi",
	    "",
	    "if [ -x $RCCAPTURE ]; then",
	    "\techo -n \" capture\"",
	    "\t$RCCAPTURE",
	    "fi");
    };
    Phase "etc", "Creating $PREFIX/etc", sub {
	DoneIfExists("$PREFIX/etc");
	mkdir("$PREFIX/etc",0755) or
	    PhaseFail("Unable to create $PREFIX/etc: $!");
    };
    Phase "rc.capture", "Creating empty $RCCAPTURE", sub {
	DoneIfExists($RCCAPTURE);
	CreateFileFatal($RCCAPTURE,"#!/bin/sh");
	ExecQuietFatal("$CHMOD a+rx $RCCAPTURE");
    };
};

print "----------------------------------------------------------------------\n";
print "Installation completed succesfully!\n";
print "Please reboot this machine before proceeding with boss setup\n";
if (!PhaseWasSkipped("maillists")) {
    print "Local mailing lists have been created, with no members, in\n";
    print "$LIST_DIR . Please add members to the following lists:\n";
    print map "$_\n", @MAILING_LISTS;
}