libsetup.pm 40.5 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13
#!/usr/bin/perl -wT

#
# Common routines and constants for the client bootime setup stuff.
#
package libsetup;
use Exporter;
@ISA = "Exporter";
@EXPORT =
    qw ( libsetup_init inform_reboot cleanup_node check_status
	 create_nicknames doifconfig dohostnames
	 doaccounts dorpms dotarballs dostartupcmd install_deltas
	 bootsetup nodeupdate startcmdstatus whatsmynickname
14
	 TBBackGround TBForkCmd remotenodeupdate remotenodevnodesetup
15

Leigh B. Stoller's avatar
Leigh B. Stoller committed
16
	 OPENTMCC CLOSETMCC RUNTMCC MFS REMOTE
17 18

	 TMCC TMIFC TMDELAY TMRPM TMTARBALLS TMHOSTS
19 20
	 TMNICKNAME HOSTSFILE TMSTARTUPCMD FINDIF TMTUNNELCONFIG
	 TMTRAFFICCONFIG TMROUTECONFIG TMVNODEDIR
21 22 23

	 TMCCCMD_REBOOT TMCCCMD_STATUS TMCCCMD_IFC TMCCCMD_ACCT TMCCCMD_DELAY
	 TMCCCMD_HOSTS TMCCCMD_RPM TMCCCMD_TARBALL TMCCCMD_STARTUP
24
	 TMCCCMD_DELTA TMCCCMD_STARTSTAT TMCCCMD_READY TMCCCMD_TRAFFIC
Leigh B. Stoller's avatar
Leigh B. Stoller committed
25
	 TMCCCMD_BOSSINFO TMCCCMD_VNODELIST TMCCCMD_ISALIVE
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

       );

# Must come after package declaration!
use English;

#
# This is the home of the setup library on the client machine. The including
# program has to tell us this by calling the init routine below. For example,
# it is /etc/testbed on FreeBSD and /etc/rc.d/testbed on Linux.
#
my $SETUPDIR;

sub libsetup_init($)
{
    my($path) = @_;

    $SETUPDIR = $path;
}

#
# This "local" library provides the OS dependent part. Must load this after
# defining the above function cause the local library invokes it to set the
# $SETUPDIR
#
use liblocsetup;

53 54 55 56 57 58 59
#
# For virtual (multiplexed nodes). If defined, tack onto tmcc command.
# and use in pathnames. Not sure how this will be used later with jailed
# virtual nodes, since they will run in their own environment, but without
# jail we have to share the same namespace.
#
my $vnodeid	= "";
60
my $vnodedir;
61

62 63 64 65 66 67 68 69 70 71 72 73 74 75
#
# These are the paths of various files and scripts that are part of the
# setup library.
#
sub TMCC()		{ "$SETUPDIR/tmcc"; }
sub TMIFC()		{ "$SETUPDIR/rc.ifc"; }
sub TMRPM()		{ "$SETUPDIR/rc.rpm"; }
sub TMTARBALLS()	{ "$SETUPDIR/rc.tarballs"; }
sub TMSTARTUPCMD()	{ "$SETUPDIR/startupcmd"; }
sub TMHOSTS()		{ "$SETUPDIR/hosts"; }
sub TMNICKNAME()	{ "$SETUPDIR/nickname"; }
sub FINDIF()		{ "$SETUPDIR/findif"; }
sub HOSTSFILE()		{ "/etc/hosts"; }
sub TMMOUNTDB()		{ "$SETUPDIR/mountdb"; }
76 77 78 79
sub TMROUTECONFIG()     { ($vnodedir ? $vnodedir : $SETUPDIR) . "/rc.route";}
sub TMTRAFFICCONFIG()	{ ($vnodedir ? $vnodedir : $SETUPDIR) . "/rc.traffic";}
sub TMTUNNELCONFIG()	{ ($vnodedir ? $vnodedir : $SETUPDIR) . "/rc.tunnel";}
sub TMVTUNDCONFIG()	{ ($vnodedir ? $vnodedir : $SETUPDIR) . "/vtund.conf";}
80 81
sub TMPASSDB()		{ "$SETUPDIR/passdb"; }
sub TMGROUPDB()		{ "$SETUPDIR/groupdb"; }
82 83

#
84 85 86 87 88
# This is the VERSION. We send it through to tmcd so it knows what version
# responses this file is expecting.
#
# BE SURE TO BUMP THIS AS INCOMPATIBILE CHANGES TO TMCD ARE MADE!
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
89
sub TMCD_VERSION()	{ 5; };
90 91 92

#
# These are the TMCC commands. 
93 94 95 96 97 98
#
sub TMCCCMD_REBOOT()	{ "reboot"; }
sub TMCCCMD_STATUS()	{ "status"; }
sub TMCCCMD_IFC()	{ "ifconfig"; }
sub TMCCCMD_ACCT()	{ "accounts"; }
sub TMCCCMD_DELAY()	{ "delay"; }
99
sub TMCCCMD_HOSTS()	{ "hostnames"; }
100 101 102 103 104 105 106
sub TMCCCMD_RPM()	{ "rpms"; }
sub TMCCCMD_TARBALL()	{ "tarballs"; }
sub TMCCCMD_STARTUP()	{ "startupcmd"; }
sub TMCCCMD_DELTA()	{ "deltas"; }
sub TMCCCMD_STARTSTAT()	{ "startstatus"; }
sub TMCCCMD_READY()	{ "ready"; }
sub TMCCCMD_MOUNTS()	{ "mounts"; }
107
sub TMCCCMD_ROUTING()	{ "routing"; }
108 109
sub TMCCCMD_TRAFFIC()	{ "trafgens"; }
sub TMCCCMD_BOSSINFO()	{ "bossinfo"; }
110
sub TMCCCMD_TUNNEL()	{ "tunnels"; }
111
sub TMCCCMD_NSECONFIGS(){ "nseconfigs"; }
112
sub TMCCCMD_VNODELIST() { "vnodelist"; }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
113
sub TMCCCMD_ISALIVE()   { "isalive"; }
114 115 116 117 118 119

#
# Some things never change.
# 
my $TARINSTALL  = "/usr/local/bin/install-tarfile %s %s";
my $DELTAINSTALL= "/usr/local/bin/install-delta %s";
120
my $VTUND       = "/usr/local/sbin/vtund";
121 122 123 124 125 126 127 128

#
# This is a debugging thing for my home network.
# 
#my $NODE	= "REDIRECT=155.101.132.101";
$NODE		= "";

# Locals
129 130 131 132
my $pid		= "";
my $eid		= "";
my $vname	= "";

Leigh B. Stoller's avatar
Leigh B. Stoller committed
133 134 135 136
# Control tmcc error condition and timeout. Dynamic, not lexical!
$tmccdie        = 1; 
$tmcctimeout    = 0;

137 138 139 140
# When on the MFS, we do a much smaller set of stuff.
# Cause of the way the packages are loaded (which I do not understand),
# this is computed on the fly instead of once.
sub MFS()	{ if (-e "$SETUPDIR/ismfs") { return 1; } else { return 0; } }
141

142 143 144 145 146
#
# Same for a remote node.
#
sub REMOTE()	{ if (-e "$SETUPDIR/isrem") { return 1; } else { return 0; } }

147 148 149 150
#
# Open a TMCC connection and return the "stream pointer". Caller is
# responsible for closing the stream and checking return value.
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
151
# usage: OPENTMCC(char *command, char *args, char *options)
152
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
153
sub OPENTMCC($;$$)
154
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
155
    my($cmd, $args, $options) = @_;
156
    my $vn = "";
157 158 159 160 161
    local *TM;

    if (!defined($args)) {
	$args = "";
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
162 163 164
    if (!defined($options)) {
	$options = "";
    }
165 166 167
    if ($vnodeid ne "") {
	$vn = "-n $vnodeid";
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
168 169 170
    if ($tmcctimeout) {
	$options .= " -t $tmcctimeout";
    }
171

Leigh B. Stoller's avatar
Leigh B. Stoller committed
172 173
    my $foo = sprintf("%s -v %d $options $NODE $vn $cmd $args |",
		      TMCC, TMCD_VERSION);
174

Leigh B. Stoller's avatar
Leigh B. Stoller committed
175 176 177 178 179
    if (!open(TM, $foo)) {
	print STDERR "Cannot start TMCC: $!\n";
	die("\n") if $tmccdie;
	return undef;
    }
180 181 182
    return (*TM);
}

183 184 185 186 187 188
#
# Close connection. Die on error.
# 
sub CLOSETMCC($) {
    my($TM) = @_;
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
189 190 191 192 193 194 195 196 197 198 199
    if (! close($TM)) {
	if ($?) {
	    print STDERR "TMCC exited with status $?!\n";
	}
	else {
	    print STDERR "Error closing TMCC pipe: $!\n";
	}
	die("\n") if $tmccdie;
	return 0;
    }
    return 1;
200 201
}

202 203 204
#
# Run a TMCC command with the provided arguments.
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
205
# usage: RUNTMCC(char *command, char *args, char *options)
206
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
207
sub RUNTMCC($;$$)
208
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
209
    my($cmd, $args, $options) = @_;
210 211 212 213 214
    my($TM);

    if (!defined($args)) {
	$args = "";
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
215 216 217
    if (!defined($options)) {
	$options = "";
    }
218
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
219
    $TM = OPENTMCC($cmd, $args, $options);
220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238

    close($TM)
	or die $? ? "TMCC exited with status $?" : "Error closing pipe: $!";
    
    return 0;
}

#
# Inform the master we have rebooted.
#
sub inform_reboot()
{
    RUNTMCC(TMCCCMD_REBOOT);
    return 0;
}

#
# Reset to a moderately clean state.
#
239 240 241
sub cleanup_node ($) {
    my ($scrub) = @_;
    
242 243
    print STDOUT "Cleaning node; removing configuration files ...\n";
    unlink TMIFC, TMRPM, TMSTARTUPCMD, TMNICKNAME, TMTARBALLS;
244
    unlink TMROUTECONFIG, TMTRAFFICCONFIG, TMTUNNELCONFIG;
245 246
    unlink TMMOUNTDB . ".db";

247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
    #
    # If scrubbing, remove the password/group file DBs so that we revert
    # to base set.
    # 
    if ($scrub) {
	unlink TMPASSDB . ".db";
	unlink TMGROUPDB . ".db";
    }

    if (! REMOTE()) {
	printf STDOUT "Resetting %s file\n", HOSTSFILE;
	if (system($CP, "-f", TMHOSTS, HOSTSFILE) != 0) {
	    printf "Could not copy default %s into place: $!\n", HOSTSFILE;
	    exit(1);
	}
262 263
    }

264
    return os_cleanup_node($scrub);
265 266 267 268 269 270 271 272 273 274 275 276 277
}

#
# Check node allocation.
#
# Returns 0 if node is free. Returns list (pid/eid/vname) if allocated.
#
sub check_status ()
{
    my $TM;
    
    $TM = OPENTMCC(TMCCCMD_STATUS);
    $_  = <$TM>;
278
    CLOSETMCC($TM);
279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302

    if ($_ =~ /^FREE/) {
	return 0;
    }
    
    if ($_ =~ /ALLOCATED=([-\@\w.]*)\/([-\@\w.]*) NICKNAME=([-\@\w.]*)/) {
	$pid   = $1;
	$eid   = $2;
	$vname = $3;
    }
    else {
	warn "*** WARNING: Error getting reservation status\n";
	return 0;
    }
    return ($pid, $eid, $vname);
}

#
# Stick our nickname in a file in case someone wants it.
#
sub create_nicknames()
{
    open(NICK, ">" . TMNICKNAME)
	or die("Could not open nickname file: $!");
303
    print NICK "$vname.$eid.$pid\n";
304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328
    close(NICK);

    return 0;
}

#
# Process mount directives from TMCD. We keep track of all the mounts we
# have added in here so that we delete just the accounts we added, when
# project membership changes. Same goes for project directories on shared
# nodes. We use a simple perl DB for that.
#
sub domounts()
{
    my $TM;
    my %MDB;
    my %mounts;
    my %deletes;
    
    $TM = OPENTMCC(TMCCCMD_MOUNTS);

    while (<$TM>) {
	if ($_ =~ /REMOTE=([-:\@\w\.\/]+) LOCAL=([-\@\w\.\/]+)/) {
	    $mounts{$1} = $2;
	}
    }
329 330
    CLOSETMCC($TM);
    
331 332 333 334
    #
    # The MFS version does not support (or need) this DB stuff. Just mount
    # them up.
    #
335
    if (MFS()) {
336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352
	while (($remote, $local) = each %mounts) {
	    if (! -e $local) {
		if (! os_mkdir($local, 0770)) {
		    warn "*** WARNING: Could not make directory $local: $!\n";
		    next;
		}
	    }
	
	    print STDOUT "  Mounting $remote on $local\n";
	    if (system("$MOUNT $remote $local")) {
		warn "*** WARNING: Could not $MOUNT $remote on $local: $!\n";
		next;
	    }
	}
	return 0;
    }

353 354 355 356 357 358 359 360 361 362 363 364 365
    dbmopen(%MDB, TMMOUNTDB, 0660);
    
    #
    # First mount all the mounts we are told to. For each one that is not
    # currently mounted, and can be mounted, add it to the DB.
    # 
    while (($remote, $local) = each %mounts) {
	if (system("$MOUNT | $EGREP ' $local '") == 0) {
	    $MDB{$remote} = $local;
	    next;
	}

	if (! -e $local) {
366
	    if (! os_mkdir($local, 0770)) {
367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426
		warn "*** WARNING: Could not make directory $local: $!\n";
		next;
	    }
	}
	
	print STDOUT "  Mounting $remote on $local\n";
	if (system("$MOUNT $remote $local")) {
	    warn "*** WARNING: Could not $MOUNT $remote on $local: $!\n";
	    next;
	}

	$MDB{$remote} = $local;
    }

    #
    # Now unmount the ones that we mounted previously, but are now no longer
    # in the mount set (as told to us by the TMCD). Note, we cannot delete 
    # them directly from MDB since that would mess up the foreach loop, so
    # just stick them in temp and postpass it.
    #
    while (($remote, $local) = each %MDB) {
	if (defined($mounts{$remote})) {
	    next;
	}

	if (system("$MOUNT | $EGREP ' $local '")) {
	    $deletes{$remote} = $local;
	    next;
	}

	print STDOUT "  Unmounting $local\n";
	if (system("$UMOUNT $local")) {
	    warn "*** WARNING: Could not unmount $local\n";
	    next;
	}
	
	#
	# Only delete from set if we can actually unmount it. This way
	# we can retry it later (or next time).
	# 
	$deletes{$remote} = $local;
    }
    while (($remote, $local) = each %deletes) {
	delete($MDB{$remote});
    }

    # Write the DB back out!
    dbmclose(%MDB);

    return 0;
}

#
# Do interface configuration.    
# Write a file of ifconfig lines, which will get executed.
#
sub doifconfig ()
{
    my $TM;
    
427 428 429 430 431 432 433 434 435 436
    #
    # Kinda ugly, but there is too much perl goo included by Socket to put it
    # on the MFS. 
    # 
    if (MFS()) {
	return 1;
    }
    require Socket;
    import Socket;
    
437 438 439 440 441 442 443 444 445 446 447
    $TM = OPENTMCC(TMCCCMD_IFC);

    #
    # Open a connection to the TMCD, and then open a local file into which
    # we write ifconfig commands (as a shell script).
    # 
    open(IFC, ">" . TMIFC)
	or die("Could not open " . TMIFC . ": $!");
    print IFC "#!/bin/sh\n";
    
    while (<$TM>) {
448 449 450 451 452 453 454 455 456
	my $pat;

	#
	# Note that speed has a units spec: (K|M)bps
	# 
	$pat  = q(INTERFACE=(\d*) INET=([0-9.]*) MASK=([0-9.]*) MAC=(\w*) );
	$pat .= q(SPEED=(\w*) DUPLEX=(\w*));
	
	if ($_ =~ /$pat/) {
457 458
	    my $iface;

459 460 461 462 463 464
	    my $inet     = $2;
	    my $mask     = $3;
	    my $mac      = $4;
	    my $speed    = $5; 
	    my $duplex   = $6;
	    my $routearg = inet_ntoa(inet_aton($inet) & inet_aton($mask));
465 466 467 468

	    if ($iface = findiface($mac)) {
		my $ifline =
		    os_ifconfig_line($iface, $inet, $mask, $speed, $duplex);
469 470 471
		    
		print STDOUT "  $ifline\n";
		print IFC "$ifline\n";
472
		print IFC TMROUTECONFIG . " $routearg up\n";
473 474
	    }
	    else {
475
		warn "*** WARNING: Bad MAC: $mac\n";
476 477 478 479 480 481
	    }
	}
	else {
	    warn "*** WARNING: Bad ifconfig line: $_";
	}
    }
482
    CLOSETMCC($TM);
483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509
    close(IFC);
    chmod(0755, TMIFC);

    return 0;
}

#
# Convert from MAC to iface name (eth0/fxp0/etc) using little helper program.
# 
sub findiface($)
{
    my($mac) = @_;
    my($iface);

    open(FIF, FINDIF . " $mac |")
	or die "Cannot start " . FINDIF . ": $!";

    $iface = <FIF>;
    
    if (! close(FIF)) {
	return 0;
    }
    
    $iface =~ s/\n//g;
    return $iface;
}

510 511 512 513 514 515 516 517
#
# Do router configuration stuff. This just writes a file for someone else
# to deal with.
#
sub dorouterconfig ()
{
    my @stuff   = ();
    my $routing = 0;
518 519
    my %upmap   = ();
    my %downmap = ();
520 521 522 523 524 525
    my $TM;

    $TM = OPENTMCC(TMCCCMD_ROUTING);
    while (<$TM>) {
	push(@stuff, $_);
    }
526
    CLOSETMCC($TM);
527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547

    if (! @stuff) {
	return 0;
    }

    #
    # Look for router type. If none, then do not bother to write this file.
    # 
    foreach my $line (@stuff) {
	if (($line =~ /ROUTERTYPE=(.+)/) && ($1 ne "none")) {
	    $routing = 1;
	    last;
	}
    }
    if (! $routing) {
	return 0;
    }
    
    open(RC, ">" . TMROUTECONFIG)
	or die("Could not open " . TMROUTECONFIG . ": $!");

548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566
    print RC "#!/bin/sh\n";
    print RC "# auto-generated by libsetup.pm, DO NOT EDIT\n";

    #
    # Now convert static route info into OS route commands
    # Also check for use of gated and remember it.
    #
    my $usegated = 0;
    my $pat;

    #
    # ROUTERTYPE=manual
    # ROUTE DEST=192.168.2.3 DESTTYPE=host DESTMASK=255.255.255.0 \
    #	NEXTHOP=192.168.1.3 COST=0
    #
    $pat = q(ROUTE DEST=([0-9\.]*) DESTTYPE=(\w*) DESTMASK=([0-9\.]*) );
    $pat .= q(NEXTHOP=([0-9\.]*) COST=([0-9]*));

    my $usemanual = 0;
567
    foreach my $line (@stuff) {
568 569 570 571 572
	if ($line =~ /ROUTERTYPE=(gated|ospf)/) {
	    $usegated = 1;
	} elsif ($line =~ /ROUTERTYPE=(manual|static)/) {
	    $usemanual = 1;
	} elsif ($usemanual && $line =~ /$pat/) {
573
	    my $dip   = $1;
574 575
	    my $rtype = $2;
	    my $dmask = $3;
576 577 578
	    my $gate  = $4;
	    my $cost  = $5;
	    my $routearg = inet_ntoa(inet_aton($gate) & inet_aton($dmask));
579

580 581 582 583 584 585 586 587
	    if (! defined($upmap{$routearg})) {
		$upmap{$routearg} = [];
		$downmap{$routearg} = [];
	    }
	    $rcline = os_routing_add_manual($rtype, $dip, $dmask, $gate,$cost);
	    push(@{$upmap{$routearg}}, $rcline);
	    $rcline = os_routing_del_manual($rtype, $dip, $dmask, $gate,$cost);
	    push(@{$downmap{$routearg}}, $rcline);
588 589 590 591 592
	} else {
	    warn "*** WARNING: Bad routing line: $line\n";
	}
    }

593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617
    print RC "case \"\$1\" in\n";
    foreach my $arg (keys(%upmap)) {
	print RC "  $arg)\n";
	print RC "    case \"\$2\" in\n";
	print RC "      up)\n";
	foreach my $rcline (@{$upmap{$arg}}) {
	    print RC "        $rcline\n";
	}
	print RC "      ;;\n";
	print RC "      down)\n";
	foreach my $rcline (@{$downmap{$arg}}) {
	    print RC "        $rcline\n";
	}
	print RC "      ;;\n";
	print RC "    esac\n";
	print RC "  ;;\n";
    }
    print RC "  enable)\n";

    #
    # Turn on IP forwarding
    #
    my $rcline = os_routing_enable_forward();
    print RC "    $rcline\n";

618 619 620 621 622 623 624 625 626
    #
    # Finally, enable gated if desired.
    #
    # Note that we allow both manually-specified static routes and gated
    # though more work may be needed on the gated config files to make
    # this work (i.e., to import existing kernel routes).
    #
    if ($usegated) {
	$rcline = os_routing_enable_gated();
627
	print RC "    $rcline\n";
628
    }
629 630 631
    print RC "  ;;\n";
    print RC "esac\n";
    print RC "exit 0\n";
632

633
    close(RC);
634
    chmod(0755, TMROUTECONFIG);
635 636 637 638

    return 0;
}

639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661
#
# Host names configuration (/etc/hosts). 
#
sub dohostnames ()
{
    my $TM;

    #
    # Start with fresh copy, since the hosts files is potentially updated
    # after the node boots via the update command.
    # 
    if (system($CP, "-f", TMHOSTS, HOSTSFILE) != 0) {
	printf STDERR "Could not copy default %s into place: $!\n", HOSTSFILE;
	return 1;
    }
    
    $TM = OPENTMCC(TMCCCMD_HOSTS);

    open(HOSTS, ">>" . HOSTSFILE)
	or die("Could not open $HOSTSFILE: $!");

    #
    # Now convert each hostname into hosts file representation and write
662 663 664 665 666
    # it to the hosts file. Note that ALIASES is for backwards compat.
    # Should go away at some point.
    #
    my $pat  = q(NAME=([-\w\.]+) IP=([0-9\.]*) ALIASES=\'([-\w\. ]*)\');
    
667
    while (<$TM>) {
668 669 670 671 672 673
	if ($_ =~ /$pat/) {
	    my $name    = $1;
	    my $ip      = $2;
	    my $aliases = $3;
	    
	    my $hostline = os_etchosts_line($name, $ip, $aliases);
674 675 676 677 678 679 680 681
	    
	    print STDOUT "  $hostline\n";
	    print HOSTS  "$hostline\n";
	}
	else {
	    warn "*** WARNING: Bad hosts line: $_";
	}
    }
682
    CLOSETMCC($TM);
683 684 685 686 687
    close(HOSTS);

    return 0;
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
688
sub doaccounts()
689 690
{
    my %newaccounts = ();
691
    my %newgroups   = ();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
692
    my %pubkeys     = ();
693
    my %deletes     = ();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
694
    my %lastmod     = ();
695 696
    my %PWDDB;
    my %GRPDB;
697 698 699 700

    my $TM = OPENTMCC(TMCCCMD_ACCT);

    #
701 702 703 704 705 706
    # The strategy is to keep a record of all the groups and accounts
    # added by the testbed system so that we know what to remove. We
    # use a vanilla perl dbm for that, one for the groups and one for
    # accounts. 
    #
    # First just get the current set of groups/accounts from tmcd.
707 708 709
    #
    while (<$TM>) {
	if ($_ =~ /^ADDGROUP NAME=([-\@\w.]+) GID=([0-9]+)/) {
710 711 712
	    #
	    # Group info goes in the hash table.
	    #
713 714
	    my $gname = "$1";
	    
715
	    if (REMOTE()) {
716
		$gname = "emu-${gname}";
717
	    }
718
	    $newgroups{"$gname"} = $2
719 720 721 722 723 724 725 726
	}
	elsif ($_ =~ /^ADDUSER LOGIN=([0-9a-z]+)/) {
	    #
	    # Account info goes in the hash table.
	    # 
	    $newaccounts{$1} = $_;
	    next;
	}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
727 728 729 730 731 732 733 734 735 736
	elsif ($_ =~ /^PUBKEY LOGIN=([0-9a-z]+) KEY="(.*)"/) {
	    #
	    # Keys go into hash as a list of keys.
	    #
	    if (! defined($pubkeys{$1})) {
		$pubkeys{$1} = [];
	    }
	    push(@{$pubkeys{$1}}, $2);
	    next;
	}
737
	else {
738
	    warn "*** WARNING: Bad accounts line: $_\n";
739 740
	}
    }
741
    CLOSETMCC($TM);
742

743 744 745 746 747 748
    dbmopen(%PWDDB, TMPASSDB, 0660) or
	die("Cannot open " . TMPASSDB . ": $!\n");
	
    dbmopen(%GRPDB, TMGROUPDB, 0660) or
	die("Cannot open " . TMGROUPDB . ": $!\n");

749
    #
750 751
    # Create any groups that do not currently exist. Add each to the
    # DB as we create it.
752
    #
753 754 755 756 757 758
    while (($group, $gid) = each %newgroups) {
	my ($exists,undef,$curgid) = getgrnam($group);
	
	if ($exists) {
	    if ($gid != $curgid) {
		warn "*** WARNING: $group/$gid mismatch with existing group\n";
759
	    }
760
	    next;
761
	}
762 763 764 765 766 767 768 769 770

	print "Adding group: $group/$gid\n";
	    
	if (os_groupadd($group, $gid)) {
	    warn "*** WARNING: Error adding new group $group/$gid\n";
	    next;
	}
	# Add to DB only if successful. 
	$GRPDB{$group} = $gid;
771 772 773
    }

    #
774 775 776 777
    # Now remove the ones that we created previously, but are now no longer
    # in the group set (as told to us by the TMCD). Note, we cannot delete 
    # them directly from the hash since that would mess up the foreach loop,
    # so just stick them in temp and postpass it.
778
    #
779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794
    while (($group, $gid) = each %GRPDB) {
	if (defined($newgroups{$group})) {
	    next;
	}

	print "Removing group: $group/$gid\n";
	
	if (os_groupdel($group)) {
	    warn "*** WARNING: Error removing group $group/$gid\n";
	    next;
	}
	# Delete from DB only if successful. 
	$deletes{$group} = $gid;
    }
    while (($group, $gid) = each %deletes) {
	delete($GRPDB{$group});
795
    }
796 797 798 799
    %deletes = ();

    # Write the DB back out!
    dbmclose(%GRPDB);
800 801

    #
802 803 804
    # Repeat the same sequence for accounts, except we remove old accounts
    # first. 
    # 
Leigh B. Stoller's avatar
Leigh B. Stoller committed
805 806 807 808 809 810 811 812 813 814 815 816 817
    while (($login, $info) = each %PWDDB) {
	my $uid = $info;
	
	#
	# Split out the uid from the serial. Note that this was added later
	# so existing DBs might not have a serial yet. We save the serial
	# for later. 
	#
	if ($info =~ /(\d*):(\d*)/) {
	    $uid = $1;
	    $lastmod{$login} = $2;
	}
	
818 819 820
	if (defined($newaccounts{$login})) {
	    next;
	}
821

822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861
	my ($exists,undef,$curuid,undef,
	    undef,undef,undef,$homedir) = getpwnam($login);

	#
	# If the account is gone, someone removed it by hand. Remove it
	# from the DB so we do not keep trying.
	#
	if (! defined($exists)) {
	    warn "*** WARNING: Account for $login was already removed!\n";
	    $deletes{$login} = $login;
	    next;
	}

	#
	# Check for mismatch, just in case. If there is a mismatch remove it
	# from the DB so we do not keep trying.
	#
	if ($uid != $curuid) {
	    warn "*** WARNING: ".
		 "Account uid for $login has changed ($uid/$curuid)!\n";
	    $deletes{$login} = $login;
	    next;
	}
	
	print "Removing user: $login\n";
	
	if (os_userdel($login) != 0) {
	    warn "*** WARNING: Error removing user $login\n";
	    next;
	}

	#
	# Remove the home dir. 
	#
	# Must ask for the current home dir in case it came from pw.conf.
	#
	if (defined($homedir) &&
	    index($homedir, "/${login}")) {
	    if (os_homedirdel($login, $homedir) != 0) {
	        warn "*** WARNING: Could not remove homedir $homedir.\n";
862 863
	    }
	}
864 865 866 867 868 869 870
	
	# Delete from DB only if successful. 
	$deletes{$login} = $login;
    }
    
    while (($login, $foo) = each %deletes) {
	delete($PWDDB{$login});
871 872
    }

873
    my $pat = q(ADDUSER LOGIN=([0-9a-z]+) PSWD=([^:]+) UID=(\d+) GID=(.*) );
874
    $pat   .= q(ROOT=(\d) NAME="(.*)" HOMEDIR=(.*) GLIST="(.*)" );
Leigh B. Stoller's avatar
Leigh B. Stoller committed
875
    $pat   .= q(SERIAL=(\d+));
876 877

    while (($login, $info) = each %newaccounts) {
878
	if ($info =~ /$pat/) {
879 880 881 882 883 884 885
	    $pswd  = $2;
	    $uid   = $3;
	    $gid   = $4;
	    $root  = $5;
	    $name  = $6;
	    $hdir  = $7;
	    $glist = $8;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
886
	    $serial= $9;
887 888 889
	    if ( $name =~ /^(([^:]+$|^))$/ ) {
		$name = $1;
	    }
890

Leigh B. Stoller's avatar
Leigh B. Stoller committed
891 892 893 894 895 896 897 898 899
	    #
	    # See if update needed, based on the serial number we get.
	    # If its different, the account info has changed.
	    # 
	    my $doupdate = 0;
	    if (!defined($lastmod{$login}) || $lastmod{$login} != $serial) {
		$doupdate = 1;
	    }
	    
900
	    my ($exists,undef,$curuid) = getpwnam($login);
901 902

	    if ($exists) {
903 904 905 906 907 908 909 910 911 912
		if (!defined($PWDDB{$login})) {
		    warn "*** WARNING: ".
			 "Skipping since $login existed before EmulabMan!\n";
		    next;
		}
		if ($curuid != $uid) {
		    warn "*** WARNING: ".
			 "$login/$uid uid mismatch with existing login.\n";
		    next;
		}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
913 914 915 916 917 918 919 920 921 922 923
		if ($doupdate) {
		    print "Updating: ".
			"$login/$uid/$gid/$root/$name/$hdir/$glist\n";
		    
		    os_usermod($login, $gid, "$glist", $pswd, $root);

		    #
		    # Note that we changed the info for next time.
		    # 
		    $PWDDB{$login} = "$uid:$serial";
		}
924
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
925 926
	    else {
		print "Adding: $login/$uid/$gid/$root/$name/$hdir/$glist\n";
927

Leigh B. Stoller's avatar
Leigh B. Stoller committed
928 929 930 931 932 933 934 935 936 937 938 939 940 941
		if (os_useradd($login, $uid, $gid, $pswd, 
			       "$glist", $hdir, $name, $root)) {
		    warn "*** WARNING: Error adding new user $login\n";
		    next;
		}
		# Add to DB only if successful. 
		$PWDDB{$login} = "$uid:$serial";
	    }

	    #
	    # Skip ssh stuff if a local node or not updating (if the
	    # user did not exist, $doupdate will be true).
	    # 
	    if (!REMOTE() || !$doupdate) {
942 943
		next;
	    }
944 945 946 947 948 949 950 951 952

	    #
	    # Create .ssh dir and populate it with an authkeys file.
	    # Must ask for the current home dir since we rely on pw.conf.
	    #
	    my (undef,undef,undef,undef,
		undef,undef,undef,$homedir) = getpwuid($uid);
	    my $sshdir = "$homedir/.ssh";
	    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
953
	    if (! -e $sshdir) {
954 955 956 957 958 959 960 961
		if (! mkdir($sshdir, 0700)) {
		    warn("*** WARNING: Could not mkdir $sshdir: $!\n");
		    next;
		}
		if (!chown($uid, $gid, $sshdir)) {
		    warn("*** WARNING: Could not chown $sshdir: $!\n");
		    next;
		}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978
	    }
		
	    if (!open(AUTHKEYS, "> $sshdir/authorized_keys.new")) {
		warn("*** WARNING: Could not open $sshdir/keys.new: $!\n");
		next;
	    }
	    print AUTHKEYS "#\n";
	    print AUTHKEYS "# DO NOT EDIT! This file auto generated by ".
		"Emulab.Net account software.\n";
	    print AUTHKEYS "#\n";
	    print AUTHKEYS "# Please use the web interface to edit your ".
		"public key list.\n";
	    print AUTHKEYS "#\n";
	    foreach my $key (@{$pubkeys{$login}}) {
		print AUTHKEYS "$key\n";
	    }
	    close(AUTHKEYS);
979

Leigh B. Stoller's avatar
Leigh B. Stoller committed
980 981 982 983 984 985 986 987 988 989 990 991
	    if (!chown($uid, $gid, "$sshdir/authorized_keys.new")) {
		warn("*** WARNING: Could not chown $sshdir/keys: $!\n");
		next;
	    }
	    if (!chmod(0600, "$sshdir/authorized_keys.new")) {
		warn("*** WARNING: Could not chmod $sshdir/keys: $!\n");
		next;
	    }
	    if (-e "$sshdir/authorized_keys") {
		if (system("cp -p -f $sshdir/authorized_keys ".
			   "$sshdir/authorized_keys.old")) {
		    warn("*** Could not save off $sshdir/keys: $!\n");
992 993
		    next;
		}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
994 995 996 997 998
		if (!chown($uid, $gid, "$sshdir/authorized_keys.old")) {
		    warn("*** Could not chown $sshdir/oldkeys: $!\n");
		}
		if (!chmod(0600, "$sshdir/authorized_keys.old")) {
		    warn("*** Could not chmod $sshdir/oldkeys: $!\n");
999 1000
		}
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1001 1002 1003 1004
	    if (system("mv -f $sshdir/authorized_keys.new ".
		       "$sshdir/authorized_keys")) {
		warn("*** Could not mv $sshdir/keys: $!\n");
	    }
1005 1006 1007
	}
	else {
	    warn("*** Bad accounts line: $info\n");
1008 1009
	}
    }
1010 1011 1012
    # Write the DB back out!
    dbmclose(%PWDDB);

1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026
    return 0;
}

#
# RPM configuration. 
#
sub dorpms ()
{
    my @rpms = ();
    
    my $TM = OPENTMCC(TMCCCMD_RPM);
    while (<$TM>) {
	push(@rpms, $_);
    }
1027
    CLOSETMCC($TM);
1028 1029 1030 1031 1032 1033 1034 1035 1036 1037

    if (! @rpms) {
	return 0;
    }
    
    open(RPM, ">" . TMRPM)
	or die("Could not open " . TMRPM . ": $!");
    print RPM "#!/bin/sh\n";
    
    foreach my $rpm (@rpms) {
1038
	if ($rpm =~ /RPM=(.+)/) {
1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065
	    my $rpmline = os_rpminstall_line($1);
		    
	    print STDOUT "  $rpmline\n";
	    print RPM    "echo \"Installing RPM $1\"\n";
	    print RPM    "$rpmline\n";
	}
	else {
	    warn "*** WARNING: Bad RPMs line: $rpm";
	}
    }
    close(RPM);
    chmod(0755, TMRPM);

    return 0;
}

#
# TARBALL configuration. 
#
sub dotarballs ()
{
    my @tarballs = ();

    my $TM = OPENTMCC(TMCCCMD_TARBALL);
    while (<$TM>) {
	push(@tarballs, $_);
    }
1066
    CLOSETMCC($TM);
1067 1068 1069 1070 1071 1072 1073 1074 1075 1076

    if (! @tarballs) {
	return 0;
    }
    
    open(TARBALL, ">" . TMTARBALLS)
	or die("Could not open " . TMTARBALLS . ": $!");
    print TARBALL "#!/bin/sh\n";
    
    foreach my $tarball (@tarballs) {
1077
	if ($tarball =~ /DIR=(.+)\s+TARBALL=(.+)/) {
1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105
	    my $tbline = sprintf($TARINSTALL, $1, $2);
		    
	    print STDOUT  "  $tbline\n";
	    print TARBALL "echo \"Installing Tarball $2 in dir $1 \"\n";
	    print TARBALL "$tbline\n";
	}
	else {
	    warn "*** WARNING: Bad Tarballs line: $tarball";
	}
    }
    close(TARBALL);
    chmod(0755, TMTARBALLS);

    return 0;
}

#
# Experiment startup Command.
#
sub dostartupcmd ()
{
    my $startupcmd;
    
    my $TM = OPENTMCC(TMCCCMD_STARTUP);
    $_ = <$TM>;
    if (defined($_)) {
	$startupcmd = $_;
    }
1106
    CLOSETMCC($TM);
1107 1108 1109 1110 1111 1112 1113 1114

    if (! $startupcmd) {
	return 0;
    }
    
    open(RUN, ">" . TMSTARTUPCMD)
	or die("Could not open $TMSTARTUPCMD: $!");
    
1115
    if ($startupcmd =~ /CMD=(\'.+\') UID=([0-9a-z]+)/) {
1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128
	print  STDOUT "  Will run $1 as $2\n";
	print  RUN    "$startupcmd";
    }
    else {
	warn "*** WARNING: Bad startupcmd line: $startupcmd";
    }

    close(RUN);
    chmod(0755, TMSTARTUPCMD);

    return 0;
}

1129 1130 1131 1132 1133 1134
sub dotrafficconfig()
{
    my $didopen = 0;
    my $pat;
    my $TM;
    my $boss;
1135
    my $startnse = 0;
1136
    
1137 1138 1139 1140 1141 1142 1143 1144 1145
    #
    # Kinda ugly, but there is too much perl goo included by Socket to put it
    # on the MFS. 
    # 
    if (MFS()) {
	return 1;
    }
    require Socket;
    import Socket;
1146 1147
    
    $TM = OPENTMCC(TMCCCMD_BOSSINFO);
1148 1149 1150 1151 1152 1153 1154
    my $bossinfo = <$TM>;
    ($boss) = split(" ", $bossinfo);

    #
    # XXX hack: workaround for tmcc cmd failure inside TCL
    #     storing the output of a few tmcc commands in
    #     $SETUPDIR files for use by NSE
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1155 1156 1157 1158 1159 1160 1161
    #
    if (! REMOTE()) {
	open(BOSSINFCFG, ">$SETUPDIR/tmcc.bossinfo") or
	    die "Cannot open file $SETUPDIR/tmcc.bossinfo: $!";
	print BOSSINFCFG "$bossinfo";
	close(BOSSINFCFG);
    }
1162

1163
    CLOSETMCC($TM);
1164 1165 1166 1167 1168 1169
    my ($pid, $eid, $vname) = check_status();

    my $cmdline = "$SETUPDIR/trafgen -s $boss";
    if ($pid) {
	$cmdline .= " -E $pid/$eid";
    }
1170

1171 1172 1173 1174 1175
    #
    # XXX hack: workaround for tmcc cmd failure inside TCL
    #     storing the output of a few tmcc commands in
    #     $SETUPDIR files for use by NSE
    #
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191
    if (! REMOTE()) {
	my $record_sep;

	$record_sep = $/;
	undef($/);
	$TM = OPENTMCC(TMCCCMD_IFC);
	open(IFCFG, ">$SETUPDIR/tmcc.ifconfig") or
	    die "Cannot open file $SETUPDIR/tmcc.ifconfig: $!";
	print IFCFG <$TM>;
	close(IFCFG);
	CLOSETMCC($TM);
	$/ = $record_sep;
	
	open(TRAFCFG, ">$SETUPDIR/tmcc.trafgens") or
	    die "Cannot open file $SETUPDIR/tmcc.trafgens: $!";    
    }
1192

1193 1194
    $TM = OPENTMCC(TMCCCMD_TRAFFIC);

1195
    $pat  = q(TRAFGEN=([-\w.]+) MYNAME=([-\w.]+) MYPORT=(\d+) );
1196
    $pat .= q(PEERNAME=([-\w.]+) PEERPORT=(\d+) );
1197
    $pat .= q(PROTO=(\w+) ROLE=(\w+) GENERATOR=(\w+));
1198 1199

    while (<$TM>) {
1200

Leigh B. Stoller's avatar
Leigh B. Stoller committed
1201 1202 1203
	if (! REMOTE()) {
	    print TRAFCFG "$_";
	}
1204 1205 1206
	if ($_ =~ /$pat/) {
	    #
	    # The following is specific to the modified TG traffic generator:
1207 1208 1209 1210 1211
	    #
	    #  trafgen [-s serverip] [-p serverport] [-l logfile] \
	    #	     [ -N name ] [-P proto] [-R role] [ -E pid/eid ] \
	    #	     [ -S srcip.srcport ] [ -T targetip.targetport ]
	    #
1212 1213
	    # N.B. serverport is not needed right now
	    #
1214 1215 1216 1217 1218 1219 1220 1221
	    my $name = $1;
	    my $ownaddr = inet_ntoa(my $ipaddr = gethostbyname($2));
	    my $ownport = $3;
	    my $peeraddr = inet_ntoa($ipaddr = gethostbyname($4));
	    my $peerport = $5;
	    my $proto = $6;
	    my $role = $7;
	    my $generator = $8;
1222
	    my $target;
1223
	    my $source;
1224

1225 1226 1227
	    # Skip if not specified as a TG generator. At some point
	    # work in Shashi's NSE work.
	    if ($generator ne "TG") {
1228 1229 1230 1231 1232 1233 1234
		$startnse = 1;
		if (! $didopen) {
		    open(RC, ">" . TMTRAFFICCONFIG)
			or die("Could not open " . TMTRAFFICCONFIG . ": $!");
		    print RC "#!/bin/sh\n";
		    $didopen = 1;
		}
1235 1236 1237
		next;
	    }

1238 1239
	    if ($role eq "sink") {
		$target = "$ownaddr.$ownport";
1240
		$source = "$peeraddr.$peerport";
1241 1242 1243
	    }
	    else {
		$target = "$peeraddr.$peerport";
1244
		$source = "$ownaddr.$ownport";
1245 1246 1247 1248 1249 1250 1251 1252
	    }

	    if (! $didopen) {
		open(RC, ">" . TMTRAFFICCONFIG)
		    or die("Could not open " . TMTRAFFICCONFIG . ": $!");
		print RC "#!/bin/sh\n";
		$didopen = 1;
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1253 1254
	    print RC "$cmdline -N $name -S $source -T $target -P $proto ".
		"-R $role >/tmp/${name}-${pid}-${eid}.debug 2>&1 &\n";
1255 1256 1257 1258 1259
	}
	else {
	    warn "*** WARNING: Bad traffic line: $_";
	}
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1260 1261 1262
    if (! REMOTE()) {
	close(TRAFCFG);
    }
1263 1264 1265 1266

    if( $startnse ) {
	print RC "$SETUPDIR/startnse &\n";
    }
1267
    CLOSETMCC($TM);
1268

1269 1270 1271 1272
    #
    # XXX hack: workaround for tmcc cmd failure inside TCL
    #     storing the output of a few tmcc commands in
    #     $SETUPDIR files for use by NSE
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285
    #
    if (! REMOTE()) {
	open(NSECFG, ">$SETUPDIR/tmcc.nseconfigs") or
	    die "Cannot open file $SETUPDIR/tmcc.nseconfigs: $!";
	$TM = OPENTMCC(TMCCCMD_NSECONFIGS);
	$record_sep = $/;
	undef($/);
	my $nseconfig = <$TM>;
	$/ = $record_sep;
	print NSECFG $nseconfig;
	CLOSETMCC($TM);
	close(NSECFG);
    }
1286
	    
1287 1288
    # XXX hack: need a separate section for starting up NSE when we
    #           support simulated nodes
1289
    if( ! $startnse ) {
1290 1291 1292
	
	if( $nseconfig ) {

1293
	    # start NSE if 'tmcc nseconfigs' is not empty
1294 1295 1296 1297 1298