Experiment.pm.in 109 KB
Newer Older
1 2 3
#!/usr/bin/perl -wT
#
# EMULAB-COPYRIGHT
4
# Copyright (c) 2005-2009 University of Utah and the Flux Group.
5 6 7 8 9 10 11 12 13 14 15 16 17
# All rights reserved.
#
package Experiment;

use strict;
use Exporter;
use vars qw(@ISA @EXPORT);

@ISA    = "Exporter";
@EXPORT = qw ( );

use libdb;
use libtestbed;
18
use User;
19 20
use Project;
use Group;
21
use Node;
22
use Interface;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23
use VirtExperiment;
24
use Logfile;
25 26
use English;
use Data::Dumper;
27
use File::Basename;
28
use overload ('""' => 'Stringify');
29
use libtblog_simple;
30

31
use vars qw($EXPT_PRELOAD $EXPT_START $EXPT_SWAPIN $EXPT_SWAPUPDATE
32
	    $EXPT_SWAPOUT $EXPT_SWAPMOD %physicalTables @virtualTables
33 34
	    $EXPT_FLAGS_NAMESONLY $EXPT_FLAGS_INCLUDEVIRT
	    $EXPT_FLAGS_LOCALONLY 
35 36
	    @EXPORT_OK);

37 38 39
# Configure variables
my $TB		= "@prefix@";
my $BOSSNODE    = "@BOSSNODE@";
40
my $CONTROL	= "@USERNODE@";
41 42
my $TBOPS       = "@TBOPSEMAIL@";
my $PROJROOT    = "@PROJROOT_DIR@";
43
my $EVENTSYS    = @EVENTSYS@;
44
my $STAMPS      = @STAMPS@;
45
my $TBBASE      = "@TBBASE@";
46 47 48 49 50 51 52 53
my $TEVC	= "$TB/bin/tevc";
my $DBCONTROL   = "$TB/sbin/opsdb_control";
my $RSYNC	= "/usr/local/bin/rsync";
my $MKEXPDIR    = "$TB/libexec/mkexpdir";
my $TBPRERUN    = "$TB/bin/tbprerun";
my $TBSWAP      = "$TB/bin/tbswap";
my $TBREPORT    = "$TB/bin/tbreport";
my $TBEND       = "$TB/bin/tbend";
54
my $DU          = "/usr/bin/du";
55
my $MD5         = "/sbin/md5";
56

57 58 59 60 61 62
# Swap Actions
$EXPT_PRELOAD		= TBDB_STATS_PRELOAD();
$EXPT_START		= TBDB_STATS_START();
$EXPT_SWAPIN		= TBDB_STATS_SWAPIN();
$EXPT_SWAPOUT		= TBDB_STATS_SWAPOUT();
$EXPT_SWAPMOD		= TBDB_STATS_SWAPMODIFY();
63
$EXPT_SWAPUPDATE	= TBDB_STATS_SWAPUPDATE();
64

65 66 67 68 69
# Other flags.
$EXPT_FLAGS_LOCALONLY   = 0x01;
$EXPT_FLAGS_NAMESONLY   = 0x02;
$EXPT_FLAGS_INCLUDEVIRT = 0x04;

70 71
# For stats gathering code.
my $EXPT_STARTCLOCK;
72
my $EXPT_RESOURCESHOSED = 0;
73 74

# Why, why, why?
75 76
@EXPORT_OK = qw($EXPT_PRELOAD $EXPT_START $EXPT_SWAPUPDATE
		$EXPT_SWAPIN $EXPT_SWAPOUT $EXPT_SWAPMOD
77
		%physicalTables  @virtualTables);
78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

#
# List of tables used for experiment removal/backup/restore.
#
@virtualTables  = ("virt_nodes",
		   "virt_lans",
		   "virt_lan_lans",
		   "virt_lan_settings",
		   "virt_lan_member_settings",
		   "virt_trafgens",
		   "virt_agents",
		   "virt_routes",
		   "virt_vtypes",
		   "virt_programs",
		   "virt_node_desires",
		   "virt_node_startloc",
		   "virt_simnode_attributes",
		   "virt_user_environment",
		   "virt_parameters",
		   # vis_nodes is locked during update in prerender, so we
		   # will get a consistent dataset when we backup.
		   "vis_nodes",
		   "vis_graphs",
		   "nseconfigs",
		   "eventlist",
		   "event_groups",
		   "virt_firewalls",
		   "firewall_rules",
		   "virt_tiptunnels",
		   "ipsubnets");

109 110 111 112
%physicalTables = ("delays"     => ["node_id", "vname", "vnode0", "vnode1"],
		   "ipport_ranges" => undef,
		   "v2pmap"        => ["node_id", "vname"],
		   "linkdelays"    => ["node_id", "vlan", "vnode"],
113
		   "traces"        => ["node_id", "idx"],
114
		   "portmap"       => undef); 
115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144

# These are slots in the node table that need to be restored. 
my @nodetable_fields = ("def_boot_osid",
			"def_boot_path",
			"def_boot_cmd_line",
			"temp_boot_osid",
			"next_boot_osid",
			"next_boot_path",
			"next_boot_cmd_line",
			"pxe_boot_path",
			"bootstatus",
			"ready",
			"rpms",
			"deltas",
			"tarballs",
			"startupcmd",
			"startstatus",
			"failureaction",
			"routertype",
			"op_mode",
			"op_mode_timestamp",
			"allocstate",
			"allocstate_timestamp",
			"next_op_mode",
			"osid",
			"ipport_low",
			"ipport_next",
			"ipport_high",
			"sshdport",
			"rtabid");
145

146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
# Hmm, this is silly. 
if ($EVENTSYS) {
    require event;
    import event;
}

# Cache of instances to avoid regenerating them.
my %experiments   = ();
my $debug	  = 0;

# Little helper and debug function.
sub mysystem($)
{
    my ($command) = @_;

161
    my $cwd;
162
    chomp($cwd = `/bin/pwd`);
163 164

    print STDERR "Running '$command' in $cwd\n"
165 166 167 168 169 170 171
	if ($debug);
    return system($command);
}

#
# Lookup an experiment and create a class instance to return.
#
172
sub Lookup($$;$)
173
{
174 175 176 177 178 179 180 181 182 183 184 185 186 187 188
    my ($class, $arg1, $arg2) = @_;
    my $idx;

    #
    # A single arg is either an index or a "pid,eid" or "pid/eid" string.
    #
    if (!defined($arg2)) {
	if ($arg1 =~ /^(\d*)$/) {
	    $idx = $1;
	}
	elsif ($arg1 =~ /^([-\w]*),([-\w]*)$/ ||
	       $arg1 =~ /^([-\w]*)\/([-\w]*)$/) {
	    $arg1 = $1;
	    $arg2 = $2;
	}
189 190 191 192 193 194 195 196 197 198
	elsif ($arg1 =~ /^\w+\-\w+\-\w+\-\w+\-\w+$/) {
	    my $result =
		DBQueryWarn("select idx from experiments ".
			    "where eid_uuid='$arg1'");

	    return undef
		if (! $result || !$result->numrows);

	    ($idx) = $result->fetchrow_array();
	}
199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
	else {
	    return undef;
	}
    }
    elsif (! (($arg1 =~ /^[-\w]*$/) && ($arg2 =~ /^[-\w]*$/))) {
	return undef;
    }

    #
    # Two args means lookup by pid,eid instead of exptidx.
    #
    if (defined($arg2)) {
	my $result =
	    DBQueryWarn("select idx from experiments ".
			"where pid='$arg1' and eid='$arg2'");

	return undef
	    if (! $result || !$result->numrows);

	($idx) = $result->fetchrow_array();
    }
220 221

    # Look in cache first
222 223
    return $experiments{"$idx"}
        if (exists($experiments{"$idx"}));
224 225
    
    my $query_result =
226 227 228
	DBQueryWarn("select e.*,i.parent_guid,t.guid from experiments as e ".
		    "left join experiment_templates as t on ".
		    "     t.exptidx=e.idx ".
229 230 231
		    "left join experiment_template_instances as i on ".
		    "     i.exptidx=e.idx ".
		    "where e.idx='$idx'");
232 233 234 235 236 237

    return undef
	if (!$query_result || !$query_result->numrows);

    my $self         = {};
    $self->{'EXPT'}  = $query_result->fetchrow_hashref();
238 239
    # An Instance?
    $self->{'ISINSTANCE'} = defined($self->{'EXPT'}->{'parent_guid'});
240 241
    # The experiment underlying a template.
    $self->{'ISTEMPLATE'} = defined($self->{'EXPT'}->{'guid'});
242 243 244 245 246 247 248 249 250

    $query_result =
	DBQueryWarn("select * from experiment_stats where exptidx='$idx'");
	
    return undef
	if (!$query_result || !$query_result->numrows);
    
    $self->{'STATS'} = $query_result->fetchrow_hashref();
    
251 252 253 254 255 256
    my $rsrcidx = $self->{'STATS'}->{'rsrcidx'};

    $query_result =
	DBQueryWarn("select * from experiment_resources ".
		    "where idx='$rsrcidx'");
	
Leigh B. Stoller's avatar
Leigh B. Stoller committed
257
    return undef
258 259 260
	if (!$query_result || !$query_result->numrows);
    
    $self->{'RSRC'} = $query_result->fetchrow_hashref();
261

262 263 264
    # Virt Experiment; load lazy.
    $self->{'VIRTEXPT'} = undef;

265 266 267
    bless($self, $class);
    
    # Add to cache. 
268
    $experiments{"$idx"} = $self;
269 270 271 272
    
    return $self;
}
# accessors
273 274 275
sub field($$)     { return ((! ref($_[0])) ? -1 : $_[0]->{'EXPT'}->{$_[1]}); }
sub stats($$)     { return ((! ref($_[0])) ? -1 : $_[0]->{'STATS'}->{$_[1]});}
sub resources($$) { return ((! ref($_[0])) ? -1 : $_[0]->{'RSRC'}->{$_[1]}); }
276
sub dbrow($$)     { return $_[0]->{'EXPT'}; }
277

278 279 280 281 282 283
sub pid($)		{ return field($_[0], 'pid'); }
sub gid($)		{ return field($_[0], 'gid'); }
sub pid_idx($)		{ return field($_[0], 'pid_idx'); }
sub gid_idx($)		{ return field($_[0], 'gid_idx'); }
sub eid($)		{ return field($_[0], 'eid'); }
sub idx($)		{ return field($_[0], 'idx'); }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
284 285
sub uuid($)		{ return field($_[0], 'eid_uuid'); }
sub eid_uuid($)		{ return field($_[0], 'eid_uuid'); }
286
sub description($)	{ return field($_[0], 'expt_name'); }
287 288 289 290 291
sub path($)		{ return field($_[0], 'path'); }
sub state($)		{ return field($_[0], 'state'); }
sub batchstate($)	{ return field($_[0], 'batchstate'); }
sub batchmode($)	{ return field($_[0], 'batchmode'); }
sub rsrcidx($)		{ return stats($_[0], 'rsrcidx'); }
292
sub lastrsrc($)		{ return stats($_[0], 'lastrsrc'); }
293 294 295 296 297 298 299
sub creator($)		{ return field($_[0], 'expt_head_uid');}
sub canceled($)		{ return field($_[0], 'canceled'); }
sub locked($)		{ return field($_[0], 'expt_locked'); }
sub elabinelab($)	{ return field($_[0], 'elab_in_elab');}
sub elabinelab_eid($)   { return field($_[0], 'elabinelab_eid');}
sub elabinelab_exptidx($){return field($_[0], 'elabinelab_exptidx');}
sub lockdown($)		{ return field($_[0], 'lockdown'); }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
300
sub geniflags($)	{ return field($_[0], 'geniflags'); }
301 302 303 304 305 306
sub created($)		{ return field($_[0], 'expt_created'); }
sub swapper($)		{ return field($_[0], 'expt_swap_uid');}
sub swappable($)	{ return field($_[0], 'swappable');}
sub idleswap($)		{ return field($_[0], 'idleswap');}
sub autoswap($)		{ return field($_[0], 'autoswap');}
sub noswap_reason($)	{ return field($_[0], 'noswap_reason');}
307 308 309 310
sub noidleswap_reason($){ return field($_[0], 'noidleswap_reason');}
sub idleswap_timeout($) { return field($_[0], 'idleswap_timeout');}
sub autoswap_timeout($) { return field($_[0], 'autoswap_timeout');}
sub prerender_pid($)    { return field($_[0], 'prerender_pid');}
311 312
sub dpdb($)		{ return field($_[0], 'dpdb');}
sub dpdbname($)         { return field($_[0], 'dpdbname');}
313
sub dpdbpassword($)     { return field($_[0], 'dpdbpassword');}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
314
sub instance_idx($)     { return field($_[0], 'instance_idx'); }
315 316
sub creator_idx($)      { return field($_[0], 'creator_idx');}
sub swapper_idx($)      { return field($_[0], 'swapper_idx');}
317 318 319
sub use_ipassign($)     { return field($_[0], 'use_ipassign');}
sub ipassign_args($)    { return field($_[0], 'ipassign_args');}
sub security_level($)   { return field($_[0], 'security_level');}
320 321
sub linktest_pid($)     { return field($_[0], 'linktest_pid');}
sub linktest_level($)   { return field($_[0], 'linktest_level');}
322
sub logfile($)          { return field($_[0], 'logfile');}
323
sub paniced($)          { return field($_[0], 'paniced');}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
324 325 326 327
sub cpu_usage($)        { return field($_[0], 'cpu_usage');}
sub encap_style($)      { return field($_[0], 'encap_style');}
sub multiplex_factor($) { return field($_[0], 'multiplex_factor');}
sub delay_capacity($)   { return field($_[0], 'delay_capacity');}
328
sub virtnode_count($)   { return field($_[0], 'virtnode_count');}
329
sub archive_idx($)	{ return stats($_[0], 'archive_idx'); }
330 331
sub swapin_count($)	{ return stats($_[0], 'swapin_count'); }
sub destroyed($)	{ return stats($_[0], 'destroyed'); }
332
sub archive_tag($)	{ return resources($_[0], 'archive_tag'); }
333 334 335 336
sub thumbnail($)	{ return resources($_[0], 'thumbnail'); }
sub swapin_time($)	{ return resources($_[0], 'swapin_time'); }
sub swapout_time($)	{ return resources($_[0], 'swapout_time'); }
sub lastidx($)	        { return resources($_[0], 'lastidx'); }
337
sub input_data_idx($)   { return resources($_[0], 'input_data_idx'); }
338 339

#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
340
# Lookup an experiment given an experiment index.
341 342 343 344 345
#
sub LookupByIndex($$)
{
    my ($class, $exptidx) = @_;

346
    return Experiment->Lookup($exptidx);
347 348
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
349 350 351 352 353 354 355 356 357 358 359 360 361 362
#
# Equality test. Not strictly necessary in perl, but good form.
#
sub SameExperiment($$)
{
    my ($self, $other) = @_;

    # Must be a real reference. 
    return -1
	if (! (ref($self) && ref($other)));

    return $self->idx() == $other->idx();
}

363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384
#
# All active experiments.
#
sub AllActive($)
{
    my ($class) = @_;
    my @result  = ();
    
    my $query_result =
	DBQueryFatal("select idx from experiments where state='active'");

    while (my ($idx) = $query_result->fetchrow_array()) {
	my $experiment = Experiment->Lookup($idx);

	if (!defined($experiment)) {
	    print STDERR "Experiment::AllActive: No object for $idx!\n";
	}
	push(@result, $experiment);
    }
    return @result;
}

385 386 387 388 389 390 391 392 393 394 395
#
# All experiments for a particular user. Class method.
#
sub UserExperimentList($$$)
{
    my ($class, $user, $plist) = @_;
    my @result  = ();
    my $uid_idx = $user->uid_idx();
    
    my $query_result =
	DBQueryWarn("select idx from experiments ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
396 397
		    "where creator_idx='$uid_idx' or ".
		    "      (swapper_idx='$uid_idx' and ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
398
		    "       state!='" . EXPTSTATE_SWAPPED() . "')");
399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415
    return -1
	if (! $query_result);

    while (my ($idx) = $query_result->fetchrow_array()) {
	my $experiment = Experiment->Lookup($idx);

	if (!defined($experiment)) {
	    print STDERR "Experiment::UserExperimentList: ".
		"No object for $idx!\n";
	    return -1;
	}
	push(@result, $experiment);
    }
    @$plist = @result;
    return 0;
}

416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431
# This is needed a lot.
sub unix_gid($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $group = $self->GetGroup();
    return -1
	if (!defined($group));

    return $group->unix_gid();
}

432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447
#
# LockTables simple locks the given tables, and then refreshes the
# experiment instance (thereby getting the data from the DB after
# the tables are locked).
#
sub LockTables($;$)
{
    my ($self, $spec) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    $spec  = "experiments write"
	if (!defined($spec));
    $spec .= ", experiment_stats read";
448
    $spec .= ", experiment_resources read";
449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467
    
    DBQueryWarn("lock tables $spec")
	or return -1;
	
    return $self->Refresh();
}
sub UnLockTables($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    DBQueryWarn("unlock tables")
	or return -1;
    return 0;
}

468 469 470 471 472 473
#
# Create a new experiment. This installs the new record in the DB,
# and returns an instance. There is some bookkeeping along the way.
#
sub Create($$$$)
{
474
    my ($class, $group, $eid, $argref) = @_;
475
    my $exptidx;
476
    my $uuid;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
477
    my $now = time();
478 479

    return undef
480 481 482 483 484 485
	if (ref($class) || !ref($group));

    my $pid     = $group->pid();
    my $gid     = $group->gid();
    my $pid_idx = $group->pid_idx();
    my $gid_idx = $group->gid_idx();
486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577

    #
    # The pid/eid has to be unique, so lock the table for the check/insert.
    #
    DBQueryWarn("lock tables experiments write, ".
		"            experiment_stats write, ".
		"            experiment_resources write, ".
		"            emulab_indicies write, ".
		"            testbed_stats read")
	or return undef;

    my $query_result =
	DBQueryWarn("select pid,eid from experiments ".
		    "where eid='$eid' and pid='$pid'");

    if ($query_result->numrows) {
	DBQueryWarn("unlock tables");
	tberror("Experiment $eid in project $pid already exists!");
	return undef;
    }

    #
    # Grab the next highest index to use. We used to use an auto_increment
    # field in the table, but if the DB is ever "dropped" and recreated,
    # it will reuse indicies that are crossed referenced in the other two
    # tables.
    #
    $query_result = 
	DBQueryWarn("select idx from emulab_indicies ".
		    "where name='next_exptidx'");

    if (!$query_result) {
	DBQueryWarn("unlock tables");
	return undef;
    }

    # Seed with a proper value.
    if (! $query_result->num_rows) {
	$query_result =
	    DBQueryWarn("select MAX(exptidx) + 1 from experiment_stats");

	if (!$query_result) {
	    DBQueryWarn("unlock tables");
	    return undef;
	}
	($exptidx) = $query_result->fetchrow_array();

	# First ever experiment!
	$exptidx = 1
	    if (!defined($exptidx));

	if (! DBQueryWarn("insert into emulab_indicies (name, idx) ".
			  "values ('next_exptidx', $exptidx)")) {
	    DBQueryWarn("unlock tables");
	    return undef;
	}

    }
    else {
	($exptidx) = $query_result->fetchrow_array();
    }
    my $nextidx = $exptidx + 1;
    
    if (! DBQueryWarn("update emulab_indicies set idx='$nextidx' ".
		      "where name='next_exptidx'")) {
	DBQueryWarn("unlock tables");
	return undef;
    }

    #
    # Lets be really sure!
    #
    foreach my $table ("experiments", "experiment_stats",
		       "experiment_resources", "testbed_stats") {

	my $slot = (($table eq "experiments") ? "idx" : "exptidx");
	
	$query_result =
	    DBQueryWarn("select * from $table where ${slot}=$exptidx");

	if (! $query_result) {
	    DBQueryWarn("unlock tables");
	    return undef;
	}
	if ($query_result->numrows) {
	    DBQueryWarn("unlock tables");
	    tberror("Experiment index $exptidx exists in $table; ".
		    "this is bad!");
	    return undef;
	}
    }

578
    # And a UUID (universally unique identifier).
579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595
    if (exists($argref->{'eid_uuid'})) {
	$uuid = $argref->{'eid_uuid'};
	delete($argref->{'eid_uuid'});

	if (! ($uuid =~ /^\w+\-\w+\-\w+\-\w+\-\w+$/)) {
	    DBQueryWarn("unlock tables");
	    print "*** WARNING: Bad format in UUID!\n";
	    return undef;
	}
    }
    else {
	$uuid = NewUUID();
	if (!defined($uuid)) {
	    DBQueryWarn("unlock tables");
	    print "*** WARNING: Could not generate a UUID!\n";
	    return undef;
	}
596 597
    }

598 599 600 601
    #
    # Lets be real sure that the UUID is really unique.
    #
    $query_result =
602
	DBQueryWarn("select pid,eid from experiments ".
603 604 605 606 607 608 609 610 611 612 613 614
		    "where eid_uuid='$uuid'");
    if (! $query_result) {
	DBQueryWarn("unlock tables");
	return undef;
    }
    if ($query_result->numrows) {
	DBQueryWarn("unlock tables");
	tberror("Experiment uuid $uuid already exists; ".
		"this is bad!");
	return undef;
    }

615 616 617 618 619 620 621 622 623 624 625 626
    #
    # Insert the record. This reserves the pid/eid for us. 
    #
    # Some fields special cause of quoting.
    #
    my $description = DBQuoteSpecial($argref->{'expt_name'});
    delete($argref->{'expt_name'});
    my $noswap_reason = DBQuoteSpecial($argref->{'noswap_reason'});
    delete($argref->{'noswap_reason'});
    my $noidleswap_reason = DBQuoteSpecial($argref->{'noidleswap_reason'});
    delete($argref->{'noidleswap_reason'});

Leigh B. Stoller's avatar
Leigh B. Stoller committed
627 628 629 630
    # we override this below
    delete($argref->{'idx'})
	if (exists($argref->{'idx'}));

631 632 633 634
    my $query = "insert into experiments set ".
	join(",", map("$_='" . $argref->{$_} . "'", keys(%{$argref})));

    # Append the rest
Leigh B. Stoller's avatar
Leigh B. Stoller committed
635
    $query .= ",expt_created=FROM_UNIXTIME('$now')";
636
    $query .= ",expt_locked=now(),pid='$pid',eid='$eid',eid_uuid='$uuid'";
637
    $query .= ",pid_idx='$pid_idx',gid='$gid',gid_idx='$gid_idx'";
638 639 640
    $query .= ",expt_name=$description";
    $query .= ",noswap_reason=$noswap_reason";
    $query .= ",noidleswap_reason=$noidleswap_reason";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
641
    $query .= ",idx=$exptidx";
642 643 644 645 646 647 648

    if (! DBQueryWarn($query)) {
	DBQueryWarn("unlock tables");
	tberror("Error inserting experiment record for $pid/$eid!");	
	return undef;
    }

649 650 651 652
    my $creator_uid = $argref->{'expt_head_uid'};
    my $creator_idx = $argref->{'creator_idx'};
    my $batchmode   = $argref->{'batchmode'};

653 654 655 656
    #
    # Create an experiment_resources record for the above record.
    #
    $query_result =
657 658 659
	DBQueryWarn("insert into experiment_resources ".
		    "(tstamp, exptidx, uid_idx) ".
		    "values (FROM_UNIXTIME('$now'), $exptidx, $creator_idx)");
660 661 662 663 664 665 666

    if (!$query_result) {
	DBQueryWarn("delete from experiments where pid='$pid' and eid='$eid'");
	DBQueryWarn("unlock tables");
	tberror("Error inserting experiment resources record for $pid/$eid!");
	return undef;
    }
667
    my $rsrcidx     = $query_result->insertid;
668
    
669 670 671 672
    #
    # Now create an experiment_stats record to match.
    #
    if (! DBQueryWarn("insert into experiment_stats ".
673
		      "(eid, pid, creator, creator_idx, gid, created, ".
674 675
		      " batch, exptidx, rsrcidx, pid_idx, gid_idx, eid_uuid, ".
		      " last_activity) ".
676 677
		      "values('$eid', '$pid', '$creator_uid', '$creator_idx',".
		      "       '$gid', FROM_UNIXTIME('$now'), ".
678
		      "        $batchmode, $exptidx, $rsrcidx, ".
679 680
		      "        $pid_idx, $gid_idx, '$uuid', ".
		      "        FROM_UNIXTIME('$now'))")) {
681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712
	DBQueryWarn("delete from experiments where pid='$pid' and eid='$eid'");
	DBQueryWarn("delete from experiment_resources where idx=$rsrcidx");
	DBQueryWarn("unlock tables");
	tberror("Error inserting experiment stats record for $pid/$eid!");
	return undef;
    }

    #
    # Safe to unlock; all tables consistent.
    #
    if (! DBQueryWarn("unlock tables")) {
	DBQueryWarn("delete from experiments where pid='$pid' and eid='$eid'");
	DBQueryWarn("delete from experiment_resources where idx=$rsrcidx");
	DBQueryWarn("delete from experiment_stats where exptidx=$exptidx");
	tberror("Error unlocking tables!");
	return undef
    }

    return Experiment->Lookup($pid, $eid);
}

#
# Delete experiment. Optional purge argument says to remove all trace
# (typically, the stats are kept).
#
sub Delete($;$)
{
    my ($self, $purge) = @_;

    return -1
	if (! ref($self));

713 714 715
    my $pid     = $self->pid();
    my $eid     = $self->eid();
    my $exptidx = $self->idx();
716 717
    my $workdir = $self->WorkDir();
    my $userdir = $self->UserDir();
718 719 720 721

    $purge = 0
	if (!defined($purge));

722 723
    $self->UnBindNonLocalUsers();

724 725 726 727 728 729 730 731 732 733 734
    #
    # Try to remove experiment directory. We allow for it not being there
    # cause we often run the tb programs directly. We also allow for not
    # having permission, in the case that an admin type is running this,
    # in which case it won't be allowed cause of directory permissions. Thats
    # okay since admin types should rarely end experiments in other projects.
    #
    print "Removing experiment directories ... \n";
    if (defined($userdir) && system("/bin/rm -rf $userdir")) {
	print "*** WARNING: Not able to remove $userdir\n";
	print "             Someone will need to do this by hand.\n";
735

736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752
	# NFS errors usually the result. Sometimes its cause there is
	# someone in the directory, so its being held open.
        libtestbed::SENDMAIL($TBOPS,
			     "Experiment::Delete: Could not remove directory",
			     "Could not remove $userdir.\n".
			     "Someone will need to do this by hand.\n");
    }
    if (system("/bin/rm -rf $workdir")) {
	print "*** WARNING: Not able to remove $workdir\n";
	print "             Someone will need to do this by hand.\n";
    }
    # Yuck.
    if ($pid ne $self->gid()) {
	my $eidlink = "$PROJROOT/$pid/exp/$eid";
	unlink($eidlink)
	    if (-l $eidlink);
    }
753 754 755 756
    my $logfile = $self->GetLogFile();
    if (defined($logfile)) {
	$logfile->Delete();
    }
757 758 759 760
    libArchive::TBDeleteExperimentArchive($pid, $eid);

    DBQueryWarn("DELETE from experiments ".
		"WHERE eid='$eid' and pid='$pid'");
761

762 763 764
    # Delete from cache. 
    delete($experiments{"$exptidx"});

765 766 767 768 769 770 771 772 773
    #
    # Mark experiment destroyed. This is a backup to End() below.
    #
    if (! defined($self->destroyed())) {
	DBQueryWarn("update experiment_stats set ".
		    "   destroyed=now() ".
		    "where exptidx=$exptidx");
	$self->Refresh();
    }
774
    return 0
775 776 777
	if (! $purge);
    
    #
778
    # Now we can clean up the stats and resource records. 
779 780
    #
    my $rsrcidx = $self->rsrcidx();
781 782 783 784 785 786 787

    $self->DeleteInputFiles();

    DBQueryWarn("DELETE from experiment_pmapping ".
		"WHERE rsrcidx=$rsrcidx")
	if (defined($rsrcidx) && $rsrcidx);

788
    DBQueryWarn("DELETE from experiment_resources ".
789
		"WHERE idx=$rsrcidx")
Leigh B. Stoller's avatar
Leigh B. Stoller committed
790
	if (defined($rsrcidx) && $rsrcidx);
791

792 793 794 795 796 797 798 799 800 801
    DBQueryWarn("DELETE from testbed_stats ".
		"WHERE exptidx=$exptidx");

    # This must be last cause it provides the unique exptidx above.
    DBQueryWarn("DELETE from experiment_stats ".
		"WHERE eid='$eid' and pid='$pid' and exptidx=$exptidx");

    return 0;
}

802 803 804 805 806 807 808 809 810
#
# Flush from our little cache, as for the expire daemon.
#
sub Flush($)
{
    my ($self) = @_;

    delete($experiments{$self->idx()});
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
811 812 813 814 815 816
sub FlushAll($)
{
    my ($class) = @_;

    %experiments = ();
}
817

818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902
#
# Add an input file to the template. The point of this is to reduce
# duplication by taking an md5 of the input file, and sharing that
# record/file.
# 
sub AddInputFile($$;$)
{
    my ($self, $inputfile, $isnsfile) = @_;
    my $input_data_idx;
    my $isnew = 0;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    $isnsfile = 0
	if (! defined($isnsfile));

    return -1
	if (! -r $inputfile);

    my $data_string = `cat $inputfile`;
    return -1
	if ($?);

    my $exptidx  = $self->idx();
    my $rsrcidx  = $self->rsrcidx();

    if ($data_string) {
	# As you can see, we md5 the raw data.
	$data_string = DBQuoteSpecial($data_string);
	if (length($data_string) >= DBLIMIT_NSFILESIZE()) {
	    tberror("Input file is too big (> " . DBLIMIT_NSFILESIZE() . ")!");
	    return -1;
	}

	#
	# Grab an MD5 of the file to see if we already have a copy of it.
	# Avoids needless duplication.
	#
	my $md5 = `$MD5 -q $inputfile`;
	chomp($md5);

	DBQueryWarn("lock tables experiment_input_data write, ".
		    "            experiment_inputs write, ".
		    "            experiment_resources write")
	    or return -1;

	my $query_result =
	    DBQueryWarn("select idx from experiment_input_data ".
			"where md5='$md5'");

	if (!$query_result) {
	    DBQueryWarn("unlock tables");
	    return -1;
	}

	if ($query_result->numrows) {
	    ($input_data_idx) = $query_result->fetchrow_array();
	    $isnew = 0;
	}
	else {
	    $query_result =
		DBQueryWarn("insert into experiment_input_data ".
			    "(idx, md5, input) ".
			    "values (NULL, '$md5', $data_string)");
	    
	    if (!$query_result) {
		DBQueryWarn("unlock tables");
		return -1;
	    }
	    $input_data_idx = $query_result->insertid;
	    $isnew = 1;
	}
	if (! DBQueryWarn("insert into experiment_inputs ".
			  " (rsrcidx, exptidx, input_data_idx) values ".
			  " ($rsrcidx, $exptidx, '$input_data_idx')")) {
	    DBQueryWarn("delete from experiment_input_data ".
			"where idx='$input_data_idx'")
		if ($isnew);
	    DBQueryWarn("unlock tables");
	    return -1;
	}
	if ($isnsfile &&
	    $self->TableUpdate("experiment_resources",
903
			       "input_data_idx='$input_data_idx'",
Leigh B. Stoller's avatar
Leigh B. Stoller committed
904
			       "idx='$rsrcidx'") != 0) {
905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959
	    DBQueryWarn("unlock tables");
	    return -1;
	}
	DBQueryWarn("unlock tables");
    }
    return 0;
}

#
# Delete the input files, but only if not in use.
#
sub DeleteInputFiles($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $rsrcidx = $self->rsrcidx();
    my $nsidx   = $self->input_data_idx();

    DBQueryWarn("lock tables experiment_input_data write, ".
		"            experiment_resources write, ".
		"            experiment_inputs write")
	or return -1;

    #
    # Get all input files for this rsrc record.
    #
    my $query_result =
	DBQueryWarn("select input_data_idx from experiment_inputs ".
		    "where rsrcidx='$rsrcidx'");
    goto bad
	if (! $query_result);
    goto done
	if (! $query_result->numrows);

    while (my ($input_data_idx) = $query_result->fetchrow_array()) {
	#
	# Delete but only if not in use.
	#
	my $query_result =
	    DBQueryWarn("select count(rsrcidx) from experiment_inputs ".
			"where input_data_idx='$input_data_idx' and ".
			"      rsrcidx!='$rsrcidx'");
	goto bad
	    if (! $query_result);

	DBQueryWarn("delete from experiment_inputs ".
		    "where input_data_idx='$input_data_idx'")
	    or goto bad;

	if (defined($nsidx) && $nsidx == $input_data_idx) {
	    DBQueryWarn("update experiment_resources set input_data_idx=NULL ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
960
			"where idx='$rsrcidx'")
961 962
		or goto bad;
	}
963 964 965 966 967 968
	next
	    if ($query_result->numrows);

	DBQueryWarn("delete from experiment_input_data ".
		    "where idx='$input_data_idx'")
	    or goto bad;
969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000
    }
  done:
    DBQueryWarn("unlock tables");
    return 0;

  bad:
    DBQueryWarn("unlock tables");
    return 1;
}

#
# Grab an input file.
#
sub GetInputFile($$$)
{
    my ($self, $idx, $pref) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $query_result =
	DBQueryWarn("select input from experiment_input_data ".
		    "where idx='$idx'");
    return -1
	if (! $query_result || !$query_result->numrows);

    my ($nsfile) = $query_result->fetchrow_array();
    $$pref = $nsfile;
    return 0;
}

1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024
#
# Get the virt experiment object;
#
sub GetVirtExperiment($)
{
    my ($self) = @_;

    return undef
	if (! ref($self));

    return $self->{'VIRTEXPT'}
        if (defined($self->{'VIRTEXPT'}));

    require VirtExperiment;

    my $virtexperiment = VirtExperiment->Lookup($self);
    if (!defined($virtexperiment)) {
	print STDERR "*** Could not get virtual experiment object for $self\n";
	return undef;
    }
    $self->{'VIRTEXPT'} = $virtexperiment;
    return $virtexperiment;
}

1025 1026 1027 1028 1029 1030 1031 1032 1033 1034
#
# Refresh a class instance by reloading from the DB.
#
sub Refresh($)
{
    my ($self) = @_;

    return -1
	if (! ref($self));

1035
    my $idx = $self->idx();
1036

1037
    my $query_result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1038
	DBQueryWarn("select * from experiments where idx=$idx");
1039 1040 1041 1042

    return -1
	if (!$query_result || !$query_result->numrows);

1043
    $self->{'EXPT'}       = $query_result->fetchrow_hashref();
1044
    $self->{'VIRTEXPT'}   = undef;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1045 1046
    $self->{'ISINSTANCE'} = undef;
    $self->{'ISTEMPLATE'} = undef;
1047 1048 1049 1050 1051 1052 1053 1054 1055

    $query_result =
	DBQueryWarn("select * from experiment_stats where exptidx='$idx'");
	
    return -1
	if (!$query_result || !$query_result->numrows);
    
    $self->{'STATS'} = $query_result->fetchrow_hashref();

1056 1057 1058 1059 1060 1061 1062 1063 1064 1065
    my $rsrcidx = $self->rsrcidx();

    $query_result =
	DBQueryWarn("select * from experiment_resources ".
		    "where idx='$rsrcidx'");
	
    return -1
	if (!$query_result || !$query_result->numrows);
    
    $self->{'RSRC'} = $query_result->fetchrow_hashref();
1066 1067 1068
    return 0;
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093
#
# Perform some updates ...
#
sub Update($$)
{
    my ($self, $argref) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $pid = $self->pid();
    my $eid = $self->eid();

    my $query = "update experiments set ".
	join(",", map("$_='" . $argref->{$_} . "'", keys(%{$argref})));

    $query .= " where pid='$pid' and eid='$eid'";

    return -1
	if (! DBQueryWarn($query));

    return Refresh($self);
}

1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111
#
# Worker class method to change experiment info.
# Assumes most argument checking was done elsewhere.
#
sub EditExp($$$$$$)
{
    my ($class, $experiment, $user, $doemail, $argref, $usrerr_ref) = @_;

    my %mods;
    my $noreport;
    my %updates;

    #
    # Converting the batchmode is tricky, but we can let the DB take care
    # of it by requiring that the experiment not be locked, and it be in
    # the swapped state. If the query fails, we know that the experiment
    # was in transition.
    #
1112 1113

    if (exists($argref->{"batchmode"}) && $experiment->batchmode() != $argref->{"batchmode"}) {
1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273
	my $success  = 0;

	my $batchmode;
	if ($argref->{"batchmode"} ne "1") {
	    $batchmode = 0;
	    $argref->{"batchmode"} = 0;
	}
	else {
	    $batchmode = 1;
	    $argref->{"batchmode"} = 1;
	}

	if ($experiment->SetBatchMode($batchmode) != 0) {
	    $$usrerr_ref = "Batch Mode: Experiment is running or in transition; ".
		"try again later";
	    return undef;
	}
	$mods{"batchmode"} = $batchmode;
    }

    #
    # Now update the rest of the information in the DB.
    #

    # Name change for experiment description.
    if (exists($argref->{"description"})) {
	$updates{"expt_name"} = ($mods{"description"} = $argref->{"description"});
    }

    # Note that timeouts are in hours in the UI, but in minutes in the DB. 
    if (exists($argref->{"idleswap_timeout"})) {
	$updates{"idleswap_timeout"} = 60 * 
	    ($mods{"idleswap_timeout"} = $argref->{"idleswap_timeout"});
    }
    if (exists($argref->{"autoswap_timeout"})) {
	$updates{"autoswap_timeout"} = 60 * 
	    ($mods{"autoswap_timeout"} = $argref->{"autoswap_timeout"});
    }

    foreach my $col ("idle_ignore", "swappable", "noswap_reason",
		     "idleswap", "noidleswap_reason", "autoswap", "savedisk",
		     "cpu_usage", "mem_usage", "linktest_level") {
	# Copy args we want so that others can't get through.
	if (exists($argref->{$col})) {
	    $updates{$col} = $mods{$col} = $argref->{$col};
	}
    }

    # Save state before change for the email message below.
    my $olds = ($experiment->swappable() ? "Yes" : "No");
    my $oldsr= $experiment->noswap_reason();
    my $oldi = ($experiment->idleswap() ? "Yes" : "No");
    my $oldit= $experiment->idleswap_timeout() / 60.0;
    my $oldir= $experiment->noidleswap_reason();
    my $olda = ($experiment->autoswap() ? "Yes" : "No");
    my $oldat= $experiment->autoswap_timeout() / 60.0;

    if (keys %updates) {
	if ($experiment->Update(\%updates)) {
	    return undef;
	}
    }

    my $creator = $experiment->creator();
    my $swapper = $experiment->swapper();
    my $uid = $user->uid();
    my $pid = $experiment->pid();
    my $eid = $experiment->eid();

    if (!keys %mods) {
	if (!$noreport) {
	    # Warn the user that the submit button was pressed with no effect.
	    $$usrerr_ref = "Submit: Nothing changed";
	    return undef;
	}
    }
    # Do not send this email if the user is an administrator
    # (adminmode does not matter), and is changing an expt he created
    # or swapped in. Pointless email.
    elsif ( $doemail &&
	     ! ($user->admin() &&
		($uid eq $creator || $uid eq $swapper)) ) {

	# Send an audit e-mail reporting what is being changed.
	my $target_creator = $experiment->GetCreator();
	my $target_swapper = $experiment->GetSwapper();

	my $user_name  = $user->name();
	my $user_email = $user->email();
	my $cname      = $target_creator->name();
	my $cemail     = $target_creator->email();
	my $sname      = $target_swapper->name();
	my $semail     = $target_swapper->email();

	my $s    = ($experiment->swappable() ? "Yes" : "No");
	my $sr   = $experiment->noswap_reason();
	my $i    = ($experiment->idleswap() ? "Yes" : "No");
	my $it   = $experiment->idleswap_timeout() / 60.0;
	my $ir   = $experiment->noidleswap_reason();
	my $a    = ($experiment->autoswap() ? "Yes" : "No");
	my $at   = $experiment->autoswap_timeout() / 60.0;

	my $msg = "\n".
	    "The swap settings for $pid/$eid have changed\n".
	    "\nThe old settings were:\n".
	    "Swappable:\t$olds\t($oldsr)\n".
	    "Idleswap:\t$oldi\t(after $oldit hrs)\t($oldir)\n".
	    "MaxDuration:\t$olda\t(after $oldat hrs)\n".
	    "\nThe new settings are:\n".
	    "Swappable:\t$s\t($sr)\n".
	    "Idleswap:\t$i\t(after $it hrs)\t($ir)\n".
	    "MaxDuration:\t$a\t(after $at hrs)\n".
	    "\nCreator:\t$creator ($cname <$cemail>)\n".
	    "Swapper:\t$swapper ($sname <$semail>)\n".
            "\nDifferences were:\n";
	my @report = 
	    ("Description:description", "Idle Ignore:idle_ignore",
	     "Swappable:swappable", "Noswap Reason:noswap_reason",
	     "Idleswap:idleswap", "Idleswap Timeout:idleswap_timeout",
	     "Noidleswap Reason:noidleswap_reason", "Autoswap:autoswap",
	     "Autoswap timeout:autoswap_timeout", "Savedisk:savedisk",
	     "Cpu Usage:cpu_usage", "Mem Usage:mem_usage",
	     "Batch Mode:batchmode", "Linktest Level:linktest_level");
	foreach my $line (@report) {
	    my ($label, $field) = split /:/, $line;
	    if (exists($mods{$field})) {
		$msg .= sprintf "%-20s%s\n", $label .":", $mods{$field};
	    }
	}
	$msg .= "\n".
	   "\nIf it is necessary to change these settings, ".
	   "please reply to this message \nto notify the user, ".
	   "then change the settings here:\n\n".
	   "$TBBASE/showexp.php3?pid=$pid&eid=$eid\n\n".
	   "Thanks,\nTestbed WWW\n";

	SENDMAIL("$user_name <$user_email>",
		 "$pid/$eid swap settings changed",
		 $msg, TBMAIL_OPS(), sprintf("Bcc: %s\nErrors-To:%s", 
					     TBMAIL_AUDIT(), TBMAIL_WWW()));
    }
    return 1;
}

sub SetBatchMode($$) {
    my ($self, $mode) = @_;

    my $reqstate = EXPTSTATE_SWAPPED();
    my $idx      = $self->idx();
    $mode        = ($mode ? 1 : 0);

    DBQueryFatal("lock tables experiments write");

    my $query_result =
	DBQueryFatal("update experiments set ".
		     "   batchmode=$mode ".
		     "where idx='$idx' and ".
		     "     expt_locked is NULL and state='$reqstate'");

    my $success = $query_result->numrows;    # XXX Was DBAffectedRows().
Russ Fish's avatar
Russ Fish committed
1274
    DBQueryFatal("unlock tables");
1275 1276 1277 1278

    return ($success ? 0 : -1);
}

1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291
#
# Stringify for output.
#
sub Stringify($)
{
    my ($self) = @_;
    
    my $pid   = $self->pid();
    my $eid   = $self->eid();

    return "[Experiment: $pid/$eid]";
}

1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346
#
# Generic function to look up some table values given a set of desired
# fields and some conditions. Pretty simple, not widely useful, but it
# helps to avoid spreading queries around then we need to. 
#
sub TableLookUp($$$;$)
{
    my ($self, $table, $fields, $conditions) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));
    
    my $exptidx = $self->idx();

    if (defined($conditions) && "$conditions" ne "") {
	$conditions = "and ($conditions)";
    }
    else {
	$conditions = "";
    }

    return DBQueryWarn("select distinct $fields from $table ".
		       "where exptidx='$exptidx' $conditions");
}

#
# Ditto for update.
#
sub TableUpdate($$$;$)
{
    my ($self, $table, $sets, $conditions) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    if (ref($sets) eq "HASH") {
	$sets = join(",", map("$_='" . $sets->{$_} . "'", keys(%{$sets})));
    }
    my $exptidx = $self->idx();

    if (defined($conditions) && "$conditions" ne "") {
	$conditions = "and ($conditions)";
    }
    else {
	$conditions = "";
    }

    return 0
	if (DBQueryWarn("update $table set $sets ".
			"where exptidx='$exptidx' $conditions"));
    return -1;
}

1347
#
1348 1349
# Check permissions. Allow for either uid or a user ref until all code
# updated.
1350 1351 1352
#
sub AccessCheck($$$)
{
1353
    my ($self, $user, $access_type) = @_;
1354 1355

    # Must be a real reference. 
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1356
    return 0
1357 1358
	if (! ref($self));

1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386
    if ($access_type < TB_EXPT_MIN ||
	$access_type > TB_EXPT_MAX) {
	die("*** Invalid access type: $access_type!");
    }

    # Admins do whatever they want.
    return 1
	if ($user->IsAdmin());

    my $group = $self->GetGroup();
    return 0
	if (!defined($group));
    my $project = $self->GetProject();
    return 0
	if (!defined($project));

    #
    # An experiment may be destroyed by the experiment creator or the
    # project/group leader.
    #
    my $mintrust;
    
    if ($access_type == TB_EXPT_READINFO) {
	$mintrust = PROJMEMBERTRUST_USER;
    }
    else {
	$mintrust = PROJMEMBERTRUST_LOCALROOT;
    }
1387

1388 1389 1390 1391 1392 1393 1394
    #
    # Either proper permission in the group, or group_root in the project.
    # This lets group_roots muck with other people's experiments, including
    # those in groups they do not belong to.
    #
    return TBMinTrust($group->Trust($user), $mintrust) ||
	TBMinTrust($project->Trust($user), PROJMEMBERTRUST_GROUPROOT);
1395 1396
}

1397
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1398 1399 1400 1401
# Create the directory structure. A template_mode experiment is the one
# that is created for the template wrapper, not one created for an
# instance of the experiment. The path changes slightly, although that
# happens down in the mkexpdir script.
1402 1403 1404 1405 1406 1407 1408 1409 1410
#
sub CreateDirectory($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

1411
    my $idx = $self->idx();
1412

1413
    mysystem("$MKEXPDIR $idx");
1414 1415 1416 1417 1418 1419
    return -1
	if ($?);
    # mkexpdir sets the path in the DB. 
    return Refresh($self)
}

1420 1421 1422 1423 1424 1425 1426 1427
#
# Load the project object for an experiment.
#
sub GetProject($)
{
    my ($self) = @_;

    # Must be a real reference. 
1428
    return undef
1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447
	if (! ref($self));

    my $project = Project->Lookup($self->pid_idx());
    
    if (! defined($project)) {
	print("*** WARNING: Could not lookup project object for $self!", 1);
	return undef;
    }
    return $project;
}

#
# Load the group object for an experiment.
#
sub GetGroup($)
{
    my ($self) = @_;

    # Must be a real reference. 
1448
    return undef
1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459
	if (! ref($self));

    my $group = Group->Lookup($self->gid_idx());
    
    if (! defined($group)) {
	print("*** WARNING: Could not lookup group object for $self!\n");
	return undef;
    }
    return $group;
}

1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510
#
# Return the user and work directories. The workdir in on boss and where
# scripts chdir to when they run. The userdir is across NFS on ops, and
# where files are copied to. 
#
sub WorkDir($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $pid = $self->pid();
    my $eid = $self->eid();

    return TBDB_EXPT_WORKDIR() . "/${pid}/${eid}";
}
sub UserDir($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    return $self->path();
}

# Event/Web key filenames.
sub EventKeyPath($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    return UserDir($self) . "/tbdata/eventkey"; 
}
sub WebKeyPath($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    return UserDir($self) . "/tbdata/webkey"; 
}

1511 1512 1513
#
# Add an environment variable.
#
1514
sub AddEnvVariable($$$;$)
1515
{
1516
    my ($self, $name, $value, $index) = @_;
1517 1518 1519 1520 1521 1522 1523

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $pid = $self->pid();
    my $eid = $self->eid();
1524
    my $exptidx = $self->idx();
1525

1526 1527 1528 1529 1530 1531 1532
    if (defined($value)) {
	$value = DBQuoteSpecial($value);
    }
    else {
	$value = "''";
    }

1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550
    #
    # Look to see if the variable exists, since a replace will actually
    # create a new row cause there is an auto_increment in the table that
    # is used to maintain order of the variables as specified in the NS file.
    #