ptopgen.in 28 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
Timothy Stack's avatar
 
Timothy Stack committed
5
# Copyright (c) 2000-2006 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
11
use Math::BigInt;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
12

13 14
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
15 16
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
17
	  "       -p include nodes the project has permission to use\n".
18
	  "       -e include given experiments resources\n" .
19 20
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
21
	  "       -r Include stuff for topologies with widearea nodes\n".
22
	  "       -s Include stuff for topologies with simulated nodes\n".
23
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
24
	  "       -m Override multiplex_factor\n".
25
	  "       -u Prune unused interfaces of allocated nodes (-e)\n".
26
	  "       -c Delay capacity override\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
	  "       -n Add in modelnet core and edge node features\n");
28 29
    exit(-1);
}
30
my $optlist = "s:e:m:vp:rSan:c:u";
31
my $mfactor;
32
my $virtstuff = 0;
33
my $widearea  = 0;
34
my $simstuff  = 0;
35
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
36 37
my $mnetcores = 0;
my $mnetedges = 0;
38
my $prune     = 0;
39
my $delaycap_override;
40

41 42 43 44
#
# Turn off line buffering on output
#
$| = 1;
45 46 47 48 49 50 51 52 53 54 55 56

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

57 58 59 60 61 62
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

63 64
######################################################################

65
my $TBROOT = "@prefix@";
66
use lib '@prefix@/lib';
67
require exitonwarn;
68
use libdb;
Kevin Atkinson's avatar
Kevin Atkinson committed
69 70 71
use libtblog;

tblog_stop_capture('stdout');
Leigh B. Stoller's avatar
Leigh B. Stoller committed
72

73 74
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

75 76 77
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
78 79
my %typemap       = ();
my %auxtypemap    = ();
Timothy Stack's avatar
 
Timothy Stack committed
80
my %areamap       = ();
81

82 83 84
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

85
my $pid;
86
my $exempt_eid;
87
my $switchtouse;
88

89 90 91 92 93 94 95 96 97 98 99 100 101 102
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
103 104 105
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
106 107 108
if (defined($options{"v"})) {
    $virtstuff = 1;
}
109 110 111
if (defined($options{"r"})) {
    $widearea = 1;
}
112 113 114
if (defined($options{"S"})) {
    $simstuff = 1;
}
115 116 117
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
118 119 120
if (defined($options{"a"})) {
    $allnodes = 1;
}
121 122 123
if (defined($options{"u"})) {
    $prune = 1;
}
124 125 126
if (defined($options{"c"})) {
    $delaycap_override = $options{"c"};
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
127 128 129 130 131 132 133 134 135
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
136
if (defined($options{"e"})) {
137 138 139
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
140
}
141 142
usage()
    if ($prune && !defined($exempt_eid));
143

144
# Read class/type maps
145
my $result =
146
    DBQueryFatal("select class,type,delay_capacity,".
147
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
148
		 "   speed, RAM, trivlink_maxspeed, imageable, osid ".
149
		 "from node_types");
150
while (($class,$type,$delaycapacity,
151 152
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed,
	$imageable, $osid)
153
	    = $result->fetchrow_array) {
154 155 156 157
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
158
    $map->{'SIMCAP'}   = $simcapacity;
159
    $map->{'ISVIRT'}   = $isvirt;
160 161
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
162 163
    $map->{'OSID'}     = $osid;
    $map->{'IMAGEABLE'}= $imageable;
164
    $map->{'TRIVSPEED'}= $trivspeed;
165 166 167
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
168 169 170 171 172 173

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

Timothy Stack's avatar
 
Timothy Stack committed
174 175
# Read node_startloc
$result = DBQueryFatal("select node_id,building from node_startloc");
Timothy Stack's avatar
 
Timothy Stack committed
176
while (($node,$building) = $result->fetchrow_array) {
Timothy Stack's avatar
 
Timothy Stack committed
177
    $areamap{$node} .= " area-$building:0";
Timothy Stack's avatar
 
Timothy Stack committed
178 179
}

180 181 182 183 184
#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
185 186 187 188 189 190 191 192 193 194
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
195 196
}

197 198 199 200 201 202 203 204 205 206 207 208
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
209 210 211 212 213 214 215 216 217
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
218
    push @{$auxtypes{$node_id}}, "$type:$count";
219
}
220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
240 241
}

242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
281
$result = DBQueryFatal("select osid from os_info where " .
282
    "nextosid is not null");
283
while (my ($osid) = $result->fetchrow()) {
284 285 286
    #
    # Check to see if they were allowed to use the real OSID
    #
287
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
288 289
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
290 291 292 293 294
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

295
# Print switches
296
if (defined($switchtouse)) {
297
    print "node $switchtouse switch:1 *lan:*\n";
298 299 300 301 302 303 304
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
305
	print "node $switch switch:1 *lan:*\n";
306 307
	$switches{$switch} = 1;
    }
308
}
309

310
# Find available nodes.
311
#
312 313
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
314
#
315

316
# the ordinary free condition for a local node.
317 318
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
319
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
320
                     "  np.eventstate='" . TBDB_NODESTATE_POWEROFF . "' or ".
321
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
322

323 324 325 326 327
if (defined($pid)) {
    $free_condition = "($free_condition and ".
	"(np.reserved_pid is null or np.reserved_pid='$pid'))";
}

328 329 330 331
# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
332
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
333
}
Chad Barb's avatar
Chad Barb committed
334

335 336 337 338 339 340
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

341
$result =
342
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
Timothy Stack's avatar
 
Timothy Stack committed
343
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null), " .
344 345
		 "  np.reserved_pid is not null,np.eventstate, ".
		 "  np.battery_percentage ".
346
		 "from nodes as a ".
347 348
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
349
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
350
		 "left join node_types as t on t.type=a.type ".
351
		 "where $free_condition and ".
352
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
353

354 355 356
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
357 358 359
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
Timothy Stack's avatar
 
Timothy Stack committed
360
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved,
361
	$prereserved,$eventstate,$battery_perc) = $result->fetchrow_array) {
362 363 364
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
365 366 367
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
368
    $node_def_boot_osid{$node} = $def_boot_osid;
369 370 371 372 373 374

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
Timothy Stack's avatar
 
Timothy Stack committed
375 376

    $is_prereserved{$node} = $prereserved;
377 378 379

    $curr_state{$node} = $eventstate;
    $curr_batt{$node} = $battery_perc;
380
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
381

382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406
#
# Find out which nodes are connected to which, so that we can add some special
# features
#
$result = DBQueryFatal("SELECT DISTINCT node_id1, node_id2 " .
                       "  FROM wires");
my %connections = ();
while (my ($node_id1, $node_id2) = $result->fetchrow()) {
    foreach my $nodes ([$node_id1, $node_id2], [$node_id2, $node_id1]) {
        my ($node1, $node2) = @$nodes;
        if ($connections{$node1}) {
            # Check to see if we've already added this one (possible if the
            # nodes appeared in node1,node2 order, then node2,node1
            if (!grep(/^$node2$/, @{$connections{$node1}})) {
                push @{$connections{$node1}}, $node2;
            }
        } else {
            $connections{$node1} = [$node2];
        }
    }
}

#
# Loop through and print out all nodes
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
407
foreach $node (keys(%nodes)) {
408 409 410
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
411
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
412 413
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
414
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
415
    
416
    my @types = ("$type:1");
417 418
    my @features;
    my @flags;
419
    my $needvirtgoo = 0;
420

421 422 423 424 425 426 427 428 429 430
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

431
    # Might be equal, which assign would sum as two, not one!
432 433
    if ($type ne $class) {
	push(@types, "$class:1");
434 435
    }

436
    if ($delay_capacity > 0) {
437 438 439 440 441 442
	# Comes from the NS file;
	$delay_capacity = $delaycap_override
	    if (defined($delaycap_override) &&
		$delaycap_override > 0 &&
		$delaycap_override < $delay_capacity);
	
443
	push @types, "delay:$delay_capacity";
444
	push @types, "delay-${type}:$delay_capacity";
445
    }
446

447 448 449
    #
    # Add any auxiliary types
    #
450 451 452
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
453

454 455 456
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
457 458
	}
	else {
459
	    $realtype = $auxtype;
460
	}
461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

Timothy Stack's avatar
 
Timothy Stack committed
477
    if (defined($areamap{$node})) {
Timothy Stack's avatar
 
Timothy Stack committed
478
	push @features, $areamap{$node};
Timothy Stack's avatar
 
Timothy Stack committed
479 480
    }

481
    my $cpu_ram_features_present = 0;
482 483 484 485
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
486
	push @types, "*lan:*";
487 488 489 490
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
491
	# Add CPU and RAM information
492
	$cpu_ram_features_present++;
493 494
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
495
	# Put this silly feature in so that we can try to keep vnodes
496 497 498 499
	# on the same pnode they were before - but only if updating
        if ($exempt_eid) {
            push @features, "${node}:0.0";
        }
500 501
    }

502 503 504 505 506 507 508 509 510 511
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
512
	# Add CPU and RAM information
513
	$cpu_ram_features_present++;
514 515 516 517
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
518 519 520 521
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
522 523
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
524
    }
525

526
    # Add features
527
    push(@features, @{$typemap{$type}->{'FEATURES'}});
528 529
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
530 531
    }

532 533 534 535 536 537 538
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }
539 540 541 542 543 544 545 546 547 548 549
    elsif (! $typemap{$type}->{'IMAGEABLE'} &&
	   defined($typemap{$type}->{'OSID'})) {
	#
	# If node is not imageable (and thus no entries in osidtoimageid,
	# then assume it always has its default OSID loaded and ready to
	# go, so that assign will agree to the allocation (assign_wrapper
	# adds a desire that says it has to be running the OSID the user
	# has selected, or the default OSID from the node_types table).
	#
	push @features, map "OS-$_:0", $typemap{$type}->{'OSID'};
    }
550

551 552 553 554 555 556 557 558
    # Add features indicating what this node has connections to
    if ($connections{$node}) {
        my @connected_to  = @{$connections{$node}};
        foreach my $other_end (@connected_to) {
            push(@features,"connected-to-$other_end:0.0");
        }
    }

559 560
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
561
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
562 563 564
	push(@features,"already_reserved:0");
    }

Timothy Stack's avatar
 
Timothy Stack committed
565 566 567 568
    if ($is_prereserved{$node}) {
	push(@features,"prereserved:0.9");
    }

569 570 571 572 573 574 575 576 577
    # For robots, prefer ones that are already powered on and/or won't need to
    # be recharged soon.
    if (defined($curr_state{$node}) && ($curr_state{$node} eq TBDB_NODESTATE_POWEROFF)) {
	push(@features,"poweroff:0.9");
    }
    if (defined($curr_batt{$node})) {
	push(@features,"powerneeded:" . (1.0 - $curr_batt{$node} / 100.0));
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
578 579 580 581 582 583 584 585
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

586 587 588 589 590 591 592 593 594 595 596
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
597
	}
598 599
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
600
    }
601 602 603 604 605

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


606
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
607 608
}

609 610 611 612 613 614 615 616 617 618 619
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
620 621 622 623
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
624
if ($widearea) {
625 626 627 628 629 630 631 632 633 634 635 636 637 638
    #
    # Set up 'the Internet' as a fake switch that all widearea nodes can
    # talk to.
    # Some day, it may make sense to connect control net ports to this
    # switch.
    #
    my $fake_inet_switch = "internet";
    my @inet_protos = ("ipv4");
    print "node $fake_inet_switch ", join(" ",map("*$_:*",@inet_protos)), "\n";
    
    #
    # Note - there is currently an assumption in this query that widearea nodes
    # have only one interface.
    #
639
    $result =
640 641
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site,".
                     "i.card,i.port,i.iface ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
642 643 644 645
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
646
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
647
		     "     wn.node_id=n.node_id ".
648 649
		     "left join interfaces as i on ".
		     "     n.node_id=i.node_id ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
650 651
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
652
    
653
    while (($physnode,$ptype,$status,$mpid,$meid,$site,$card,$port,$iface)
Leigh B. Stoller's avatar
Leigh B. Stoller committed
654
	   = $result->fetchrow_array) {
655
	my $class = $typemap{$ptype}->{'CLASS'};
656 657 658 659
	my @types;
	my @features;
	my @flags;

660 661 662 663 664
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
665 666
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
667 668 669
	    push @features, "down:1";
	}

670 671 672 673 674 675 676
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

677 678 679
	#
	# Add any auxiliary types.
	#
680 681
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
682

Leigh B. Stoller's avatar
Leigh B. Stoller committed
683 684 685 686 687
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
688
	    }
689
	    push(@types, $auxinfo);
690 691 692 693 694
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

695 696 697
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

698
	# Add features
699
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
700 701
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
702 703
	}

704 705 706 707 708 709 710 711
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

712 713 714 715 716
	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
717 718 719 720 721 722 723 724 725 726 727 728

        #
        # Print out a link to the 'internet'.
        # Note - we make up a fake bandwidth. In the future, maybe we
        # could put something real in there.
        #
        if ($iface) {
            print "link link-$physnode:$iface-$fake_inet_switch:(null) ".
                "$physnode:$physnode/$iface $fake_inet_switch:(null) " .
                "100000 0 0 1 ".
                join(" ",@inet_protos). "\n";
        }
729 730 731
    }
}

732
# Read interfaces
733
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
734
		     " from interfaces");
735
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
736
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
 
Chad Barb committed
737
    if ((defined $type) && ($type ne "")) {
738 739 740 741
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

742 743 744 745 746 747 748 749 750 751 752 753 754 755 756
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
757 758
}

759 760 761 762 763 764 765 766 767 768
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
769 770 771 772 773 774 775
$result = DBQueryFatal("SELECT node_id, iface, card, port, IP ".
		       "FROM interfaces");

while (($node,$iface,$card,$port,$IP) = $result->fetchrow_array) {
    next
	if ($prune && $is_reserved{$node} && (!defined($IP) || $IP eq ""));

776 777 778
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

779
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
780
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
781
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
782
       $result->fetchrow_array) {
783
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
784
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
785 786
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
787 788
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
789 790 791 792

	next
	    if (! exists($interfacecardports{"$node1:$iface1"}));
	
793 794 795 796 797 798
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
799 800
	    $bw = $iface1bw;
	} else {
801 802 803 804 805
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
806
	}
807
	if (defined($switches{$node2})) {
808 809
	    $used_switches{$node2} = 1;
	}
810 811 812 813 814 815 816 817
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
818
		$interconnects{"$node1:$node2"} = new Math::BigInt $bw;
819 820 821 822 823
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
824
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
825 826
	}
    } 
827
}
828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
848
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

878 879
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
880 881 882 883 884
    my $speed = $interconnects{$interconnect};
    # This is really dumb - BigInts like to print out with a leading '+',
    # which we don't want. Stript it off.
    $speed =~ s/^\+|-//;
    print "link link-$interconnect $src $dst $speed 0 0 1 ethernet\n";
885
}
886

887
#
888
# Fake switch. Hardwired for now. 
889
#
890
my @wireless_protos = ("80211", "80211a", "80211b", "80211g", "flex900");
891 892
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
893

894 895
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
896

897 898
    next
    if (!defined($nodes{$node}));
899
	
900 901 902
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
903

904 905 906 907 908 909 910 911
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
912

913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
929 930
	}
    }
931 932 933
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
934 935 936 937
}

exit(0);

938 939 940 941
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
942 943 944 945 946
	if ($interfacemap{"$node:$card:$port"} eq "") {
	    return "(null)";
	} else {
	    return $interfacemap{"$node:$card:$port"};
	}
947 948 949 950 951 952 953 954 955 956 957
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

958 959
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
960
sub get_ifacebw {
961
    ($node,$card,$port,$protocol) = @_;
962
    if (defined($interfacetypes{"$node:$card:$port"})) {
963
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
964 965 966
    }
    else {
	return $default_switchport_speed;
967 968
    }
}
969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}