tbswap.in 35.5 KB
Newer Older
1 2 3 4
#!/usr/bin/perl -w

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2005 University of Utah and the Flux Group.
6 7 8 9
# All rights reserved.
#
use English;

10 11 12
# Returns 0 on success.
# Returns 1 on non-assign_wrapper failure.
# Returns (1 | assign_wrapper's errorcode) on assign_wrapper failure.
13 14
# Returns |0x40 if update caused a swapout. Icky.
# Returns -1 on uncontrolled error (die called).
15

16 17 18 19 20
# XXX: handle error cases for update? (backup the db?)
# XXX: Shouldn't do idempotent stuff twice for update.
# XXX: repush/calc routing for update??? (tbprerun)
# XXX: previz for update???              (tbprerun)
# XXX: make snmpit faster for update.
Chad Barb's avatar
Chad Barb committed
21 22 23
#
# XXX: for update, expt is swapped out on os_setup fail.
#      (we only recover if assign fails)
24 25 26

sub usage()
{
27
    print STDERR "Usage: $0 -force { in | out | update [-reboot] [-eventsys_restart] } pid eid\n";
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
    exit(-1);
}

#
# Configure variables
#
my $TBROOT         = "@prefix@";
my $TESTMODE       = @TESTMODE@;
my $DISABLE_EVENTS = "@DISABLE_EVENT_SCHED@";

# Untaint the path
$ENV{'PATH'} = "/usr/bin:$TBROOT/libexec:$TBROOT/libexec/ns2ir" . 
    ":$TBROOT/sbin:$TBROOT/bin";

#
# Testbed Support libraries
#
use lib "@prefix@/lib";
use libdb;
use libtestbed;
48
use libadminctrl;
49
#require exitonwarn; # exitonwarn isn't really a module, so just require it
50 51 52 53

#
# Actual swap-in and swap-out functions, defined below.
#
54 55 56
sub doSwapout($);
sub doSwapin($);

57 58 59 60
#
# Firewall stuff
# XXX maybe should be elsewhere
#
61 62 63 64 65
sub FWSETUP()     { return 1; }
sub FWADDNODES()  { return 2; }
sub FWDELNODES()  { return 3; }
sub FWTEARDOWN()  { return 4; }
sub doFW($$$$);
66 67

# XXX fixme: should not be hardwired!
68
my $cnetstack = "-S Control";
69 70 71
my $cnetvlanname = "Control";


72 73 74 75
sub REAL()    { return 4; }
sub CLEANUP() { return 3; }
sub RETRY()   { return 2; }
sub UPDATE()  { return 1; }
Chad Barb's avatar
Chad Barb committed
76
sub UPDATE_RECOVER()  { return 0; }
77 78 79 80 81 82 83

#
# Turn off line buffering on output
#

$| = 1;

84 85
my $updateReboot   = 0;
my $updateReconfig = 1;
86 87
my $update_Eventsys_restart = 0;
my $elabinelab     = 0;
88 89
my $force  = 0;
my $errors = 0;
90
my $updatehosed = 0;
91
my $state;
92
my $canceled;
93 94
my $os_setup_pid;
my $cleanvlans;
95
my $nextState;
96 97

#
98
# First argument is either "in", "out", or "update";
99 100 101 102 103
# this value goes into $swapop.
#

my $swapop = shift;	

104 105 106 107
if (!$swapop || 
    (($swapop ne "in") && 
     ($swapop ne "out") &&
     ($swapop ne "update"))) {
108 109 110 111 112 113 114 115 116 117 118
    usage();
}

#
# Get other arguments.
#

while ($#ARGV > 1) {
    $arg = shift;
    if ($arg eq "-force") {
	$force = 1;
Chad Barb's avatar
Chad Barb committed
119 120
    } elsif ($arg eq "-reboot") {
	$updateReboot = 1;
121
	$updateReconfig = 0;
122 123 124
    } elsif ($arg eq "-noreconfig") {
	$updateReboot   = 0;
	$updateReconfig = 0;
125 126
    } elsif ($arg eq "-eventsys_restart" && $swapop eq "update") {
	$update_Eventsys_restart = 1;
127 128 129 130 131 132 133 134 135
    } else {
	usage();
    }
}
if ($#ARGV < 1) {
    usage();
}
my ($pid,$eid) = @ARGV;

136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151
#
# Untaint the arguments.
#
if ($pid =~ /^([-\@\w.]+)$/) {
    $pid = $1;
}
else {
    die("Tainted argument $pid!\n");
}
if ($eid =~ /^([-\@\w.]+)$/) {
    $eid = $1;
}
else {
    die("Tainted argument $eid!\n");
}

152 153 154 155 156 157 158 159 160 161 162 163 164
TBDebugTimeStampsOn();

#
# Print starting message.
#

print "Beginning swap-$swapop for $pid/$eid. " . TBTimeStamp() . "\n";
TBDebugTimeStamp("tbswap $swapop started");

#
# Get experiment state; verify that experiment exists.
#
if (! ($state = ExpState($pid, $eid))) {
165 166
    die("*** $0:\n".
	"    No such experiment $pid/$eid\n");
167
}
168 169 170 171 172 173
# Sanity check the current state. 
if (!$force) {
    if ($swapop eq "in") {
	die("*** $0:\n".
	    "    Experiment should be ACTIVATING. Currently $state.\n")
	    if ($state ne EXPTSTATE_ACTIVATING);
174
    }
175 176 177 178
    elsif ($swapop eq "out") {
	die("*** $0:\n".
	    "    Experiment should be SWAPPING. Currently $state.\n")
	    if ($state ne EXPTSTATE_SWAPPING);
179
    }
180 181 182 183
    elsif ($swapop eq "update") {
	die("*** $0:\n".
	    "    Experiment should be MODIFY_RESWAP. Currently $state.\n")
	    if ($state ne EXPTSTATE_MODIFY_RESWAP);
184 185
    }
}
186 187 188 189 190
# Get elabinelab status. See below.
if (! TBExptIsElabInElab($pid, $eid, \$elabinelab)) {
    die("*** $0:\n".
	"    Could not get elabinelab status for experiment $pid/$eid\n");
}
191

192 193 194 195 196
#
# See if the experiment is firewalled
#
my $firewalled = TBExptFirewall($pid, $eid);

197 198 199
#
# Do actual swapping
#
200 201 202 203 204
if ($swapop eq "out") {
    #
    # Swap out
    #
    $errors = doSwapout(REAL);
205
}
206
elsif ($swapop eq "update") {
207 208 209 210 211 212 213 214 215 216 217 218 219 220
    #
    # Before swapout, do cursory admission control to see if the
    # modified experiment will be swappable. assign_wrapper does a
    # more stringent check using assign.
    #
    print STDERR "Checking with Admission Control ...\n";
    if (! TBAdmissionControlCheck($UID, $pid, $eid, undef)) {
	print STDERR "Admission control failure!\n";
	print "Failingly finished swap-$swapop for $pid/$eid. " .
	    TBTimeStamp() . "\n";
	TBDebugTimeStamp("tbswap $swapop finished (failed)");
	exit(1);
    }
    
221 222 223 224 225 226 227
    #
    # Update.
    #
    # Phase One -- swap experiment partially out.
    #
    print STDERR "Backing up physical state...\n";
    TBExptBackupPhysicalState($pid,$eid);
228

229
    $errors = doSwapout(UPDATE);
Chad Barb's avatar
Chad Barb committed
230

231
    if ($errors) {
232
	#
233 234 235 236 237
	# Clean up the mess, leaving the experiment in the SWAPPED state,
	# 
	print STDERR "Cleaning up after errors.\n";
	doSwapout(CLEANUP);
	$updatehosed = 1;
238
    }
239
    else {
240
	#
241
	# Phase Two -- swap experiment back in.
242
	#
Chad Barb's avatar
Chad Barb committed
243 244
	$errors = doSwapin(UPDATE);

245
	if ($errors) {
Chad Barb's avatar
Chad Barb committed
246 247 248
	    #
	    # There were errors; see if we can recover.
	    #
249
	    my $CanRecover = 1;
Chad Barb's avatar
Chad Barb committed
250 251 252

	    if ($errors != 7) {
		print STDERR "Update failure occurred _after_ assign phase; ";
253
		$CanRecover = 0;
Chad Barb's avatar
Chad Barb committed
254 255
	    }

256 257 258 259 260 261 262 263
	    if ($CanRecover) {
		print STDERR "Recovering virtual and physical state.\n";

		if (TBExptRemoveVirtualState($pid, $eid) ||
		    TBExptRestoreVirtualState($pid, $eid) ||
		    TBExptRestorePhysicalState($pid,$eid)) {
		    print STDERR "Could not restore backed-up state; ";
		    $CanRecover = 0;
Chad Barb's avatar
Chad Barb committed
264
		}
265 266 267 268 269 270 271
		else {
		    print STDERR "Doing a recovery swap-in of old state.\n";

		    if (doSwapin(UPDATE_RECOVER)) {
			print STDERR "Could not swap in old physical state; ";
			$CanRecover = 0;
		    }
Chad Barb's avatar
Chad Barb committed
272 273
		}
	    }
274 275 276 277 278 279 280

	    #
	    # Some part of the recovery failed; must swap it out. swapexp
	    # (caller) will then have to do more clean up, hence the special
	    # exit status indicated by $updatehosed.
	    # 
	    if (! $CanRecover) {
281
		print STDERR "Recovery aborted! Swapping experiment out.\n";
Chad Barb's avatar
Chad Barb committed
282
		doSwapout(CLEANUP);
283 284 285 286
		$updatehosed = 1;
	    }
	    else {
		print STDERR "Update recovery successful.\n";
Chad Barb's avatar
Chad Barb committed
287
	    }
288
	}
Chad Barb's avatar
Chad Barb committed
289 290
    }
}
291 292 293 294 295
elsif ($swapop eq "in") {
    #
    # Swap in
    #
    my $retries = 2;
296 297 298 299 300 301 302 303 304 305 306 307 308

    #
    # Before real swapin, do cursory admission control. assign_wrapper does
    # a more stringent check using assign.
    #
    print STDERR "Checking with Admission Control ...\n";
    if (! TBAdmissionControlCheck($UID, $pid, $eid, undef)) {
	print STDERR "Admission control failure!\n";
	print "Failingly finished swap-$swapop for $pid/$eid. " .
	    TBTimeStamp() . "\n";
	TBDebugTimeStamp("tbswap $swapop finished (failed)");
	exit(1);
    }
309 310
    
    $errors = doSwapin(REAL);
Chad Barb's avatar
Chad Barb committed
311

312 313 314 315 316 317 318 319 320 321
    #
    # Attempt a retry if: 
    #   a) there were errors, 
    #   b) doswapin() indicated (via return code 3) a retry is appropriate,
    #   c) we haven't tried too many times already.
    #   d) The cancelflag has not been set.
    #   e) $TESTMODE == 0.
    #
    while ($errors == 3 && $retries && !$canceled && !$TESTMODE) {
	$retries--;
322

323 324
	print STDERR "Cleaning up after errors; will try again.\n";
	doSwapout(RETRY);
325

326 327
	print STDERR "Trying again...\n";
	$errors = doSwapin(RETRY);
328
    }
329 330
    if ($errors || $canceled) {
	print STDERR "Cleaning up after " .
331
	    ($canceled ? "cancelation" : "errors") . ".\n";
332
	doSwapout(CLEANUP);
333 334 335 336 337 338 339
    }
}

#
# Write appropriate message and exit.
#
if ($errors) {
340
    print "Failingly finished swap-$swapop for $pid/$eid. ".TBTimeStamp()."\n";
341
    TBDebugTimeStamp("tbswap $swapop finished (failed)");
Chad Barb's avatar
Chad Barb committed
342

343 344
    # Pass out magic value to indicate that update failed!
    exit(1 | ($updatehosed ? 0x40 : 0));
345
}
346
print "Successfully finished swap-$swapop for $pid/$eid. " .TBTimeStamp()."\n";
347 348
TBDebugTimeStamp("tbswap $swapop finished (succeeded)");
exit(0);
349 350 351 352

#################################

##
Chad Barb's avatar
Chad Barb committed
353
#
354 355
# doSwapout - Swaps experiment out.
#
Chad Barb's avatar
Chad Barb committed
356
#             If in REAL or CLEANUP,
357 358 359
#             this function will free all nodes for the 
#             experiment.
#
Chad Barb's avatar
Chad Barb committed
360
#             If in RETRY or UDPATE,
361 362 363 364 365 366
#             only nodes not in RES_READY will be freed.
#
#             Returns 0 on success, >0 on failure.
#
##

367 368
sub doSwapout($) {
    my $type = shift; # REAL==4, CLEANUP==3, RETRY==2, UPDATE==1.
369 370 371 372 373 374 375 376 377 378 379
    my $swapout_errors = 0;

    #
    # wait for os_setup;
    # this only applies if called after a failed doswapin.
    #
    if ($os_setup_pid) {
	print "Waiting for os_setup to finish\n";
	waitpid($os_setup_pid, 0);
	undef $os_setup_pid;
    }
Chad Barb's avatar
Chad Barb committed
380

381
    if (! $TESTMODE) { 
382 383 384
	if (! ($DISABLE_EVENTS || $elabinelab)) {
	    if ($type >= RETRY ||
		($update_Eventsys_restart && $type == UPDATE) ) {
385 386 387 388 389
		print "Stopping the event system\n";
		if (system("eventsys_control stop $pid $eid")) {
		    print STDERR "*** Failed to stop the event system.\n";
		    $swapout_errors = 1;
		}
390 391
	    }
	}
392 393 394 395 396 397
	
	#
	# Do teardown of inner elab. We must do this before we teardown the
	# vlans since the inner control network is a vlan, and we want that
	# active so inner boss can reboot the inner nodes (avoid power cycle).
	#
398
	if ($elabinelab && $type >= CLEANUP) {
399 400 401 402 403 404 405
	    print "Tearing down elabinelab. This could take a while.\n";
	    if (system("elabinelab -k $pid $eid")) {
		print STDERR "*** Failed to teardown elabinelab!\n";
		$swapout_errors = 1;
	    }
	}

406
	#
Chad Barb's avatar
Chad Barb committed
407
	# Clean up any VLANs in experiment.
408
	#
409 410 411 412 413 414 415 416 417 418 419 420 421
	# When modifying an elabinelab experiment, leave the vlans intact
	# so that the inner networks are not suddenly disconnected!
	#
	if (! ($elabinelab && $type == UPDATE)) {
	    TBDebugTimeStamp("snmpit started");
	    print STDERR "Removing VLANs.\n";
	    if (system("snmpit -r $pid $eid")) {
		print STDERR "*** Failed to reset VLANs\n";
		$swapout_errors = 1;
	    } else {
		$cleanvlans = 0;
	    }
	    TBDebugTimeStamp("snmpit finished");
422
	}
423
    }
Chad Barb's avatar
Chad Barb committed
424

425 426 427
    if ($type >= CLEANUP) {
	#
	# We're not attempting a retry;
428
	#
429
	# Stop all of the vnodes.
430
	#
431
	if (! $TESTMODE) { 	
432 433 434 435 436 437 438
	    print "Tearing down virtual nodes.\n";
	    TBDebugTimeStamp("vnode_setup -k started");
	    if (system("vnode_setup -d -k $pid $eid")) {
		print STDERR "*** Failed to tear down vnodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("vnode_setup finished");
439 440
	}

441
	if ($firewalled) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506
	    #
	    # If the panic button was pressed, put all nodes into admin
	    # mode and power them off. After the firewall is torn down,
	    # we can power them back up.
	    #
	    my @nodes     = ExpNodes($pid, $eid, 1);
	    my $ADMINOSID = TB_OSID_FREEBSD_MFS;
	    my $paniced;

	    TBExptGetPanicBit($pid, $eid, \$paniced);

	    if ($paniced) {
		print STDERR "Powering down nodes.\n";
		TBDebugTimeStamp("Powering down nodes");

		system("power off @nodes");
		if ($?) {
		    #
		    # If an error, cannot continue. Must leave firewall in
		    # place. 
		    #
		    print STDERR "*** Failed to power nodes off! Stopping.\n";
		    return 1;
		}

		#
		# XXX: node_admin should take a list of nodes, or pid,eid.
		#      Instead, call os_select directly for now. 
		#
		# Clear any one-shot boots and partition boots.
		#
		print STDERR "Changing OSID to admin MFS.\n";
		TBDebugTimeStamp("Changing OSID to admin MFS");

		# Order matters cause os_select sillyness.
		if (system("os_select -c -1 @nodes") ||
		    system("os_select -t $ADMINOSID @nodes") ||
		    system("os_select -c @nodes")) {

		    #
		    # If an error, cannot continue. Must leave firewall in
		    # place. 
		    #
		    print STDERR "*** Failed to reset OSIDs! Stopping.\n";
		    return 1;
		}

		#
		# Now we can power up the nodes again.
		#
		print STDERR "Powering up nodes.\n";
		TBDebugTimeStamp("Powering up nodes");

		system("power on @nodes");
		if ($?) {
		    #
		    # If an error, cannot continue. Must leave firewall in
		    # place. Eventually, we can continue past this, if we
		    # know what nodes failed. But for now we have to do the
		    # ISUP test to make sure nodes really got into the MFS.
		    #
		    print STDERR "*** Failed to power on nodes! Stopping.\n";
		    return 1;
		}
	    }
507 508 509 510 511

	    #
	    # Once all nodes are safely in the admin MFS, we can take
	    # down the firewall
	    #
512
	    doFW($pid, $eid, FWTEARDOWN, undef);
Leigh B. Stoller's avatar
Leigh B. Stoller committed
513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533

	    if ($paniced) {
		#
		# Now wait for ISUP. I do this here cause the reload daemon
		# will power cycle the nodes again if its reboot fails, and
		# that will happen if the nodes are not back into the MFS in
		# time. THe right thing to do is to store the power state in
		# the DB, and have the reload daemon turn the nodes back on.
		#
		print STDERR "Waiting for nodes to boot the MFS.\n";
		TBDebugTimeStamp("Waiting for nodes to boot the MFS");
		
		system("node_statewait -s " . TBDB_NODESTATE_ISUP . " @nodes");
		if ($?) {
		    #
		    # Okay to continue; reload daemon will probably send
		    # email later when the reload fails.
		    #
		    print STDERR "*** Some nodes failed to reboot. Continuing\n";
		}
	    }	    
534 535
	}

536 537
	#
	# remove all nodes from the experiment.
Chad Barb's avatar
Chad Barb committed
538
	# (nfree will send them to RES_FREE_DIRTY)
539 540 541 542 543 544 545 546
	#
	print STDERR "Freeing nodes.\n";
	TBDebugTimeStamp("nfree started");
	if (system("nfree $pid $eid")) {
	    print STDERR "*** Could not free nodes.\n";
	    $swapout_errors = 1;
	}
	TBDebugTimeStamp("nfree finished");
547 548 549 550 551

	#
	# Since this is an actual swapout, 
	# reset our count of swap out nag emails sent.
	#
552
	DBQueryWarn("update experiments set swap_requests='',sim_reswap_count='0' ".
553
		    "where eid='$eid' and pid='$pid'");
554 555
    } else {
	#
556
	# $type == RETRY or $type == UPDATE.
557 558
	# Therefore, don't deallocate nodes which have been successfully
	# incorporated into the experiment (i.e., are RES_READY).
Chad Barb's avatar
Chad Barb committed
559
	# (nfree will send deallocated nodes to RES_FREE_DIRTY)
560
	#
561 562 563 564 565 566 567 568
	my @failedpnodes = ();
	my @failedvnodes = ();
	
	my $db_result =
	    DBQueryFatal("select rv.node_id,n.allocstate,nt.isvirtnode ".
                         "  from reserved as rv ".
			 "left join nodes as n on n.node_id = rv.node_id ".
			 "left join node_types as nt on nt.type=n.type ".
569 570
			 "where rv.pid='$pid' and rv.eid='$eid'");

571
	while (my ($node,$allocstate,$isvirt) = $db_result->fetchrow_array) {
572
	    if ($allocstate ne TBDB_ALLOCSTATE_RES_READY()) {
573 574 575 576 577 578
		if ($isvirt) {
		    push(@failedvnodes, $node);
		}
		else {
		    push(@failedpnodes, $node);
		}
579 580 581
	    }
	}

582 583 584 585 586 587 588 589 590 591 592 593
	#
	# Tear down failed vnodes. Perhaps not needed?
	# 
	if (!$TESTMODE && @failedvnodes > 0) {
	    print "Tearing down failed virtual nodes.\n";
	    TBDebugTimeStamp("vnode_setup -k started");
	    if (system("vnode_setup -d -k $pid $eid @failedvnodes")) {
		print STDERR "*** Failed to tear down vnodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("vnode_setup -k finished");
	}
594

595 596 597 598
	#
	# Release all failed nodes.
	# 
	if (@failedpnodes > 0 || @failedvnodes > 0) {
599 600
	    print STDERR "Freeing failed nodes.\n";
	    
601
	    TBDebugTimeStamp("nfree started");
Chad Barb's avatar
Chad Barb committed
602 603 604 605 606
	    #
	    # Specify -x switch so when a physical node gets freed,
	    # any virtual nodes (owned by this experiment)
	    # sitting on top of it are freed as well.
	    #
607 608
	    if (system("nfree -x $pid $eid " .
		       join(" ", (@failedpnodes, @failedvnodes)))) {
609 610 611 612 613 614 615
		print STDERR "*** Could not free nodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("nfree finished");
	}
    }

616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639
    if (! $TESTMODE) {
	#
	# If the experiment has no Plab dslice nodes left, but still has
	# a Plab slice, destroy the slice
	#

	# Does the slice exist?
	$db_result =
	    DBQueryFatal("select slicename from plab_slices ".
			 "where pid='$pid' and eid='$eid'");

	if ($db_result->numrows) {
	    # Are there any dslice nodes left?
	    $db_result =
		DBQueryFatal("select n.node_id from nodes as n ".
			     "left join node_types as nt on n.type = nt.type ".
			     "left join reserved as r ".
			     " on r.node_id = n.node_id ".
			     "where r.pid='$pid' and r.eid='$eid' ".
			     " and nt.isplabdslice = 1");

	    if (!$db_result->numrows) {
		print "Destroying Planetlab slice.\n";
		TBDebugTimeStamp("plabslice destroy started");
640
		if (system("plabslice destroy $pid $eid")) {
641 642 643 644 645 646 647 648
		    print STDERR "*** Failed to destroy Plab dslice\n";
		    $swapout_errors = 1;
		}
		TBDebugTimeStamp("plabslice destroy finished");
	    }
	}
    }

649 650 651 652 653 654 655 656
    if (! $TESTMODE) {
	#
	# All of these errors are non-fatal on swapout. We find out about them
	# via email sent from the individual scripts.
	#

	#
	# Only reset mountpoints if this is an actual swapout, and
657
	# not a failed swapin(cleanup), update, or retry.
658
	#
659
	if ($type == REAL) {
660 661 662 663 664 665 666
	    print "Resetting mountpoints.\n";
	    TBDebugTimeStamp("exports started");
	    if (system("exports_setup")) {
		print STDERR "*** Failed to reset mountpoints.\n";
	    }
	    TBDebugTimeStamp("exports finished");
	}
Chad Barb's avatar
Chad Barb committed
667

668 669 670 671
	#
	# Resetting named maps and email lists is fast and idempotent,
	# so whatever.
	#
672 673 674 675 676 677
	print "Resetting named maps.\n";
	TBDebugTimeStamp("named started");
	if (system("named_setup")) {
	    print "*** WARNING: Failed to reset named map.\n";
	}
	TBDebugTimeStamp("named finished");
Chad Barb's avatar
Chad Barb committed
678

679 680
	print "Resetting email lists.\n";
	TBDebugTimeStamp("genelists started");
681
	if (system("genelists -t")) {
682 683 684 685 686
	    print "*** WARNING: Failed to reset email lists.\n";
	}
	TBDebugTimeStamp("genelists finished");
    }

687
    #
688 689 690
    # Wipe the DB clean except during UPDATE or RETRY. In those
    #    cases, assign_wrapper will reset the DB after reading
    #    the info.
691
    #
692 693 694 695
    if ( $type >= CLEANUP ) {
	print STDERR "Resetting DB.\n";
	TBExptRemovePhysicalState( $pid, $eid );
    }
696 697 698 699 700

    return $swapout_errors;
}

##
Chad Barb's avatar
Chad Barb committed
701
#
702 703
# doSwapin - Swaps experiment in.
#
Chad Barb's avatar
Chad Barb committed
704 705 706 707 708
#            Returns:
#              0 - successful swapin
#              1 - failed swapin; cleanup required.
#              3 - failed swapin; cleanup required; can retry.
#              7 - failed swapin; assign failed; no cleanup.
709 710
##

711
sub doSwapin($) {
712 713 714
    my $type = shift; # REAL==4, RETRY==2, UPDATE==1, UPDATE_RECOVER=0.
    # Just the physnodes ...
    my @deleted_pnodes = ();
715

716 717 718 719 720
    #
    # assign_wrapper does all the virtual to physical mapping 
    # and updating the DB state.
    #

Chad Barb's avatar
Chad Barb committed
721 722 723 724 725
    if ($type > UPDATE_RECOVER) {
	print "Mapping to physical reality ...\n";
	TBDebugTimeStamp("assign_wrapper started");

	#
726 727 728 729
	# Pass the -u (update) switch into assign_wrapper, which turns on
	# update mode. When doing a retry, must also fix the current nodes
	# to avoid stuff jumping around when simply trying to replace a node
	# that did not boot.
Chad Barb's avatar
Chad Barb committed
730 731
	#
	my $exitcode;
732 733 734
	my $wrapper = "assign_wrapper -u";
	$wrapper .= " -f"
	    if ($type == RETRY);
735
	
736
	if (system("$wrapper $pid $eid")) {
737 738 739 740
	    $exitcode = $? >> 8;

	    print STDERR "*** Failed ($exitcode) to map to reality.\n";

741 742
	    # Wrapper sets this bit when recovery is possible.
	    if ($exitcode & 64) {
743
		# We can recover. 
Chad Barb's avatar
Chad Barb committed
744
		return 7;
745 746
	    }
	    else {
747
		# No recovery, no retry.
Chad Barb's avatar
Chad Barb committed
748 749 750 751
		return 1;
	    }
	}
	TBDebugTimeStamp("assign_wrapper finished");
752

Chad Barb's avatar
Chad Barb committed
753 754
	print "Mapped to physical reality!\n";
    }
755

756
    # Check cancel flag before continuing. No retry, 
757
    TBGetCancelFlag($pid, $eid, \$canceled);
758 759 760
    return 1
	if ($canceled);

761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795
    #
    # Look for any nodes in RES_TEARDOWN. These need to be released,
    # and if a virtnode, they need to be torn down. We cannot wait for
    # the virtnodes to go down with the physnode they are hosted on,
    # so teardown and release the virtnodes first, and then do the
    # physnodes.
    #
    # Errors are fatal; no recovery or retry.
    #
    if ($type == UPDATE) {
	my $allocstate = TBDB_ALLOCSTATE_RES_TEARDOWN();
	
	$db_result =
	    DBQueryFatal("select r.node_id,nt.isvirtnode,nt.isremotenode ".
			 "  from reserved as r ".
			 "left join nodes as n on n.node_id=r.node_id ".
			 "left join node_types as nt on nt.type=n.type ".
			 "where r.pid='$pid' and r.eid='$eid' and ".
			 "      n.allocstate='$allocstate'");

	if ($db_result->numrows) {
	    my @virtnodes = ();
	    my @physnodes = ();
	    
	    print "Tearing down and releasing unused nodes\n";

	    # First teardown/release virtnodes. 
	    while (my ($node,$isvirt,$isrem) = $db_result->fetchrow_array()) {
		if ($isvirt) {
		    push(@virtnodes, $node);
		}
		elsif (!$isrem) {
		    push(@physnodes, $node);
		}
	    }
796 797 798
	    # See below.
	    @deleted_pnodes = @physnodes;
	    
799 800 801
	    if (@virtnodes) {
		TBDebugTimeStamp("vnode_setup started");
		
802
		if (system("vnode_setup -k $pid $eid @virtnodes")) {
803 804 805 806 807 808 809 810 811 812 813
		    print "Failed to tear down unused virtnodes!\n";
		    return 1;
		}
		TBDebugTimeStamp("vnode_setup finished");
		
		if (system("nfree $pid $eid @virtnodes")) {
		    print "Failed to nfree unused virtnodes!\n";
		    return 1;
		}
	    }
	    if (@physnodes) {
814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832
		if ($elabinelab) {
		    print "Removing nodes from inner elab.\n";
		    if (system("elabinelab -r $pid $eid @physnodes")) {
			print STDERR "*** Failed to remove inner nodes!\n";
			return 1;
		    }
		}

		#
		# XXX Nodes should actually be cleaned up, but we are not
		# doing that in the swapout case either, unless the panic
		# button was pressed, and in that case swapmod is not
		# allowed anyway (just swapout).
		# 
		if ($firewalled && doFW($pid, $eid,
					FWDELNODES, \@deleted_pnodes)) {
		    return 1;
		}
		
833 834 835 836 837 838 839 840
		if (system("nfree $pid $eid @physnodes")) {
		    print "Failed to nfree unused physnodes!\n";
		    return 1;
		}
	    }
	}
    }

841 842 843 844 845 846
    # Exit here if we are testing.
    if ($TESTMODE) {
	print "Testing run - Stopping here.\n";
	return 0;
    }

847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862
    #
    # Handle tarballs - we might need to fetch some from URLs if the user
    # asked for that.
    #
    print "Fetching tarballs and RPMs (if any) ...\n";
    TBDebugTimeStamp("tarfiles_setup started");

    if (system("tarfiles_setup $pid $eid")) {
	#
	# No recovery for now - what would we do?
	#
	print STDERR "*** Failed to set up tarballs.\n";
	return 1;
    }
    TBDebugTimeStamp("tarfiles_setup finished");

863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890
    #
    # If there are any Plab dslice nodes in the experiment, create the
    # dslice now
    #
    if ($type > UPDATE_RECOVER) {
	# Are there any Plab nodes?
	$db_result =
	    DBQueryFatal("select n.node_id from nodes as n ".
			 "left join node_types as nt on n.type = nt.type ".
			 "left join reserved as r on r.node_id = n.node_id ".
			 "where r.pid='$pid' and r.eid='$eid' ".
			 " and nt.isplabdslice = 1");

	if ($db_result->numrows) {
	    # Does slice already exist?
	    $db_result =
		DBQueryFatal("select slicename from plab_slices ".
			     "where pid='$pid' and eid='$eid'");

	    if (! $db_result->numrows) {
		my @plabnodes = ();
		
		while (my ($node) = $db_result->fetchrow_array()) {
		    push(@plabnodes, $node);
		}
		
		print "Creating Planetlab slice.\n";
		TBDebugTimeStamp("plabslice create started");
891
		if (system("plabslice create $pid $eid")) {
892 893 894 895 896 897 898 899
		    print STDERR "*** Failed to create Plab dslice\n";
		    return 3;
		}
		TBDebugTimeStamp("plabslice alloc finished");
	    }
	}
    }

900
    # Check cancel flag before continuing. No retry, 
901
    TBGetCancelFlag($pid, $eid, \$canceled);
902 903 904
    return 1
	if ($canceled);

905 906 907 908 909 910 911 912 913 914 915 916 917
    #
    # These things need to get started before the nodes come up, so we'll
    # do them before the os_setup. Everything else can done in parallel with
    # os_setup. (Actually, these probably can too, since they should finish
    # long before the nodes reboot, but better safe than sorry)
    #
    print "Setting up mountpoints.\n";
    TBDebugTimeStamp("mountpoints started");
    if (system("exports_setup")) {
	print STDERR "*** Failed to setup mountpoints.\n";
	return 1;
    }
    TBDebugTimeStamp("mountpoints finished");
Chad Barb's avatar
Chad Barb committed
918

919 920 921 922 923 924
    TBDebugTimeStamp("named started");
    print "Setting up named maps.\n";
    if (system("named_setup")) {
	print STDERR "*** WARNING: Failed to add node names to named map.\n";
	#
	# This is a non-fatal error.
Chad Barb's avatar
Chad Barb committed
925
	#
926 927
    }
    TBDebugTimeStamp("named finished");
Chad Barb's avatar
Chad Barb committed
928

929
    # Check cancel flag before continuing. No retry, 
930
    TBGetCancelFlag($pid, $eid, \$canceled);
931 932
    return 1
	if ($canceled);
Chad Barb's avatar
Chad Barb committed
933

934 935 936 937
    #
    # Setup any control-net firewall.
    # This must be done before reloading and rebooting nodes.
    #
938 939
    if ($firewalled && ($type == REAL || $type == UPDATE) &&
	doFW($pid, $eid, (($type == UPDATE) ? FWADDNODES : FWSETUP), undef)) {
940 941 942
	return 1;
    }

Chad Barb's avatar
Chad Barb committed
943 944
    #
    # If user specified -reboot to update,
945
    # and we are successfully performing the update,
946
    # then mark all nodes in experiment so os_setup will reboot them.
Chad Barb's avatar
Chad Barb committed
947
    #
948 949 950
    if (($type == UPDATE) &&
	($updateReboot || $updateReconfig)) {
	print STDERR "Marking nodes for reboot/reconfig.\n";
Chad Barb's avatar
Chad Barb committed
951
	$db_result =
952 953 954
	    DBQueryFatal("select r.node_id,n.allocstate from reserved as r ".
			 "left join nodes as n on n.node_id=r.node_id ".
			 "where r.pid='$pid' and r.eid='$eid'");
Chad Barb's avatar
Chad Barb committed
955

956 957 958 959 960 961 962 963
	while (my ($node,$allocstate) = $db_result->fetchrow_array) {
	    #
	    # If the node is INIT_CLEAN, leave it alone. It will still get
	    # rebooted, but will not falsely be tagged as dirty. This is
	    # important for vnodes too, where INIT_CLEAN indicated the vnode
	    # does not even exist yet (plab nodes).
	    #
	    if ($allocstate ne TBDB_ALLOCSTATE_RES_INIT_CLEAN()) {
964 965 966 967
		TBSetNodeAllocState($node,
				    ($updateReboot ?
				     TBDB_ALLOCSTATE_RES_INIT_DIRTY() :
				     TBDB_ALLOCSTATE_RES_RECONFIG()));
968
	    }
Chad Barb's avatar
Chad Barb committed
969 970 971
	}
    }

972 973 974 975 976
    #
    # Since it'll take a while for the nodes to reboot, we'll start now, and
    # wait for the os_setup to finish, down below
    #
    print "Resetting OS and rebooting.\n";
977
    TBDebugTimeStamp("launching os_setup");
978 979 980 981 982 983
    if (!($os_setup_pid = fork())) { 
	exec("os_setup $pid $eid") or return 1;
    } elsif ($os_setup_pid == -1) {
	print STDERR "*** Fork failed.\n";
	return 1;
    }
Chad Barb's avatar
Chad Barb committed
984

985
    #
986 987 988 989 990
    # XXX
    # Don't add any steps between here and the waitpid() call below
    # without verifying that 1) It's OK for nodes to come up before
    # the step has completed and 2) It's OK for the command to run in
    # parallel with os_setup (no DB dependencies, etc.)
991 992 993 994 995 996 997 998 999
    #

    print "Setting up VLANs.\n";
    TBDebugTimeStamp("snmpit started");
    if (system("snmpit -t $pid $eid")) {
	print STDERR "*** Failed to set up VLANs.\n";
	return 1;
    }
    TBDebugTimeStamp("snmpit finished");
Chad Barb's avatar
Chad Barb committed
1000

1001 1002 1003 1004
    #
    # An error now means that the VLANS need to be cleaned up.
    #
    $cleanvlans = 1;
Chad Barb's avatar
Chad Barb committed
1005

1006 1007
    print "Setting up email lists.\n";
    TBDebugTimeStamp("genelists started");
1008
    if (system("genelists -t")) {
1009 1010 1011 1012 1013 1014
	print STDERR "*** WARNING: Failed to update email lists.\n";
	#
	# This is a non-fatal error.
	# 
    }
    TBDebugTimeStamp("genelists finished");
Chad Barb's avatar
Chad Barb committed
1015

1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029
    #
    # Don't clear port counters on UPDATE.
    # (XXX should clear new nodes' port counters.)

    if ($type >= RETRY) {
	print "Clearing port counters.\n";
	TBDebugTimeStamp("portstats started");
	if (system("portstats -z -a -q $pid $eid")) {
	    print STDERR "*** WARNING: Failed to clear port counters.\n";
	    #
	    # This is a non-fatal error.
	    # 
	}
	TBDebugTimeStamp("portstats finished");
1030
    }
Chad Barb's avatar
Chad Barb committed
1031

1032 1033 1034 1035 1036 1037 1038 1039
    #
    # OK, let's see how that os_setup did
    #
    $kid = waitpid($os_setup_pid,0);
    if ($kid == $os_setup_pid) {
	undef $os_setup_pid; # Make sure doswapout() doesn't wait for it.
	if ($CHILD_ERROR) {
	    print STDERR "*** Failed to reset OS and reboot nodes.\n";
1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053
	    #
	    # If there is a firewall involved, it could be that the
	    # firewall rules are preventing essential communication,
	    # so don't retry.
	    #
	    # XXX should only do this if the user has specified additional
	    # rules.  But right now, I may screw up too!
	    #
	    if ($firewalled) {
		print STDERR "Not retrying, ".
		    "firewall may be preventing setup.\n";
		return 1;
	    }

1054
	    #
1055 1056
	    # Use returncode from os_setup process to
	    # set global $retry flag, indicating to caller
1057 1058 1059
	    # that it may be beneficial to attempt
	    # a doSwapin() again.
	    #
1060
            if (($CHILD_ERROR >> 8) == 1) {
Chad Barb's avatar
Chad Barb committed
1061
		return 3;
1062 1063
	    } else {
		print STDERR "Not retrying due to error type.\n";
Chad Barb's avatar
Chad Barb committed
1064
		return 1;
1065
	    }
1066 1067 1068 1069 1070 1071 1072
	}
    } else {
	undef $os_setup_pid;
	print STDERR "*** Error waiting for os_setup to finish.\n";
	return 1;
    }
    TBDebugTimeStamp("os_setup finished");
Chad Barb's avatar
Chad Barb committed
1073

1074 1075 1076 1077
    #
    # Okay, start the event system now that we know all the nodes have
    # rebooted (os_setup is done). This only takes a moment (puts itself
    # in the background), so its not enough of a delay to worry about.
1078 1079
    # Don't do this during an update, since we didn't kill the 
    # event system previously, so starting it again will fail!
1080
    # 
1081
    if (! ($DISABLE_EVENTS || $elabinelab)) {
1082 1083
	if ( $update_Eventsys_restart || 
	    ($type != UPDATE && $type != UPDATE_RECOVER) ) {
1084 1085 1086 1087 1088 1089 1090
	    print "Starting the event system.\n";
	    TBDebugTimeStamp("eventsys_control started");
	    if (system("eventsys_control start $pid $eid")) {
		print STDERR "*** Failed to start the event system.\n";
		return 1;
	    }
	    TBDebugTimeStamp("eventsys_control finished");
1091 1092
	}
    }
Chad Barb's avatar
Chad Barb committed
1093

1094 1095 1096
    #
    # ElabinElab setup. This might not be the right place for this!
    #
1097 1098 1099
    if ($elabinelab && !$TESTMODE && ($type == REAL || $type == UPDATE)) {
	my $optarg = ($type == UPDATE ? "-u" : "");
	
1100 1101
	print "Setting up elabinelab. This could take a while!\n";
	TBDebugTimeStamp("elabinelab setup started");
1102
	if (system("elabinelab $optarg $pid $eid")) {
1103 1104 1105
	    print STDERR "*** Failed to setup elabinelab!\n";
	    return 1;
	}
1106
	TBDebugTimeStamp("ElabInElab setup finished");
1107 1108
    }

1109 1110
    return 0;
}
1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122

#
# Setup and teardown experiment firewall.
#
# XXX note that right now, we just setup the switch infrastructure
# first, and then just let everything else go.  Firewalled nodes will
# not boot until the firewall is up since the VLAN is isolated til then.
# The firewall will boot ok since it still talks to the real control net.
#
# XXX for tearing down firewalls, we assume that nodes have been "cleansed"
# and it is safe to put ports back into the default control net VLAN.
#
1123 1124
sub doFW($$$$) {
    my ($pid, $eid, $action, $nodelist) = @_;
1125
    my ($fwnode, $fwvlanname, $fwvlan, $fwport, $fwvid);
1126
    my %nodenames;
1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139

    #
    # See if there is a firewall, fetching node/VLAN info if so.
    # If not, we are all done.
    #
    if (!TBExptFirewall($pid, $eid, \$fwnode, \$fwvid, \$fwvlan)) {
	return 0;
    }

    if ($action == FWSETUP) {
	$fwvid = TBGetUniqueIndex("cnet_vlanid");

	print "Setting up control net firewall.\n";
1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150
    }
    else {
	if ($action == FWADDNODES) {
	    print "Adding nodes to control net firewall.\n";
	}
	elsif ($action == FWDELNODES) {
	    print "Removing nodes from control net firewall.\n";
	}
	else {
	    print "Tearing down control net firewall.\n";
	}
1151 1152 1153 1154 1155 1156 1157

	# Prior setup didn't succeed, nothing to do
	if (!defined($fwvid)) {
	    return 0;
	}
    }

1158 1159 1160 1161 1162 1163 1164
    # See below.
    if (defined($nodelist)) {
	foreach my $node (@$nodelist) {
	    $nodenames{$node} = $node;
	}
    }

1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175
    # XXX vlanid in the DB is currently an int, we need a more unique name
    $fwvlanname = "fw$fwvid";

    #
    # Find all the experiment nodes and their control interface switch ports
    #
    # XXX this may be replaced by a call to SNMPIT that just specifies
    # the pid/eid.  In that case someone else will first have to poplulate
    # the vlans table with this same info. 
    #
    my $db_result =
1176 1177 1178 1179 1180 1181
	DBQueryWarn("SELECT r.node_id,w.card1 ".
		    "  FROM wires AS w, reserved AS r ".
		    "WHERE r.node_id=w.node_id1 AND r.pid='$pid' ".
		    "  AND r.eid='$eid' AND w.type='Control'");
    return 1
	if (!$db_result);
1182 1183 1184

    my $portlist = "";
    while (my ($node,$cif) = $db_result->fetchrow_array()) {
1185
	print "$node $cif\n";
1186 1187
	if ($node eq $fwnode) {
	    $fwport = "$node:$cif";
1188 1189 1190 1191 1192 1193 1194 1195
	}
	elsif (defined($nodelist)) {
 	    print "foo @$nodelist\n";
	    # Only nodes we are moving in/out of the experiment.
	    $portlist .= " $node:$cif"
		if (exists($nodenames{$node}));
	}
	else {
1196 1197 1198 1199
	    $portlist .= " $node:$cif";
	}
    }
    if (!defined($fwport)) {
1200
	print STDERR "*** Firewall node '$fwnode' not found in $pid/${eid}!\n";
1201 1202 1203
	return 0;
    }
    if ($portlist eq "") {
1204 1205 1206 1207 1208 1209
	#
	# We catch this up in swapexp; admin users can specify just a firewall,
	# but mere users must have at least one firewalled node. Just print
	# the warning though. 
	# 
	print STDERR "*** WARNING: No firewalled nodes in $pid/${eid}!\n";
1210 1211 1212 1213 1214 1215 1216
    }

    #
    # XXX hack commands til we nail down the API
    #
    my $fwsetupstr1 = "snmpit $cnetstack -m $fwvlanname $portlist";
    my $fwsetupstr2 = "snmpit $cnetstack -T $fwport $cnetvlanname $fwvlanname";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1217
    my $fwtakedownstr0 = "snmpit $cnetstack -e $fwport";
1218 1219
    my $fwtakedownstr1 = ($portlist eq "" ? "true" :
			  "snmpit $cnetstack -m $cnetvlanname $portlist");
1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245
    my $fwtakedownstr2 = "snmpit $cnetstack -o $fwvlanname";
    my $fwtakedownstr3 = "snmpit $cnetstack -U $fwport";
    my $fwtakedownstr4 = "snmpit $cnetstack -m $cnetvlanname $fwport";

    if (0) {
    # XXX debug fer now
    TBDebugTimeStamp("    setup1: $fwsetupstr1");
    TBDebugTimeStamp("    setup2: $fwsetupstr2");
    TBDebugTimeStamp(" teardown1: $fwtakedownstr1");
    TBDebugTimeStamp(" teardown2: $fwtakedownstr2");
    TBDebugTimeStamp(" teardown3: $fwtakedownstr3");
    TBDebugTimeStamp(" teardown4: $fwtakedownstr4");
    if ($action == FWSETUP) {
	my $lan = 100 + $fwvid;
	$fwsetupstr1    = "/bin/echo VLAN \#$lan on cisco2";
	$fwsetupstr2    = "true";
    } else {
	$fwtakedownstr1 = "true";
	$fwtakedownstr2 = "true";
	$fwtakedownstr3 = "true";
	$fwtakedownstr4 = "true";
    }
    }

    if ($action == FWSETUP) {
	TBDebugTimeStamp("snmpit firewall setup: VLAN");
1246
	print "doFW: '$fwsetupstr1'\n";
1247 1248 1249 1250 1251 1252 1253 1254
	my $snmpit_out = `$fwsetupstr1`;
	if ($? != 0 || $snmpit_out !~ /VLAN #(\d+) on /) {
	    print STDERR "*** Failed to setup Firewall control net VLAN.\n";
	    return 1;
	}
	my $fwvlan = $1;

	TBDebugTimeStamp("snmpit firewall setup: trunk");
1255
	print "doFW: '$fwsetupstr2'\n";
1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271
	if (system($fwsetupstr2)) {
	    print STDERR "*** Failed to setup Firewall trunk on port $fwport.\n";
	    if (system($fwtakedownstr1)) {
		print STDERR
		    "*** Could not return $portlist to Control VLAN!\n";
	    }
	    if (system($fwtakedownstr2)) {
		print STDERR
		    "*** Could not destroy VLAN $fwvlanname ($fwvlan)!\n";
	    }
	    return 1;
	}
	TBDebugTimeStamp("snmpit firewall setup done");

	# Record VLAN info now that everything is done
	TBSetExptFirewallVlan($pid, $eid, $fwvid, $fwvlan);
1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294
    }
    elsif ($action == FWADDNODES) {
	TBDebugTimeStamp("snmpit firewall port addition");
	print "doFW: '$fwsetupstr1'\n";
	my $snmpit_out = `$fwsetupstr1`;
	if ($?) {
	    print STDERR
	        "*** Failed to add nodes to Firewall control net VLAN.\n";
	    return 1;
	}
	TBDebugTimeStamp("snmpit firewall setup done");
    }
    elsif ($action == FWDELNODES) {
	TBDebugTimeStamp("snmpit firewall port deletion");
	print "doFW: '$fwtakedownstr1'\n";
	if (system($fwtakedownstr1)) {
	    print STDERR
		"*** Failed to remove nodes from Firewall control net VLAN.\n";
	    return 1;
	}
	TBDebugTimeStamp("snmpit firewall setup done");
    }
    else {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1295
	TBDebugTimeStamp("snmpit re-enable fw control port: $fwport");
1296
	print "doFW: '$fwtakedownstr0'\n";
1297
	my $failed = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1298 1299 1300 1301 1302 1303
	if (system($fwtakedownstr0)) {
	    print STDERR
		"*** Could not re-enable firewall control port $fwport!\n";
	    $failed = 1;
	}
	TBDebugTimeStamp("snmpit firewall teardown: VLAN");
1304
	print "doFW: '$fwtakedownstr1'\n";
1305 1306 1307 1308 1309
	if (system($fwtakedownstr1)) {
	    print STDERR
		"*** Could not return $portlist to Control VLAN!\n";
	    $failed = 1;
	}
1310
	print "doFW: '$fwtakedownstr2'\n";
1311 1312 1313 1314 1315 1316
	if (system($fwtakedownstr2)) {
	    print STDERR
		"*** Could not destroy VLAN $fwvlanname ($fwvlan)!\n";
	    $failed = 1;
	}
	TBDebugTimeStamp("snmpit firewall teardown: trunk");
1317
	print "doFW: '$fwtakedownstr3'\n";
1318 1319 1320 1321 1322
	if (system($fwtakedownstr3)) {
	    print STDERR
		"*** Could not tear down trunk on $fwport!\n";
	    $failed = 1;
	}
1323
	print "doFW: '$fwtakedownstr4'\n";
1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334
	if (system($fwtakedownstr4)) {
	    print STDERR
		"*** Could not return $fwport to Control VLAN!\n";
	    $failed = 1;
	}
	if ($failed) {
	    return 1;
	}
	TBDebugTimeStamp("snmpit firewall teardown done");

	# Clean VLAN info from DB
1335
	TBClearExptFirewallVlan($pid, $eid);
1336 1337 1338
    }
    return 0;
}