ptopgen.in 23.2 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2
3
4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6
7
8
# All rights reserved.
#

9
10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12
13
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
14
15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
16
	  "       -p include nodes the project has permission to use\n".
17
	  "       -e include given experiments resources\n" .
18
19
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
20
	  "       -r Include stuff for topologies with widearea nodes\n".
21
	  "       -s Include stuff for topologies with simulated nodes\n".
22
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23
24
	  "       -m Override multiplex_factor\n".
	  "       -n Add in modelnet core and edge node features\n");
25
26
    exit(-1);
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
my $optlist = "s:e:m:vp:rSan:";
28
my $mfactor;
29
my $virtstuff = 0;
30
my $widearea  = 0;
31
my $simstuff  = 0;
32
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
33
34
my $mnetcores = 0;
my $mnetedges = 0;
35

36
37
38
39
#
# Turn off line buffering on output
#
$| = 1;
40
41
42
43
44
45
46
47
48
49
50
51

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

52
53
54
55
56
57
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

58
59
######################################################################

60
my $TBROOT = "@prefix@";
61
use lib '@prefix@/lib';
62
require exitonwarn;
63
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
64

65
66
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

67
68
69
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
70
71
my %typemap       = ();
my %auxtypemap    = ();
72

73
74
75
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

76
my $pid;
77
my $exempt_eid;
78
my $switchtouse;
79

80
81
82
83
84
85
86
87
88
89
90
91
92
93
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
94
95
96
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
97
98
99
if (defined($options{"v"})) {
    $virtstuff = 1;
}
100
101
102
if (defined($options{"r"})) {
    $widearea = 1;
}
103
104
105
if (defined($options{"S"})) {
    $simstuff = 1;
}
106
107
108
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
109
110
111
if (defined($options{"a"})) {
    $allnodes = 1;
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
112
113
114
115
116
117
118
119
120
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
121
if (defined($options{"e"})) {
122
123
124
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
125
126
}

127
# Read class/type maps
128
my $result =
129
    DBQueryFatal("select class,type,delay_capacity,".
130
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
131
		 "   speed, RAM, trivlink_maxspeed ".
132
		 "from node_types");
133
while (($class,$type,$delaycapacity,
134
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed)
135
	    = $result->fetchrow_array) {
136
137
138
139
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
140
    $map->{'SIMCAP'}   = $simcapacity;
141
    $map->{'ISVIRT'}   = $isvirt;
142
143
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
144
    $map->{'TRIVSPEED'}= $trivspeed;
145
146
147
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
148
149
150
151
152
153
154
155
156
157
158

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
159
160
161
162
163
164
165
166
167
168
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
169
170
}

171
172
173
174
175
176
177
178
179
180
181
182
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
183
184
185
186
187
188
189
190
191
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
192
    push @{$auxtypes{$node_id}}, "$type:$count";
193
}
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
214
215
}

216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
255
$result = DBQueryFatal("select osid from os_info where " .
256
    "nextosid is not null");
257
while (my ($osid) = $result->fetchrow()) {
258
259
260
    #
    # Check to see if they were allowed to use the real OSID
    #
261
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
262
263
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
264
265
266
267
268
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

269
# Print switches
270
if (defined($switchtouse)) {
271
    print "node $switchtouse switch:1 *lan:*\n";
272
273
274
275
276
277
278
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
279
	print "node $switch switch:1 *lan:*\n";
280
281
	$switches{$switch} = 1;
    }
282
}
283

284
# Find available nodes.
285
#
286
287
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
288
#
289

290
# the ordinary free condition for a local node.
291
292
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
293
294
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
295
296
297
298
299

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
300
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
301
}
Chad Barb's avatar
Chad Barb committed
302

303
304
305
306
307
308
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

309
$result =
310
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
311
312
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
313
314
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
315
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
316
		 "left join node_types as t on t.type=a.type ".
317
		 "where $free_condition and ".
318
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
319

320
321
322
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
323
324
325
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
326
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
327
    = $result->fetchrow_array) {
328
329
330
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
331
332
333
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
334
    $node_def_boot_osid{$node} = $def_boot_osid;
335
336
337
338
339
340

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
341
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
342
343

foreach $node (keys(%nodes)) {
344
345
346
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
347
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
348
349
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
350
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
351
    
352
    my @types = ("$type:1");
353
354
    my @features;
    my @flags;
355
    my $needvirtgoo = 0;
356

357
358
359
360
361
362
363
364
365
366
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

367
    # Might be equal, which assign would sum as two, not one!
368
369
    if ($type ne $class) {
	push(@types, "$class:1");
370
371
    }

372
    if ($delay_capacity > 0) {
373
	push @types, "delay:$delay_capacity";
374
	push @types, "delay-${type}:$delay_capacity";
375
    }
376

377
378
379
    #
    # Add any auxiliary types
    #
380
381
382
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
383

384
385
386
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
387
388
	}
	else {
389
	    $realtype = $auxtype;
390
	}
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

407
    my $cpu_ram_features_present = 0;
408
409
410
411
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
412
	push @types, "*lan:*";
413
414
415
416
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
417
	# Add CPU and RAM information
418
	$cpu_ram_features_present++;
419
420
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
421
422
423
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
424
425
    }

426
427
428
429
430
431
432
433
434
435
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
436
	# Add CPU and RAM information
437
	$cpu_ram_features_present++;
438
439
440
441
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
442
443
444
445
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
446
447
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
448
    }
449

450
    # Add features
451
    push(@features, @{$typemap{$type}->{'FEATURES'}});
452
453
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
454
455
    }

456
457
458
459
460
461
462
463
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }

464
465
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
466
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
467
468
469
	push(@features,"already_reserved:0");
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
470
471
472
473
474
475
476
477
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

478
479
480
481
482
483
484
485
486
487
488
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
489
	}
490
491
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
492
    }
493
494
495
496
497

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


498
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
499
500
}

501
502
503
504
505
506
507
508
509
510
511
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
512
513
514
515
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
516
517
if ($widearea) {
    $result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
518
519
520
521
522
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site ".
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
523
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
524
525
526
		     "     wn.node_id=n.node_id ".
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
527
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
528
529
    while (($physnode,$ptype,$status,$mpid,$meid,$site)
	   = $result->fetchrow_array) {
530
	my $class = $typemap{$ptype}->{'CLASS'};
531
532
533
534
	my @types;
	my @features;
	my @flags;

535
536
537
538
539
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
540
541
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
542
543
544
	    push @features, "down:1";
	}

545
546
547
548
549
550
551
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

552
553
554
	#
	# Add any auxiliary types.
	#
555
556
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
557

Leigh B. Stoller's avatar
Leigh B. Stoller committed
558
559
560
561
562
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
563
	    }
564
	    push(@types, $auxinfo);
565
566
567
568
569
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

570
571
572
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

573
	# Add features
574
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
575
576
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
577
578
	}

579
580
581
582
583
584
585
586
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

587
588
589
590
591
592
593
594
	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

595
# Read interfaces
596
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
597
		     " from interfaces");
598
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
599
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
   
Chad Barb committed
600
    if ((defined $type) && ($type ne "")) {
601
602
603
604
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
620
621
}

622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
$result = DBQueryFatal("SELECT node_id, iface, card, port FROM interfaces");
while (($node,$iface,$card,$port) = $result->fetchrow_array) {
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

637
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
638
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
639
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
640
       $result->fetchrow_array) {
641
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
642
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
643
644
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
645
646
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
647
648
649
650
651
652
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
653
654
	    $bw = $iface1bw;
	} else {
655
656
657
658
659
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
660
	}
661
	if (defined($switches{$node2})) {
662
663
	    $used_switches{$node2} = 1;
	}
664
665
666
667
668
669
670
671
672
673
674
675
676
677
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
678
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
679
680
	}
    } 
681
}
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
702
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

732
733
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
734
735
    print "link link-$interconnect $src $dst $interconnects{$interconnect} " .
	"0 0 1 ethernet\n";
736
}
737

738
#
739
# Fake switch. Hardwired for now. 
740
#
741
742
743
my @wireless_protos = ("80211", "80211a", "80211b", "80211g");
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
744

745
746
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
747

748
749
    next
    if (!defined($nodes{$node}));
750
	
751
752
753
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
754

755
756
757
758
759
760
761
762
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
763

764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
780
781
	}
    }
782
783
784
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
785
786
787
788
}

exit(0);

789
790
791
792
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
793
794
795
796
797
	if ($interfacemap{"$node:$card:$port"} eq "") {
	    return "(null)";
	} else {
	    return $interfacemap{"$node:$card:$port"};
	}
798
799
800
801
802
803
804
805
806
807
808
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

809
810
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
811
sub get_ifacebw {
812
    ($node,$card,$port,$protocol) = @_;
813
    if (defined($interfacetypes{"$node:$card:$port"})) {
814
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
815
816
817
    }
    else {
	return $default_switchport_speed;
818
819
    }
}
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}