ptopgen.in 28.3 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2006 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
11
use Math::BigInt;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
12

13 14
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
15 16
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
17
	  "       -p include nodes the project has permission to use\n".
18
	  "       -e include given experiments resources\n" .
19 20
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
21
	  "       -r Include stuff for topologies with widearea nodes\n".
22
	  "       -s Include stuff for topologies with simulated nodes\n".
23
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
24
	  "       -m Override multiplex_factor\n".
25
	  "       -u Prune unused interfaces of allocated nodes (-e)\n".
26
	  "       -c Delay capacity override\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
	  "       -n Add in modelnet core and edge node features\n");
28 29
    exit(-1);
}
30
my $optlist = "s:e:m:vp:rSan:c:u";
31
my $mfactor;
32
my $virtstuff = 0;
33
my $widearea  = 0;
34
my $simstuff  = 0;
35
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
36 37
my $mnetcores = 0;
my $mnetedges = 0;
38
my $prune     = 0;
39
my $delaycap_override;
40

41 42 43 44
#
# Turn off line buffering on output
#
$| = 1;
45 46 47 48 49 50 51 52 53 54 55 56

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

57 58 59 60 61 62
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

63 64
######################################################################

65
my $TBROOT = "@prefix@";
66
use lib '@prefix@/lib';
67
require exitonwarn;
68
use libdb;
Kevin Atkinson's avatar
Kevin Atkinson committed
69
use libtblog;
70
use NodeType;
Kevin Atkinson's avatar
Kevin Atkinson committed
71 72

tblog_stop_capture('stdout');
Leigh B. Stoller's avatar
Leigh B. Stoller committed
73

74 75
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

76 77 78
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
79 80
my %typemap       = ();
my %auxtypemap    = ();
81
my %areamap       = ();
82

83 84 85
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

86
my $pid;
87
my $exempt_eid;
88
my $switchtouse;
89

90 91 92 93 94 95 96 97 98 99 100 101 102 103
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
104 105 106
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
107 108 109
if (defined($options{"v"})) {
    $virtstuff = 1;
}
110 111 112
if (defined($options{"r"})) {
    $widearea = 1;
}
113 114 115
if (defined($options{"S"})) {
    $simstuff = 1;
}
116 117 118
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
119 120 121
if (defined($options{"a"})) {
    $allnodes = 1;
}
122 123 124
if (defined($options{"u"})) {
    $prune = 1;
}
125 126 127
if (defined($options{"c"})) {
    $delaycap_override = $options{"c"};
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
128 129 130 131 132 133 134 135 136
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
137
if (defined($options{"e"})) {
138 139 140
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
141
}
142 143
usage()
    if ($prune && !defined($exempt_eid));
144

145
# Read class/type maps
146
my $result =
147 148 149
    DBQueryFatal("select class,type,isvirtnode from node_types");

while (my ($class,$type,$isvirt) = $result->fetchrow_array) {
150 151 152
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'ISVIRT'}   = $isvirt;
153 154 155 156 157 158 159 160 161
    my $typeinfo       = NodeType->Lookup($type);
    $map->{'DELAYCAP'} = $typeinfo->delay_capacity();
    $map->{'VIRTCAP'}  = $typeinfo->virtnode_capacity();
    $map->{'SIMCAP'}   = $typeinfo->simnode_capacity();
    $map->{'SPEED'}    = $typeinfo->frequency();
    $map->{'RAM'}      = $typeinfo->memory();
    $map->{'OSID'}     = $typeinfo->default_osid();
    $map->{'IMAGEABLE'}= $typeinfo->imageable();
    $map->{'TRIVSPEED'}= $typeinfo->trivlink_maxspeed();
162 163 164
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
165 166 167 168 169 170

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

171 172
# Read node_startloc
$result = DBQueryFatal("select node_id,building from node_startloc");
173
while (($node,$building) = $result->fetchrow_array) {
174
    $areamap{$node} .= " area-$building:0";
175 176
}

177 178 179 180 181
#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
182 183 184 185 186 187 188 189 190 191
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
192 193
}

194 195 196 197 198 199 200 201 202 203 204 205
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
206 207 208 209 210 211 212 213 214
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
215
    push @{$auxtypes{$node_id}}, "$type:$count";
216
}
217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
237 238
}

239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
278
$result = DBQueryFatal("select osid from os_info where " .
279
    "nextosid is not null");
280
while (my ($osid) = $result->fetchrow()) {
281 282 283
    #
    # Check to see if they were allowed to use the real OSID
    #
284
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
285 286
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
287 288 289 290 291
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

292
# Print switches
293
if (defined($switchtouse)) {
294
    print "node $switchtouse switch:1 *lan:*\n";
295 296 297 298 299 300 301
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
302
	print "node $switch switch:1 *lan:*\n";
303 304
	$switches{$switch} = 1;
    }
305
}
306

307
# Find available nodes.
308
#
309 310
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
311
#
312

313
# the ordinary free condition for a local node.
314 315
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
316
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
317
                     "  np.eventstate='" . TBDB_NODESTATE_POWEROFF . "' or ".
318
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
319

320 321 322 323 324
if (defined($pid)) {
    $free_condition = "($free_condition and ".
	"(np.reserved_pid is null or np.reserved_pid='$pid'))";
}

325 326 327 328
# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
329
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
330
}
Chad Barb's avatar
Chad Barb committed
331

332 333 334 335 336 337
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

338
$result =
339
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
340
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null), " .
341 342
		 "  np.reserved_pid is not null,np.eventstate, ".
		 "  np.battery_percentage ".
343
		 "from nodes as a ".
344 345
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
346
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
347
		 "left join node_types as t on t.type=a.type ".
348
		 "where $free_condition and ".
349
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
350

351 352 353
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
354 355 356
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
357
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved,
358
	$prereserved,$eventstate,$battery_perc) = $result->fetchrow_array) {
359 360 361
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
362 363 364
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
365
    $node_def_boot_osid{$node} = $def_boot_osid;
366 367 368 369 370 371

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
372 373

    $is_prereserved{$node} = $prereserved;
374 375 376

    $curr_state{$node} = $eventstate;
    $curr_batt{$node} = $battery_perc;
377
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
378

379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403
#
# Find out which nodes are connected to which, so that we can add some special
# features
#
$result = DBQueryFatal("SELECT DISTINCT node_id1, node_id2 " .
                       "  FROM wires");
my %connections = ();
while (my ($node_id1, $node_id2) = $result->fetchrow()) {
    foreach my $nodes ([$node_id1, $node_id2], [$node_id2, $node_id1]) {
        my ($node1, $node2) = @$nodes;
        if ($connections{$node1}) {
            # Check to see if we've already added this one (possible if the
            # nodes appeared in node1,node2 order, then node2,node1
            if (!grep(/^$node2$/, @{$connections{$node1}})) {
                push @{$connections{$node1}}, $node2;
            }
        } else {
            $connections{$node1} = [$node2];
        }
    }
}

#
# Loop through and print out all nodes
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
404
foreach $node (keys(%nodes)) {
405 406 407
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
408
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
409 410
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
411
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
412
    
413
    my @types = ("$type:1");
414 415
    my @features;
    my @flags;
416
    my $needvirtgoo = 0;
417

418 419 420 421 422 423 424 425 426 427
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

428
    # Might be equal, which assign would sum as two, not one!
429 430
    if ($type ne $class) {
	push(@types, "$class:1");
431 432
    }

433
    if (defined($delay_capacity) && $delay_capacity > 0) {
434 435 436 437 438 439
	# Comes from the NS file;
	$delay_capacity = $delaycap_override
	    if (defined($delaycap_override) &&
		$delaycap_override > 0 &&
		$delaycap_override < $delay_capacity);
	
440
	push @types, "delay:$delay_capacity";
441
	push @types, "delay-${type}:$delay_capacity";
442
    }
443

444 445 446
    #
    # Add any auxiliary types
    #
447 448 449
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
450

451 452 453
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
454 455
	}
	else {
456
	    $realtype = $auxtype;
457
	}
458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

474
    if (defined($areamap{$node})) {
475
	push @features, $areamap{$node};
476 477
    }

478
    my $cpu_ram_features_present = 0;
479 480 481 482
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
483
	push @types, "*lan:*";
484 485 486 487
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
488
	# Add CPU and RAM information
489
	$cpu_ram_features_present++;
490 491
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
492
	# Put this silly feature in so that we can try to keep vnodes
493 494 495 496
	# on the same pnode they were before - but only if updating
        if ($exempt_eid) {
            push @features, "${node}:0.0";
        }
497 498
    }

499
    if ($simstuff && defined($simnode_capacity) && $simnode_capacity > 0) {
500 501 502 503 504 505 506 507 508
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
509
	# Add CPU and RAM information
510
	$cpu_ram_features_present++;
511 512 513 514
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
515 516 517 518
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
519 520
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
521
    }
522

523
    # Add features
524
    push(@features, @{$typemap{$type}->{'FEATURES'}});
525 526
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
527 528
    }

529 530 531 532 533 534 535
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }
536 537 538 539 540 541 542 543 544 545 546
    elsif (! $typemap{$type}->{'IMAGEABLE'} &&
	   defined($typemap{$type}->{'OSID'})) {
	#
	# If node is not imageable (and thus no entries in osidtoimageid,
	# then assume it always has its default OSID loaded and ready to
	# go, so that assign will agree to the allocation (assign_wrapper
	# adds a desire that says it has to be running the OSID the user
	# has selected, or the default OSID from the node_types table).
	#
	push @features, map "OS-$_:0", $typemap{$type}->{'OSID'};
    }
547

548 549 550 551 552 553 554 555
    # Add features indicating what this node has connections to
    if ($connections{$node}) {
        my @connected_to  = @{$connections{$node}};
        foreach my $other_end (@connected_to) {
            push(@features,"connected-to-$other_end:0.0");
        }
    }

556 557
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
558
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
559 560 561
	push(@features,"already_reserved:0");
    }

562 563 564 565
    if ($is_prereserved{$node}) {
	push(@features,"prereserved:0.9");
    }

566 567 568 569 570 571 572 573 574
    # For robots, prefer ones that are already powered on and/or won't need to
    # be recharged soon.
    if (defined($curr_state{$node}) && ($curr_state{$node} eq TBDB_NODESTATE_POWEROFF)) {
	push(@features,"poweroff:0.9");
    }
    if (defined($curr_batt{$node})) {
	push(@features,"powerneeded:" . (1.0 - $curr_batt{$node} / 100.0));
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
575 576 577 578 579 580 581 582
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

583 584 585 586 587 588 589 590 591 592 593
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
594
	}
595 596
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
597
    }
598 599 600 601 602

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


603
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
604 605
}

606 607 608 609 610 611 612 613 614 615 616
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
617 618 619 620
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
621
if ($widearea) {
622 623 624 625 626 627 628 629 630 631 632 633 634 635
    #
    # Set up 'the Internet' as a fake switch that all widearea nodes can
    # talk to.
    # Some day, it may make sense to connect control net ports to this
    # switch.
    #
    my $fake_inet_switch = "internet";
    my @inet_protos = ("ipv4");
    print "node $fake_inet_switch ", join(" ",map("*$_:*",@inet_protos)), "\n";
    
    #
    # Note - there is currently an assumption in this query that widearea nodes
    # have only one interface.
    #
636
    $result =
637
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site,".
638
                     "i.card,i.port,i.iface,wn.bwlimit ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
639 640 641 642
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
643
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
644
		     "     wn.node_id=n.node_id ".
645 646
		     "left join interfaces as i on ".
		     "     n.node_id=i.node_id ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
647 648
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
649
    
650 651
    while (($physnode,$ptype,$status,$mpid,$meid,$site,$card,$port,$iface,
            $bwlimit)
Leigh B. Stoller's avatar
Leigh B. Stoller committed
652
	   = $result->fetchrow_array) {
653
	my $class = $typemap{$ptype}->{'CLASS'};
654 655 656 657
	my @types;
	my @features;
	my @flags;

658 659 660 661 662
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
663 664
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
665 666 667
	    push @features, "down:1";
	}

668 669 670 671 672 673 674
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

675 676 677
	#
	# Add any auxiliary types.
	#
678 679
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
680

Leigh B. Stoller's avatar
Leigh B. Stoller committed
681 682 683 684 685
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
686
	    }
687
	    push(@types, $auxinfo);
688 689 690 691 692
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

693 694 695
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

696
	# Add features
697
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
698 699
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
700 701
	}

702 703 704 705 706 707 708 709
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

710 711 712 713 714 715 716 717 718 719
        #
        # Put in a feature indicating whether or not this node has a bandwidth
        # cap
        #
        if (!defined($bwlimit) || $bwlimit eq "-1") {
	    push @features, "nobwlimit:0";
        } else {
	    push @features, "bwlimit:0";
        }

720 721 722 723 724
	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
725 726 727 728 729 730 731 732 733 734 735 736

        #
        # Print out a link to the 'internet'.
        # Note - we make up a fake bandwidth. In the future, maybe we
        # could put something real in there.
        #
        if ($iface) {
            print "link link-$physnode:$iface-$fake_inet_switch:(null) ".
                "$physnode:$physnode/$iface $fake_inet_switch:(null) " .
                "100000 0 0 1 ".
                join(" ",@inet_protos). "\n";
        }
737 738 739
    }
}

740
# Read interfaces
741
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
742
		     " from interfaces");
743
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
744
    $interfacemap{"$node:$card:$port"} = $iface;
745
    if ((defined $type) && ($type ne "")) {
746 747 748 749
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

750 751 752 753 754 755 756 757 758 759 760 761 762 763 764
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
765 766
}

767 768 769 770 771 772 773 774 775 776
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
777 778 779 780 781 782 783
$result = DBQueryFatal("SELECT node_id, iface, card, port, IP ".
		       "FROM interfaces");

while (($node,$iface,$card,$port,$IP) = $result->fetchrow_array) {
    next
	if ($prune && $is_reserved{$node} && (!defined($IP) || $IP eq ""));

784 785 786
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

787
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
788
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
789
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
790
       $result->fetchrow_array) {
791
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
792
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
793 794
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
795 796
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
797 798 799 800

	next
	    if (! exists($interfacecardports{"$node1:$iface1"}));
	
801 802 803 804 805 806
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
807 808
	    $bw = $iface1bw;
	} else {
809 810 811 812 813
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
814
	}
815
	if (defined($switches{$node2})) {
816 817
	    $used_switches{$node2} = 1;
	}
818 819 820 821 822 823 824 825
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
826
		$interconnects{"$node1:$node2"} = new Math::BigInt $bw;
827 828 829 830 831
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
832
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
833 834
	}
    } 
835
}
836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
856
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

886 887
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
888 889 890 891 892
    my $speed = $interconnects{$interconnect};
    # This is really dumb - BigInts like to print out with a leading '+',
    # which we don't want. Stript it off.
    $speed =~ s/^\+|-//;
    print "link link-$interconnect $src $dst $speed 0 0 1 ethernet\n";
893
}
894

895
#
896
# Fake switch. Hardwired for now. 
897
#
898
my @wireless_protos = ("80211", "80211a", "80211b", "80211g", "flex900");
899 900
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
901

902 903
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
904

905 906
    next
    if (!defined($nodes{$node}));
907
	
908 909 910
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
911

912 913 914 915 916 917 918 919
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
920

921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
937 938
	}
    }
939 940 941
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
942 943 944 945
}

exit(0);

946 947 948 949
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
950 951 952 953 954
	if ($interfacemap{"$node:$card:$port"} eq "") {
	    return "(null)";
	} else {
	    return $interfacemap{"$node:$card:$port"};
	}
955 956 957 958 959 960 961 962 963 964 965
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

966 967
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
968
sub get_ifacebw {
969
    ($node,$card,$port,$protocol) = @_;
970
    if (defined($interfacetypes{"$node:$card:$port"})) {
971
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
972 973 974
    }
    else {
	return $default_switchport_speed;
975 976
    }
}
977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}