Experiment.pm.in 92 KB
Newer Older
1 2 3
#!/usr/bin/perl -wT
#
# EMULAB-COPYRIGHT
4
# Copyright (c) 2005-2009 University of Utah and the Flux Group.
5 6 7 8 9 10 11 12 13 14 15 16 17
# All rights reserved.
#
package Experiment;

use strict;
use Exporter;
use vars qw(@ISA @EXPORT);

@ISA    = "Exporter";
@EXPORT = qw ( );

use libdb;
use libtestbed;
18
use User;
19 20
use Project;
use Group;
21
use Node;
22
use Interface;
23
use Logfile;
24 25
use English;
use Data::Dumper;
26
use File::Basename;
27
use overload ('""' => 'Stringify');
28
use libtblog_simple;
29

30 31
use vars qw($EXPT_PRELOAD $EXPT_START $EXPT_SWAPIN $EXPT_SWAPUPDATE
	    $EXPT_SWAPOUT $EXPT_SWAPMOD @physicalTables @virtualTables
32 33
	    @EXPORT_OK);

34 35 36
# Configure variables
my $TB		= "@prefix@";
my $BOSSNODE    = "@BOSSNODE@";
37
my $CONTROL	= "@USERNODE@";
38 39
my $TBOPS       = "@TBOPSEMAIL@";
my $PROJROOT    = "@PROJROOT_DIR@";
40
my $EVENTSYS    = @EVENTSYS@;
41
my $STAMPS      = @STAMPS@;
42
my $TBBASE      = "@TBBASE@";
43 44 45 46 47 48 49 50
my $TEVC	= "$TB/bin/tevc";
my $DBCONTROL   = "$TB/sbin/opsdb_control";
my $RSYNC	= "/usr/local/bin/rsync";
my $MKEXPDIR    = "$TB/libexec/mkexpdir";
my $TBPRERUN    = "$TB/bin/tbprerun";
my $TBSWAP      = "$TB/bin/tbswap";
my $TBREPORT    = "$TB/bin/tbreport";
my $TBEND       = "$TB/bin/tbend";
51
my $DU          = "/usr/bin/du";
52
my $MD5         = "/sbin/md5";
53

54 55 56 57 58 59
# Swap Actions
$EXPT_PRELOAD		= TBDB_STATS_PRELOAD();
$EXPT_START		= TBDB_STATS_START();
$EXPT_SWAPIN		= TBDB_STATS_SWAPIN();
$EXPT_SWAPOUT		= TBDB_STATS_SWAPOUT();
$EXPT_SWAPMOD		= TBDB_STATS_SWAPMODIFY();
60
$EXPT_SWAPUPDATE	= TBDB_STATS_SWAPUPDATE();
61 62 63

# For stats gathering code.
my $EXPT_STARTCLOCK;
64
my $EXPT_RESOURCESHOSED = 0;
65 66

# Why, why, why?
67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136
@EXPORT_OK = qw($EXPT_PRELOAD $EXPT_START $EXPT_SWAPUPDATE
		$EXPT_SWAPIN $EXPT_SWAPOUT $EXPT_SWAPMOD
		@physicalTables  @virtualTables);

#
# List of tables used for experiment removal/backup/restore.
#
@virtualTables  = ("virt_nodes",
		   "virt_lans",
		   "virt_lan_lans",
		   "virt_lan_settings",
		   "virt_lan_member_settings",
		   "virt_trafgens",
		   "virt_agents",
		   "virt_routes",
		   "virt_vtypes",
		   "virt_programs",
		   "virt_node_desires",
		   "virt_node_startloc",
		   "virt_simnode_attributes",
		   "virt_user_environment",
		   "virt_parameters",
		   # vis_nodes is locked during update in prerender, so we
		   # will get a consistent dataset when we backup.
		   "vis_nodes",
		   "vis_graphs",
		   "nseconfigs",
		   "eventlist",
		   "event_groups",
		   "virt_firewalls",
		   "firewall_rules",
		   "virt_tiptunnels",
		   "ipsubnets");

@physicalTables = ("delays",
		   "ipport_ranges",
		   "v2pmap",
		   "linkdelays",
		   "traces",
		   "portmap");

# These are slots in the node table that need to be restored. 
my @nodetable_fields = ("def_boot_osid",
			"def_boot_path",
			"def_boot_cmd_line",
			"temp_boot_osid",
			"next_boot_osid",
			"next_boot_path",
			"next_boot_cmd_line",
			"pxe_boot_path",
			"bootstatus",
			"ready",
			"rpms",
			"deltas",
			"tarballs",
			"startupcmd",
			"startstatus",
			"failureaction",
			"routertype",
			"op_mode",
			"op_mode_timestamp",
			"allocstate",
			"allocstate_timestamp",
			"next_op_mode",
			"osid",
			"ipport_low",
			"ipport_next",
			"ipport_high",
			"sshdport",
			"rtabid");
137

138 139 140 141 142 143 144 145 146 147 148 149 150 151 152
# Hmm, this is silly. 
if ($EVENTSYS) {
    require event;
    import event;
}

# Cache of instances to avoid regenerating them.
my %experiments   = ();
my $debug	  = 0;

# Little helper and debug function.
sub mysystem($)
{
    my ($command) = @_;

153 154 155 156
    my $cwd;
    chomp($cwd = `pwd`);

    print STDERR "Running '$command' in $cwd\n"
157 158 159 160 161 162 163
	if ($debug);
    return system($command);
}

#
# Lookup an experiment and create a class instance to return.
#
164
sub Lookup($$;$)
165
{
166 167 168 169 170 171 172 173 174 175 176 177 178 179 180
    my ($class, $arg1, $arg2) = @_;
    my $idx;

    #
    # A single arg is either an index or a "pid,eid" or "pid/eid" string.
    #
    if (!defined($arg2)) {
	if ($arg1 =~ /^(\d*)$/) {
	    $idx = $1;
	}
	elsif ($arg1 =~ /^([-\w]*),([-\w]*)$/ ||
	       $arg1 =~ /^([-\w]*)\/([-\w]*)$/) {
	    $arg1 = $1;
	    $arg2 = $2;
	}
181 182 183 184 185 186 187 188 189 190
	elsif ($arg1 =~ /^\w+\-\w+\-\w+\-\w+\-\w+$/) {
	    my $result =
		DBQueryWarn("select idx from experiments ".
			    "where eid_uuid='$arg1'");

	    return undef
		if (! $result || !$result->numrows);

	    ($idx) = $result->fetchrow_array();
	}
191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211
	else {
	    return undef;
	}
    }
    elsif (! (($arg1 =~ /^[-\w]*$/) && ($arg2 =~ /^[-\w]*$/))) {
	return undef;
    }

    #
    # Two args means lookup by pid,eid instead of exptidx.
    #
    if (defined($arg2)) {
	my $result =
	    DBQueryWarn("select idx from experiments ".
			"where pid='$arg1' and eid='$arg2'");

	return undef
	    if (! $result || !$result->numrows);

	($idx) = $result->fetchrow_array();
    }
212 213

    # Look in cache first
214 215
    return $experiments{"$idx"}
        if (exists($experiments{"$idx"}));
216 217
    
    my $query_result =
218 219 220
	DBQueryWarn("select e.*,i.parent_guid,t.guid from experiments as e ".
		    "left join experiment_templates as t on ".
		    "     t.exptidx=e.idx ".
221 222 223
		    "left join experiment_template_instances as i on ".
		    "     i.exptidx=e.idx ".
		    "where e.idx='$idx'");
224 225 226 227 228 229

    return undef
	if (!$query_result || !$query_result->numrows);

    my $self         = {};
    $self->{'EXPT'}  = $query_result->fetchrow_hashref();
230 231
    # An Instance?
    $self->{'ISINSTANCE'} = defined($self->{'EXPT'}->{'parent_guid'});
232 233
    # The experiment underlying a template.
    $self->{'ISTEMPLATE'} = defined($self->{'EXPT'}->{'guid'});
234 235 236 237 238 239 240 241 242

    $query_result =
	DBQueryWarn("select * from experiment_stats where exptidx='$idx'");
	
    return undef
	if (!$query_result || !$query_result->numrows);
    
    $self->{'STATS'} = $query_result->fetchrow_hashref();
    
243 244 245 246 247 248
    my $rsrcidx = $self->{'STATS'}->{'rsrcidx'};

    $query_result =
	DBQueryWarn("select * from experiment_resources ".
		    "where idx='$rsrcidx'");
	
Leigh B. Stoller's avatar
Leigh B. Stoller committed
249
    return undef
250 251 252
	if (!$query_result || !$query_result->numrows);
    
    $self->{'RSRC'} = $query_result->fetchrow_hashref();
253

254 255 256
    # Virt Experiment; load lazy.
    $self->{'VIRTEXPT'} = undef;

257 258 259
    bless($self, $class);
    
    # Add to cache. 
260
    $experiments{"$idx"} = $self;
261 262 263 264
    
    return $self;
}
# accessors
265 266 267
sub field($$)     { return ((! ref($_[0])) ? -1 : $_[0]->{'EXPT'}->{$_[1]}); }
sub stats($$)     { return ((! ref($_[0])) ? -1 : $_[0]->{'STATS'}->{$_[1]});}
sub resources($$) { return ((! ref($_[0])) ? -1 : $_[0]->{'RSRC'}->{$_[1]}); }
268
sub dbrow($$)     { return $_[0]->{'EXPT'}; }
269

270 271 272 273 274 275
sub pid($)		{ return field($_[0], 'pid'); }
sub gid($)		{ return field($_[0], 'gid'); }
sub pid_idx($)		{ return field($_[0], 'pid_idx'); }
sub gid_idx($)		{ return field($_[0], 'gid_idx'); }
sub eid($)		{ return field($_[0], 'eid'); }
sub idx($)		{ return field($_[0], 'idx'); }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
276 277
sub uuid($)		{ return field($_[0], 'eid_uuid'); }
sub eid_uuid($)		{ return field($_[0], 'eid_uuid'); }
278
sub description($)	{ return field($_[0], 'expt_name'); }
279 280 281 282 283
sub path($)		{ return field($_[0], 'path'); }
sub state($)		{ return field($_[0], 'state'); }
sub batchstate($)	{ return field($_[0], 'batchstate'); }
sub batchmode($)	{ return field($_[0], 'batchmode'); }
sub rsrcidx($)		{ return stats($_[0], 'rsrcidx'); }
284
sub lastrsrc($)		{ return stats($_[0], 'lastrsrc'); }
285 286 287 288 289 290 291
sub creator($)		{ return field($_[0], 'expt_head_uid');}
sub canceled($)		{ return field($_[0], 'canceled'); }
sub locked($)		{ return field($_[0], 'expt_locked'); }
sub elabinelab($)	{ return field($_[0], 'elab_in_elab');}
sub elabinelab_eid($)   { return field($_[0], 'elabinelab_eid');}
sub elabinelab_exptidx($){return field($_[0], 'elabinelab_exptidx');}
sub lockdown($)		{ return field($_[0], 'lockdown'); }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
292
sub geniflags($)	{ return field($_[0], 'geniflags'); }
293 294 295 296 297 298
sub created($)		{ return field($_[0], 'expt_created'); }
sub swapper($)		{ return field($_[0], 'expt_swap_uid');}
sub swappable($)	{ return field($_[0], 'swappable');}
sub idleswap($)		{ return field($_[0], 'idleswap');}
sub autoswap($)		{ return field($_[0], 'autoswap');}
sub noswap_reason($)	{ return field($_[0], 'noswap_reason');}
299 300 301 302
sub noidleswap_reason($){ return field($_[0], 'noidleswap_reason');}
sub idleswap_timeout($) { return field($_[0], 'idleswap_timeout');}
sub autoswap_timeout($) { return field($_[0], 'autoswap_timeout');}
sub prerender_pid($)    { return field($_[0], 'prerender_pid');}
303 304
sub dpdb($)		{ return field($_[0], 'dpdb');}
sub dpdbname($)         { return field($_[0], 'dpdbname');}
305
sub dpdbpassword($)     { return field($_[0], 'dpdbpassword');}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
306
sub instance_idx($)     { return field($_[0], 'instance_idx'); }
307 308
sub creator_idx($)      { return field($_[0], 'creator_idx');}
sub swapper_idx($)      { return field($_[0], 'swapper_idx');}
309 310 311
sub use_ipassign($)     { return field($_[0], 'use_ipassign');}
sub ipassign_args($)    { return field($_[0], 'ipassign_args');}
sub security_level($)   { return field($_[0], 'security_level');}
312 313
sub linktest_pid($)     { return field($_[0], 'linktest_pid');}
sub linktest_level($)   { return field($_[0], 'linktest_level');}
314
sub logfile($)          { return field($_[0], 'logfile');}
315
sub paniced($)          { return field($_[0], 'paniced');}
316
sub archive_idx($)	{ return stats($_[0], 'archive_idx'); }
317 318
sub swapin_count($)	{ return stats($_[0], 'swapin_count'); }
sub destroyed($)	{ return stats($_[0], 'destroyed'); }
319
sub archive_tag($)	{ return resources($_[0], 'archive_tag'); }
320 321 322 323
sub thumbnail($)	{ return resources($_[0], 'thumbnail'); }
sub swapin_time($)	{ return resources($_[0], 'swapin_time'); }
sub swapout_time($)	{ return resources($_[0], 'swapout_time'); }
sub lastidx($)	        { return resources($_[0], 'lastidx'); }
324
sub input_data_idx($)   { return resources($_[0], 'input_data_idx'); }
325 326

#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
327
# Lookup an experiment given an experiment index.
328 329 330 331 332
#
sub LookupByIndex($$)
{
    my ($class, $exptidx) = @_;

333
    return Experiment->Lookup($exptidx);
334 335
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
336 337 338 339 340 341 342 343 344 345 346 347 348 349
#
# Equality test. Not strictly necessary in perl, but good form.
#
sub SameExperiment($$)
{
    my ($self, $other) = @_;

    # Must be a real reference. 
    return -1
	if (! (ref($self) && ref($other)));

    return $self->idx() == $other->idx();
}

350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371
#
# All active experiments.
#
sub AllActive($)
{
    my ($class) = @_;
    my @result  = ();
    
    my $query_result =
	DBQueryFatal("select idx from experiments where state='active'");

    while (my ($idx) = $query_result->fetchrow_array()) {
	my $experiment = Experiment->Lookup($idx);

	if (!defined($experiment)) {
	    print STDERR "Experiment::AllActive: No object for $idx!\n";
	}
	push(@result, $experiment);
    }
    return @result;
}

372 373 374 375 376 377 378 379 380 381 382
#
# All experiments for a particular user. Class method.
#
sub UserExperimentList($$$)
{
    my ($class, $user, $plist) = @_;
    my @result  = ();
    my $uid_idx = $user->uid_idx();
    
    my $query_result =
	DBQueryWarn("select idx from experiments ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
383 384
		    "where creator_idx='$uid_idx' or ".
		    "      (swapper_idx='$uid_idx' and ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
385
		    "       state!='" . EXPTSTATE_SWAPPED() . "')");
386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402
    return -1
	if (! $query_result);

    while (my ($idx) = $query_result->fetchrow_array()) {
	my $experiment = Experiment->Lookup($idx);

	if (!defined($experiment)) {
	    print STDERR "Experiment::UserExperimentList: ".
		"No object for $idx!\n";
	    return -1;
	}
	push(@result, $experiment);
    }
    @$plist = @result;
    return 0;
}

403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418
# This is needed a lot.
sub unix_gid($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $group = $self->GetGroup();
    return -1
	if (!defined($group));

    return $group->unix_gid();
}

419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434
#
# LockTables simple locks the given tables, and then refreshes the
# experiment instance (thereby getting the data from the DB after
# the tables are locked).
#
sub LockTables($;$)
{
    my ($self, $spec) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    $spec  = "experiments write"
	if (!defined($spec));
    $spec .= ", experiment_stats read";
435
    $spec .= ", experiment_resources read";
436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454
    
    DBQueryWarn("lock tables $spec")
	or return -1;
	
    return $self->Refresh();
}
sub UnLockTables($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    DBQueryWarn("unlock tables")
	or return -1;
    return 0;
}

455 456 457 458 459 460
#
# Create a new experiment. This installs the new record in the DB,
# and returns an instance. There is some bookkeeping along the way.
#
sub Create($$$$)
{
461
    my ($class, $group, $eid, $argref) = @_;
462
    my $exptidx;
463
    my $uuid;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
464
    my $now = time();
465 466

    return undef
467 468 469 470 471 472
	if (ref($class) || !ref($group));

    my $pid     = $group->pid();
    my $gid     = $group->gid();
    my $pid_idx = $group->pid_idx();
    my $gid_idx = $group->gid_idx();
473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564

    #
    # The pid/eid has to be unique, so lock the table for the check/insert.
    #
    DBQueryWarn("lock tables experiments write, ".
		"            experiment_stats write, ".
		"            experiment_resources write, ".
		"            emulab_indicies write, ".
		"            testbed_stats read")
	or return undef;

    my $query_result =
	DBQueryWarn("select pid,eid from experiments ".
		    "where eid='$eid' and pid='$pid'");

    if ($query_result->numrows) {
	DBQueryWarn("unlock tables");
	tberror("Experiment $eid in project $pid already exists!");
	return undef;
    }

    #
    # Grab the next highest index to use. We used to use an auto_increment
    # field in the table, but if the DB is ever "dropped" and recreated,
    # it will reuse indicies that are crossed referenced in the other two
    # tables.
    #
    $query_result = 
	DBQueryWarn("select idx from emulab_indicies ".
		    "where name='next_exptidx'");

    if (!$query_result) {
	DBQueryWarn("unlock tables");
	return undef;
    }

    # Seed with a proper value.
    if (! $query_result->num_rows) {
	$query_result =
	    DBQueryWarn("select MAX(exptidx) + 1 from experiment_stats");

	if (!$query_result) {
	    DBQueryWarn("unlock tables");
	    return undef;
	}
	($exptidx) = $query_result->fetchrow_array();

	# First ever experiment!
	$exptidx = 1
	    if (!defined($exptidx));

	if (! DBQueryWarn("insert into emulab_indicies (name, idx) ".
			  "values ('next_exptidx', $exptidx)")) {
	    DBQueryWarn("unlock tables");
	    return undef;
	}

    }
    else {
	($exptidx) = $query_result->fetchrow_array();
    }
    my $nextidx = $exptidx + 1;
    
    if (! DBQueryWarn("update emulab_indicies set idx='$nextidx' ".
		      "where name='next_exptidx'")) {
	DBQueryWarn("unlock tables");
	return undef;
    }

    #
    # Lets be really sure!
    #
    foreach my $table ("experiments", "experiment_stats",
		       "experiment_resources", "testbed_stats") {

	my $slot = (($table eq "experiments") ? "idx" : "exptidx");
	
	$query_result =
	    DBQueryWarn("select * from $table where ${slot}=$exptidx");

	if (! $query_result) {
	    DBQueryWarn("unlock tables");
	    return undef;
	}
	if ($query_result->numrows) {
	    DBQueryWarn("unlock tables");
	    tberror("Experiment index $exptidx exists in $table; ".
		    "this is bad!");
	    return undef;
	}
    }

565
    # And a UUID (universally unique identifier).
566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582
    if (exists($argref->{'eid_uuid'})) {
	$uuid = $argref->{'eid_uuid'};
	delete($argref->{'eid_uuid'});

	if (! ($uuid =~ /^\w+\-\w+\-\w+\-\w+\-\w+$/)) {
	    DBQueryWarn("unlock tables");
	    print "*** WARNING: Bad format in UUID!\n";
	    return undef;
	}
    }
    else {
	$uuid = NewUUID();
	if (!defined($uuid)) {
	    DBQueryWarn("unlock tables");
	    print "*** WARNING: Could not generate a UUID!\n";
	    return undef;
	}
583 584
    }

585 586 587 588
    #
    # Lets be real sure that the UUID is really unique.
    #
    $query_result =
589
	DBQueryWarn("select pid,eid from experiments ".
590 591 592 593 594 595 596 597 598 599 600 601
		    "where eid_uuid='$uuid'");
    if (! $query_result) {
	DBQueryWarn("unlock tables");
	return undef;
    }
    if ($query_result->numrows) {
	DBQueryWarn("unlock tables");
	tberror("Experiment uuid $uuid already exists; ".
		"this is bad!");
	return undef;
    }

602 603 604 605 606 607 608 609 610 611 612 613
    #
    # Insert the record. This reserves the pid/eid for us. 
    #
    # Some fields special cause of quoting.
    #
    my $description = DBQuoteSpecial($argref->{'expt_name'});
    delete($argref->{'expt_name'});
    my $noswap_reason = DBQuoteSpecial($argref->{'noswap_reason'});
    delete($argref->{'noswap_reason'});
    my $noidleswap_reason = DBQuoteSpecial($argref->{'noidleswap_reason'});
    delete($argref->{'noidleswap_reason'});

Leigh B. Stoller's avatar
Leigh B. Stoller committed
614 615 616 617
    # we override this below
    delete($argref->{'idx'})
	if (exists($argref->{'idx'}));

618 619 620 621
    my $query = "insert into experiments set ".
	join(",", map("$_='" . $argref->{$_} . "'", keys(%{$argref})));

    # Append the rest
Leigh B. Stoller's avatar
Leigh B. Stoller committed
622
    $query .= ",expt_created=FROM_UNIXTIME('$now')";
623
    $query .= ",expt_locked=now(),pid='$pid',eid='$eid',eid_uuid='$uuid'";
624
    $query .= ",pid_idx='$pid_idx',gid='$gid',gid_idx='$gid_idx'";
625 626 627
    $query .= ",expt_name=$description";
    $query .= ",noswap_reason=$noswap_reason";
    $query .= ",noidleswap_reason=$noidleswap_reason";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
628
    $query .= ",idx=$exptidx";
629 630 631 632 633 634 635

    if (! DBQueryWarn($query)) {
	DBQueryWarn("unlock tables");
	tberror("Error inserting experiment record for $pid/$eid!");	
	return undef;
    }

636 637 638 639
    my $creator_uid = $argref->{'expt_head_uid'};
    my $creator_idx = $argref->{'creator_idx'};
    my $batchmode   = $argref->{'batchmode'};

640 641 642 643
    #
    # Create an experiment_resources record for the above record.
    #
    $query_result =
644 645 646
	DBQueryWarn("insert into experiment_resources ".
		    "(tstamp, exptidx, uid_idx) ".
		    "values (FROM_UNIXTIME('$now'), $exptidx, $creator_idx)");
647 648 649 650 651 652 653

    if (!$query_result) {
	DBQueryWarn("delete from experiments where pid='$pid' and eid='$eid'");
	DBQueryWarn("unlock tables");
	tberror("Error inserting experiment resources record for $pid/$eid!");
	return undef;
    }
654
    my $rsrcidx     = $query_result->insertid;
655
    
656 657 658 659
    #
    # Now create an experiment_stats record to match.
    #
    if (! DBQueryWarn("insert into experiment_stats ".
660
		      "(eid, pid, creator, creator_idx, gid, created, ".
661 662
		      " batch, exptidx, rsrcidx, pid_idx, gid_idx, eid_uuid, ".
		      " last_activity) ".
663 664
		      "values('$eid', '$pid', '$creator_uid', '$creator_idx',".
		      "       '$gid', FROM_UNIXTIME('$now'), ".
665
		      "        $batchmode, $exptidx, $rsrcidx, ".
666 667
		      "        $pid_idx, $gid_idx, '$uuid', ".
		      "        FROM_UNIXTIME('$now'))")) {
668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699
	DBQueryWarn("delete from experiments where pid='$pid' and eid='$eid'");
	DBQueryWarn("delete from experiment_resources where idx=$rsrcidx");
	DBQueryWarn("unlock tables");
	tberror("Error inserting experiment stats record for $pid/$eid!");
	return undef;
    }

    #
    # Safe to unlock; all tables consistent.
    #
    if (! DBQueryWarn("unlock tables")) {
	DBQueryWarn("delete from experiments where pid='$pid' and eid='$eid'");
	DBQueryWarn("delete from experiment_resources where idx=$rsrcidx");
	DBQueryWarn("delete from experiment_stats where exptidx=$exptidx");
	tberror("Error unlocking tables!");
	return undef
    }

    return Experiment->Lookup($pid, $eid);
}

#
# Delete experiment. Optional purge argument says to remove all trace
# (typically, the stats are kept).
#
sub Delete($;$)
{
    my ($self, $purge) = @_;

    return -1
	if (! ref($self));

700 701 702
    my $pid     = $self->pid();
    my $eid     = $self->eid();
    my $exptidx = $self->idx();
703 704
    my $workdir = $self->WorkDir();
    my $userdir = $self->UserDir();
705 706 707 708

    $purge = 0
	if (!defined($purge));

709 710
    $self->UnBindNonLocalUsers();

711 712 713 714 715 716 717 718 719 720 721
    #
    # Try to remove experiment directory. We allow for it not being there
    # cause we often run the tb programs directly. We also allow for not
    # having permission, in the case that an admin type is running this,
    # in which case it won't be allowed cause of directory permissions. Thats
    # okay since admin types should rarely end experiments in other projects.
    #
    print "Removing experiment directories ... \n";
    if (defined($userdir) && system("/bin/rm -rf $userdir")) {
	print "*** WARNING: Not able to remove $userdir\n";
	print "             Someone will need to do this by hand.\n";
722

723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739
	# NFS errors usually the result. Sometimes its cause there is
	# someone in the directory, so its being held open.
        libtestbed::SENDMAIL($TBOPS,
			     "Experiment::Delete: Could not remove directory",
			     "Could not remove $userdir.\n".
			     "Someone will need to do this by hand.\n");
    }
    if (system("/bin/rm -rf $workdir")) {
	print "*** WARNING: Not able to remove $workdir\n";
	print "             Someone will need to do this by hand.\n";
    }
    # Yuck.
    if ($pid ne $self->gid()) {
	my $eidlink = "$PROJROOT/$pid/exp/$eid";
	unlink($eidlink)
	    if (-l $eidlink);
    }
740 741 742 743
    my $logfile = $self->GetLogFile();
    if (defined($logfile)) {
	$logfile->Delete();
    }
744 745 746 747
    libArchive::TBDeleteExperimentArchive($pid, $eid);

    DBQueryWarn("DELETE from experiments ".
		"WHERE eid='$eid' and pid='$pid'");
748

749 750 751
    # Delete from cache. 
    delete($experiments{"$exptidx"});

752 753 754 755 756 757 758 759 760
    #
    # Mark experiment destroyed. This is a backup to End() below.
    #
    if (! defined($self->destroyed())) {
	DBQueryWarn("update experiment_stats set ".
		    "   destroyed=now() ".
		    "where exptidx=$exptidx");
	$self->Refresh();
    }
761
    return 0
762 763 764
	if (! $purge);
    
    #
765
    # Now we can clean up the stats and resource records. 
766 767
    #
    my $rsrcidx = $self->rsrcidx();
768 769 770 771 772 773 774

    $self->DeleteInputFiles();

    DBQueryWarn("DELETE from experiment_pmapping ".
		"WHERE rsrcidx=$rsrcidx")
	if (defined($rsrcidx) && $rsrcidx);

775
    DBQueryWarn("DELETE from experiment_resources ".
776
		"WHERE idx=$rsrcidx")
Leigh B. Stoller's avatar
Leigh B. Stoller committed
777
	if (defined($rsrcidx) && $rsrcidx);
778

779 780 781 782 783 784 785 786 787 788
    DBQueryWarn("DELETE from testbed_stats ".
		"WHERE exptidx=$exptidx");

    # This must be last cause it provides the unique exptidx above.
    DBQueryWarn("DELETE from experiment_stats ".
		"WHERE eid='$eid' and pid='$pid' and exptidx=$exptidx");

    return 0;
}

789 790 791 792 793 794 795 796 797
#
# Flush from our little cache, as for the expire daemon.
#
sub Flush($)
{
    my ($self) = @_;

    delete($experiments{$self->idx()});
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
798 799 800 801 802 803
sub FlushAll($)
{
    my ($class) = @_;

    %experiments = ();
}
804

805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889
#
# Add an input file to the template. The point of this is to reduce
# duplication by taking an md5 of the input file, and sharing that
# record/file.
# 
sub AddInputFile($$;$)
{
    my ($self, $inputfile, $isnsfile) = @_;
    my $input_data_idx;
    my $isnew = 0;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    $isnsfile = 0
	if (! defined($isnsfile));

    return -1
	if (! -r $inputfile);

    my $data_string = `cat $inputfile`;
    return -1
	if ($?);

    my $exptidx  = $self->idx();
    my $rsrcidx  = $self->rsrcidx();

    if ($data_string) {
	# As you can see, we md5 the raw data.
	$data_string = DBQuoteSpecial($data_string);
	if (length($data_string) >= DBLIMIT_NSFILESIZE()) {
	    tberror("Input file is too big (> " . DBLIMIT_NSFILESIZE() . ")!");
	    return -1;
	}

	#
	# Grab an MD5 of the file to see if we already have a copy of it.
	# Avoids needless duplication.
	#
	my $md5 = `$MD5 -q $inputfile`;
	chomp($md5);

	DBQueryWarn("lock tables experiment_input_data write, ".
		    "            experiment_inputs write, ".
		    "            experiment_resources write")
	    or return -1;

	my $query_result =
	    DBQueryWarn("select idx from experiment_input_data ".
			"where md5='$md5'");

	if (!$query_result) {
	    DBQueryWarn("unlock tables");
	    return -1;
	}

	if ($query_result->numrows) {
	    ($input_data_idx) = $query_result->fetchrow_array();
	    $isnew = 0;
	}
	else {
	    $query_result =
		DBQueryWarn("insert into experiment_input_data ".
			    "(idx, md5, input) ".
			    "values (NULL, '$md5', $data_string)");
	    
	    if (!$query_result) {
		DBQueryWarn("unlock tables");
		return -1;
	    }
	    $input_data_idx = $query_result->insertid;
	    $isnew = 1;
	}
	if (! DBQueryWarn("insert into experiment_inputs ".
			  " (rsrcidx, exptidx, input_data_idx) values ".
			  " ($rsrcidx, $exptidx, '$input_data_idx')")) {
	    DBQueryWarn("delete from experiment_input_data ".
			"where idx='$input_data_idx'")
		if ($isnew);
	    DBQueryWarn("unlock tables");
	    return -1;
	}
	if ($isnsfile &&
	    $self->TableUpdate("experiment_resources",
890
			       "input_data_idx='$input_data_idx'",
Leigh B. Stoller's avatar
Leigh B. Stoller committed
891
			       "idx='$rsrcidx'") != 0) {
892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946
	    DBQueryWarn("unlock tables");
	    return -1;
	}
	DBQueryWarn("unlock tables");
    }
    return 0;
}

#
# Delete the input files, but only if not in use.
#
sub DeleteInputFiles($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $rsrcidx = $self->rsrcidx();
    my $nsidx   = $self->input_data_idx();

    DBQueryWarn("lock tables experiment_input_data write, ".
		"            experiment_resources write, ".
		"            experiment_inputs write")
	or return -1;

    #
    # Get all input files for this rsrc record.
    #
    my $query_result =
	DBQueryWarn("select input_data_idx from experiment_inputs ".
		    "where rsrcidx='$rsrcidx'");
    goto bad
	if (! $query_result);
    goto done
	if (! $query_result->numrows);

    while (my ($input_data_idx) = $query_result->fetchrow_array()) {
	#
	# Delete but only if not in use.
	#
	my $query_result =
	    DBQueryWarn("select count(rsrcidx) from experiment_inputs ".
			"where input_data_idx='$input_data_idx' and ".
			"      rsrcidx!='$rsrcidx'");
	goto bad
	    if (! $query_result);

	DBQueryWarn("delete from experiment_inputs ".
		    "where input_data_idx='$input_data_idx'")
	    or goto bad;

	if (defined($nsidx) && $nsidx == $input_data_idx) {
	    DBQueryWarn("update experiment_resources set input_data_idx=NULL ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
947
			"where idx='$rsrcidx'")
948 949
		or goto bad;
	}
950 951 952 953 954 955
	next
	    if ($query_result->numrows);

	DBQueryWarn("delete from experiment_input_data ".
		    "where idx='$input_data_idx'")
	    or goto bad;
956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987
    }
  done:
    DBQueryWarn("unlock tables");
    return 0;

  bad:
    DBQueryWarn("unlock tables");
    return 1;
}

#
# Grab an input file.
#
sub GetInputFile($$$)
{
    my ($self, $idx, $pref) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $query_result =
	DBQueryWarn("select input from experiment_input_data ".
		    "where idx='$idx'");
    return -1
	if (! $query_result || !$query_result->numrows);

    my ($nsfile) = $query_result->fetchrow_array();
    $$pref = $nsfile;
    return 0;
}

988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011
#
# Get the virt experiment object;
#
sub GetVirtExperiment($)
{
    my ($self) = @_;

    return undef
	if (! ref($self));

    return $self->{'VIRTEXPT'}
        if (defined($self->{'VIRTEXPT'}));

    require VirtExperiment;

    my $virtexperiment = VirtExperiment->Lookup($self);
    if (!defined($virtexperiment)) {
	print STDERR "*** Could not get virtual experiment object for $self\n";
	return undef;
    }
    $self->{'VIRTEXPT'} = $virtexperiment;
    return $virtexperiment;
}

1012 1013 1014 1015 1016 1017 1018 1019 1020 1021
#
# Refresh a class instance by reloading from the DB.
#
sub Refresh($)
{
    my ($self) = @_;

    return -1
	if (! ref($self));

1022
    my $idx = $self->idx();
1023

1024
    my $query_result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1025
	DBQueryWarn("select * from experiments where idx=$idx");
1026 1027 1028 1029

    return -1
	if (!$query_result || !$query_result->numrows);

1030
    $self->{'EXPT'}       = $query_result->fetchrow_hashref();
1031
    $self->{'VIRTEXPT'}   = undef;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1032 1033
    $self->{'ISINSTANCE'} = undef;
    $self->{'ISTEMPLATE'} = undef;
1034 1035 1036 1037 1038 1039 1040 1041 1042

    $query_result =
	DBQueryWarn("select * from experiment_stats where exptidx='$idx'");
	
    return -1
	if (!$query_result || !$query_result->numrows);
    
    $self->{'STATS'} = $query_result->fetchrow_hashref();

1043 1044 1045 1046 1047 1048 1049 1050 1051 1052
    my $rsrcidx = $self->rsrcidx();

    $query_result =
	DBQueryWarn("select * from experiment_resources ".
		    "where idx='$rsrcidx'");
	
    return -1
	if (!$query_result || !$query_result->numrows);
    
    $self->{'RSRC'} = $query_result->fetchrow_hashref();
1053 1054 1055
    return 0;
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080
#
# Perform some updates ...
#
sub Update($$)
{
    my ($self, $argref) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $pid = $self->pid();
    my $eid = $self->eid();

    my $query = "update experiments set ".
	join(",", map("$_='" . $argref->{$_} . "'", keys(%{$argref})));

    $query .= " where pid='$pid' and eid='$eid'";

    return -1
	if (! DBQueryWarn($query));

    return Refresh($self);
}

1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098
#
# Worker class method to change experiment info.
# Assumes most argument checking was done elsewhere.
#
sub EditExp($$$$$$)
{
    my ($class, $experiment, $user, $doemail, $argref, $usrerr_ref) = @_;

    my %mods;
    my $noreport;
    my %updates;

    #
    # Converting the batchmode is tricky, but we can let the DB take care
    # of it by requiring that the experiment not be locked, and it be in
    # the swapped state. If the query fails, we know that the experiment
    # was in transition.
    #
1099 1100

    if (exists($argref->{"batchmode"}) && $experiment->batchmode() != $argref->{"batchmode"}) {
1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260
	my $success  = 0;

	my $batchmode;
	if ($argref->{"batchmode"} ne "1") {
	    $batchmode = 0;
	    $argref->{"batchmode"} = 0;
	}
	else {
	    $batchmode = 1;
	    $argref->{"batchmode"} = 1;
	}

	if ($experiment->SetBatchMode($batchmode) != 0) {
	    $$usrerr_ref = "Batch Mode: Experiment is running or in transition; ".
		"try again later";
	    return undef;
	}
	$mods{"batchmode"} = $batchmode;
    }

    #
    # Now update the rest of the information in the DB.
    #

    # Name change for experiment description.
    if (exists($argref->{"description"})) {
	$updates{"expt_name"} = ($mods{"description"} = $argref->{"description"});
    }

    # Note that timeouts are in hours in the UI, but in minutes in the DB. 
    if (exists($argref->{"idleswap_timeout"})) {
	$updates{"idleswap_timeout"} = 60 * 
	    ($mods{"idleswap_timeout"} = $argref->{"idleswap_timeout"});
    }
    if (exists($argref->{"autoswap_timeout"})) {
	$updates{"autoswap_timeout"} = 60 * 
	    ($mods{"autoswap_timeout"} = $argref->{"autoswap_timeout"});
    }

    foreach my $col ("idle_ignore", "swappable", "noswap_reason",
		     "idleswap", "noidleswap_reason", "autoswap", "savedisk",
		     "cpu_usage", "mem_usage", "linktest_level") {
	# Copy args we want so that others can't get through.
	if (exists($argref->{$col})) {
	    $updates{$col} = $mods{$col} = $argref->{$col};
	}
    }

    # Save state before change for the email message below.
    my $olds = ($experiment->swappable() ? "Yes" : "No");
    my $oldsr= $experiment->noswap_reason();
    my $oldi = ($experiment->idleswap() ? "Yes" : "No");
    my $oldit= $experiment->idleswap_timeout() / 60.0;
    my $oldir= $experiment->noidleswap_reason();
    my $olda = ($experiment->autoswap() ? "Yes" : "No");
    my $oldat= $experiment->autoswap_timeout() / 60.0;

    if (keys %updates) {
	if ($experiment->Update(\%updates)) {
	    return undef;
	}
    }

    my $creator = $experiment->creator();
    my $swapper = $experiment->swapper();
    my $uid = $user->uid();
    my $pid = $experiment->pid();
    my $eid = $experiment->eid();

    if (!keys %mods) {
	if (!$noreport) {
	    # Warn the user that the submit button was pressed with no effect.
	    $$usrerr_ref = "Submit: Nothing changed";
	    return undef;
	}
    }
    # Do not send this email if the user is an administrator
    # (adminmode does not matter), and is changing an expt he created
    # or swapped in. Pointless email.
    elsif ( $doemail &&
	     ! ($user->admin() &&
		($uid eq $creator || $uid eq $swapper)) ) {

	# Send an audit e-mail reporting what is being changed.
	my $target_creator = $experiment->GetCreator();
	my $target_swapper = $experiment->GetSwapper();

	my $user_name  = $user->name();
	my $user_email = $user->email();
	my $cname      = $target_creator->name();
	my $cemail     = $target_creator->email();
	my $sname      = $target_swapper->name();
	my $semail     = $target_swapper->email();

	my $s    = ($experiment->swappable() ? "Yes" : "No");
	my $sr   = $experiment->noswap_reason();
	my $i    = ($experiment->idleswap() ? "Yes" : "No");
	my $it   = $experiment->idleswap_timeout() / 60.0;
	my $ir   = $experiment->noidleswap_reason();
	my $a    = ($experiment->autoswap() ? "Yes" : "No");
	my $at   = $experiment->autoswap_timeout() / 60.0;

	my $msg = "\n".
	    "The swap settings for $pid/$eid have changed\n".
	    "\nThe old settings were:\n".
	    "Swappable:\t$olds\t($oldsr)\n".
	    "Idleswap:\t$oldi\t(after $oldit hrs)\t($oldir)\n".
	    "MaxDuration:\t$olda\t(after $oldat hrs)\n".
	    "\nThe new settings are:\n".
	    "Swappable:\t$s\t($sr)\n".
	    "Idleswap:\t$i\t(after $it hrs)\t($ir)\n".
	    "MaxDuration:\t$a\t(after $at hrs)\n".
	    "\nCreator:\t$creator ($cname <$cemail>)\n".
	    "Swapper:\t$swapper ($sname <$semail>)\n".
            "\nDifferences were:\n";
	my @report = 
	    ("Description:description", "Idle Ignore:idle_ignore",
	     "Swappable:swappable", "Noswap Reason:noswap_reason",
	     "Idleswap:idleswap", "Idleswap Timeout:idleswap_timeout",
	     "Noidleswap Reason:noidleswap_reason", "Autoswap:autoswap",
	     "Autoswap timeout:autoswap_timeout", "Savedisk:savedisk",
	     "Cpu Usage:cpu_usage", "Mem Usage:mem_usage",
	     "Batch Mode:batchmode", "Linktest Level:linktest_level");
	foreach my $line (@report) {
	    my ($label, $field) = split /:/, $line;
	    if (exists($mods{$field})) {
		$msg .= sprintf "%-20s%s\n", $label .":", $mods{$field};
	    }
	}
	$msg .= "\n".
	   "\nIf it is necessary to change these settings, ".
	   "please reply to this message \nto notify the user, ".
	   "then change the settings here:\n\n".
	   "$TBBASE/showexp.php3?pid=$pid&eid=$eid\n\n".
	   "Thanks,\nTestbed WWW\n";

	SENDMAIL("$user_name <$user_email>",
		 "$pid/$eid swap settings changed",
		 $msg, TBMAIL_OPS(), sprintf("Bcc: %s\nErrors-To:%s", 
					     TBMAIL_AUDIT(), TBMAIL_WWW()));
    }
    return 1;
}

sub SetBatchMode($$) {
    my ($self, $mode) = @_;

    my $reqstate = EXPTSTATE_SWAPPED();
    my $idx      = $self->idx();
    $mode        = ($mode ? 1 : 0);

    DBQueryFatal("lock tables experiments write");

    my $query_result =
	DBQueryFatal("update experiments set ".
		     "   batchmode=$mode ".
		     "where idx='$idx' and ".
		     "     expt_locked is NULL and state='$reqstate'");

    my $success = $query_result->numrows;    # XXX Was DBAffectedRows().
Russ Fish's avatar
Russ Fish committed
1261
    DBQueryFatal("unlock tables");
1262 1263 1264 1265

    return ($success ? 0 : -1);
}

1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278
#
# Stringify for output.
#
sub Stringify($)
{
    my ($self) = @_;
    
    my $pid   = $self->pid();
    my $eid   = $self->eid();

    return "[Experiment: $pid/$eid]";
}

1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333
#
# Generic function to look up some table values given a set of desired
# fields and some conditions. Pretty simple, not widely useful, but it
# helps to avoid spreading queries around then we need to. 
#
sub TableLookUp($$$;$)
{
    my ($self, $table, $fields, $conditions) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));
    
    my $exptidx = $self->idx();

    if (defined($conditions) && "$conditions" ne "") {
	$conditions = "and ($conditions)";
    }
    else {
	$conditions = "";
    }

    return DBQueryWarn("select distinct $fields from $table ".
		       "where exptidx='$exptidx' $conditions");
}

#
# Ditto for update.
#
sub TableUpdate($$$;$)
{
    my ($self, $table, $sets, $conditions) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    if (ref($sets) eq "HASH") {
	$sets = join(",", map("$_='" . $sets->{$_} . "'", keys(%{$sets})));
    }
    my $exptidx = $self->idx();

    if (defined($conditions) && "$conditions" ne "") {
	$conditions = "and ($conditions)";
    }
    else {
	$conditions = "";
    }

    return 0
	if (DBQueryWarn("update $table set $sets ".
			"where exptidx='$exptidx' $conditions"));
    return -1;
}

1334
#
1335 1336
# Check permissions. Allow for either uid or a user ref until all code
# updated.
1337 1338 1339
#
sub AccessCheck($$$)
{
1340
    my ($self, $user, $access_type) = @_;
1341 1342

    # Must be a real reference. 
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1343
    return 0
1344 1345
	if (! ref($self));

1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373
    if ($access_type < TB_EXPT_MIN ||
	$access_type > TB_EXPT_MAX) {
	die("*** Invalid access type: $access_type!");
    }

    # Admins do whatever they want.
    return 1
	if ($user->IsAdmin());

    my $group = $self->GetGroup();
    return 0
	if (!defined($group));
    my $project = $self->GetProject();
    return 0
	if (!defined($project));

    #
    # An experiment may be destroyed by the experiment creator or the
    # project/group leader.
    #
    my $mintrust;
    
    if ($access_type == TB_EXPT_READINFO) {
	$mintrust = PROJMEMBERTRUST_USER;
    }
    else {
	$mintrust = PROJMEMBERTRUST_LOCALROOT;
    }
1374

1375 1376 1377 1378 1379 1380 1381
    #
    # Either proper permission in the group, or group_root in the project.
    # This lets group_roots muck with other people's experiments, including
    # those in groups they do not belong to.
    #
    return TBMinTrust($group->Trust($user), $mintrust) ||
	TBMinTrust($project->Trust($user), PROJMEMBERTRUST_GROUPROOT);
1382 1383
}

1384
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1385 1386 1387 1388
# Create the directory structure. A template_mode experiment is the one
# that is created for the template wrapper, not one created for an
# instance of the experiment. The path changes slightly, although that
# happens down in the mkexpdir script.
1389 1390 1391 1392 1393 1394 1395 1396 1397
#
sub CreateDirectory($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

1398
    my $idx = $self->idx();
1399

1400
    mysystem("$MKEXPDIR $idx");
1401 1402 1403 1404 1405 1406
    return -1
	if ($?);
    # mkexpdir sets the path in the DB. 
    return Refresh($self)
}

1407 1408 1409 1410 1411 1412 1413 1414
#
# Load the project object for an experiment.
#
sub GetProject($)
{
    my ($self) = @_;

    # Must be a real reference. 
1415
    return undef
1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434
	if (! ref($self));

    my $project = Project->Lookup($self->pid_idx());
    
    if (! defined($project)) {
	print("*** WARNING: Could not lookup project object for $self!", 1);
	return undef;
    }
    return $project;
}

#
# Load the group object for an experiment.
#
sub GetGroup($)
{
    my ($self) = @_;

    # Must be a real reference. 
1435
    return undef
1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446
	if (! ref($self));

    my $group = Group->Lookup($self->gid_idx());
    
    if (! defined($group)) {
	print("*** WARNING: Could not lookup group object for $self!\n");
	return undef;
    }
    return $group;
}

1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497
#
# Return the user and work directories. The workdir in on boss and where
# scripts chdir to when they run. The userdir is across NFS on ops, and
# where files are copied to. 
#
sub WorkDir($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    my $pid = $self->pid();
    my $eid = $self->eid();

    return TBDB_EXPT_WORKDIR() . "/${pid}/${eid}";
}
sub UserDir($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    return $self->path();
}

# Event/Web key filenames.
sub EventKeyPath($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    return UserDir($self) . "/tbdata/eventkey"; 
}
sub WebKeyPath($)
{
    my ($self) = @_;

    # Must be a real reference. 
    return -1
	if (! ref($self));

    return UserDir($self) . "/tbdata/webkey"; 
}

1498 1499 1500
#
# Add an environment variable.
#
1501
sub AddEnvVariable($$$;$)
Leigh B. Stoller's avatar