ptopgen.in 24.8 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
Timothy Stack's avatar
 
Timothy Stack committed
5
# Copyright (c) 2000-2005 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12 13
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
14 15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
16
	  "       -p include nodes the project has permission to use\n".
17
	  "       -e include given experiments resources\n" .
18 19
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
20
	  "       -r Include stuff for topologies with widearea nodes\n".
21
	  "       -s Include stuff for topologies with simulated nodes\n".
22
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23
	  "       -m Override multiplex_factor\n".
24
	  "       -u Prune unused interfaces of allocated nodes (-e)\n".
25
	  "       -c Delay capacity override\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
26
	  "       -n Add in modelnet core and edge node features\n");
27 28
    exit(-1);
}
29
my $optlist = "s:e:m:vp:rSan:c:u";
30
my $mfactor;
31
my $virtstuff = 0;
32
my $widearea  = 0;
33
my $simstuff  = 0;
34
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
35 36
my $mnetcores = 0;
my $mnetedges = 0;
37
my $prune     = 0;
38
my $delaycap_override;
39

40 41 42 43
#
# Turn off line buffering on output
#
$| = 1;
44 45 46 47 48 49 50 51 52 53 54 55

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

56 57 58 59 60 61
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

62 63
######################################################################

64
my $TBROOT = "@prefix@";
65
use lib '@prefix@/lib';
66
require exitonwarn;
67
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
68

69 70
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

71 72 73
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
74 75
my %typemap       = ();
my %auxtypemap    = ();
Timothy Stack's avatar
 
Timothy Stack committed
76
my %areamap       = ();
77

78 79 80
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

81
my $pid;
82
my $exempt_eid;
83
my $switchtouse;
84

85 86 87 88 89 90 91 92 93 94 95 96 97 98
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
99 100 101
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
102 103 104
if (defined($options{"v"})) {
    $virtstuff = 1;
}
105 106 107
if (defined($options{"r"})) {
    $widearea = 1;
}
108 109 110
if (defined($options{"S"})) {
    $simstuff = 1;
}
111 112 113
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
114 115 116
if (defined($options{"a"})) {
    $allnodes = 1;
}
117 118 119
if (defined($options{"u"})) {
    $prune = 1;
}
120 121 122
if (defined($options{"c"})) {
    $delaycap_override = $options{"c"};
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
123 124 125 126 127 128 129 130 131
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
132
if (defined($options{"e"})) {
133 134 135
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
136
}
137 138
usage()
    if ($prune && !defined($exempt_eid));
139

140
# Read class/type maps
141
my $result =
142
    DBQueryFatal("select class,type,delay_capacity,".
143
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
144
		 "   speed, RAM, trivlink_maxspeed, imageable, osid ".
145
		 "from node_types");
146
while (($class,$type,$delaycapacity,
147 148
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed,
	$imageable, $osid)
149
	    = $result->fetchrow_array) {
150 151 152 153
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
154
    $map->{'SIMCAP'}   = $simcapacity;
155
    $map->{'ISVIRT'}   = $isvirt;
156 157
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
158 159
    $map->{'OSID'}     = $osid;
    $map->{'IMAGEABLE'}= $imageable;
160
    $map->{'TRIVSPEED'}= $trivspeed;
161 162 163
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
164 165 166 167 168 169

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

Timothy Stack's avatar
 
Timothy Stack committed
170 171
# Read node_startloc
$result = DBQueryFatal("select node_id,building from node_startloc");
Timothy Stack's avatar
 
Timothy Stack committed
172
while (($node,$building) = $result->fetchrow_array) {
Timothy Stack's avatar
 
Timothy Stack committed
173
    $areamap{$node} .= " area-$building:0";
Timothy Stack's avatar
 
Timothy Stack committed
174 175
}

176 177 178 179 180
#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
181 182 183 184 185 186 187 188 189 190
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
191 192
}

193 194 195 196 197 198 199 200 201 202 203 204
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
205 206 207 208 209 210 211 212 213
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
214
    push @{$auxtypes{$node_id}}, "$type:$count";
215
}
216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
236 237
}

238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
277
$result = DBQueryFatal("select osid from os_info where " .
278
    "nextosid is not null");
279
while (my ($osid) = $result->fetchrow()) {
280 281 282
    #
    # Check to see if they were allowed to use the real OSID
    #
283
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
284 285
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
286 287 288 289 290
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

291
# Print switches
292
if (defined($switchtouse)) {
293
    print "node $switchtouse switch:1 *lan:*\n";
294 295 296 297 298 299 300
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
301
	print "node $switch switch:1 *lan:*\n";
302 303
	$switches{$switch} = 1;
    }
304
}
305

306
# Find available nodes.
307
#
308 309
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
310
#
311

312
# the ordinary free condition for a local node.
313 314
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
315
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
316
                     "  np.eventstate='" . TBDB_NODESTATE_POWEROFF . "' or ".
317
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
318 319 320 321 322

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
323
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
324
}
Chad Barb's avatar
Chad Barb committed
325

326 327 328 329 330 331
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

332
$result =
333
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
334 335
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
336 337
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
338
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
339
		 "left join node_types as t on t.type=a.type ".
340
		 "where $free_condition and ".
341
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
342

343 344 345
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
346 347 348
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
349
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
Timothy Stack's avatar
 
Timothy Stack committed
350
       = $result->fetchrow_array) {
351 352 353
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
354 355 356
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
357
    $node_def_boot_osid{$node} = $def_boot_osid;
358 359 360 361 362 363

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
364
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
365 366

foreach $node (keys(%nodes)) {
367 368 369
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
370
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
371 372
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
373
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
374
    
375
    my @types = ("$type:1");
376 377
    my @features;
    my @flags;
378
    my $needvirtgoo = 0;
379

380 381 382 383 384 385 386 387 388 389
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

390
    # Might be equal, which assign would sum as two, not one!
391 392
    if ($type ne $class) {
	push(@types, "$class:1");
393 394
    }

395
    if ($delay_capacity > 0) {
396 397 398 399 400 401
	# Comes from the NS file;
	$delay_capacity = $delaycap_override
	    if (defined($delaycap_override) &&
		$delaycap_override > 0 &&
		$delaycap_override < $delay_capacity);
	
402
	push @types, "delay:$delay_capacity";
403
	push @types, "delay-${type}:$delay_capacity";
404
    }
405

406 407 408
    #
    # Add any auxiliary types
    #
409 410 411
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
412

413 414 415
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
416 417
	}
	else {
418
	    $realtype = $auxtype;
419
	}
420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

Timothy Stack's avatar
 
Timothy Stack committed
436
    if (defined($areamap{$node})) {
Timothy Stack's avatar
 
Timothy Stack committed
437
	push @features, $areamap{$node};
Timothy Stack's avatar
 
Timothy Stack committed
438 439
    }

440
    my $cpu_ram_features_present = 0;
441 442 443 444
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
445
	push @types, "*lan:*";
446 447 448 449
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
450
	# Add CPU and RAM information
451
	$cpu_ram_features_present++;
452 453
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
454 455 456
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
457 458
    }

459 460 461 462 463 464 465 466 467 468
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
469
	# Add CPU and RAM information
470
	$cpu_ram_features_present++;
471 472 473 474
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
475 476 477 478
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
479 480
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
481
    }
482

483
    # Add features
484
    push(@features, @{$typemap{$type}->{'FEATURES'}});
485 486
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
487 488
    }

489 490 491 492 493 494 495
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }
496 497 498 499 500 501 502 503 504 505 506
    elsif (! $typemap{$type}->{'IMAGEABLE'} &&
	   defined($typemap{$type}->{'OSID'})) {
	#
	# If node is not imageable (and thus no entries in osidtoimageid,
	# then assume it always has its default OSID loaded and ready to
	# go, so that assign will agree to the allocation (assign_wrapper
	# adds a desire that says it has to be running the OSID the user
	# has selected, or the default OSID from the node_types table).
	#
	push @features, map "OS-$_:0", $typemap{$type}->{'OSID'};
    }
507

508 509
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
510
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
511 512 513
	push(@features,"already_reserved:0");
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
514 515 516 517 518 519 520 521
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

522 523 524 525 526 527 528 529 530 531 532
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
533
	}
534 535
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
536
    }
537 538 539 540 541

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


542
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
543 544
}

545 546 547 548 549 550 551 552 553 554 555
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
556 557 558 559
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
560 561
if ($widearea) {
    $result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
562 563 564 565 566
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site ".
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
567
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
568 569 570
		     "     wn.node_id=n.node_id ".
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
571
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
572 573
    while (($physnode,$ptype,$status,$mpid,$meid,$site)
	   = $result->fetchrow_array) {
574
	my $class = $typemap{$ptype}->{'CLASS'};
575 576 577 578
	my @types;
	my @features;
	my @flags;

579 580 581 582 583
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
584 585
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
586 587 588
	    push @features, "down:1";
	}

589 590 591 592 593 594 595
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

596 597 598
	#
	# Add any auxiliary types.
	#
599 600
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
601

Leigh B. Stoller's avatar
Leigh B. Stoller committed
602 603 604 605 606
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
607
	    }
608
	    push(@types, $auxinfo);
609 610 611 612 613
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

614 615 616
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

617
	# Add features
618
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
619 620
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
621 622
	}

623 624 625 626 627 628 629 630
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

631 632 633 634 635 636 637 638
	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

639
# Read interfaces
640
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
641
		     " from interfaces");
642
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
643
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
 
Chad Barb committed
644
    if ((defined $type) && ($type ne "")) {
645 646 647 648
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

649 650 651 652 653 654 655 656 657 658 659 660 661 662 663
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
664 665
}

666 667 668 669 670 671 672 673 674 675
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
676 677 678 679 680 681 682
$result = DBQueryFatal("SELECT node_id, iface, card, port, IP ".
		       "FROM interfaces");

while (($node,$iface,$card,$port,$IP) = $result->fetchrow_array) {
    next
	if ($prune && $is_reserved{$node} && (!defined($IP) || $IP eq ""));

683 684 685
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

686
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
687
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
688
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
689
       $result->fetchrow_array) {
690
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
691
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
692 693
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
694 695
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
696 697 698 699

	next
	    if (! exists($interfacecardports{"$node1:$iface1"}));
	
700 701 702 703 704 705
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
706 707
	    $bw = $iface1bw;
	} else {
708 709 710 711 712
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
713
	}
714
	if (defined($switches{$node2})) {
715 716
	    $used_switches{$node2} = 1;
	}
717 718 719 720 721 722 723 724 725 726 727 728 729 730
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
731
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
732 733
	}
    } 
734
}
735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
755
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

785 786
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
787 788
    print "link link-$interconnect $src $dst $interconnects{$interconnect} " .
	"0 0 1 ethernet\n";
789
}
790

791
#
792
# Fake switch. Hardwired for now. 
793
#
794 795 796
my @wireless_protos = ("80211", "80211a", "80211b", "80211g");
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
797

798 799
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
800

801 802
    next
    if (!defined($nodes{$node}));
803
	
804 805 806
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
807

808 809 810 811 812 813 814 815
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
816

817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
833 834
	}
    }
835 836 837
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
838 839 840 841
}

exit(0);

842 843 844 845
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
846 847 848 849 850
	if ($interfacemap{"$node:$card:$port"} eq "") {
	    return "(null)";
	} else {
	    return $interfacemap{"$node:$card:$port"};
	}
851 852 853 854 855 856 857 858 859 860 861
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

862 863
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
864
sub get_ifacebw {
865
    ($node,$card,$port,$protocol) = @_;
866
    if (defined($interfacetypes{"$node:$card:$port"})) {
867
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
868 869 870
    }
    else {
	return $default_switchport_speed;
871 872
    }
}
873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}