libsetup.pm 23.9 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14
#!/usr/bin/perl -wT

#
# Common routines and constants for the client bootime setup stuff.
#
package libsetup;
use Exporter;
@ISA = "Exporter";
@EXPORT =
    qw ( libsetup_init inform_reboot cleanup_node check_status
	 create_nicknames doifconfig dohostnames
	 doaccounts dorpms dotarballs dostartupcmd install_deltas
	 bootsetup nodeupdate startcmdstatus whatsmynickname

15
	 OPENTMCC RUNTMCC MFS
16 17

	 TMCC TMIFC TMDELAY TMRPM TMTARBALLS TMHOSTS
18
	 TMNICKNAME HOSTSFILE TMSTARTUPCMD FINDIF 
19 20 21

	 TMCCCMD_REBOOT TMCCCMD_STATUS TMCCCMD_IFC TMCCCMD_ACCT TMCCCMD_DELAY
	 TMCCCMD_HOSTS TMCCCMD_RPM TMCCCMD_TARBALL TMCCCMD_STARTUP
22 23
	 TMCCCMD_DELTA TMCCCMD_STARTSTAT TMCCCMD_READY TMCCCMD_TRAFFIC
	 TMCCCMD_BOSSINFO
24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

       );

# Must come after package declaration!
use English;

#
# This is the home of the setup library on the client machine. The including
# program has to tell us this by calling the init routine below. For example,
# it is /etc/testbed on FreeBSD and /etc/rc.d/testbed on Linux.
#
my $SETUPDIR;

sub libsetup_init($)
{
    my($path) = @_;

    $SETUPDIR = $path;
}

#
# This "local" library provides the OS dependent part. Must load this after
# defining the above function cause the local library invokes it to set the
# $SETUPDIR
#
use liblocsetup;

#
# These are the paths of various files and scripts that are part of the
# setup library.
#
sub TMCC()		{ "$SETUPDIR/tmcc"; }
sub TMIFC()		{ "$SETUPDIR/rc.ifc"; }
sub TMRPM()		{ "$SETUPDIR/rc.rpm"; }
sub TMTARBALLS()	{ "$SETUPDIR/rc.tarballs"; }
sub TMSTARTUPCMD()	{ "$SETUPDIR/startupcmd"; }
sub TMHOSTS()		{ "$SETUPDIR/hosts"; }
sub TMNICKNAME()	{ "$SETUPDIR/nickname"; }
sub FINDIF()		{ "$SETUPDIR/findif"; }
sub HOSTSFILE()		{ "/etc/hosts"; }
sub TMMOUNTDB()		{ "$SETUPDIR/mountdb"; }
65
sub TMROUTECONFIG()     { "$SETUPDIR/router.conf"; }
66
sub TMTRAFFICCONFIG()	{ "$SETUPDIR/rc.traffic"; }
67 68

#
69 70 71 72 73 74 75 76 77
# This is the VERSION. We send it through to tmcd so it knows what version
# responses this file is expecting.
#
# BE SURE TO BUMP THIS AS INCOMPATIBILE CHANGES TO TMCD ARE MADE!
#
sub TMCD_VERSION()	{ 3; };

#
# These are the TMCC commands. 
78 79 80 81 82 83
#
sub TMCCCMD_REBOOT()	{ "reboot"; }
sub TMCCCMD_STATUS()	{ "status"; }
sub TMCCCMD_IFC()	{ "ifconfig"; }
sub TMCCCMD_ACCT()	{ "accounts"; }
sub TMCCCMD_DELAY()	{ "delay"; }
84
sub TMCCCMD_HOSTS()	{ "hostnames"; }
85 86 87 88 89 90 91
sub TMCCCMD_RPM()	{ "rpms"; }
sub TMCCCMD_TARBALL()	{ "tarballs"; }
sub TMCCCMD_STARTUP()	{ "startupcmd"; }
sub TMCCCMD_DELTA()	{ "deltas"; }
sub TMCCCMD_STARTSTAT()	{ "startstatus"; }
sub TMCCCMD_READY()	{ "ready"; }
sub TMCCCMD_MOUNTS()	{ "mounts"; }
92
sub TMCCCMD_ROUTING()	{ "routing"; }
93 94
sub TMCCCMD_TRAFFIC()	{ "trafgens"; }
sub TMCCCMD_BOSSINFO()	{ "bossinfo"; }
95 96 97 98 99 100 101 102 103 104 105 106 107 108

#
# Some things never change.
# 
my $TARINSTALL  = "/usr/local/bin/install-tarfile %s %s";
my $DELTAINSTALL= "/usr/local/bin/install-delta %s";

#
# This is a debugging thing for my home network.
# 
#my $NODE	= "REDIRECT=155.101.132.101";
$NODE		= "";

# Locals
109 110 111 112 113 114 115 116
my $pid		= "";
my $eid		= "";
my $vname	= "";

# When on the MFS, we do a much smaller set of stuff.
# Cause of the way the packages are loaded (which I do not understand),
# this is computed on the fly instead of once.
sub MFS()	{ if (-e "$SETUPDIR/ismfs") { return 1; } else { return 0; } }
117 118 119 120 121 122 123 124 125 126 127 128 129 130 131

#
# Open a TMCC connection and return the "stream pointer". Caller is
# responsible for closing the stream and checking return value.
#
# usage: OPENTMCC(char *command, char *args)
#
sub OPENTMCC($;$)
{
    my($cmd, $args) = @_;
    local *TM;

    if (!defined($args)) {
	$args = "";
    }
132 133
    my $foo = sprintf("%s -v %d %s %s %s |",
		      TMCC, TMCD_VERSION, $NODE, $cmd, $args);
134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176

    open(TM, $foo)
	or die "Cannot start $TMCC: $!";

    return (*TM);
}

#
# Run a TMCC command with the provided arguments.
#
# usage: RUNTMCC(char *command, char *args)
#
sub RUNTMCC($;$)
{
    my($cmd, $args) = @_;
    my($TM);

    if (!defined($args)) {
	$args = "";
    }
    $TM = OPENTMCC($cmd, $args);

    close($TM)
	or die $? ? "TMCC exited with status $?" : "Error closing pipe: $!";
    
    return 0;
}

#
# Inform the master we have rebooted.
#
sub inform_reboot()
{
    RUNTMCC(TMCCCMD_REBOOT);
    return 0;
}

#
# Reset to a moderately clean state.
#
sub cleanup_node () {
    print STDOUT "Cleaning node; removing configuration files ...\n";
    unlink TMIFC, TMRPM, TMSTARTUPCMD, TMNICKNAME, TMTARBALLS;
177
    unlink TMROUTECONFIG, TMTRAFFICCONFIG;
178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224
    unlink TMMOUNTDB . ".db";

    printf STDOUT "Resetting %s file\n", HOSTSFILE;
    if (system($CP, "-f", TMHOSTS, HOSTSFILE) != 0) {
	printf STDERR "Could not copy default %s into place: $!\n", HOSTSFILE;
	exit(1);
    }

    return os_cleanup_node();
}

#
# Check node allocation.
#
# Returns 0 if node is free. Returns list (pid/eid/vname) if allocated.
#
sub check_status ()
{
    my $TM;
    
    $TM = OPENTMCC(TMCCCMD_STATUS);
    $_  = <$TM>;
    close($TM);

    if ($_ =~ /^FREE/) {
	return 0;
    }
    
    if ($_ =~ /ALLOCATED=([-\@\w.]*)\/([-\@\w.]*) NICKNAME=([-\@\w.]*)/) {
	$pid   = $1;
	$eid   = $2;
	$vname = $3;
    }
    else {
	warn "*** WARNING: Error getting reservation status\n";
	return 0;
    }
    return ($pid, $eid, $vname);
}

#
# Stick our nickname in a file in case someone wants it.
#
sub create_nicknames()
{
    open(NICK, ">" . TMNICKNAME)
	or die("Could not open nickname file: $!");
225
    print NICK "$vname.$eid.$pid\n";
226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251
    close(NICK);

    return 0;
}

#
# Process mount directives from TMCD. We keep track of all the mounts we
# have added in here so that we delete just the accounts we added, when
# project membership changes. Same goes for project directories on shared
# nodes. We use a simple perl DB for that.
#
sub domounts()
{
    my $TM;
    my %MDB;
    my %mounts;
    my %deletes;
    
    $TM = OPENTMCC(TMCCCMD_MOUNTS);

    while (<$TM>) {
	if ($_ =~ /REMOTE=([-:\@\w\.\/]+) LOCAL=([-\@\w\.\/]+)/) {
	    $mounts{$1} = $2;
	}
    }

252 253 254 255
    #
    # The MFS version does not support (or need) this DB stuff. Just mount
    # them up.
    #
256
    if (MFS()) {
257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273
	while (($remote, $local) = each %mounts) {
	    if (! -e $local) {
		if (! os_mkdir($local, 0770)) {
		    warn "*** WARNING: Could not make directory $local: $!\n";
		    next;
		}
	    }
	
	    print STDOUT "  Mounting $remote on $local\n";
	    if (system("$MOUNT $remote $local")) {
		warn "*** WARNING: Could not $MOUNT $remote on $local: $!\n";
		next;
	    }
	}
	return 0;
    }

274 275 276 277 278 279 280 281 282 283 284 285 286
    dbmopen(%MDB, TMMOUNTDB, 0660);
    
    #
    # First mount all the mounts we are told to. For each one that is not
    # currently mounted, and can be mounted, add it to the DB.
    # 
    while (($remote, $local) = each %mounts) {
	if (system("$MOUNT | $EGREP ' $local '") == 0) {
	    $MDB{$remote} = $local;
	    next;
	}

	if (! -e $local) {
287
	    if (! os_mkdir($local, 0770)) {
288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358
		warn "*** WARNING: Could not make directory $local: $!\n";
		next;
	    }
	}
	
	print STDOUT "  Mounting $remote on $local\n";
	if (system("$MOUNT $remote $local")) {
	    warn "*** WARNING: Could not $MOUNT $remote on $local: $!\n";
	    next;
	}

	$MDB{$remote} = $local;
    }

    #
    # Now unmount the ones that we mounted previously, but are now no longer
    # in the mount set (as told to us by the TMCD). Note, we cannot delete 
    # them directly from MDB since that would mess up the foreach loop, so
    # just stick them in temp and postpass it.
    #
    while (($remote, $local) = each %MDB) {
	if (defined($mounts{$remote})) {
	    next;
	}

	if (system("$MOUNT | $EGREP ' $local '")) {
	    $deletes{$remote} = $local;
	    next;
	}

	print STDOUT "  Unmounting $local\n";
	if (system("$UMOUNT $local")) {
	    warn "*** WARNING: Could not unmount $local\n";
	    next;
	}
	
	#
	# Only delete from set if we can actually unmount it. This way
	# we can retry it later (or next time).
	# 
	$deletes{$remote} = $local;
    }
    while (($remote, $local) = each %deletes) {
	delete($MDB{$remote});
    }

    # Write the DB back out!
    dbmclose(%MDB);

    return 0;
}

#
# Do interface configuration.    
# Write a file of ifconfig lines, which will get executed.
#
sub doifconfig ()
{
    my $TM;
    
    $TM = OPENTMCC(TMCCCMD_IFC);

    #
    # Open a connection to the TMCD, and then open a local file into which
    # we write ifconfig commands (as a shell script).
    # 
    open(IFC, ">" . TMIFC)
	or die("Could not open " . TMIFC . ": $!");
    print IFC "#!/bin/sh\n";
    
    while (<$TM>) {
359 360 361 362 363 364 365 366 367
	my $pat;

	#
	# Note that speed has a units spec: (K|M)bps
	# 
	$pat  = q(INTERFACE=(\d*) INET=([0-9.]*) MASK=([0-9.]*) MAC=(\w*) );
	$pat .= q(SPEED=(\w*) DUPLEX=(\w*));
	
	if ($_ =~ /$pat/) {
368 369
	    my $iface;

370 371 372 373 374 375 376 377 378
	    my $inet  = $2;
	    my $mask  = $3;
	    my $mac   = $4;
	    my $speed = $5; 
	    my $duplex= $6;

	    if ($iface = findiface($mac)) {
		my $ifline =
		    os_ifconfig_line($iface, $inet, $mask, $speed, $duplex);
379 380 381 382 383
		    
		print STDOUT "  $ifline\n";
		print IFC "$ifline\n";
	    }
	    else {
384
		warn "*** WARNING: Bad MAC: $mac\n";
385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418
	    }
	}
	else {
	    warn "*** WARNING: Bad ifconfig line: $_";
	}
    }
    close($TM);
    close(IFC);
    chmod(0755, TMIFC);

    return 0;
}

#
# Convert from MAC to iface name (eth0/fxp0/etc) using little helper program.
# 
sub findiface($)
{
    my($mac) = @_;
    my($iface);

    open(FIF, FINDIF . " $mac |")
	or die "Cannot start " . FINDIF . ": $!";

    $iface = <FIF>;
    
    if (! close(FIF)) {
	return 0;
    }
    
    $iface =~ s/\n//g;
    return $iface;
}

419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463
#
# Do router configuration stuff. This just writes a file for someone else
# to deal with.
#
sub dorouterconfig ()
{
    my @stuff   = ();
    my $routing = 0;
    my $TM;

    $TM = OPENTMCC(TMCCCMD_ROUTING);
    while (<$TM>) {
	push(@stuff, $_);
    }
    close($TM);

    if (! @stuff) {
	return 0;
    }

    #
    # Look for router type. If none, then do not bother to write this file.
    # 
    foreach my $line (@stuff) {
	if (($line =~ /ROUTERTYPE=(.+)/) && ($1 ne "none")) {
	    $routing = 1;
	    last;
	}
    }
    if (! $routing) {
	return 0;
    }
    
    open(RC, ">" . TMROUTECONFIG)
	or die("Could not open " . TMROUTECONFIG . ": $!");

    foreach my $line (@stuff) {
	    print STDOUT "  $line";
	    print RC "$line";
    }
    close(RC);

    return 0;
}

464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486
#
# Host names configuration (/etc/hosts). 
#
sub dohostnames ()
{
    my $TM;

    #
    # Start with fresh copy, since the hosts files is potentially updated
    # after the node boots via the update command.
    # 
    if (system($CP, "-f", TMHOSTS, HOSTSFILE) != 0) {
	printf STDERR "Could not copy default %s into place: $!\n", HOSTSFILE;
	return 1;
    }
    
    $TM = OPENTMCC(TMCCCMD_HOSTS);

    open(HOSTS, ">>" . HOSTSFILE)
	or die("Could not open $HOSTSFILE: $!");

    #
    # Now convert each hostname into hosts file representation and write
487 488 489 490 491
    # it to the hosts file. Note that ALIASES is for backwards compat.
    # Should go away at some point.
    #
    my $pat  = q(NAME=([-\w\.]+) IP=([0-9\.]*) ALIASES=\'([-\w\. ]*)\');
    
492
    while (<$TM>) {
493 494 495 496 497 498
	if ($_ =~ /$pat/) {
	    my $name    = $1;
	    my $ip      = $2;
	    my $aliases = $3;
	    
	    my $hostline = os_etchosts_line($name, $ip, $aliases);
499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609
	    
	    print STDOUT "  $hostline\n";
	    print HOSTS  "$hostline\n";
	}
	else {
	    warn "*** WARNING: Bad hosts line: $_";
	}
    }
    close($TM);
    close(HOSTS);

    return 0;
}

sub doaccounts ()
{
    my %oldaccounts = ();
    my %newaccounts = ();

    my $TM = OPENTMCC(TMCCCMD_ACCT);

    #
    # The strategy here is to grab the list of default accounts from our
    # stub password file, and then add to that the list of accounts that
    # are supposed to be on this machine as told to us by the TMCD. Then,
    # go through the existing accounts in the real password file, and add
    # the ones that are not there and remove the ones that should not be
    # there.
    #
    # Removing groups is not neccessary, so just process those as we get
    # from the TMCD.
    # 
    while (<$TM>) {
	if ($_ =~ /^ADDGROUP NAME=([-\@\w.]+) GID=([0-9]+)/) {
	    print STDOUT "  Group: $1/$2\n";

	    $group = $1;
	    $gid   = $2;

	    ($exists) = getgrgid($gid);
	    if ($exists) {
		next;
	    }
	
	    if (os_groupadd($group, $gid)) {
		warn "*** WARNING: Error adding new group $1/$2\n";
	    }
	    next;
	}
	elsif ($_ =~ /^ADDUSER LOGIN=([0-9a-z]+)/) {
	    #
	    # Account info goes in the hash table.
	    # 
	    $newaccounts{$1} = $_;
	    next;
	}
	else {
	    warn "*** WARNING: Bad accounts line: $_";
	}
    }
    close($TM);

    #
    # All we need to know about the stub accounts is which ones should exist
    # once we are done. Add those to the hash table we created above, but
    # only if not in the list we got from the TMCD. This allows us to
    # override the default accounts with new account info from the TMCD.
    #
    open(PASSWD, $TMPASSWD)
	or die "Cannot open $TMPASSWD: $!";

    while (<PASSWD>) {
	if ($_ =~ /^([0-9a-z]+):/) {
	    if (! defined($newaccounts{$1})) {
		$newaccounts{$1} = "OLDUSER LOGIN=$1";
	    }
	}
    }
    close(PASSWD);

    #
    # Pick up the list of current accounts on this machine. Easier if
    # I have both lists in hand as hash tables. Also note that changing
    # the account list while doing a getpwent() loop can lead to unusual
    # things happening. 
    #
    while (my $login = getpwent()) {
	$oldaccounts{$login} = $login;
    }

    #
    # First off, lets delete accounts that are no longer supposed to be here.
    # We unmount the homedirs too (or try to!).
    #
    foreach my $login (keys %oldaccounts) {
	if (!defined($newaccounts{$login})) {

	    print "  Deleting User: $login\n";
	    
	    if (os_userdel($login) != 0) {
		warn "*** WARNING: Error deleting user $login\n";
	    }
	}
    }

    #
    # Now do the new accounts. We go through the entire list of accounts
    # we got. This includes the list from the TMCD, and the list we get
    # locally from the stub password file. We leave the stub accounts alone
    # since they are in the list to prevent deletion. 
    #
610 611 612
    my $pat = q(ADDUSER LOGIN=([0-9a-z]+) PSWD=([^:]+) UID=(\d+) GID=(.*) );
    $pat   .= q(ROOT=(\d) NAME="(.*)" HOMEDIR=(.*) GLIST=(.*));
  
613 614 615
    foreach my $login (keys %newaccounts) {
	my $info = $newaccounts{$login};
	
616
	if ($info =~ /$pat/) {
617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667
	    $pswd  = $2;
	    $uid   = $3;
	    $gid   = $4;
	    $root  = $5;
	    $name  = $6;
	    $hdir  = $7;
	    $glist = $8;
	    if ( $name =~ /^(([^:]+$|^))$/ ) {
		$name = $1;
	    }
	    print STDOUT "  User: $login/$uid/$gid/$root/$name/$hdir/$glist\n";

	    ($exists) = getpwuid($uid);
	    if ($exists) {
		os_usermod($login, $gid, "$glist", $root);
		next;
	    }

	    if (os_useradd($login, $uid, $gid, $pswd, 
			   "$glist", $hdir, $name, $root)) {
		warn "*** WARNING: Error adding new user $login\n";
		next;
	    }
	    next;
	}
    }
    return 0;
}

#
# RPM configuration. 
#
sub dorpms ()
{
    my @rpms = ();
    
    my $TM = OPENTMCC(TMCCCMD_RPM);
    while (<$TM>) {
	push(@rpms, $_);
    }
    close($TM);

    if (! @rpms) {
	return 0;
    }
    
    open(RPM, ">" . TMRPM)
	or die("Could not open " . TMRPM . ": $!");
    print RPM "#!/bin/sh\n";
    
    foreach my $rpm (@rpms) {
668
	if ($rpm =~ /RPM=(.+)/) {
669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706
	    my $rpmline = os_rpminstall_line($1);
		    
	    print STDOUT "  $rpmline\n";
	    print RPM    "echo \"Installing RPM $1\"\n";
	    print RPM    "$rpmline\n";
	}
	else {
	    warn "*** WARNING: Bad RPMs line: $rpm";
	}
    }
    close(RPM);
    chmod(0755, TMRPM);

    return 0;
}

#
# TARBALL configuration. 
#
sub dotarballs ()
{
    my @tarballs = ();

    my $TM = OPENTMCC(TMCCCMD_TARBALL);
    while (<$TM>) {
	push(@tarballs, $_);
    }
    close($TM);

    if (! @tarballs) {
	return 0;
    }
    
    open(TARBALL, ">" . TMTARBALLS)
	or die("Could not open " . TMTARBALLS . ": $!");
    print TARBALL "#!/bin/sh\n";
    
    foreach my $tarball (@tarballs) {
707
	if ($tarball =~ /DIR=(.+)\s+TARBALL=(.+)/) {
708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744
	    my $tbline = sprintf($TARINSTALL, $1, $2);
		    
	    print STDOUT  "  $tbline\n";
	    print TARBALL "echo \"Installing Tarball $2 in dir $1 \"\n";
	    print TARBALL "$tbline\n";
	}
	else {
	    warn "*** WARNING: Bad Tarballs line: $tarball";
	}
    }
    close(TARBALL);
    chmod(0755, TMTARBALLS);

    return 0;
}

#
# Experiment startup Command.
#
sub dostartupcmd ()
{
    my $startupcmd;
    
    my $TM = OPENTMCC(TMCCCMD_STARTUP);
    $_ = <$TM>;
    if (defined($_)) {
	$startupcmd = $_;
    }
    close($TM);

    if (! $startupcmd) {
	return 0;
    }
    
    open(RUN, ">" . TMSTARTUPCMD)
	or die("Could not open $TMSTARTUPCMD: $!");
    
745
    if ($startupcmd =~ /CMD=(\'.+\') UID=([0-9a-z]+)/) {
746 747 748 749 750 751 752 753 754 755 756 757 758
	print  STDOUT "  Will run $1 as $2\n";
	print  RUN    "$startupcmd";
    }
    else {
	warn "*** WARNING: Bad startupcmd line: $startupcmd";
    }

    close(RUN);
    chmod(0755, TMSTARTUPCMD);

    return 0;
}

759 760 761 762 763 764
sub dotrafficconfig()
{
    my $didopen = 0;
    my $pat;
    my $TM;
    my $boss;
765
    my $startnse = 0;
766 767 768 769 770 771 772 773 774 775

    #
    # Kinda ugly, but there is too much perl goo included by Socket to put it
    # on the MFS. 
    # 
    if (MFS()) {
	return 1;
    }
    require Socket;
    import Socket;
776 777 778 779
    
    $TM = OPENTMCC(TMCCCMD_BOSSINFO);
    ($boss) = split(" ", <$TM>);
    close($TM);
780 781 782 783 784 785
    my ($pid, $eid, $vname) = check_status();

    my $cmdline = "$SETUPDIR/trafgen -s $boss";
    if ($pid) {
	$cmdline .= " -E $pid/$eid";
    }
786 787 788

    $TM = OPENTMCC(TMCCCMD_TRAFFIC);

789
    $pat  = q(TRAFGEN=([-\w.]+) MYNAME=([-\w.]+) MYPORT=(\d+) );
790
    $pat .= q(PEERNAME=([-\w.]+) PEERPORT=(\d+) );
791
    $pat .= q(PROTO=(\w+) ROLE=(\w+) GENERATOR=(\w+));
792 793 794 795 796

    while (<$TM>) {
	if ($_ =~ /$pat/) {
	    #
	    # The following is specific to the modified TG traffic generator:
797 798 799 800 801
	    #
	    #  trafgen [-s serverip] [-p serverport] [-l logfile] \
	    #	     [ -N name ] [-P proto] [-R role] [ -E pid/eid ] \
	    #	     [ -S srcip.srcport ] [ -T targetip.targetport ]
	    #
802 803
	    # N.B. serverport is not needed right now
	    #
804 805 806 807 808 809 810 811
	    my $name = $1;
	    my $ownaddr = inet_ntoa(my $ipaddr = gethostbyname($2));
	    my $ownport = $3;
	    my $peeraddr = inet_ntoa($ipaddr = gethostbyname($4));
	    my $peerport = $5;
	    my $proto = $6;
	    my $role = $7;
	    my $generator = $8;
812
	    my $target;
813
	    my $source;
814

815 816 817
	    # Skip if not specified as a TG generator. At some point
	    # work in Shashi's NSE work.
	    if ($generator ne "TG") {
818 819 820 821 822 823 824
		$startnse = 1;
		if (! $didopen) {
		    open(RC, ">" . TMTRAFFICCONFIG)
			or die("Could not open " . TMTRAFFICCONFIG . ": $!");
		    print RC "#!/bin/sh\n";
		    $didopen = 1;
		}
825 826 827
		next;
	    }

828 829
	    if ($role eq "sink") {
		$target = "$ownaddr.$ownport";
830
		$source = "$peeraddr.$peerport";
831 832 833
	    }
	    else {
		$target = "$peeraddr.$peerport";
834
		$source = "$ownaddr.$ownport";
835 836 837 838 839 840 841 842
	    }

	    if (! $didopen) {
		open(RC, ">" . TMTRAFFICCONFIG)
		    or die("Could not open " . TMTRAFFICCONFIG . ": $!");
		print RC "#!/bin/sh\n";
		$didopen = 1;
	    }
843
	    print RC "$cmdline -N $name -S $source -T $target -P $proto -R $role >/tmp/$name.debug 2>&1 &\n";
844 845 846 847 848
	}
	else {
	    warn "*** WARNING: Bad traffic line: $_";
	}
    }
849 850 851 852 853

    if( $startnse ) {
	print RC "$SETUPDIR/startnse &\n";
    }
    
854 855 856 857 858 859 860 861 862
    close($TM);
    if ($didopen) {
	close(RC);
	chmod(0755, TMTRAFFICCONFIG);
    }
    return 0;
}


863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905
#
# Boot Startup code. This is invoked from the setup OS dependent script,
# and this fires up all the stuff above.
#
sub bootsetup()
{
    #
    # First clean up the node.
    #
    cleanup_node();

    #
    # Inform the master that we have rebooted.
    #
    inform_reboot();

    #
    # Check allocation. Exit now if not allocated.
    #
    print STDOUT "Checking Testbed reservation status ... \n";
    if (! check_status()) {
	print STDOUT "  Free!\n";
	return 0;
    }
    print STDOUT "  Allocated! $pid/$eid/$vname\n";

    #
    # Setup a nicknames file. 
    #
    create_nicknames();

    #
    # Mount the project and user directories
    #
    print STDOUT "Mounting project and home directories ... \n";
    domounts();

    #
    # Do account stuff.
    # 
    print STDOUT "Checking Testbed group/user configuration ... \n";
    doaccounts();

906 907 908 909 910 911
    if (! MFS()) {
	#
	# Okay, lets find out about interfaces.
	#
	print STDOUT "Checking Testbed interface configuration ... \n";
	doifconfig();
912

913 914 915 916 917
	#
	# Host names configuration (/etc/hosts). 
	#
	print STDOUT "Checking Testbed hostnames configuration ... \n";
	dohostnames();
918

919 920 921 922 923
	#
	# Router Configuration.
	#
	print STDOUT "Checking Testbed routing configuration ... \n";
	dorouterconfig();
924

925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942
	#
	# Traffic generator Configuration.
	#
	print STDOUT "Checking Testbed traffic generation configuration ...\n";
	dotrafficconfig();

	#
	# RPMS
	# 
	print STDOUT "Checking Testbed RPM configuration ... \n";
	dorpms();

	#
	# Tar Balls
	# 
	print STDOUT "Checking Testbed Tarball configuration ... \n";
	dotarballs();
    }
943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066

    #
    # Experiment startup Command.
    #
    print STDOUT "Checking Testbed Experiment Startup Command ... \n";
    dostartupcmd();

    #
    # OS specific stuff
    #
    os_setup();

    return 0;
}

#
# These are additional support routines for other setup scripts.
#
#
# Node update. This gets fired off after reboot to update accounts,
# mounts, etc. Its the start of shared node support. Quite rough at
# the moment. 
#
sub nodeupdate()
{
    #
    # Check allocation. If the node is now free, then do a cleanup
    # to reset the password files. The node should have its disk
    # reloaded to be safe, at the very least a reboot, but thats for
    # the future. We also need to kill processes belonging to people
    # whose accounts have been killed. Need to check the atq also for
    # queued commands.
    #
    if (! check_status()) {
	print "Node is free. Cleaning up password and group files.\n";
	cleanup_node();
	return 0;
    }

    #
    # Mount the project and user directories
    #
    print STDOUT "Mounting project and home directories ... \n";
    domounts();

    #
    # Host names configuration (/etc/hosts). 
    #
    print STDOUT "Checking Testbed hostnames configuration ... \n";
    dohostnames();

    #
    # Do account stuff.
    # 
    print STDOUT "Checking Testbed group/user configuration ... \n";
    doaccounts();

    return 0;
}

#
# Report startupcmd status back to the TMCC. Called by the runstartup
# script. 
#
sub startcmdstatus($)
{
    my($status) = @_;

    RUNTMCC(TMCCCMD_STARTSTAT, "$status");
    return 0;
}

#
# Install deltas. Return 0 if nothing happened. Return -1 if there was
# an error. Return 1 if deltas installed, which tells the caller to reboot.
#
# This is going to get invoked very early in the boot process, possibly
# before the normal client initialization. So we have to do a few things
# to make things are consistent. 
#
sub install_deltas ()
{
    my @deltas = ();
    my $reboot = 0;

    #
    # Inform the master that we have rebooted.
    #
    inform_reboot();

    #
    # Check allocation. Exit now if not allocated.
    #
    if (! check_status()) {
	return 0;
    }

    #
    # Now do the actual delta install.
    # 
    my $TM = OPENTMCC(TMCCCMD_DELTA);
    while (<$TM>) {
	push(@deltas, $_);
    }
    close($TM);

    #
    # No deltas. Just exit and let the boot continue.
    #
    if (! @deltas) {
	return 0;
    }

    #
    # Mount the project directory.
    #
    domounts();

    #
    # Install all the deltas, and hope they all install okay. We reboot
    # if any one does an actual install (they may already be installed).
    # If any fails, then give up.
    # 
    foreach $delta (@deltas) {
1067
	if ($delta =~ /DELTA=(.+)/) {
1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112
	    print STDOUT  "Installing DELTA $1 ...\n";

	    system(sprintf($DELTAINSTALL, $1));
	    my $status = $? >> 8;
	    if ($status == 0) {
		$reboot = 1;
	    }
	    else {
		if ($status < 0) {
		    print STDOUT "Failed to install DELTA $1. Help!\n";
		    return -1;
		}
	    }
	}
    }
    return $reboot;
}

#
# Early on in the boot, we want to reset the hostname. This gets the
# nickname and returns it. 
#
# This is going to get invoked very early in the boot process, before the
# normal client initialization. So we have to do a few things to make
# things are consistent. 
#
sub whatsmynickname()
{
    #
    # Inform the master that we have rebooted. THIS MUST BE DONE!
    #
    inform_reboot();

    #
    # Check allocation. Exit now if not allocated.
    #
    if (! check_status()) {
	return 0;
    }

    return "$vname.$eid.$pid";
}

1;