tbswap.in 22.1 KB
Newer Older
1 2 3 4
#!/usr/bin/perl -w

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
6 7 8 9
# All rights reserved.
#
use English;

10 11 12
# Returns 0 on success.
# Returns 1 on non-assign_wrapper failure.
# Returns (1 | assign_wrapper's errorcode) on assign_wrapper failure.
13 14
# Returns |0x40 if update caused a swapout. Icky.
# Returns -1 on uncontrolled error (die called).
15

16 17 18 19 20
# XXX: handle error cases for update? (backup the db?)
# XXX: Shouldn't do idempotent stuff twice for update.
# XXX: repush/calc routing for update??? (tbprerun)
# XXX: previz for update???              (tbprerun)
# XXX: make snmpit faster for update.
Chad Barb's avatar
Chad Barb committed
21 22 23
#
# XXX: for update, expt is swapped out on os_setup fail.
#      (we only recover if assign fails)
24 25 26

sub usage()
{
27
    print STDERR "Usage: $0 -force { in | out | update [-reboot] [-eventsys_restart] } pid eid\n";
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
    exit(-1);
}

#
# Configure variables
#
my $TBROOT         = "@prefix@";
my $TESTMODE       = @TESTMODE@;
my $DISABLE_EVENTS = "@DISABLE_EVENT_SCHED@";

# Untaint the path
$ENV{'PATH'} = "/usr/bin:$TBROOT/libexec:$TBROOT/libexec/ns2ir" . 
    ":$TBROOT/sbin:$TBROOT/bin";

#
# Testbed Support libraries
#
use lib "@prefix@/lib";
use libdb;
use libtestbed;
require exitonwarn; # exitonwarn isn't really a module, so just require it

#
# Actual swap-in and swap-out functions, defined below.
#
53 54 55 56 57 58 59
sub doSwapout($);
sub doSwapin($);

sub REAL()    { return 4; }
sub CLEANUP() { return 3; }
sub RETRY()   { return 2; }
sub UPDATE()  { return 1; }
Chad Barb's avatar
Chad Barb committed
60
sub UPDATE_RECOVER()  { return 0; }
61 62 63 64 65 66 67

#
# Turn off line buffering on output
#

$| = 1;

68 69
my $updateReboot   = 0;
my $updateReconfig = 1;
70
my $updateEventsys_restart = 0;
71 72
my $force  = 0;
my $errors = 0;
Chad Barb's avatar
Chad Barb committed
73
my $assignWrapperErrorCode = 0;
74
my $updatehosed = 0;
75
my $state;
76
my $canceled;
77 78
my $os_setup_pid;
my $cleanvlans;
79
my $nextState;
80 81

#
82
# First argument is either "in", "out", or "update";
83 84 85 86 87
# this value goes into $swapop.
#

my $swapop = shift;	

88 89 90 91
if (!$swapop || 
    (($swapop ne "in") && 
     ($swapop ne "out") &&
     ($swapop ne "update"))) {
92 93 94 95 96 97 98 99 100 101 102
    usage();
}

#
# Get other arguments.
#

while ($#ARGV > 1) {
    $arg = shift;
    if ($arg eq "-force") {
	$force = 1;
Chad Barb's avatar
Chad Barb committed
103 104
    } elsif ($arg eq "-reboot") {
	$updateReboot = 1;
105
	$updateReconfig = 0;
106 107
    } elsif ($arg eq "-eventsys_restart" && $swapop eq "update") {
	$update_Eventsys_restart = 1;
108 109 110 111 112 113 114 115 116
    } else {
	usage();
    }
}
if ($#ARGV < 1) {
    usage();
}
my ($pid,$eid) = @ARGV;

117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132
#
# Untaint the arguments.
#
if ($pid =~ /^([-\@\w.]+)$/) {
    $pid = $1;
}
else {
    die("Tainted argument $pid!\n");
}
if ($eid =~ /^([-\@\w.]+)$/) {
    $eid = $1;
}
else {
    die("Tainted argument $eid!\n");
}

133 134 135 136 137 138 139 140 141 142 143 144 145
TBDebugTimeStampsOn();

#
# Print starting message.
#

print "Beginning swap-$swapop for $pid/$eid. " . TBTimeStamp() . "\n";
TBDebugTimeStamp("tbswap $swapop started");

#
# Get experiment state; verify that experiment exists.
#
if (! ($state = ExpState($pid, $eid))) {
146 147
    die("*** $0:\n".
	"    No such experiment $pid/$eid\n");
148
}
149 150 151 152 153 154
# Sanity check the current state. 
if (!$force) {
    if ($swapop eq "in") {
	die("*** $0:\n".
	    "    Experiment should be ACTIVATING. Currently $state.\n")
	    if ($state ne EXPTSTATE_ACTIVATING);
155
    }
156 157 158 159
    elsif ($swapop eq "out") {
	die("*** $0:\n".
	    "    Experiment should be SWAPPING. Currently $state.\n")
	    if ($state ne EXPTSTATE_SWAPPING);
160
    }
161 162 163 164
    elsif ($swapop eq "update") {
	die("*** $0:\n".
	    "    Experiment should be MODIFY_RESWAP. Currently $state.\n")
	    if ($state ne EXPTSTATE_MODIFY_RESWAP);
165 166 167 168 169 170
    }
}

#
# Do actual swapping
#
171 172 173 174 175
if ($swapop eq "out") {
    #
    # Swap out
    #
    $errors = doSwapout(REAL);
176
}
177 178 179 180 181 182 183 184
elsif ($swapop eq "update") {
    #
    # Update.
    #
    # Phase One -- swap experiment partially out.
    #
    print STDERR "Backing up physical state...\n";
    TBExptBackupPhysicalState($pid,$eid);
185

186
    $errors = doSwapout(UPDATE);
Chad Barb's avatar
Chad Barb committed
187

188
    if ($errors) {
189
	#
190 191 192 193 194
	# Clean up the mess, leaving the experiment in the SWAPPED state,
	# 
	print STDERR "Cleaning up after errors.\n";
	doSwapout(CLEANUP);
	$updatehosed = 1;
195
    }
196
    else {
197
	#
198
	# Phase Two -- swap experiment back in.
199
	#
Chad Barb's avatar
Chad Barb committed
200 201
	$errors = doSwapin(UPDATE);

202
	if ($errors) {
Chad Barb's avatar
Chad Barb committed
203 204 205
	    #
	    # There were errors; see if we can recover.
	    #
206
	    my $NoRecover = 0;
Chad Barb's avatar
Chad Barb committed
207 208 209

	    if ($errors != 7) {
		print STDERR "Update failure occurred _after_ assign phase; ";
210
		$NoRecover = 1;
Chad Barb's avatar
Chad Barb committed
211 212
	    }

213 214 215
	    if (! $NoRecover) {
		print STDERR "Recovering physical state.\n";
		if (($NoRecover = TBExptRestorePhysicalState($pid,$eid))) {
Chad Barb's avatar
Chad Barb committed
216 217 218
		    print STDERR "Could not restore backed-up physical state; ";
		}
	    }
219 220 221
	    if (! $NoRecover) {
		print STDERR "Doing a recovery swap-in of old state.\n";
		if (($NoRecover = doSwapin(UPDATE_RECOVER))) {
Chad Barb's avatar
Chad Barb committed
222 223 224
		    print STDERR "Could not swap in old physical state; ";
		}
	    }
225 226
	    if ($NoRecover) {
		print STDERR "Recovery aborted! Swapping experiment out.\n";
Chad Barb's avatar
Chad Barb committed
227
		doSwapout(CLEANUP);
228 229 230 231
		$updatehosed = 1;
	    }
	    else {
		print STDERR "Update recovery successful.\n";
Chad Barb's avatar
Chad Barb committed
232
	    }
233
	}
Chad Barb's avatar
Chad Barb committed
234 235
    }
}
236 237 238 239 240 241 242
elsif ($swapop eq "in") {
    #
    # Swap in
    #
    my $retries = 2;
    
    $errors = doSwapin(REAL);
Chad Barb's avatar
Chad Barb committed
243

244 245 246 247 248 249 250 251 252 253
    #
    # Attempt a retry if: 
    #   a) there were errors, 
    #   b) doswapin() indicated (via return code 3) a retry is appropriate,
    #   c) we haven't tried too many times already.
    #   d) The cancelflag has not been set.
    #   e) $TESTMODE == 0.
    #
    while ($errors == 3 && $retries && !$canceled && !$TESTMODE) {
	$retries--;
254

255 256
	print STDERR "Cleaning up after errors; will try again.\n";
	doSwapout(RETRY);
257

258 259
	print STDERR "Trying again...\n";
	$errors = doSwapin(RETRY);
260
    }
261 262 263 264
    if ($errors || $canceled) {
	print STDERR "Cleaning up after " .
	    ($errors ? "errors" : "cancelation") . ".\n";
	doSwapout(CLEANUP);
265 266 267 268 269 270 271
    }
}

#
# Write appropriate message and exit.
#
if ($errors) {
272
    print "Failingly finished swap-$swapop for $pid/$eid. " .TBTimeStamp(). "\n";
273
    TBDebugTimeStamp("tbswap $swapop finished (failed)");
Chad Barb's avatar
Chad Barb committed
274

275 276 277
    # pass assign wrapper info along.
    # other codes in 'errors' (3 or 7) are meaningless and
    # should just be reported as 1's.
278
    exit(1 | $assignWrapperErrorCode | ($updatehosed ? 0x40 : 0));
279
}
280 281 282
print "Successfully finished swap-$swapop for $pid/$eid. " . TBTimeStamp() ."\n";
TBDebugTimeStamp("tbswap $swapop finished (succeeded)");
exit(0);
283 284 285 286

#################################

##
Chad Barb's avatar
Chad Barb committed
287
#
288 289
# doSwapout - Swaps experiment out.
#
Chad Barb's avatar
Chad Barb committed
290
#             If in REAL or CLEANUP,
291 292 293
#             this function will free all nodes for the 
#             experiment.
#
Chad Barb's avatar
Chad Barb committed
294
#             If in RETRY or UDPATE,
295 296 297 298 299 300
#             only nodes not in RES_READY will be freed.
#
#             Returns 0 on success, >0 on failure.
#
##

301 302
sub doSwapout($) {
    my $type = shift; # REAL==4, CLEANUP==3, RETRY==2, UPDATE==1.
303 304 305 306 307 308 309 310 311 312 313
    my $swapout_errors = 0;

    #
    # wait for os_setup;
    # this only applies if called after a failed doswapin.
    #
    if ($os_setup_pid) {
	print "Waiting for os_setup to finish\n";
	waitpid($os_setup_pid, 0);
	undef $os_setup_pid;
    }
Chad Barb's avatar
Chad Barb committed
314

315 316
    if (! $TESTMODE) { 
	if (! $DISABLE_EVENTS) {
317
	    if ($type >= RETRY || ($update_Eventsys_restart && $type == UPDATE) ) {
318 319 320 321 322
		print "Stopping the event system\n";
		if (system("eventsys_control stop $pid $eid")) {
		    print STDERR "*** Failed to stop the event system.\n";
		    $swapout_errors = 1;
		}
323 324
	    }
	}
Chad Barb's avatar
Chad Barb committed
325

326
	#
Chad Barb's avatar
Chad Barb committed
327
	# Clean up any VLANs in experiment.
328
	#
Chad Barb's avatar
Chad Barb committed
329 330 331 332 333 334 335
	TBDebugTimeStamp("snmpit started");
	print STDERR "Removing VLANs.\n";
	if (system("snmpit -r $pid $eid")) {
	    print STDERR "*** Failed to reset VLANs\n";
	    $swapout_errors = 1;
	} else {
	    $cleanvlans = 0;
336
	}
Chad Barb's avatar
Chad Barb committed
337
	TBDebugTimeStamp("snmpit finished");
338
    }
Chad Barb's avatar
Chad Barb committed
339

340 341 342
    if ($type >= CLEANUP) {
	#
	# We're not attempting a retry;
343
	#
344
	# Stop all of the vnodes.
345
	#
346
	if (! $TESTMODE) { 	
347 348 349 350 351 352 353
	    print "Tearing down virtual nodes.\n";
	    TBDebugTimeStamp("vnode_setup -k started");
	    if (system("vnode_setup -d -k $pid $eid")) {
		print STDERR "*** Failed to tear down vnodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("vnode_setup finished");
354 355 356 357
	}

	#
	# remove all nodes from the experiment.
Chad Barb's avatar
Chad Barb committed
358
	# (nfree will send them to RES_FREE_DIRTY)
359 360 361 362 363 364 365 366
	#
	print STDERR "Freeing nodes.\n";
	TBDebugTimeStamp("nfree started");
	if (system("nfree $pid $eid")) {
	    print STDERR "*** Could not free nodes.\n";
	    $swapout_errors = 1;
	}
	TBDebugTimeStamp("nfree finished");
367 368 369 370 371

	#
	# Since this is an actual swapout, 
	# reset our count of swap out nag emails sent.
	#
372
	DBQueryWarn("update experiments set swap_requests='',sim_reswap_count='0' ".
373
		    "where eid='$eid' and pid='$pid'");
374 375
    } else {
	#
376
	# $type == RETRY or $type == UPDATE.
377 378
	# Therefore, don't deallocate nodes which have been successfully
	# incorporated into the experiment (i.e., are RES_READY).
Chad Barb's avatar
Chad Barb committed
379
	# (nfree will send deallocated nodes to RES_FREE_DIRTY)
380
	#
381 382 383 384 385 386 387 388
	my @failedpnodes = ();
	my @failedvnodes = ();
	
	my $db_result =
	    DBQueryFatal("select rv.node_id,n.allocstate,nt.isvirtnode ".
                         "  from reserved as rv ".
			 "left join nodes as n on n.node_id = rv.node_id ".
			 "left join node_types as nt on nt.type=n.type ".
389 390
			 "where rv.pid='$pid' and rv.eid='$eid'");

391
	while (my ($node,$allocstate,$isvirt) = $db_result->fetchrow_array) {
392
	    if ($allocstate ne TBDB_ALLOCSTATE_RES_READY()) {
393 394 395 396 397 398
		if ($isvirt) {
		    push(@failedvnodes, $node);
		}
		else {
		    push(@failedpnodes, $node);
		}
399 400 401
	    }
	}

402 403 404 405 406 407 408 409 410 411 412 413
	#
	# Tear down failed vnodes. Perhaps not needed?
	# 
	if (!$TESTMODE && @failedvnodes > 0) {
	    print "Tearing down failed virtual nodes.\n";
	    TBDebugTimeStamp("vnode_setup -k started");
	    if (system("vnode_setup -d -k $pid $eid @failedvnodes")) {
		print STDERR "*** Failed to tear down vnodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("vnode_setup -k finished");
	}
414

415 416 417 418
	#
	# Release all failed nodes.
	# 
	if (@failedpnodes > 0 || @failedvnodes > 0) {
419 420
	    print STDERR "Freeing failed nodes.\n";
	    
421
	    TBDebugTimeStamp("nfree started");
Chad Barb's avatar
Chad Barb committed
422 423 424 425 426
	    #
	    # Specify -x switch so when a physical node gets freed,
	    # any virtual nodes (owned by this experiment)
	    # sitting on top of it are freed as well.
	    #
427 428
	    if (system("nfree -x $pid $eid " .
		       join(" ", (@failedpnodes, @failedvnodes)))) {
429 430 431 432 433 434 435
		print STDERR "*** Could not free nodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("nfree finished");
	}
    }

436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459
    if (! $TESTMODE) {
	#
	# If the experiment has no Plab dslice nodes left, but still has
	# a Plab slice, destroy the slice
	#

	# Does the slice exist?
	$db_result =
	    DBQueryFatal("select slicename from plab_slices ".
			 "where pid='$pid' and eid='$eid'");

	if ($db_result->numrows) {
	    # Are there any dslice nodes left?
	    $db_result =
		DBQueryFatal("select n.node_id from nodes as n ".
			     "left join node_types as nt on n.type = nt.type ".
			     "left join reserved as r ".
			     " on r.node_id = n.node_id ".
			     "where r.pid='$pid' and r.eid='$eid' ".
			     " and nt.isplabdslice = 1");

	    if (!$db_result->numrows) {
		print "Destroying Planetlab slice.\n";
		TBDebugTimeStamp("plabslice destroy started");
460
		if (system("plabslice destroy $pid $eid")) {
461 462 463 464 465 466 467 468
		    print STDERR "*** Failed to destroy Plab dslice\n";
		    $swapout_errors = 1;
		}
		TBDebugTimeStamp("plabslice destroy finished");
	    }
	}
    }

469 470 471 472 473 474 475 476
    if (! $TESTMODE) {
	#
	# All of these errors are non-fatal on swapout. We find out about them
	# via email sent from the individual scripts.
	#

	#
	# Only reset mountpoints if this is an actual swapout, and
477
	# not a failed swapin(cleanup), update, or retry.
478
	#
479
	if ($type == REAL) {
480 481 482 483 484 485 486
	    print "Resetting mountpoints.\n";
	    TBDebugTimeStamp("exports started");
	    if (system("exports_setup")) {
		print STDERR "*** Failed to reset mountpoints.\n";
	    }
	    TBDebugTimeStamp("exports finished");
	}
Chad Barb's avatar
Chad Barb committed
487

488 489 490 491
	#
	# Resetting named maps and email lists is fast and idempotent,
	# so whatever.
	#
492 493 494 495 496 497
	print "Resetting named maps.\n";
	TBDebugTimeStamp("named started");
	if (system("named_setup")) {
	    print "*** WARNING: Failed to reset named map.\n";
	}
	TBDebugTimeStamp("named finished");
Chad Barb's avatar
Chad Barb committed
498

499 500 501 502 503 504 505 506
	print "Resetting email lists.\n";
	TBDebugTimeStamp("genelists started");
	if (system("genelists")) {
	    print "*** WARNING: Failed to reset email lists.\n";
	}
	TBDebugTimeStamp("genelists finished");
    }

507
    #
508 509 510
    # Wipe the DB clean except during UPDATE or RETRY. In those
    #    cases, assign_wrapper will reset the DB after reading
    #    the info.
511
    #
512 513 514 515
    if ( $type >= CLEANUP ) {
	print STDERR "Resetting DB.\n";
	TBExptRemovePhysicalState( $pid, $eid );
    }
516 517 518 519 520

    return $swapout_errors;
}

##
Chad Barb's avatar
Chad Barb committed
521
#
522 523
# doSwapin - Swaps experiment in.
#
Chad Barb's avatar
Chad Barb committed
524 525 526 527 528
#            Returns:
#              0 - successful swapin
#              1 - failed swapin; cleanup required.
#              3 - failed swapin; cleanup required; can retry.
#              7 - failed swapin; assign failed; no cleanup.
529 530
##

531
sub doSwapin($) {
Chad Barb's avatar
Chad Barb committed
532
    my $type = shift; # REAL==4, RETRY==2, UPDATE==1, UPDATE_RECOVER=0. 
533

534 535 536 537 538
    #
    # assign_wrapper does all the virtual to physical mapping 
    # and updating the DB state.
    #

Chad Barb's avatar
Chad Barb committed
539 540 541 542 543 544 545 546 547 548
    if ($type > UPDATE_RECOVER) {
	print "Mapping to physical reality ...\n";
	TBDebugTimeStamp("assign_wrapper started");

	#
	# Pass the -u (update) switch into assign_wrapper,
	# So any nodes already in the experiment are
	# fixed.
	#
	my $exitcode;
549
	my $wrapper = "assign_wrapper";
550
	
551
	if (system("$wrapper -u $pid $eid")) {
Chad Barb's avatar
Chad Barb committed
552 553
	    #
	    # save this off so it will get passed back later.
554
	    # Note that -1 is an uncontrolled error. No recovery.
Chad Barb's avatar
Chad Barb committed
555
	    #
556
	    $assignWrapperErrorCode = $? >> 8;
557 558 559 560 561
	    $exitcode = $? >> 8;

	    print STDERR "*** Failed ($exitcode) to map to reality.\n";

	    if (($exitcode & 64) && ($exitcode != 255)) {
562
		# so batchexp doesn't choke.
563 564 565
		$assignWrapperErrorCode -= 64
		    if ($exitcode != 255);
		# We can recover. 
Chad Barb's avatar
Chad Barb committed
566
		return 7;
567 568 569
	    }
	    else {
		# No recovery.
Chad Barb's avatar
Chad Barb committed
570 571 572 573
		return 1;
	    }
	}
	TBDebugTimeStamp("assign_wrapper finished");
574

Chad Barb's avatar
Chad Barb committed
575 576
	print "Mapped to physical reality!\n";
    }
577

578
    # Check cancel flag before continuing. No retry, 
579
    TBGetCancelFlag($pid, $eid, \$canceled);
580 581 582
    return 1
	if ($canceled);

583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620
    #
    # Look for any nodes in RES_TEARDOWN. These need to be released,
    # and if a virtnode, they need to be torn down. We cannot wait for
    # the virtnodes to go down with the physnode they are hosted on,
    # so teardown and release the virtnodes first, and then do the
    # physnodes.
    #
    # Errors are fatal; no recovery or retry.
    #
    if ($type == UPDATE) {
	my $allocstate = TBDB_ALLOCSTATE_RES_TEARDOWN();
	
	$db_result =
	    DBQueryFatal("select r.node_id,nt.isvirtnode,nt.isremotenode ".
			 "  from reserved as r ".
			 "left join nodes as n on n.node_id=r.node_id ".
			 "left join node_types as nt on nt.type=n.type ".
			 "where r.pid='$pid' and r.eid='$eid' and ".
			 "      n.allocstate='$allocstate'");

	if ($db_result->numrows) {
	    my @virtnodes = ();
	    my @physnodes = ();
	    
	    print "Tearing down and releasing unused nodes\n";

	    # First teardown/release virtnodes. 
	    while (my ($node,$isvirt,$isrem) = $db_result->fetchrow_array()) {
		if ($isvirt) {
		    push(@virtnodes, $node);
		}
		elsif (!$isrem) {
		    push(@physnodes, $node);
		}
	    }
	    if (@virtnodes) {
		TBDebugTimeStamp("vnode_setup started");
		
621
		if (system("vnode_setup -k $pid $eid @virtnodes")) {
622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640
		    print "Failed to tear down unused virtnodes!\n";
		    return 1;
		}
		TBDebugTimeStamp("vnode_setup finished");
		
		if (system("nfree $pid $eid @virtnodes")) {
		    print "Failed to nfree unused virtnodes!\n";
		    return 1;
		}
	    }
	    if (@physnodes) {
		if (system("nfree $pid $eid @physnodes")) {
		    print "Failed to nfree unused physnodes!\n";
		    return 1;
		}
	    }
	}
    }

641 642 643 644 645 646
    # Exit here if we are testing.
    if ($TESTMODE) {
	print "Testing run - Stopping here.\n";
	return 0;
    }

647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662
    #
    # Handle tarballs - we might need to fetch some from URLs if the user
    # asked for that.
    #
    print "Fetching tarballs and RPMs (if any) ...\n";
    TBDebugTimeStamp("tarfiles_setup started");

    if (system("tarfiles_setup $pid $eid")) {
	#
	# No recovery for now - what would we do?
	#
	print STDERR "*** Failed to set up tarballs.\n";
	return 1;
    }
    TBDebugTimeStamp("tarfiles_setup finished");

663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690
    #
    # If there are any Plab dslice nodes in the experiment, create the
    # dslice now
    #
    if ($type > UPDATE_RECOVER) {
	# Are there any Plab nodes?
	$db_result =
	    DBQueryFatal("select n.node_id from nodes as n ".
			 "left join node_types as nt on n.type = nt.type ".
			 "left join reserved as r on r.node_id = n.node_id ".
			 "where r.pid='$pid' and r.eid='$eid' ".
			 " and nt.isplabdslice = 1");

	if ($db_result->numrows) {
	    # Does slice already exist?
	    $db_result =
		DBQueryFatal("select slicename from plab_slices ".
			     "where pid='$pid' and eid='$eid'");

	    if (! $db_result->numrows) {
		my @plabnodes = ();
		
		while (my ($node) = $db_result->fetchrow_array()) {
		    push(@plabnodes, $node);
		}
		
		print "Creating Planetlab slice.\n";
		TBDebugTimeStamp("plabslice create started");
691
		if (system("plabslice create $pid $eid")) {
692 693 694 695 696 697 698 699
		    print STDERR "*** Failed to create Plab dslice\n";
		    return 3;
		}
		TBDebugTimeStamp("plabslice alloc finished");
	    }
	}
    }

700
    # Check cancel flag before continuing. No retry, 
701
    TBGetCancelFlag($pid, $eid, \$canceled);
702 703 704
    return 1
	if ($canceled);

705 706 707 708 709 710 711 712 713 714 715 716 717
    #
    # These things need to get started before the nodes come up, so we'll
    # do them before the os_setup. Everything else can done in parallel with
    # os_setup. (Actually, these probably can too, since they should finish
    # long before the nodes reboot, but better safe than sorry)
    #
    print "Setting up mountpoints.\n";
    TBDebugTimeStamp("mountpoints started");
    if (system("exports_setup")) {
	print STDERR "*** Failed to setup mountpoints.\n";
	return 1;
    }
    TBDebugTimeStamp("mountpoints finished");
Chad Barb's avatar
Chad Barb committed
718

719 720 721 722 723 724
    TBDebugTimeStamp("named started");
    print "Setting up named maps.\n";
    if (system("named_setup")) {
	print STDERR "*** WARNING: Failed to add node names to named map.\n";
	#
	# This is a non-fatal error.
Chad Barb's avatar
Chad Barb committed
725
	#
726 727
    }
    TBDebugTimeStamp("named finished");
Chad Barb's avatar
Chad Barb committed
728

729
    # Check cancel flag before continuing. No retry, 
730
    TBGetCancelFlag($pid, $eid, \$canceled);
731 732
    return 1
	if ($canceled);
Chad Barb's avatar
Chad Barb committed
733 734 735

    #
    # If user specified -reboot to update,
736
    # and we are successfully performing the update,
737
    # then mark all nodes in experiment so os_setup will reboot them.
Chad Barb's avatar
Chad Barb committed
738
    #
739 740 741
    if (($type == UPDATE) &&
	($updateReboot || $updateReconfig)) {
	print STDERR "Marking nodes for reboot/reconfig.\n";
Chad Barb's avatar
Chad Barb committed
742
	$db_result =
743 744 745
	    DBQueryFatal("select r.node_id,n.allocstate from reserved as r ".
			 "left join nodes as n on n.node_id=r.node_id ".
			 "where r.pid='$pid' and r.eid='$eid'");
Chad Barb's avatar
Chad Barb committed
746

747 748 749 750 751 752 753 754
	while (my ($node,$allocstate) = $db_result->fetchrow_array) {
	    #
	    # If the node is INIT_CLEAN, leave it alone. It will still get
	    # rebooted, but will not falsely be tagged as dirty. This is
	    # important for vnodes too, where INIT_CLEAN indicated the vnode
	    # does not even exist yet (plab nodes).
	    #
	    if ($allocstate ne TBDB_ALLOCSTATE_RES_INIT_CLEAN()) {
755 756 757 758
		TBSetNodeAllocState($node,
				    ($updateReboot ?
				     TBDB_ALLOCSTATE_RES_INIT_DIRTY() :
				     TBDB_ALLOCSTATE_RES_RECONFIG()));
759
	    }
Chad Barb's avatar
Chad Barb committed
760 761 762
	}
    }

763 764 765 766 767 768 769 770 771 772 773 774
    #
    # Since it'll take a while for the nodes to reboot, we'll start now, and
    # wait for the os_setup to finish, down below
    #
    print "Resetting OS and rebooting.\n";
    TBDebugTimeStamp("os_setup started");
    if (!($os_setup_pid = fork())) { 
	exec("os_setup $pid $eid") or return 1;
    } elsif ($os_setup_pid == -1) {
	print STDERR "*** Fork failed.\n";
	return 1;
    }
Chad Barb's avatar
Chad Barb committed
775

776
    #
777 778 779 780 781
    # XXX
    # Don't add any steps between here and the waitpid() call below
    # without verifying that 1) It's OK for nodes to come up before
    # the step has completed and 2) It's OK for the command to run in
    # parallel with os_setup (no DB dependencies, etc.)
782 783 784 785 786 787 788 789 790
    #

    print "Setting up VLANs.\n";
    TBDebugTimeStamp("snmpit started");
    if (system("snmpit -t $pid $eid")) {
	print STDERR "*** Failed to set up VLANs.\n";
	return 1;
    }
    TBDebugTimeStamp("snmpit finished");
Chad Barb's avatar
Chad Barb committed
791

792 793 794 795
    #
    # An error now means that the VLANS need to be cleaned up.
    #
    $cleanvlans = 1;
Chad Barb's avatar
Chad Barb committed
796

797 798 799 800 801 802 803 804 805
    print "Setting up email lists.\n";
    TBDebugTimeStamp("genelists started");
    if (system("genelists")) {
	print STDERR "*** WARNING: Failed to update email lists.\n";
	#
	# This is a non-fatal error.
	# 
    }
    TBDebugTimeStamp("genelists finished");
Chad Barb's avatar
Chad Barb committed
806

807 808 809 810 811 812 813 814 815 816 817 818 819 820
    #
    # Don't clear port counters on UPDATE.
    # (XXX should clear new nodes' port counters.)

    if ($type >= RETRY) {
	print "Clearing port counters.\n";
	TBDebugTimeStamp("portstats started");
	if (system("portstats -z -a -q $pid $eid")) {
	    print STDERR "*** WARNING: Failed to clear port counters.\n";
	    #
	    # This is a non-fatal error.
	    # 
	}
	TBDebugTimeStamp("portstats finished");
821
    }
Chad Barb's avatar
Chad Barb committed
822

823 824 825 826 827 828 829 830 831
    #
    # OK, let's see how that os_setup did
    #
    $kid = waitpid($os_setup_pid,0);
    if ($kid == $os_setup_pid) {
	undef $os_setup_pid; # Make sure doswapout() doesn't wait for it.
	if ($CHILD_ERROR) {
	    print STDERR "*** Failed to reset OS and reboot nodes.\n";
	    #
832 833
	    # Use returncode from os_setup process to
	    # set global $retry flag, indicating to caller
834 835 836
	    # that it may be beneficial to attempt
	    # a doSwapin() again.
	    #
837
            if (($CHILD_ERROR >> 8) == 1) {
Chad Barb's avatar
Chad Barb committed
838
		return 3;
839 840
	    } else {
		print STDERR "Not retrying due to error type.\n";
Chad Barb's avatar
Chad Barb committed
841
		return 1;
842
	    }
843 844 845 846 847 848 849
	}
    } else {
	undef $os_setup_pid;
	print STDERR "*** Error waiting for os_setup to finish.\n";
	return 1;
    }
    TBDebugTimeStamp("os_setup finished");
Chad Barb's avatar
Chad Barb committed
850

851 852 853 854
    #
    # Okay, start the event system now that we know all the nodes have
    # rebooted (os_setup is done). This only takes a moment (puts itself
    # in the background), so its not enough of a delay to worry about.
855 856
    # Don't do this during an update, since we didn't kill the 
    # event system previously, so starting it again will fail!
857 858
    # 
    if (! $DISABLE_EVENTS) {
859 860
	if ( $update_Eventsys_restart || 
	    ($type != UPDATE && $type != UPDATE_RECOVER) ) {
861 862 863 864 865 866 867
	    print "Starting the event system.\n";
	    TBDebugTimeStamp("eventsys_control started");
	    if (system("eventsys_control start $pid $eid")) {
		print STDERR "*** Failed to start the event system.\n";
		return 1;
	    }
	    TBDebugTimeStamp("eventsys_control finished");
868 869
	}
    }
Chad Barb's avatar
Chad Barb committed
870

871 872
    return 0;
}