UPDATING 28.3 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Information necessary for keeping boss and ops node up-to-date. This
file contains updates that must be made outside of the database and
the install tree (ie. /usr/testbed).

This file is in the same format at the FreeBSD UPDATING file, whis is
to say, in reverse chronological order, with the date of the change
in YYYYMMDD format.

After each date, you will find one of the following, which tells you
when the action needs to be performed.

Before build - before doing a 'gmake' in your testbed object tree on
	boss and/or ops	
After install - after doing a 'gmake boss-install' on boss or
    'gmake ops-install' on ops

Note that some instructions may have steps that need to occur at a few
different points in the install process - these are marked with the
earliest time one of the steps needs to occur.

21
22
20080905: After install

23
24
25
          In order to reduce the size of the main database, data in
          the "log" table is now moved to the errorlog database and
          old entries are removed.
26

27
          First off, create the errorlog database:
28
29
30
31
32
33
34
35
36
37
38
39
40
41

            mysqladmin create errorlog
            mysql errorlog < sql/database-create-errorlog.sql

          Than install a crontab entry to run dumperrorlog every hour
          by adding the following line to /etc/crontab, be sure to
          preserve the embedded tabs:

            12	*	*	*	*	root	/usr/testbed/sbin/dumperrorlog

	  dumperrorlog will only move 300,000 rows at a time in order
	  to avoid locking the log table for too long.  Thus it will
          take a while for it to get caught up.

42
43
44
45
46
47
48
49
50
51
52
20080805: Optional, After install.

          As a result of moving the documentation to the WIKI there
          are many left over files that the normal install process
          doesn't remove.  To get ride of them run the script:

            sudo sh utils/remove_old_www

          in the obj directory.  All this file is, is a series of rm
          commands.

53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
20080506: After install.

	  A bug introduced on 2007/10/19 caused the "ezid" flag to not
          be properly set when creating an image using the "easy" form.
          The net effect of this is that OSID where not being properly
          deleted when the image id was.  The following two queries
          will clean up the mess the bug introduced.

             update images set ezid = 1 where not ezid and 
               exists (select 1 from os_info where osid=imageid and ezid);
             delete from os_info where ezid and osid 
               not in (select osid from osidtoimageid);
           
          Both queries are safe to run, even if you where not affected
          by the bug.

20080501: Before install.

	  Create the per project admin mailing lists if you enabled
	  mailman support (MAILMANSUPPORT set to 1 in defs file).

          This should be done before the final boss-install.
          Unfortunately, it also depends on some modification
          associated with this commit.  Thus do the following

            1) Go to build tree
            2) Reconfigure and build but don't install
            3) Do a "gmake install" in "collab/mailman/".
            4) Go to source tree and run the script
                 sql/create-projadminlists.pl
            5) Go back to build tree and do a "gmake boss-install"

          The script will take a while to run so be patent (It took
          around an hour for Utah's emulab).  It will also create a
          lot of output so you might want to redirect stdout.

20080219: After install:

          The newnode MFS ssh keys have been updated from protocol 1
          to protocol 2 (rsa key). The new keys were installed in
          /usr/testbed/etc by the top level install target. If you
          plan to add new nodes to your testbed you will want to put the
          new key into the newnode MFS. Do the following as root:

	  mdconfig -a -t vnode -u 1 -f /tftpboot/freebsd.newnode/boot/mfsroot
  	  mount /dev/md1 /mnt
          cat install/newnode_sshkeys/identity >>/mnt/root/.ssh/authorized_keys
 	  umount /dev/mnt
	  mdconfig -d -u 1
	  cd /tftpboot/freebsd.newnode/boot; ./prepare

20070511: Before build.

	  Install the new publish/subscribe system which is replacing Elvin.
	  DO THIS ONLY IF YOU ARE AN EXISTING SITE WITH ELVIN INSTALLED!
	  On both boss and ops, do the following:

	  * Grab and install the package:

		cd /var/tmp
		fetch http://www.emulab.net/downloads/pubsub-elvincompat-0.8.tbz
		sudo pkg_add /var/tmp/pubsub-elvincompat-0.8.tbz

          * Add this line to your defs file:

		ELVIN_COMPAT=1

            and reconfig/rebuild/reinstall on bother boss and ops.

	  * Add these lines to /etc/syslog.conf on boss and ops:

		!pubsubd
		*.*	/usr/testbed/log/pubsubd.log

            and also this line to /etc/syslog.conf on ops:

		!elvin_gateway
		*.*	/usr/testbed/log/elvin_gateway.log

	  * Create logfile and restart syslog:

		sudo cp /dev/null /usr/testbed/log/pubsubd.log
		sudo kill -HUP `cat /var/run/syslog.pid`

	  * Start pubsubd:

		sudo /usr/local/etc/rc.d/2.pubsubd.sh start

	  * ON OPS ONLY: start the elvin gateway:

		sudo /usr/local/etc/rc.d/3.elvin_gateway.sh start

	  * ON BOSS ONLY: disable elvind:

		sudo rm -f /usr/local/etc/rc.d/2.elvind.sh

20070320: Time to upgrade your tftpd.  This has only been tested on
	  FreeBSD 6.x, so if you are still running FreeBSD 4.10, then
	  you can skip this.  The only significant difference (other
	  than going from version 0.33 to 0.48, which is ancillary) is
	  a change to make tftpd work better under load when it hits its
	  "maxchildren" limit.

	  * See if your tftpd is already up to date on your boss:

		pkg_info -E 'emulab-tftp-hpa-*'

	    If it reports anything other than "emulab-tftp-hpa-0.48",
	    you should continue.

	  * Grab the new package:

		cd /var/tmp
		fetch http://www.emulab.net/downloads/emulab-tftp-hpa-0.48.tbz

	  * Shutdown and deinstall the old server:

		sudo /usr/local/etc/rc.d/tftpd-hpa.sh stop
		sudo pkg_delete -f emulab-tftp-hpa-0.33

	  * Install and start the new server:

		sudo pkg_add /var/tmp/emulab-tftp-hpa-0.48.tbz
		sudo /usr/local/etc/rc.d/tftpd-hpa.sh start

	  If you do want to update in a FreeBSD 4.10 environment, you will
	  have to build from it from the port.  Make sure you have the
	  recommended port tree installed as /usr/ports and then:

		cd <emulab-srcdir>/install/ports; sudo ./ports-install
		cd /usr/ports/misc/emulab-tftp-hpa
		sudo make
		sudo /usr/local/etc/rc.d/tftpd-hpa.sh stop
		sudo pkg_delete -f emulab-tftp-hpa-0.33
		sudo make install
		sudo /usr/local/etc/rc.d/tftpd-hpa.sh start

20070317: Before build.

          Due to a change in gcc's handling of c++ bools in functions with
          variable argument lists, you will need to reinstall ulsshxmlrpcpp and
          rebuild/reinstall in your testbed source tree so that the event
          system is recompiled against the new version.

	  * Grab this file from our website and unpack it somewhere convenient
            on your boss node:

                http://www.emulab.net/downloads/ulsshxmlrpcpp-0.1.2.tar.gz

          * Unpack, configure, build, install:

	        cd someplace
		tar xzf ulsshxmlrpcpp-0.1.2.tar.gz
		mkdir ulbuild
		cd ulbuild
		../ulsshxmlrpcpp-0.1.2/configure
		gmake && gmake install

	  * Rebuild your testbed source tree:

	        cd testbed-build-dir
		gmake && gmake install

20061201: Time to upgrade your mysql ... If you are still running
          FreeBSD 4.10 on your boss node, then you are almost certainly
          running an ancient version of mysql (3.23). In lieu of upgrading
          to FreeBSD 6.1 (the "right" solution, albiet very time
          consuming), you can upgrade your mysql in place. Here is how:

	  * Grab this file from our website and place it someplace on your
	    boss node with at least 250MB of disk space:

		http://boss.emulab.net/downloads/mysql-5.0.27.tar.gz

          * Unpack it:

		cd someplace
		tar zxf mysql-5.0.27.tar.gz

	  * Configure:

		cd mysql-5.0.27
		./configure --localstatedir=/var/db/mysql \
			--without-debug \
			--with-readline \
			--without-libedit \
			--without-bench \
			--without-extra-tools \
			--with-libwrap \
			--with-mysqlfs \
			--with-low-memory \
			--with-comment='FreeBSD build for Emulab' \
			--enable-thread-safe-client

	   * Build and install:

		make
		sudo make install

           * You want to grab a new version of this file from emulab:

		http://boss.emulab.net/downloads/2.mysql-server.sh.in

	     and place it in your testbed source directory, in the rc.d
	     subdir. Then go to your object tree, cd into the rc.d
	     directory and type gmake. You probably just want to copy the
	     new file out to /usr/local/etc/rc.d/ instead of doing an
	     install.

           * Reboot your boss node.
		

20060831: Mysql.pm needs to be patched on boss

     This needs to be done before installing rev 1.254 of db/libdb.pm.in

     Locate Mysql.pm which should be somewhere in 
     /usr/local/lib/perl5/site_perl:

       find /usr/local/lib/perl5/site_perl -name Mysql.pm

     Than go into the "patches" directory apply the patch "Mysql.pm.patch":

       patch /usr/local/lib/perl5/site_perl/.../Mysql.pm < Mysql.pm.patch

     Replacing "/usr/local/lib/perl5/site_perl/.../Mysql.pm" with the real
     location of Mysql.pm on your system.

20060717:
     Watch out for revision 4.74 in sql/database-migrate.sql ... You want
     to do that revision by hand so that you do not lose important data.

     (Some sites script the contents of sql/database-migrate.sql)

20060606:

      Be sure to firewall the mysql port (3306) at your router so that
      outside networks cannot access that port on your ops node (we now
      run mysqld on ops).

20060525:  Do this before installing tbsetup/libtblog.pm.in rev 2.14
      It would be best if your Emulab was down during this change.

      No schema changes, but due to a bug in libtblog.pm.in the uid &
      exptidx columns got swapped for new values inserted into the
      session_info table after the 4.56 schema change.  This is fixed
      in revision number 2.14 of libtblog.pm.in.

      The values of session_info are currently not used by any testbed
      code.  However, it is still a good idea to fix the existing data
      in the database.  To do so determine the "session" where the
      values got swapped.  For emulab.net that was 9359824:

      +---------+-------+---------+
      | session | uid   | exptidx |
      +---------+-------+---------+
      | 9359747 | 31359 | 24893   |
      | 9359824 | 24893 | 31359   |
      +---------+-------+---------+

      Once this is determined, lock the session_info table, swap
      the columns, install the fix, than unlock the table:

        lock tables session_info write;
      
        create temporary table session_info_wk as select * from session_info
          where session >=SESSION;
        replace into session_info select session,exptidx,uid 
          from session_info_wk;
        drop table session_info_wk;

        [Now install the new code]
  
        unlock tables;

      Where SESSION is the session number where the values where first 
      swapped, 9359824, for emulab.net.

20060322: Before installing tbsetup/ns2ir/sim.tcl.in rev 1.109 (3/22/06).

	This revision introduces a new features/desire pair called
	"firewallable".  All nodes in a firewalled experiment require
	this feature from a node.  So you will need to do:

        insert into node_type_features values ('TYPE','firewallable',0);

	for every node type 'TYPE' which can participate in a firewalled
	experiment.  The current requirement for a 'firewallable' node
	is that it can be powered off (not just power cycled).  This is
	required for proper post-swapout cleaning of nodes.  Another
	attribute to consider is whether you can prevent a node from
	booting anywhere other than the network.  If you have nodes that
	can timeout from PXE boot and that will fall back to booting from
	the hard drive, you may want to NOT make those nodes 'firewallable'.

20051212: After DB schema is updated, and updated software installed.

         These changes are for shifting from SSH protocol 1 keys to
         protocol 2 keys.

         For users:

	        wap /usr/testbed/sbin/genpubkeys

         this will generate new Protocol 2 (rsa) keys for all users,
         and regen their authorized_keys file. Note that existing sites
         will need to retain protocol 1 keys for users because of old
         images.

         For boss and ops:

         You must setup a new passphraseless keypair for root on boss.
         To do this, simply run the following command on boss:

                sudo /usr/bin/ssh-keygen -t rsa -N ""

         Next, append the contents of /root/.ssh/id_rsa.pub on boss to
         the /root/.ssh/authorized_keys file on both your ops and boss
         nodes.  Remove any ssh version 1 keys that appear in either
         of these authorized_keys files.  Also, remove the
         authorized_keys2 file (if it exists) from the /root/.ssh
         directory on boss and ops.  Next, change the
         /etc/ssh/sshd_config (sshd config) file on both boss and ops
         to try ssh protocol 2 first: Edit the line that reads
         "Protocol 1,2" to be "Procotol 2,1".  Finally, be sure to
         remove any "Protocol" directives from /root/.ssh/config on
         boss and ops.

         In your database:

         You'll need to update the key stored in the node/ssh_pubkey
         variable to contain the public half of the new v2 rsa key you
         created for root on boss.  This key will be automatically
         distributed to the nodes as they boot up when using images
         dating from late 2004 onward.

         For your default disk images:

         Add the contents of /root/.ssh/id_rsa.pub on your boss node
         to the /root/.ssh/authorized_keys file in each of your
         default disk images.  Remove any version 1 ssh keys that
         remain in authorized_keys.  Also, remove any authorized_keys2
         file that might exist in the /root/.ssh directory.  Next,
         edit the /etc/ssh/sshd_config file, changing the "Procotol
         1,2" line to "Protocol 2,1".  Re-create the modified images
         (of course).

         Note on user disk images:

         User images may still require access via ssh version 1, so
         don't delete the ssh version 1 key on your boss node
         (/root/.ssh/identity[.pub]).  The ssh wrapper command (sshtb)
         has been modified to try authenticating with both ssh protocols
         to preserve backward compatibility with existing user images.


20051212: After DB schema is updated, and updated software installed.

          Fix an error in the statistics gathering code, that was
          causing duplicate swapin records in some case. From the source
          directory:

		perl sql/fixstats-swapin.pl | mysql tbdb


20050818: Anytime after the DB schema is updated

	Load the initial contents of the new knowledge_base_entries table
        from sql/knowlbase-create.sql

		cat sql/knowlbase-create.sql | mysql tbdb


20050707: Before build

	Decide if you want CVS support turned on. This is some simple
        support for per-project CVS trees, stored as /proj/$pid/CVS.
        The main thing is that you can use the cvsweb interface. If you
        want it, in your defs file:

		CVSSUPPORT=1

	After your build and install:

		sudo /usr/testbed/sbin/cvsinit

        which creates the initial CVS trees in all of the existing project
        trees.

20050205: Before build/config

	* Install the rsync port from /usr/ports/net/rsync


20041108: Anytime

	* Update sql/database-fill-suplement.sql stuff.

		cat sql/database-fill-suplement.sql | mysql tbdb

20041108: Before build
	We've fixed a bug in the elvin libraries that underlie our
	event system. You'll want to install the new one from the
	port. You need to do this on both boss and ops. Copy the
	contents of install/ports/libelvin to /usr/ports/misc/libelvin.
	Then, change to that directory and run 'make deinstall reinstall'
	to get the new version of the port installed. Now, you'll need to
	do a clean rebuild of everything in the testbed source tree, by
	doing a 'gmake clean' before the usual 'gmake ops-install' and
	'gmake boss-install'.

20041104: Before build
	A new directory, pxe/freebsd, contains the diffs necessary
	to build your own pxeboot program more easily.  The entry
	for 20040112 below instructs you to "Rebuild pxeboot kernel
	from source".  Now you can actually do that!  See the README
	file in pxe/freebsd.  You should rebuild your pxeboot program
	to take advantage of a couple of new features: the ability
	to specify an explicit machine from which to TFTP load a file,
	and the ability to specify command lines to Linux (actually,
	to LILO).

	You will need to update your frisbee/freebsd MFSes to take
	full advantage of recent changes.  A new file, doc/update-mfs.txt,
	describes the process.  Read it. Believe it. Live by it.

20041029: Before build
	The ulsshxmlrpcpp package was updated to version 0.1.1:

	     http://boss.emulab.net/downloads/ulsshxmlrpcpp-0.1.1.tar.gz

             cd /someplace
	     tar zxf ulsshxmlrpcpp-0.1.1.tar.gz
	     cd ulsshxmlrpcpp-0.1.1
	     configure
	     gmake
	     sudo gmake install

20041027: After install (be sure to update sitevars):

	A new sitevariable was added to hold root's ssh public key.
	When nodes boot using the latest image, the public key is
	handed across via tmcd and statshed in /root/.ssh. This
	localizes the image (wrt the root pub key) to the local
	testbed.

	Using the web interface in red dot mode, go to the Edit Site
	Variables link and store boss:/root/.ssh/identity.pub into the
	"node/ssh_pubkey" site variable. Make sure there are no
	newlines when you paste it in.

20041025: After install

	Run sql/fixstats_swapmod.pl to fix up stats records.

		sql/fixstats_swapmod.pl | mysql tbdb

	Run "/usr/testbed/etc/rc.d/and start" as root on ops to start
	up the auto nice daemon.  This daemon is not required,
	however, it can save you from greedy users that consume too
	much CPU and cause experiment swapin to fail.

20040930: Before build

	You need to update your defs-* file to include some new configure
	time variables.  These are:

	SSLCERT_COUNTRY
	SSLCERT_STATE
	SSLCERT_LOCALITY
	SSLCERT_ORGNAME
	TESTBED_NETWORK
	TESTBED_NETMASK
	BOSSNODE_IP
	USERNODE_IP
	CONTROL_ROUTER_IP
	CONTROL_NETWORK
	CONTROL_NETMASK
	PRIVATE_NETWORK
	PRIVATE_ROUTER
	PRIVATE_NETMASK
	PUBLIC_NETWORK
	PUBLIC_ROUTER
	PUBLIC_NETMASK
	DHCPD_DYNRANGE

	See defs-example for details.
	YOU MUST RERUN configure AFTER SETTING THESE!

20040901: Before build
	New SSL version of the XMLRPC server.

	* Make sure python is installed on both boss and ops. If not,
          the port is located in:

		/usr/ports/lang/python		

	* Install this port on both boss and ops:

		/usr/ports/security/py-m2crypto

          then patch a silly bug on both boss and ops:

		patch -f -p0 -l -i patches/m2crypto.patch

	* Reconfig, rebuild, and reinstall the testbed software on your
	  boss node. Be sure to pick up changes in sql/database-migrate.

	* Install some ssl files on boss:

		cd /usr/object/tree/ssl
		gmake usercert-install

        * Install new version of testbed startup script on boss
	  
		cd /usr/object/tree/rc.d
		sudo gmake install

        * Generate SSL certificates for existing emulab users

		cd /usr/src/tree/sql
		./initcerts.pl

	* Add the following lines to /etc/syslog.conf on boss

	  !sslxmlrpc
	  *.*                            /usr/testbed/log/sslxmlrpc.log

	* Add the following line to /etc/newsyslog.conf on boss

	  /usr/testbed/log/sslxmlrpc.log          640  7     1000 *     Z

        * Create the log file and restart syslog on boss
	
		sudo touch /usr/testbed/log/sslxmlrpc.log
		sudo kill -HUP `cat /var/run/syslog.pid`

        * Fire up the SSL XMLRPC server

		sudo /usr/testbed/sbin/sslxmlrpc_server.py


20040816: Before build
	The event system has moved to users.emulab.net.

	* Install the elvin libraries and daemon on users.emulab.net.

	* Pick up this package:

	     http://boss.emulab.net/downloads/ulsshxmlrpcpp-0.1.0.tar.gz

             cd /someplace
	     tar zxf ulsshxmlrpcpp-0.1.0.tar.gz
	     cd ulsshxmlrpcpp-0.1.0
	     configure
	     gmake
	     sudo gmake install

	* Install this port (might already be install).

		/usr/ports/databases/py-MySQLdb

	* Reconfig, rebuild, and reinstall the testbed software on your
	  boss node.

	* Reconfig, rebuild, and reinstall the testbed software on your
          users node. 

		ssh users
		cd /your/object/tree/obj/
		gmake ops-install

        * Install the new elvind config file on boss and restart elvind
          Note that this is not done as part of toplevel install.

		cd /your/object/tree/obj/event/etc
		sudo gmake install
		sudo /usr/local/etc/rc.d/2.elvind.sh stop
		sudo /usr/local/etc/rc.d/2.elvind.sh start

	* Restart tmcd and stated on boss (note that if you plan to just
	  reboot boss, a lot of these steps can be skipped).

		sudo /usr/testbed/sbin/tmcd.restart
		sudo kill -USR1 `cat /var/run/stated.pid`

        * Install the elvind config file on users.
          Note that this is not done as part of toplevel install.

		ssh users
		cd /your/object/tree/obj/event/etc
		sudo gmake control-install

	* Install new rc.d file on boss.
          Note that this is not done as part of toplevel install.

		cd /your/object/tree/obj/rc.d
		sudo gmake install

        * Install the rc.d file that starts elvind on users.
          Note that this is not done as part of toplevel install.

		ssh users
		cd /your/object/tree/obj/rc.d
		sudo gmake control-install

        * Start the elvin server on users.emulab.net:

		ssh users
		sudo /usr/local/etc/rc.d/2.elvind.sh start

	* Create the ops certificate (on boss) and copy it to your users node.

		cd /your/object/tree/obj/ssl
		gmake ctrlnode.pem
		sudo scp ctrlnode.pem users:/etc/emulab/client.pem
		sudo ssh users chmod 600 /etc/emulab/client.pem
		sudo scp emulab.pem users:/etc/emulab

        * Install the tmcd client stuff on users.emulab.net.

		ssh users.emulab.net
		cd /your/object/tree/obj/tmcd/freebsd
		sudo gmake control-install

	* Update sql/database-fill-suplement.sql stuff.

		cat sql/database-fill-suplement.sql | mysql tbdb

        * Create the emulab-ops/opsnode experiment. Do this the same way
          that hwdown is created in setup-db.txt. 

          Then go to the experiment information page (in red dot mode)
          for the emulab-ops/opsnode experiment, and then click on the
          "Edit Experiment MetaData". In the "Swapping" Section, make
          sure Idle Ignore is checked, and the other three entries
          (Swappable, Idle-Swap, Max Duration) are unchecked.

	* Make sure your source tree on ops is updated. Then, from that source
	  tree, run 'install/newclient -o'. (Note: You will probably have to
	  turn on the 'executable bit' for this script before running it, with
	  'chmod a+x install/newclient'.) This will allow ops to check into the
	  testbed.

	* On boss, run: 'wap /usr/testbed/libexec/newnode ops' to actually add
	  ops to the database.

	* Place the ops node into the above experiment:

		wap nalloc emulab-ops opsnode ops

	* Make sure that netcat is installed.

		cd /usr/ports/net/netcat
		sudo make
		sudo make install
		
	* Add entry to /etc/services for elvin:

		elvin		2917/tcp

	* Change the CNAME event-server to your zone file from boss to ops.

		event-server	IN	CNAME	ops

	* Start the alternate inetd service so that old images trying to
	  connect to the event server are redirected to users.emulab.net.
	  Be sure to replace boss.foo.bar with the right name.

		sudo inetd -a boss.foo.bar -p /var/run/testbed-inetd.pid \
			/usr/testbed/etc/inetd.conf

	* Stick boss's host keys onto ops so that users do not get
	  those silly questions about adding know hosts.

		sudo cat /etc/ssh/*.pub |
			ssh ops '(cat > /etc/ssh/ssh_known_hosts)'

20040815: After install
	After some changes to ptopgen, you'll need to run the following SQL
	command to keep vnodes working properly:

	update os_info set nextosid='FBSD-STD' \
	    where osid='emulab-ops-FBSD-JAIL';

20040809: After install
	New syslog file for logging requests to the XMLRPC server.

		sudo touch /usr/testbed/log/xmlrpcbag.log

	Add these two lines to /etc/syslog.conf and then HUP syslogd:

		!xmlrpcbag
		*.*                      /usr/testbed/log/xmlrpcbag.log

        Add this line to /etc/newsyslog.conf:

		/usr/testbed/log/xmlrpcbag.log      640  7     1000 *     Z

20040805: After install
	Add a new CNAME for boss to /etc/namedb/<OURDMAIN>.db.head -
	event-server . Re-run named_setup on boss to make this change
	take place. In the future, we may move this CNAME to ops.

20040713: After install
	For new distributed routing support, must first run this script as
        root to generate a data file for each existing experiment.

		sudo sql/gentopmaps.pl

20040625: After install
	After updating to revision 1.257 of sql/database-migrate.txt,
        run sql/devlnodes.pl to clear out all of the non reserved
        pcvm nodes. Be sure to do a current install of the software, and
        then:

		update node_types set isdynamic=1 where type='pcvm';

20040615: Before build
	If you update the ports on your boss node, you'll need to take
	into accout that FreeBSD is in the process of changing how its
	rc.d scripts work - add the following two lines to the bottom
	of your /etc/rc.conf on boss:
	  dhcpd_enable="YES"
	  apache_enable="YES"

20040601: Before build
	The p5-Time-HiRes port is now required on both boss and ops -
	install it from /usr/ports/devel/p5-Time-HiRes .

20040420: Before build
	Switched web search button backend from webglimpse to swish-e.
        Just need to go to /usr/ports/www/swish-e and install the port.

20040315: Before build

	XMLRPC Server. Install this port:

		/usr/ports/databases/py-MySQLdb

20040303: Before build
	Fixed the way we handle the certificate for capture with tiptunnel.
	We no longer hard-code the certificate digest in nodetipacl.php3 .
	However, as a result, we must place this fingerprint in a publically-
	readable file on boss. So, if you have serial lines that you're
	running with capture:
	1) Copy your /usr/testbed/etc/capture.pem file from your tipserver to
	boss, if it isn't there already.
	2) In /usr/testbed/etc/ on boss, run: 'openssl x509 -sha -noout
	-fingerprint -in capture.pem > capture.fingerprint', and make this
	file world-readable.

20040302: Before build
	Changed the length of the node_id columns from 10 to 32. Make sure
	you re-compile and restart all daemons written in C (such as
	tmcd, tevd, and the event schedulers) before putting any nodes in
	the database with names longer than 10 characters.

20040226: After install
	Re-worked the way named_setup handles virtual nodes and unroutable
	IP addresses - no point in handling the two differently. Thus, the
	'vnodes.<OURDOMAIN>.db' DNS zone file is no longer generated.
	Instead, if you have a mix of routable and unroutable IP addresses,
	you'll need to switch to using the '<OURDOMAIN>.internal.db' zone
	file - see Step 6 of doc/setup.txt for instructions on setting up
	this file.

20040202: Before install:

	batchexp -q -i -w -f -n -S 'System Experiment' \
             -L 'System Experiment' \
             -E 'Nodes in limbo during nfree - DO NOT DELETE' \
             -p emulab-ops -e nfree-locked

20040121: After install
	Changed the 3.testbed.sh rc.d script to handle 'start' and 'stop'
	arguments properly. Install a fresh copy of rc.d/3.testbed.sh into
	/usr/local/etc/rc.d .

20040120: After install
	Bumped up the sizes on some buffers to help network performance.
	Add the following two lines to /etc/sysctl.conf:

	net.local.dgram.maxdgram=65536
	net.local.dgram.recvspace=65536


20040112: After install
       Big change to bootinfo sequence.

       * Update DB with new contents of sql/database-fill.sql *and
         sql/database-fill-suplement.sql.
       * Rebuild pxeboot kernel from source (src/sys/boot/i386/emuboot).
         Install emuboot to /tftpboot/pxeboot.emu
       * Install new version of dhcpd.conf file that has all the PXE
         crap removed and includes the single line:

		filename "/tftpboot/pxeboot.emu";

       * Restart dhcpd. 
       * Kill proxydhcp. Be sure to install new 3.testbed.sh from the
         rc.d directory to /usr/local/etc/rc.d, or just edit in place
       * Restart bootinfo.
       * Restart stated.
       * Reboot all non allocated nodes so that they go into pxewait mode.

20031215: Before build
	The mod_php4 port on boss should be recompiled with the
	'xmlrpc' option, in addition to the 'mhash' option already
	used. Apache on boss will need to be restarted after the new
	port is installed.