ptopgen.in 22.8 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2
3
4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6
7
8
# All rights reserved.
#

9
10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12
13
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
14
15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
16
	  "       -p include nodes the project has permission to use\n".
17
	  "       -e include given experiments resources\n" .
18
19
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
20
	  "       -r Include stuff for topologies with widearea nodes\n".
21
	  "       -s Include stuff for topologies with simulated nodes\n".
22
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23
24
	  "       -m Override multiplex_factor\n".
	  "       -n Add in modelnet core and edge node features\n");
25
26
    exit(-1);
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
my $optlist = "s:e:m:vp:rSan:";
28
my $mfactor;
29
my $virtstuff = 0;
30
my $widearea  = 0;
31
my $simstuff  = 0;
32
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
33
34
my $mnetcores = 0;
my $mnetedges = 0;
35

36
37
38
39
#
# Turn off line buffering on output
#
$| = 1;
40
41
42
43
44
45
46
47
48
49
50
51

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

52
53
54
55
56
57
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

58
59
######################################################################

60
my $TBROOT = "@prefix@";
61
use lib '@prefix@/lib';
62
require exitonwarn;
63
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
64

65
66
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

67
68
69
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
70
71
my %typemap       = ();
my %auxtypemap    = ();
72

73
74
75
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

76
my $pid;
77
my $exempt_eid;
78
my $switchtouse;
79

80
81
82
83
84
85
86
87
88
89
90
91
92
93
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
94
95
96
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
97
98
99
if (defined($options{"v"})) {
    $virtstuff = 1;
}
100
101
102
if (defined($options{"r"})) {
    $widearea = 1;
}
103
104
105
if (defined($options{"S"})) {
    $simstuff = 1;
}
106
107
108
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
109
110
111
if (defined($options{"a"})) {
    $allnodes = 1;
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
112
113
114
115
116
117
118
119
120
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
121
if (defined($options{"e"})) {
122
123
124
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
125
126
}

127
# Read class/type maps
128
my $result =
129
    DBQueryFatal("select class,type,delay_capacity,".
130
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
131
		 "   speed, RAM, trivlink_maxspeed ".
132
		 "from node_types");
133
while (($class,$type,$delaycapacity,
134
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed)
135
	    = $result->fetchrow_array) {
136
137
138
139
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
140
    $map->{'SIMCAP'}   = $simcapacity;
141
    $map->{'ISVIRT'}   = $isvirt;
142
143
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
144
    $map->{'TRIVSPEED'}= $trivspeed;
145
146
147
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
148
149
150
151
152
153
154
155
156
157
158

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
159
160
161
162
163
164
165
166
167
168
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
169
170
}

171
172
173
174
175
176
177
178
179
180
181
182
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
183
184
185
186
187
188
189
190
191
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
192
    push @{$auxtypes{$node_id}}, "$type:$count";
193
}
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
214
215
}

216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
255
$result = DBQueryFatal("select osid from os_info where " .
256
    "nextosid is not null");
257
while (my ($osid) = $result->fetchrow()) {
258
259
260
    #
    # Check to see if they were allowed to use the real OSID
    #
261
262
263
    my $realosid = TBResolveNextOSID($osid);
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
264
265
266
267
268
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

269
# Print switches
270
if (defined($switchtouse)) {
271
    print "node $switchtouse switch:1 *lan:*\n";
272
273
274
275
276
277
278
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
279
	print "node $switch switch:1 *lan:*\n";
280
281
	$switches{$switch} = 1;
    }
282
}
283

284
# Find available nodes.
285
#
286
287
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
288
#
289

290
# the ordinary free condition for a local node.
291
292
293
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "')) ";
294
295
296
297
298

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
299
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
300
}
Chad Barb's avatar
Chad Barb committed
301

302
303
304
305
306
307
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

308
$result =
309
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
310
311
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
312
313
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
314
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
315
		 "left join node_types as t on t.type=a.type ".
316
		 "where $free_condition and ".
317
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
318

319
320
321
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
322
323
324
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
325
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
326
    = $result->fetchrow_array) {
327
328
329
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
330
331
332
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
333
    $node_def_boot_osid{$node} = $def_boot_osid;
334
335
336
337
338
339

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
340
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
341
342

foreach $node (keys(%nodes)) {
343
344
345
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
346
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
347
348
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
349
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
350
    
351
    my @types = ("$type:1");
352
353
    my @features;
    my @flags;
354
    my $needvirtgoo = 0;
355

356
357
358
359
360
361
362
363
364
365
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

366
    # Might be equal, which assign would sum as two, not one!
367
368
    if ($type ne $class) {
	push(@types, "$class:1");
369
370
    }

371
    if ($delay_capacity > 0) {
372
	push @types, "delay:$delay_capacity";
373
    }
374

375
376
377
    #
    # Add any auxiliary types
    #
378
379
380
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
381

382
383
384
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
385
386
	}
	else {
387
	    $realtype = $auxtype;
388
	}
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

405
    my $cpu_ram_features_present = 0;
406
407
408
409
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
410
	push @types, "*lan:*";
411
412
413
414
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
415
	# Add CPU and RAM information
416
	$cpu_ram_features_present++;
417
418
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
419
420
421
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
422
423
    }

424
425
426
427
428
429
430
431
432
433
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
434
	# Add CPU and RAM information
435
	$cpu_ram_features_present++;
436
437
438
439
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
440
441
442
443
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
444
445
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
446
    }
447

448
    # Add features
449
    push(@features, @{$typemap{$type}->{'FEATURES'}});
450
451
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
452
453
    }

454
455
456
457
458
459
460
461
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }

462
463
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
464
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
465
466
467
	push(@features,"already_reserved:0");
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
468
469
470
471
472
473
474
475
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

476
477
478
479
480
481
482
483
484
485
486
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
487
	}
488
489
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
490
    }
491
492
493
494
495

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


496
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
497
498
}

499
500
501
502
503
504
505
506
507
508
509
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
510
511
512
513
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
514
515
if ($widearea) {
    $result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
516
517
518
519
520
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site ".
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
521
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
522
523
524
		     "     wn.node_id=n.node_id ".
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
525
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
526
527
    while (($physnode,$ptype,$status,$mpid,$meid,$site)
	   = $result->fetchrow_array) {
528
	my $class = $typemap{$ptype}->{'CLASS'};
529
530
531
532
	my @types;
	my @features;
	my @flags;

533
534
535
536
537
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
538
539
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
540
541
542
	    push @features, "down:1";
	}

543
544
545
546
547
548
549
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

550
551
552
	#
	# Add any auxiliary types.
	#
553
554
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
555

Leigh B. Stoller's avatar
Leigh B. Stoller committed
556
557
558
559
560
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
561
	    }
562
	    push(@types, $auxinfo);
563
564
565
566
567
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

568
569
570
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

571
	# Add features
572
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
573
574
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
575
576
577
578
579
580
581
582
583
584
	}

	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

585
# Read interfaces
586
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
587
		     " from interfaces");
588
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
589
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
   
Chad Barb committed
590
    if ((defined $type) && ($type ne "")) {
591
592
593
594
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
610
611
}

612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
$result = DBQueryFatal("SELECT node_id, iface, card, port FROM interfaces");
while (($node,$iface,$card,$port) = $result->fetchrow_array) {
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

627
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
628
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
629
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
630
       $result->fetchrow_array) {
631
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
632
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
633
634
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
635
636
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
637
638
639
640
641
642
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
643
644
	    $bw = $iface1bw;
	} else {
645
646
647
648
649
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
650
	}
651
	if (defined($switches{$node2})) {
652
653
	    $used_switches{$node2} = 1;
	}
654
655
656
657
658
659
660
661
662
663
664
665
666
667
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
668
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
669
670
	}
    } 
671
}
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
692
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

722
723
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
724
725
    print "link link-$interconnect $src $dst $interconnects{$interconnect} " .
	"0 0 1 ethernet\n";
726
}
727

728
#
729
# Fake switch. Hardwired for now. 
730
#
731
732
733
my @wireless_protos = ("80211", "80211a", "80211b", "80211g");
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
734

735
736
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
737

738
739
    next
    if (!defined($nodes{$node}));
740
	
741
742
743
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
744

745
746
747
748
749
750
751
752
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
753

754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
770
771
	}
    }
772
773
774
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
775
776
777
778
}

exit(0);

779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
	return $interfacemap{"$node:$card:$port"};
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

795
796
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
797
sub get_ifacebw {
798
    ($node,$card,$port,$protocol) = @_;
799
    if (defined($interfacetypes{"$node:$card:$port"})) {
800
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
801
802
803
    }
    else {
	return $default_switchport_speed;
804
805
    }
}
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}