xpimage-notes.txt 32 KB
Newer Older
1
# Directions for setting up an XP image from scratch.
2 3
# These are raw notes and commands to paste into a shell.
# Mostly Bash shell commands for Windows, some tcsh commands for Boss or Ops.
4 5
# Some (most?) of it could be scriptified with some work. 

6 7 8 9 10 11 12
# Notice that this file has spaces instead of tabs at the beginning of lines.
# A tab in either Bash or tcsh causes it to display all of the possible command completions!

# By convention, "informational" commands are indented a couple of spaces more.
## Debugging and problem-solving stuff is double-commented.

alias v 'ls -lsF'               # "Verbose" listing
13 14
setenv en emulab.net
alias rootpc 'sudo ssh pc\!^.$en \!:2*'
15 16
alias rootrd 'rd  -K -g 1280x1024 -u root pc\!^.$en &'

17 18 19 20 21 22 23 24

    . Start with a clean XP image, without all of the freight from Russ C's work.

      - Swap in experiment Windows-1-base, log in as Administrator.

      - Set the Windows "w32time" NTP client to connect to the Emulab NTP host.

         . Runs as a service, periodically contacts the time server.
25 26 27 28 29 30 31 32 33 34
           ntp1 is a DNS alias for Ops.
           Need to restart w32time before it sees the setsntp configuration. (?)
             net time /querysntp
             net stop w32time
             net time /setsntp:ntp1
             net time /querysntp
             net start w32time
             # May take a couple of minutes to take effect.
             date
             
35 36 37 38
        . Need an NTP client, or at least the semblence of one.
            cat /etc/ntp.drift
          echo 0.000 > /etc/ntp.drift

39 40 41 42 43 44 45 46 47 48 49 50 51 52
      - Disable the Messenger Service to keep annoying pop-ups away.
            regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/Messenger
          regtool -v set /HKLM/SYSTEM/CurrentControlSet/Services/Messenger/Start 4

      - Disable the SSDP Discovery Service and Universal Plug and Play Device Host.
        This closes port 5000 to attacks.  Also the Remote Registry service.
            regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/SSDPSRV
            regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/upnphost
            regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/RemoteRegistry
          # (4 is Disabled, 3 is Manual, 2 is Automatic, 1 is only used for System services.)
          regtool -v set /HKLM/SYSTEM/CurrentControlSet/Services/SSDPSRV/Start 4
          regtool -v set /HKLM/SYSTEM/CurrentControlSet/Services/upnphost/Start 4
          regtool -v set /HKLM/SYSTEM/CurrentControlSet/Services/RemoteRegistry/Start 4

53 54 55 56 57 58
      - Set the workgroup name to EMULAB in Control Panel/System/Computer Name/Change...
        No need to reboot yet.

      - Make a "root" account in Control Panel/Administrative Tools/Computer Management/
        System Tools/Local Users and Groups/Users, put it in the Administrators and Users groups.

59 60
        . Also go into Services and Applications/Services and stop SSDP Discovery Service
          and Remote Registry.  Go into their Properties/Startup type and disable them as well.
61

62 63
        . While you're there, Right-click Start/"Explore All Users" and copy the Computer Management
          shortcut to the All Users/Desktop folder.
64 65 66 67 68 69 70 71 72

      - Start IE, make "blank" the home page. Click Tools/Internet Options/Home page/Use Blank.

      - Show My Computer.  (Desktop Properties/Desktop/Customize Desktop...)
        Turn off "Run Desktop Cleanup Wizard every 60 days".

      - Create C:/Temp, C:/Software/CygWin
      - Install CygWin
        . Download setup from www.cygwin.com/setup.exe to C:/Software/CygWin (in /share/windows, too.)
73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
        . Run it.  Install dir is C:\cygwin, package dir is C:\Software\CygWin .
        . Mirror is http://mirrors.xmission.com .
        . Click [View] to "Not Installed" (alphabetical.)  
          Click on the Skip in the "New" column to add a binary version of:
            agetty, bison, cvs, cygrunsrv, ed, file, flex, gcc, gdb, make, minires-devel, nano,
            openssh, openssl-devel, patch, perl, perl-libwin32, python, rpm, rpm-build,
            rsync, shutdown, tcsh, vim, wget, zip .
        . Don't "Create an icon on the Desktop", do "Add icon to Start Menu".

        . Add ;C:\cygwin\bin to the end of the System PATH in 
          Control Panel/System/Advanced/Environment Variables.

        . Start up a Cygwin shell and fix the shell properties:
            Options QuickEdit Mode on, Layout/screen buffer height 3000, window height 55.
            Check "Modify shortcut that started this window".
          - Might as well fix the Start/Programs/Accessories/Command Prompt properties, too.
          - Copy the bash shortcut to the All Users/Desktop.  
          - Copy it to a tcsh icon as well, changing the path to c:\cygin\cygwin-tcsh.bat .
          - Copy the tcsh icon into All Users/Start Menu/Programs/Cygwin.
          - Create c:\cygin\cygwin-tcsh.bat as a copy of c:\cygin\cygwin.bat with
              bash --login -i
            changed to
              tcsh -l

        . Set up local homedirs under /home as a symlink.  ~root is already there.
            cd /tmp
            mv /home{,.orig}
            ln -s /cygdrive/c/Documents\ and\ Settings/ /home

        . Symlink the Windows hosts file into the Cygwin /etc.
            ln -s /cygdrive/c/WINDOWS/system32/drivers/etc/hosts /etc/hosts

        . Create a proper group file.  Make wheel an alias for Administrators.
106 107
            mkgroup -l | \
              awk '/^Administrators:/{print "wheel" substr($0, index($0,":"))} \
108
                   {print}' > /etc/group.new
109 110 111 112 113 114 115 116 117 118
            diff /etc/group{,.new}
            cp -p /etc/group{,.prev}
            mv /etc/group{.new,}

        . Update the passwd file after creating new accounts.  Make root uid 0 with /home/root.
            mkpasswd -l | awk -F: 'BEGIN{ OFS=":" } \
               { if ($1=="root") $3="0"; else sub("/home/", "/users/"); print }' > /etc/passwd.new
            diff /etc/passwd{,.new}
            cp -p /etc/passwd{,.prev}
            cp -p /etc/passwd{.new,}
119
            chown root /etc/{passwd,group}*
120 121

        . Set up sshd.  
122 123 124 125 126 127
          - Edit /bin/ssh-host-config to add a -i argument to the "cygrunsrv -I sshd" lines.
              ed /bin/ssh-host-config
              /cygrunsrv -I sshd/s//& -i/p
              /cygrunsrv -I sshd/s//& -i/p
              w
              q
128
          - Then start a cygwin shell and say:
129 130 131 132 133 134 135 136 137
              ssh-host-config -y -c "ntsec tty"
            or run ssh-host-config and answer the following interactive questions:
              Select privilege separation = yes, sshd user = yes, install as service = yes, 
                CYGWIN=ntsec tty
          - Check for -i flag: look for Interactive = 0x00000001 (1)
              regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/sshd/Parameters

          - Edit /etc/sshd_config
            . Add this line: AuthorizedKeysFile /sshkeys/%u/authorized_keys
Russ Fish's avatar
Tweaks.  
Russ Fish committed
138 139 140
                ed /etc/sshd_config
                /AuthorizedKeysFile
                a
141 142 143 144
AuthorizedKeysFile /sshkeys/%u/authorized_keys
.
w
q
145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
            . LogLevel defaults to INFO, can be set to VERBOSE, DEBUG1, etc.
              Debug events are logged under Event View / Application / sshd,
              One line per event (ugh.)  Refresh to see new events with F5.
                ls -l /etc/sshd_config
                # Check.
                grep LogLevel /etc/sshd_config
	        # Make it writable to edit, then change it back.
                chmod g+w /etc/sshd_config
                nano /etc/sshd_config
                chmod g-w /etc/sshd_config
                # Get a running sshd to read the config file with SIGHUP.
                kill -HUP `cat /var/run/sshd.pid`

          - Start sshd.
              cygrunsrv -S sshd
160 161

          - Set up for root ssh access from Boss.
162 163 164
              chown root.wheel /home/root
              chmod 755 /home/root
              passwd root
165 166
daFluxGroup
daFluxGroup
167 168 169 170 171 172 173 174
              mkdir ~root/.ssh
              chown root.wheel ~root/.ssh
              # [On boss.]
              set pc=73
              set ssh_args='-o "StrictHostKeyChecking no" -o "UserKnownHostsFile /dev/null"'
	      # This password isn't used for anything else, and doesn't need to be
	      # very secure because all users are in the Administrators group on the node.
              eval sudo ssh "$ssh_args" root@pc$pc id
175
daFluxGroup
176
              eval sudo scp "$ssh_args" ~root/.ssh/{id_dsa,identity}.pub root@pc$pc":".ssh
177
daFluxGroup
178
              eval sudo ssh "$ssh_args" root@pc$pc
179
daFluxGroup
180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206
              # [On the target.]
              id
              cd ~root/.ssh
              cat {id_dsa,identity}.pub > authorized_keys
              chmod 644 *
              ls -ld /home /home/root /home/root/.ssh /home/root/.ssh/auth*
              mkdir -p /sshkeys/root
              v -d /sshkeys
              chmod 700 /sshkeys/root
              cp -p /home/root/.ssh/authorized_keys /sshkeys/root
              ls -lR /sshkeys/root
              exit

            # [Check back on Boss.]
            eval sudo ssh "$ssh_args" pc$pc id
            # The following will likely complain due to nonstandard host keys.
            rootpc $pc id

          - Install the standard host keys, dated Jun 21  2001.
            ls -l /etc/ssh*
            # [On boss.]
            set pc=136
            set ssh_args='-o "StrictHostKeyChecking no" -o "UserKnownHostsFile /dev/null"'
            eval sudo scp -rp "$ssh_args" /proj/testbed/fish/elab-host-keys root@pc$pc":"

            eval sudo ssh "$ssh_args" root@pc$pc
            # [On the target.]
207 208 209 210 211 212 213 214 215 216 217 218 219 220
              ls -l ~/elab-host-keys
              ls -l /etc/ssh*key*
              ls -l /etc/orig-ssh-keys

              mkdir /etc/orig-ssh-keys
              chown root /etc/ssh*key*
              cp -p /etc/ssh*key* /etc/orig-ssh-keys
              chown SYSTEM /etc/orig-ssh-keys/*
              ls -l /etc/orig-ssh-keys

              cp -p ~/elab-host-keys/* /etc
              chown SYSTEM /etc/ssh*key*
              ls -l /etc/ssh*key*

221 222 223
            # The following should no longer complain due to nonstandard host keys.
	    # [On Boss.] 
            rootpc $pc id
224 225

      - Install tools: WinZip and Emacs.
226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245
            # [On boss:]
            sudo scp -rp /share/windows/emacs-21.3-fullbin-i386.tar.gz root@pc$pc":"/tmp
            sudo scp -rp /share/windows/winzip90.exe root@pc$pc":"/tmp

            # Log in as root via RDP.
	    rootrd $pc
	    # [On the node, as root.]
            # Graphical installer.  Start with WinZip Classic, custon setup, no desktop icon.
            /tmp/winzip90.exe

            cd C:
            # Don't worry about a plethora of "Cannot change ownership" warnings.
            tar xfz /tmp/emacs-21.3-fullbin-i386.tar.gz
            # Graphical, set up the registry, start menu, etc.
            C:/emacs-21.3/bin/addpm.exe
            # Then copy the Emacs shortcut to the All Users/Desktop folder.

            # Make "emacs" be the NTEmacs runemacs starter, with "emacs-exe" for a compiler.
            ln -s /cygdrive/c/emacs-21.3/bin/runemacs.exe /usr/local/bin/emacs
            ln -s /cygdrive/c/emacs-21.3/bin/emacs.exe /usr/local/bin/emacs-exe
246 247

      - Get other stuff that "make client" depends on.
248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400
                ## Collect the include files for mysql and the Boost Graph Library.
                cd /usr/local/include
                tar cfz /share/windows/mysql-include.tgz mysql
                tar cfz /share/windows/boost-include.tgz boost
            # [On Boss.]
            sudo scp -rp /share/windows/{mysql,boost}-include.tgz root@pc$pc":"/tmp
            sudo scp -rp /share/windows/{WSName,addusers,usrtogrp,setx}.exe root@pc$pc":"/tmp
            # [On the target.]
            mkdir /usr/local/include
            cd /usr/local/include
            tar xfz /tmp/mysql-include.tgz
            tar xfz /tmp/boost-include.tgz

            # Build Elvin libs with GCC for testbed client programs.  
	    # [On Boss.]
            sudo scp -p /usr/testbed/www/distributions/*elvin*-4.0.3.tar.gz root@pc$pc":"/tmp
	    # [On the node.]
            # Need a path without embedded spaces for the make actions to work.
            mkdir C:/elvin
            cd C:/elvin
            # Don't worry about a plethora of "Cannot change ownership" warnings.
            tar xfz /tmp/libelvin-4.0.3.tar.gz
            tar xfz /tmp/elvind-4.0.3.tar.gz

            cd C:/elvin/libelvin-4.0.3
              # configure: error: Elvin requires that doubles be IEEE 754 compliant
              # On XP w/ no SP's, edit configure, line 3547, add exit(0); to patch around it.
            ./configure >& configure.trace 
              tail configure.trace

            # Comment out #elif defined(HAVE_WINBASE_H)
                              FreeLibrary(cat);
              in c:/elvin/libelvin-4.0.3/src/lib/i18n.c
            make >& make.log1
              tail make.log1
            make install >& install.log1
              tail install.log1
              make clean

# SKIP[
            # Build Elvin for Windows on Coke, and tar it up for later installation.
            scp -p bos:"/usr/testbed/www/distributions/*elvin*-4.0.3.tar.gz" /tmp
            mkdir C:/elvin
            cd C:/elvin
            tar xfz /tmp/libelvin-4.0.3.tar.gz
            tar xfz /tmp/elvind-4.0.3.tar.gz
            # Rename lib dir for makefiles in elvind.
            mv libelvin-4.0.3 elvin4

            cd C:/elvin/elvin4
            nmake /k /f Makefile.win >& lib-make.winlog1
            mkdir -p C:/Program\ Files/elvin4/{bin,lib,doc}
            cp -p win32/bin/*.exe C:/Program\ Files/elvin4/bin
            cp -p win32/lib/{,*/}*.{dll,lib} C:/Program\ Files/elvin4/lib
            mkdir C:/Program\ Files/elvin4/include
            cp -p src/include/elvin/*.h C:/Program\ Files/elvin4/include

            cd C:/elvin/elvind-4.0.3        
            nmake /k /f Makefile.win >& program-make.winlog1
            cp -p *.exe *.pem C:/Program\ Files/elvin4/bin
            cp -p [A-Z][A-Z]* C:/Program\ Files/elvin4/doc
              scp -p ../*/*.winlog* ops:/proj/testbed/fish/elvin
            scp -p ops:/proj/testbed/fish/elvin-config /cygdrive/c/Program\ Files/elvin4/bin

            # Install dll's in the system so the server can be run.
            v C:/Program\ Files/elvin4/lib
            chmod -R g-w C:/Program\ Files/elvin4
            chmod a+x C:/Program\ Files/elvin4/lib/*
            cp -p C:/Program\ Files/elvin4/lib/* $nts

            elvin="C:/Program Files/elvin4/bin/elvinsvc.exe"
              v "$elvin"
            "$elvin" --help
            # Application Error - The application failed to initialize properly (0xc0000022).

            tar cfz /tmp/elvin4-windows.tar.gz -C /cygdrive/c Program\ Files/elvin4
            scp -p /tmp/elvin4-windows.tar.gz ops:/share/windows
# SKIP]

            # Install the Windows Elvin, built on Coke above.
            # [On Boss.]
            sudo scp -p /share/windows/elvin4-windows.tar.gz root@pc$pc":"/tmp
            sudo scp -p /share/windows/elvind.conf.windows root@pc$pc":"/tmp/elvind.conf

            # [On the experiment node as root (Bash shell):]
            rootpc $pc
              cd C:
                ls -ld Program\ Files/elvin*
              tar xvfz /tmp/elvin4-windows.tar.gz
              chown -R root Program\ Files/elvin4
              cp -p C:/Program\ Files/elvin4/lib/* C:/WINDOWS/system32
              cp -p C:/Program\ Files/elvin4/lib/* /usr/local/lib
                diff /usr/local/etc/elvind_ssl.pem C:/Program\ Files/elvin4/bin/elvind_ssl.pem
              cp -p C:/Program\ Files/elvin4/bin/elvind_ssl.pem /usr/local/etc/elvind_ssl.pem

              elvind="C:/Program Files/elvin4"
              elvin="$elvind/bin/elvinsvc.exe"
                ls -l "$elvind/bin"
              chmod -R g-w "C:/Program Files/elvin4"
                "$elvin" --help &
              # Install as a service.
              "$elvin" -r
              # Install a config file and set the path for the server.
                diff /usr/local/etc/elvind.conf /tmp/elvind.conf
              cp /tmp/elvind.conf /usr/local/etc/elvind.conf
                ls -l /usr/local/etc/elvind.conf
              "$elvin" -c `cygpath -w /usr/local/etc/elvind.conf`
                  ## Testing: start elvinsvc from the Services Manager now.
              # Make elvinsvc automatic in services manager, or use these commands:
            	regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/elvinsvc.exe
              # (4 is Disabled, 3 is Manual, 2 is Automatic, 1 is only used for System services.)
              regtool -v set /HKLM/SYSTEM/CurrentControlSet/Services/elvinsvc.exe/Start 2

# SKIP[
              ## Use any Windows experiment with a Program object in it for testing.
              pid=testbed eid=Windows-1
                pid=testbed eid=Windows-1b
                pid=testbed eid=Windows-1c
              $BINDIR/evproxy -s event-server -e $pid/$eid
	      
	      ## program-agent debugging.
                ps -Welf | grep program-agent
                $rc/rc.progagent shutdown
              $rc/rc.progagent boot
                ## Debugging.
                tail $LOGDIR/progagent.debug
                program-agent -d -e $pid/$eid -s localhost -c /var/emulab/boot/progagents
                # [On ops.]
                tevc -e testbed/Windows-1c now prog0 start \
                    COMMAND="bash -c 'date; hostname' > /tmp/host.txt"
                # [On the node.]
                tail /tmp/host.txt
                cat /local/logs/prog0.status
	      
                ## C:\cygwin\bin\tcsh.exe (2504): *** couldn't create window, Win32 error 5
                ## See http://comments.gmane.org/gmane.os.cygwin.patches/2559
                ## This is at cygwin-1.5.17-1-winsup/cygwin/window.cc:wininfo::winthread():96
                ## Try starting rc.progagent as a separate service with -i for a desktop.
	        
                  ## Started up and stopped immediately.  Needs something else in rc.bootsetup.
                  --dep elvinsvc.exe \
	        
                  ## Depend on EmulabStartup (rc.bootsetup), which depends on the elvin service,
                  ## and also starts evproxy.  But it stops rather than staying running...
                  --dep EmulabStartup \
	        
                ## Make it manual, and explicitly start it after rc.bootsetup in EmulabStartup.
                ## Works, but stays in "starting" state, err in bootsetup.log:
                ##  cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error 1053:
                ##  The service did not respond to the start or control request in a timely fashion.
# SKIP]

              # For setuid() to work, Root must have these rights: Create a token object; Replace a
401 402 403 404 405 406 407 408
              # process level token; and Increase Quota rights.
              # http://cygwin.com/cygwin-ug-net/ntsec.html#ntsec-switch,
              # http://msdn.microsoft.com/library/en-us/secauthz/security/authorization_constants.asp
              editrights -u root -l
              editrights -u root -a SeCreateTokenPrivilege -l
              editrights -u root -a SeAssignPrimaryTokenPrivilege -l
              editrights -u root -a SeIncreaseQuotaPrivilege -l

409
              # program-agent service start-up.
410 411
                cygrunsrv -R ProgAgent
              cygrunsrv -I ProgAgent -d "Emulab Program Agent" -i -p /cygdrive/c/cygwin/bin/bash \
412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
                  --type manual \
                  -a "--norc --noprofile -c '/usr/local/etc/emulab/rc/rc.progagent >& /var/log/program-agent.log'"
                regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/ProgAgent/Parameters
                cygrunsrv -Q ProgAgent
                cygrunsrv -S ProgAgent
                cygrunsrv -E ProgAgent

                  tail /var/log/{program-agent,ProgAgent}.log
                touch /var/log/{program-agent,ProgAgent}.log
                chmod 777 /var/log/{program-agent,ProgAgent}.log

# SKIP[
                # Little problem: "Must be root to run this script!"
                # Add this: 
                  # This runs as a separate Local System service on XP.  Change to root.
                  if (WINDOWS()) { $EUID = $UID = 0; }

                # Testing on ops.
                tevc -e testbed/bsd-1 now prog0 start
                tevc -e testbed/bsd-1 now prog0 start COMMAND='hostname >>& /users/fish/test.out'

                tevc -e testbed/Windows-1 now prog0 start COMMAND='hostname>>&/users/fish/test.out'
                  v /users/fish/test.out
                  tail /users/fish/test.out
                tevc -e testbed/Windows-1 now prog0 run COMMAND='touch /tmp/foo'
                tevc -e testbed/Windows-1 now prog0 run COMMAND='id'
                tevc -e testbed/Windows-1 now prog0 run COMMAND='ls -l /users/fish'
                tevc -e testbed/Windows-1 now prog0 run COMMAND='ls -l /proj/testbed/fish'

                # [On the node.]
                cat /local/logs/prog0.status
                cat /local/logs/prog0.err
                cat /local/logs/prog0.out
# SKIP]
446 447 448

      - Get the testbed client code via CVS, build, and install it.
            rootpc $pc
449 450 451 452 453 454 455 456 457 458 459 460 461 462
            # [As root, on the node.]
	    set ws_login=fish@kzin.flux.utah.edu
            # Start an agent and go to your workstation to get your ssh keys for the cvs server.
            eval `ssh-agent -s`
              ssh-add -l
            ssh -A $ws_login
              ssh-add -l
            kdsa
            exit
              ssh -v $ws_login id

              mkdir ~/flux
            cd ~/flux
            export CVSROOT=$ws_login:/usr/flux/CVS CVS_RSH=ssh
463 464 465

              # First time only
              mkdir CVS; touch CVS/Entries; echo . > CVS/Repository
466
            # Any time the testbed tree needs to be re-created.
467 468
            cvs -Q co testbed

469 470 471 472
              # Updates After that.
              cat CVS/Entries
                cvs -n -q update testbed
              cvs -Q update -d testbed
473 474 475 476 477

            # Some dotfiles for Root.
            cp -p testbed/tmcd/cygwinxp/cygwin.root.bashrc ~root/.bashrc
            cp -p testbed/tmcd/cygwinxp/cygwin.root.bash_profile ~root/.bash_profile
            cp -p testbed/tmcd/cygwinxp/cygwin.root.emacs ~root/.emacs
478
            # No HOME envar is set for root's desktop, so Emacs defaults it to C:/ .
479 480
            cp -p ~root/.emacs C:/.emacs

481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527
            # Site-lisp files for Emacs.
            cp -rp testbed/tmcd/cygwinxp/site-lisp/* c:/emacs-21.3/site-lisp
            ls -l c:/emacs-21.3/site-lisp

            # Need a resolv.conf before tmcc will work.
              cat /etc/resolv.conf
            cp -p ~/flux/testbed/tmcd/cygwinxp/resolv.conf /etc/resolv.conf
             
            mkdir /usr/local/man/man8
              
            # Get the binary programs into the source tree for install.
              ls -l ~/flux/testbed/tmcd/cygwinxp/*.exe
            # [On boss:]
            sudo scp -rp /share/windows/{WSName,addusers,usrtogrp,setx}.exe root@pc$pc":"/tmp
            # [Back on the client:]
            cp -p /tmp/{WSName,addusers,usrtogrp,setx}.exe ~/flux/testbed/tmcd/cygwinxp

	    # Finally ready to do the Emulab makes!
            mkdir ~/flux/obj-real
            cd ~/flux/obj-real
              v configure.trace*
              mv configure.trace{,.1}
            ../testbed/configure --enable-windows --enable-windowsclient >& configure.trace
              # Should end with "creating config.h".
              tail configure.trace

            # The first make fails with "Cannot change ownership" warnings unpacking tg2.0 .
            make client-install >& make.log1
              tail make.log1
            # No worries.  Patch it explicitly, since the patch action gets skipped.
            (cd ~/flux/testbed/event/trafgen; patch -p0 < tg.patch)

            # If this is an update, evproxy is run by rc.bootsetup and nothing stops it.
            # The install of evproxy in the make will fail unless we stop it first.
            ps -Welf | grep evproxy
              kill `ps -Welf | grep evproxy | awk '{print $2}'`
            make client-install >& make.log2
              tail make.log2

                # Only needed if there are problems...
                make client-install >& make.log3
                make -k client-install >& make.log4
                make -k client-install >& make.log5
                make client-install >& make.log6
                make client-install >& make.log7
                make client-install >& make.log8
                make client-install >& make.log9
528 529 530

      . Patch the /etc/profile file to use /home dirs if the /users mounts are down.
        Remember that /etc/profile may get stepped on when you upgrade CygWin!
531
            (cd ~/flux; cvs update testbed/tmcd/cygwinxp/profile)
532
          diff /etc/profile ~/flux/testbed/tmcd/cygwinxp
533 534 535 536 537 538 539 540 541 542 543 544 545 546 547
            # If the diffs are right, just copy the Emulab one.
            cp ~/flux/testbed/tmcd/cygwinxp/profile /etc
          # Otherwise, edit the file.
          ed /etc/profile
  /^# If the home directory doesn't exist, create it./,/^if \[ ! -d "\${HOME}" \]; then/p
/^# If the home directory doesn't exist, create it./,/^if \[ ! -d "\${HOME}" \]; then/c
### Use a local dir under sshd if the mount failed.
if [ ! -d "$HOME" ]; then
        HOME=/home/$USER
fi
# If the home directory doesn't exist, create it.
if [ ]; then
###if [ ! -d "${HOME}" ]; then
.
  .-10,.+5p
548 549

      . Set up the tbshutdown script to run as a service, to get a shutdown signal.
550 551 552 553
            editrights -u root -l
          editrights -u root -a SeServiceLogonRight -l
          # Don't forget to set the root password to this.
          rootpwd='daFluxGroup'
554
          # EmulabShutdown is started manually later on from rc.cygwinxp .
555
          echo "$rootpwd"
556 557 558 559 560
            cygrunsrv -R EmulabShutdown
          cygrunsrv -I EmulabShutdown -u root -w "$rootpwd" -p /cygdrive/c/cygwin/bin/bash \
              --shutdown --type manual \
              -a "--norc --noprofile -c '/usr/local/etc/emulab/tbshutdown'"

561 562 563 564 565
          # If you see the following, try running rc.accounts or rc.bootsetup below to 
	  # clear it up.  Haven't figured this out yet...
          ##cygrunsrv: Error installing a service: CreateService:  Win32 error 1057:
          ##The account name is invalid or does not exist, or the password is invalid 
          ##for the account name specified.
566

567 568 569
          touch /var/log/EmulabShutdown.log
          chmod 666 /var/log/EmulabShutdown.log
          regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/EmulabShutdown/Parameters
570
          cygrunsrv -Q EmulabShutdown
571 572
	    # Manual start-up.
            cygrunsrv -S EmulabShutdown
573 574

      . See if rc.bootsetup works.
575 576 577
          ##Running os dependent initialization script rc.cygwin
          ##chmod: cannot access `/var/log/EmulabStartup.log': No such file or directory
          ##chmod: cannot access `/etc/emulab/iscygwin': No such file or directory
578 579
          touch /var/log/EmulabStartup.log
          chmod 666 /var/log/EmulabStartup.log
580 581 582 583 584 585 586
            tmcc nodeid
              ## Missing /etc/resolv.conf .
              tmcc -d nodeid
                    nodeid 
                    /usr/local/etc/emulab/tmcc.bin  -d nodeid 
                    Connection to TMCD refused. Waiting ...
            ## Should reboot, the first time, when it changes the node ID.
587
            $rc/rc.cygwin
588 589
          v -d /sshkeys
          mkdir /sshkeys
590
          chmod 777 /sshkeys
591
            $rc/rc.accounts
592 593 594 595
          $rc/rc.bootsetup

      . Set up the boot script to run as a service.

596 597 598
          # Better: with dependency on Elvin, run rc.cygwin separately first, ProgAgent after.
              cygrunsrv -R EmulabStartup 
          rootpwd='daFluxGroup'
599 600
          cygrunsrv -I EmulabStartup -u root -w $rootpwd -p /cygdrive/c/cygwin/bin/bash \
           --dep elvinsvc.exe \
601
           -a "--norc --noprofile -c '( /usr/local/etc/emulab/rc/rc.cygwin; /usr/local/etc/emulab/rc/rc.bootsetup; cygrunsrv -S ProgAgent ) >& /var/log/bootsetup.log'"
602

603 604 605 606 607 608 609 610 611 612 613 614 615 616
              cygrunsrv -Q EmulabStartup 
            cygrunsrv -S EmulabStartup 
            cygrunsrv --help
          regtool -v list /HKLM/SYSTEM/CurrentControlSet/Services/EmulabStartup/Parameters
          sc query EmulabStartup

      . Make a $HOME envar for everybody, so Emacs works on startup from the desktop.
        - Set a user environment variable: HOME = /users/%USERNAME%
        - Stored in HKCU/Environment, which is HKU/*/Environment based on the user SIDs.
        - The user registry key (folder) is created at first login, doesn't exist before that.
          Run setx after that at login time to set the HOME environment variable value.
                # Check.
                regtool get /HKLM/SOFTWARE/Microsoft/Windows/CurrentVersion/Run/SetHOME
          # Use the Windows command prompt rather than a script.
617 618
          regtool -s set /HKLM/SOFTWARE/Microsoft/Windows/CurrentVersion/Run/SetHOME \
            'cmd /C "if not %USERNAME% == root if not %USERNAME% == Administrator setx HOME //fs/%USERNAME%"'
619 620 621
                # Undo.
                regtool unset /HKLM/SOFTWARE/Microsoft/Windows/CurrentVersion/Run/SetHOME
          # Check that setx.exe is in system32.
622 623 624 625 626
          v C:/WINDOWS/system32/setx.exe

================================================================
Making images

627
     . Uninstall the experimental net devices in Computer Management/Device Manager.
628
         # Check which one is the control net interface.
629 630 631
         ipconfig /all
       Select a non-control net interface, hit delete, enter.
       Takes about 15 seconds per interface.
632

633
     . Run prepare to clear out experiment-specific state.
634 635 636 637 638
        rootpc $pc
          # Ignore complaints about all of the C:/Documents and Settings directories
          # that were never created because the user didn't log in...
          prepare
          exit
639 640 641

    . Add an entry at the beginning of xpimage-log.txt, and create the image descriptor.

642 643 644 645 646 647 648 649 650 651
    . Capture the image with imagezip.  
      You can specify the PC from which to grab the image when you create an image-id.
      When updating existing images, I do it by hand in two stages, as below.
    
        # [On boss.]
        set pc=136 image=SP1
        set pc=73 image=SP0a
        set pc=2 image=SP0
        df -m /proj/testbed/images /usr/testbed/images
          # Verify SSH working.
652 653
          rootpc $pc id

654
        # Boot into the MFS.  The serial console will show you when it's open for business.
655
        wap node_admin on pc$pc &
656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691
              # Should no longer be necessary.
              rootpc $pc /sbin/reboot

        # Make WINXP-TMP on /proj, then move it to /usr/testbed/images with the right name.
        rootpc $pc
          cd /proj/testbed/images
          df -m /proj/testbed/images
          ls -l WINXP*
          imagezip -o -I 2 -I 3 -I 4 /dev/ad0 WINXP-TMP.ndz
          ls -l WINXP*
          exit

        # Reboots the source node back into Windows.
        wap node_admin off pc$pc

        # Move the image to /usr/testbed/images to avoid NFS reads, for faster swap-in.
          ls -l /{proj,usr}/testbed/images/WIN*
        ls -l /proj/testbed/images/WINXP-TMP.ndz /usr/testbed/images/WINXP-$image.ndz
        df -m /usr/testbed/images
        cp /{proj,usr}/testbed/images/WINXP-TMP.ndz
        # Check.
        ls -l /{proj,usr}/testbed/images/WINXP-TMP.ndz
        cksum /usr/testbed/images/WINXP-TMP.ndz & ssh ops cksum /proj/testbed/images/WINXP-TMP.ndz
          # May want to save a version or two along the way.
          v /usr/testbed/images/WINXP-$image*.ndz
          df -m /usr/testbed/images
          mv /usr/testbed/images/WINXP-$image{,-7-05}.ndz
        # Install with mv.  Frisbee might have the old inode still open.
        mv /usr/testbed/images/WINXP-{TMP,$image}.ndz
        ls -l /usr/testbed/images/WINXP-$image.ndz
        df -m /usr/testbed/images
        # Clear the temp from /proj.
        rm -f /proj/testbed/images/WINXP-TMP.ndz
        df -m /proj/testbed/images
          ls -l /{proj,usr}/testbed/images/WIN*
        
692
    . DEMOTING an image to /proj/testbed/images (edit the image descriptor.)
693 694 695 696 697 698 699 700 701 702
        ls -l /usr/testbed/images/WINXP-$image.ndz
        df -m /proj/testbed/images
        cp /usr/testbed/images/WINXP-$image.ndz /proj/testbed/images
        # Check.
        ls -l /{usr,proj}/testbed/images/WINXP-$image.ndz
        ssh ops cksum /proj/testbed/images/WINXP-$image.ndz & cksum /usr/testbed/images/WINXP-$image.ndz
        # Clear the old copy.
        df -m /usr/testbed/images
        rm -f /usr/testbed/images/WINXP-$image.ndz
        df -m /usr/testbed/images