ptopgen.in 23.2 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12 13
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
14 15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
16
	  "       -p include nodes the project has permission to use\n".
17
	  "       -e include given experiments resources\n" .
18 19
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
20
	  "       -r Include stuff for topologies with widearea nodes\n".
21
	  "       -s Include stuff for topologies with simulated nodes\n".
22
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23 24
	  "       -m Override multiplex_factor\n".
	  "       -n Add in modelnet core and edge node features\n");
25 26
    exit(-1);
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
my $optlist = "s:e:m:vp:rSan:";
28
my $mfactor;
29
my $virtstuff = 0;
30
my $widearea  = 0;
31
my $simstuff  = 0;
32
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
33 34
my $mnetcores = 0;
my $mnetedges = 0;
35

36 37 38 39
#
# Turn off line buffering on output
#
$| = 1;
40 41 42 43 44 45 46 47 48 49 50 51

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

52 53 54 55 56 57
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

58 59
######################################################################

60
my $TBROOT = "@prefix@";
61
use lib '@prefix@/lib';
62
require exitonwarn;
63
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
64

65 66
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

67 68 69
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
70 71
my %typemap       = ();
my %auxtypemap    = ();
72

73 74 75
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

76
my $pid;
77
my $exempt_eid;
78
my $switchtouse;
79

80 81 82 83 84 85 86 87 88 89 90 91 92 93
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
94 95 96
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
97 98 99
if (defined($options{"v"})) {
    $virtstuff = 1;
}
100 101 102
if (defined($options{"r"})) {
    $widearea = 1;
}
103 104 105
if (defined($options{"S"})) {
    $simstuff = 1;
}
106 107 108
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
109 110 111
if (defined($options{"a"})) {
    $allnodes = 1;
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
112 113 114 115 116 117 118 119 120
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
121
if (defined($options{"e"})) {
122 123 124
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
125 126
}

127
# Read class/type maps
128
my $result =
129
    DBQueryFatal("select class,type,delay_capacity,".
130
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
131
		 "   speed, RAM, trivlink_maxspeed ".
132
		 "from node_types");
133
while (($class,$type,$delaycapacity,
134
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed)
135
	    = $result->fetchrow_array) {
136 137 138 139
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
140
    $map->{'SIMCAP'}   = $simcapacity;
141
    $map->{'ISVIRT'}   = $isvirt;
142 143
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
144
    $map->{'TRIVSPEED'}= $trivspeed;
145 146 147
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
148 149 150 151 152 153 154 155 156 157 158

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
159 160 161 162 163 164 165 166 167 168
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
169 170
}

171 172 173 174 175 176 177 178 179 180 181 182
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
183 184 185 186 187 188 189 190 191
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
192
    push @{$auxtypes{$node_id}}, "$type:$count";
193
}
194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
214 215
}

216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
255
$result = DBQueryFatal("select osid from os_info where " .
256
    "nextosid is not null");
257
while (my ($osid) = $result->fetchrow()) {
258 259 260
    #
    # Check to see if they were allowed to use the real OSID
    #
261
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
262 263
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
264 265 266 267 268
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

269
# Print switches
270
if (defined($switchtouse)) {
271
    print "node $switchtouse switch:1 *lan:*\n";
272 273 274 275 276 277 278
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
279
	print "node $switch switch:1 *lan:*\n";
280 281
	$switches{$switch} = 1;
    }
282
}
283

284
# Find available nodes.
285
#
286 287
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
288
#
289

290
# the ordinary free condition for a local node.
291 292
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
293 294
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
295 296 297 298 299

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
300
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
301
}
Chad Barb's avatar
Chad Barb committed
302

303 304 305 306 307 308
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

309
$result =
310
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
311 312
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
313 314
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
315
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
316
		 "left join node_types as t on t.type=a.type ".
317
		 "where $free_condition and ".
318
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
319

320 321 322
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
323 324 325
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
326
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
327
    = $result->fetchrow_array) {
328 329 330
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
331 332 333
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
334
    $node_def_boot_osid{$node} = $def_boot_osid;
335 336 337 338 339 340

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
341
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
342 343

foreach $node (keys(%nodes)) {
344 345 346
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
347
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
348 349
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
350
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
351
    
352
    my @types = ("$type:1");
353 354
    my @features;
    my @flags;
355
    my $needvirtgoo = 0;
356

357 358 359 360 361 362 363 364 365 366
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

367
    # Might be equal, which assign would sum as two, not one!
368 369
    if ($type ne $class) {
	push(@types, "$class:1");
370 371
    }

372
    if ($delay_capacity > 0) {
373
	push @types, "delay:$delay_capacity";
374
    }
375

376 377 378
    #
    # Add any auxiliary types
    #
379 380 381
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
382

383 384 385
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
386 387
	}
	else {
388
	    $realtype = $auxtype;
389
	}
390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

406
    my $cpu_ram_features_present = 0;
407 408 409 410
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
411
	push @types, "*lan:*";
412 413 414 415
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
416
	# Add CPU and RAM information
417
	$cpu_ram_features_present++;
418 419
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
420 421 422
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
423 424
    }

425 426 427 428 429 430 431 432 433 434
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
435
	# Add CPU and RAM information
436
	$cpu_ram_features_present++;
437 438 439 440
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
441 442 443 444
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
445 446
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
447
    }
448

449
    # Add features
450
    push(@features, @{$typemap{$type}->{'FEATURES'}});
451 452
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
453 454
    }

455 456 457 458 459 460 461 462
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }

463 464
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
465
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
466 467 468
	push(@features,"already_reserved:0");
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
469 470 471 472 473 474 475 476
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

477 478 479 480 481 482 483 484 485 486 487
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
488
	}
489 490
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
491
    }
492 493 494 495 496

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


497
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
498 499
}

500 501 502 503 504 505 506 507 508 509 510
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
511 512 513 514
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
515 516
if ($widearea) {
    $result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
517 518 519 520 521
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site ".
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
522
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
523 524 525
		     "     wn.node_id=n.node_id ".
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
526
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
527 528
    while (($physnode,$ptype,$status,$mpid,$meid,$site)
	   = $result->fetchrow_array) {
529
	my $class = $typemap{$ptype}->{'CLASS'};
530 531 532 533
	my @types;
	my @features;
	my @flags;

534 535 536 537 538
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
539 540
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
541 542 543
	    push @features, "down:1";
	}

544 545 546 547 548 549 550
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

551 552 553
	#
	# Add any auxiliary types.
	#
554 555
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
556

Leigh B. Stoller's avatar
Leigh B. Stoller committed
557 558 559 560 561
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
562
	    }
563
	    push(@types, $auxinfo);
564 565 566 567 568
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

569 570 571
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

572
	# Add features
573
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
574 575
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
576 577
	}

578 579 580 581 582 583 584 585
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

586 587 588 589 590 591 592 593
	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

594
# Read interfaces
595
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
596
		     " from interfaces");
597
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
598
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
 
Chad Barb committed
599
    if ((defined $type) && ($type ne "")) {
600 601 602 603
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

604 605 606 607 608 609 610 611 612 613 614 615 616 617 618
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
619 620
}

621 622 623 624 625 626 627 628 629 630 631 632 633 634 635
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
$result = DBQueryFatal("SELECT node_id, iface, card, port FROM interfaces");
while (($node,$iface,$card,$port) = $result->fetchrow_array) {
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

636
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
637
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
638
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
639
       $result->fetchrow_array) {
640
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
641
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
642 643
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
644 645
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
646 647 648 649 650 651
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
652 653
	    $bw = $iface1bw;
	} else {
654 655 656 657 658
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
659
	}
660
	if (defined($switches{$node2})) {
661 662
	    $used_switches{$node2} = 1;
	}
663 664 665 666 667 668 669 670 671 672 673 674 675 676
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
677
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
678 679
	}
    } 
680
}
681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
701
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

731 732
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
733 734
    print "link link-$interconnect $src $dst $interconnects{$interconnect} " .
	"0 0 1 ethernet\n";
735
}
736

737
#
738
# Fake switch. Hardwired for now. 
739
#
740 741 742
my @wireless_protos = ("80211", "80211a", "80211b", "80211g");
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
743

744 745
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
746

747 748
    next
    if (!defined($nodes{$node}));
749
	
750 751 752
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
753

754 755 756 757 758 759 760 761
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
762

763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
779 780
	}
    }
781 782 783
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
784 785 786 787
}

exit(0);

788 789 790 791
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
792 793 794 795 796
	if ($interfacemap{"$node:$card:$port"} eq "") {
	    return "(null)";
	} else {
	    return $interfacemap{"$node:$card:$port"};
	}
797 798 799 800 801 802 803 804 805 806 807
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

808 809
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
810
sub get_ifacebw {
811
    ($node,$card,$port,$protocol) = @_;
812
    if (defined($interfacetypes{"$node:$card:$port"})) {
813
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
814 815 816
    }
    else {
	return $default_switchport_speed;
817 818
    }
}
819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}