ptopgen.in 42.3 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
Leigh B. Stoller's avatar
Leigh B. Stoller committed
5
# Copyright (c) 2000-2009 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
11
use Math::BigInt;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
12

13 14 15
use lib "@prefix@/lib";
use libdb qw(TBGetSiteVar);

16 17
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
18
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
19
	  "[-n c/e] [-x] [-g]\n".
20
	  "       -p include nodes the project has permission to use\n".
21
	  "       -e include given experiments resources\n" .
22 23
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
24
	  "       -r Include stuff for topologies with widearea nodes\n".
25
	  "       -s Include stuff for topologies with simulated nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
26
	  "       -h Include stuff for topologies with shared nodes\n".
27
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
28
	  "       -m Override multiplex_factor\n".
29
	  "       -u Prune unused interfaces of allocated nodes (-e)\n".
30
	  "       -c Delay capacity override\n".
31
	  "       -n Add in modelnet core and edge node features\n".
32 33 34
	  "       -x Output into the new xml ptop format.\n".
	  "       -g With -x, geni version\n");
        exit(-1);
35
}
36

Leigh B. Stoller's avatar
Leigh B. Stoller committed
37
my $optlist = "s:e:m:vp:rSan:c:uxgh";
38
my $mfactor;
39
my $virtstuff = 0;
40
my $widearea  = 0;
41
my $simstuff  = 0;
42
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
43 44
my $mnetcores = 0;
my $mnetedges = 0;
45
my $prune     = 0;
46 47
my $do_xml    = 0;
my $genimode  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
48
my $useshared = 0;
49

50 51
my $cmuuid = TBGetSiteVar('protogeni/cm_uuid');

52
my $delaycap_override;
53

54 55 56 57
#
# Turn off line buffering on output
#
$| = 1;
58 59 60 61 62 63 64 65 66 67 68 69

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

70 71 72 73 74 75
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

76 77
######################################################################

78
my $TBROOT = "@prefix@";
79
use lib '@prefix@/lib';
80
require exitonwarn;
81
use libdb;
Kevin Atkinson's avatar
Kevin Atkinson committed
82
use libtblog;
83
use NodeType;
84
use Lan;
Kevin Atkinson's avatar
Kevin Atkinson committed
85 86

tblog_stop_capture('stdout');
Leigh B. Stoller's avatar
Leigh B. Stoller committed
87

88 89
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

90 91 92
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
93 94
my %typemap       = ();
my %auxtypemap    = ();
Timothy Stack's avatar
 
Timothy Stack committed
95
my %areamap       = ();
96
my %globalcounts  = ();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
97 98
my %interfacestate= ();
my %rusagedata    = ();
99

100 101 102
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

103
my $pid;
104
my $exempt_eid;
105
my $switchtouse;
106

107 108 109 110 111 112 113 114 115 116 117 118 119 120
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
121 122 123
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
124 125 126
if (defined($options{"h"})) {
    $useshared = 1;
}
127 128 129
if (defined($options{"v"})) {
    $virtstuff = 1;
}
130 131 132
if (defined($options{"r"})) {
    $widearea = 1;
}
133 134 135
if (defined($options{"S"})) {
    $simstuff = 1;
}
136 137 138
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
139 140 141
if (defined($options{"a"})) {
    $allnodes = 1;
}
142 143 144
if (defined($options{"u"})) {
    $prune = 1;
}
145 146 147
if (defined($options{"c"})) {
    $delaycap_override = $options{"c"};
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
148 149 150 151 152 153 154 155 156
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
157
if (defined($options{"e"})) {
158 159 160
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
161
}
162
if (defined($options{"x"})) {
163 164
    $genimode = 1
	if (defined($options{"g"}));
165 166
    $do_xml = 1;
}
167 168
usage()
    if ($prune && !defined($exempt_eid));
169

170 171
print_header();

172 173 174 175 176 177 178 179 180 181 182 183 184
my %nodetointerface;

# Read interfaces
my $result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
		     " from interfaces");
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
    push @{ $nodetointerface{"$node"} }, $iface;
    $interfacemap{"$node:$card:$port"} = $iface;
    if ((defined $type) && ($type ne "")) {
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

185 186 187 188 189
my %nodetouuid;
my %nodetoavailable;

$result = DBQueryFatal("SELECT n.node_id, n.eventstate, n.role, n.uuid, " .
		       "b.node_id, nt.isremotenode, " .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
190
		       "dedicated_wa_types.attrvalue, b.sharing_mode " .
191 192 193 194 195 196 197 198 199 200 201
		       "from nodes as n " .
		       "left join reserved as b on n.node_id=b.node_id " .
		       "left join node_types as nt on nt.type=n.type " .
		       "left outer join " .
		       "  (select type, attrvalue " .
		       "   from node_type_attributes " .
		       "   where attrkey='dedicated_widearea' " .
		       "   group by type) as dedicated_wa_types " .
		       "  on nt.type=dedicated_wa_types.type " .
		       "where nt.isvirtnode = 0 or nt.isvirtnode is null;");
while (($node,$eventstate, $role, $uuid, $reserved, $isremotenode,
Leigh B. Stoller's avatar
Leigh B. Stoller committed
202
	$wa_attrvalue, $sharing_mode) = $result->fetchrow_array) {
203 204 205 206 207 208 209 210 211
    $nodetouuid{$node} = $uuid;
    my $islocal = $role eq 'testnode'
	&& ((! defined($isremotenode) || $isremotenode == 0)
	    || (defined($wa_attrvalue) && $wa_attrvalue == 1));
    my $isup = defined($eventstate)
	&& ($eventstate eq "TBDB_NODESTATE_ISUP"
	    || $eventstate eq "TBDB_NODESTATE_PXEWAIT"
	    || $eventstate eq "TBDB_NODESTATE_POWEROFF"
	    || $eventstate eq "TBDB_NODESTATE_ALWAYSUP");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
212 213 214
    my $isfree = !$islocal || (! defined($reserved) && $isup) ||
	(defined($sharing_mode) &&
	 $sharing_mode eq "shared_local" && $useshared && $isup);
215 216 217
    $nodetoavailable{$node} = $isfree;
}

218
# Read class/type maps
219
$result =
220 221 222
    DBQueryFatal("select class,type,isvirtnode from node_types");

while (my ($class,$type,$isvirt) = $result->fetchrow_array) {
223 224 225
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'ISVIRT'}   = $isvirt;
226 227 228 229 230 231 232 233 234
    my $typeinfo       = NodeType->Lookup($type);
    $map->{'DELAYCAP'} = $typeinfo->delay_capacity();
    $map->{'VIRTCAP'}  = $typeinfo->virtnode_capacity();
    $map->{'SIMCAP'}   = $typeinfo->simnode_capacity();
    $map->{'SPEED'}    = $typeinfo->frequency();
    $map->{'RAM'}      = $typeinfo->memory();
    $map->{'OSID'}     = $typeinfo->default_osid();
    $map->{'IMAGEABLE'}= $typeinfo->imageable();
    $map->{'TRIVSPEED'}= $typeinfo->trivlink_maxspeed();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
235
    $map->{'SHARED'}   = $typeinfo->shared();
236
    $map->{'TYPEINFO'} = $typeinfo;
237 238 239
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
240 241 242 243 244 245

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

Timothy Stack's avatar
 
Timothy Stack committed
246 247
# Read node_startloc
$result = DBQueryFatal("select node_id,building from node_startloc");
Timothy Stack's avatar
 
Timothy Stack committed
248
while (($node,$building) = $result->fetchrow_array) {
249 250 251 252
    # TODO: This screws up the meaning of the @features list. Now it
    # is not just a list of feature strings, but a list of strings
    # which might themselves be space-delimited lists of feature
    # strings. Fix this.
Timothy Stack's avatar
 
Timothy Stack committed
253
    $areamap{$node} .= " area-$building:0";
Timothy Stack's avatar
 
Timothy Stack committed
254 255
}

256 257 258 259 260
#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
261 262 263 264 265 266 267 268 269 270
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
271 272
}

273 274 275 276 277 278 279 280 281 282 283 284
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
285 286 287 288 289 290 291 292 293
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
294
    push @{$auxtypes{$node_id}}, "$type:$count";
295
}
296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
316 317
}

318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
357
$result = DBQueryFatal("select osid from os_info where " .
358
    "nextosid is not null");
359
while (my ($osid) = $result->fetchrow()) {
360 361 362
    #
    # Check to see if they were allowed to use the real OSID
    #
363
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
364 365
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
366 367 368 369 370
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

371
# Print switches
372
if (defined($switchtouse)) {
373
    print_switch($switchtouse);
374 375 376 377
    $switches{$switchtouse} = 1;
}
else {
    $result =
378
	DBQueryFatal("select node_id,uuid from nodes ".
379
		     "where role='testswitch' or role='widearea_switch'");
380

381
    while (($switch, $uuid) = $result->fetchrow_array) {
382
	print_switch($switch, $uuid);
383 384
	$switches{$switch} = 1;
    }
385
}
386

387 388 389 390 391 392
#
# Get the global counts.
#
$result =
    DBQueryFatal("select phys_nodeid,count(phys_nodeid) from reserved as r ".
		 "left join nodes as n on n.node_id=r.node_id ".
393 394 395 396
		 "where n.node_id!=n.phys_nodeid ".
		 (defined($exempt_eid) ?
		  "and not (pid='$pid' and eid='$exempt_eid') " : " ") .
		 "group by phys_nodeid");
397 398 399 400
while (my ($node_id,$count) = $result->fetchrow_array) {
    $globalcounts{$node_id} = $count;
}

401
# Find available nodes.
402
#
403 404
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
405
#
406

407
# the ordinary free condition for a local node.
408 409
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
410
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
411
                     "  np.eventstate='" . TBDB_NODESTATE_POWEROFF . "' or ".
412
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
413

414 415 416 417 418
if (defined($pid)) {
    $free_condition = "($free_condition and ".
	"(np.reserved_pid is null or np.reserved_pid='$pid'))";
}

419 420 421 422
# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
423
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
424
}
Chad Barb's avatar
Chad Barb committed
425

426 427 428 429 430 431
# In genimode exclude nodes with exclusion attribute.
if ($genimode) {
    $free_condition = "($free_condition and ".
	"(nat.attrvalue is null or nat.attrvalue=0))";
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
432 433 434 435 436 437 438
# In shared mode, allow allocated nodes whose sharing_mode is set.
if ($useshared) {
    $free_condition = "($free_condition or ".
	"(b.node_id is not null && b.sharing_mode='shared_local' && ".
	" np.eventstate='" . TBDB_NODESTATE_ISUP . "'))";
}

439 440 441 442 443 444
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

445
$result =
446
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
447
		 "a.def_boot_osid,(b.pid is not null and b.eid is not null), ".
448
		 "  np.reserved_pid is not null,np.eventstate, ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
449 450 451
		 "  np.battery_percentage,np.uuid,b.sharing_mode, ".
		 "  ru.load_1min, ru.load_5min, ru.status_timestamp, ".
		 "  a.def_boot_osid ".
452
		 "from nodes as a ".
453 454
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
455
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
456
		 "left join node_types as t on t.type=a.type ".
457 458 459
		 "left join node_attributes as nat on ".
		 "     nat.node_id=a.node_id and ".
		 "     nat.attrkey='protogeni_exclude' ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
460
		 "left join node_rusage as ru on ru.node_id=a.node_id ".
461 462 463 464 465 466
		 "left outer join ". 
		 "  (select type,attrvalue ".
		 "   from node_type_attributes ".
		 "   where attrkey='dedicated_widearea' ".
		 "   group by type) as dedicated_wa_types ".
		 "  on t.type=dedicated_wa_types.type ".
467
		 "where $free_condition and ".
468 469
		 "      (a.role='testnode' and (t.isremotenode=0 or ".
		 "                              dedicated_wa_types.attrvalue=1))");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
470

471 472 473
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
474 475 476
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
Timothy Stack's avatar
 
Timothy Stack committed
477
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved,
Leigh B. Stoller's avatar
Leigh B. Stoller committed
478 479
	$prereserved,$eventstate,$battery_perc,$uuid,$sharing_mode,
	$load_1min,$load_5min,$load_tstamp,$osid) = $result->fetchrow_array) {
480 481 482
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
483 484 485
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
486
    $node_def_boot_osid{$node} = $def_boot_osid;
487
    $node_uuids{$node} = $uuid;
488 489 490 491 492 493

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
494 495 496 497 498 499 500 501 502
    if ($sharing_mode) {
	$sharing_mode{$node} = { "load_1min"   => $load_1min,
				 "load_5min"   => $load_5min,
				 "load_tstamp" => $load_tstamp,
				 "osid"        => $osid};
    }
    else {
	$sharing_mode{$node} = 0;
    }
Timothy Stack's avatar
 
Timothy Stack committed
503 504

    $is_prereserved{$node} = $prereserved;
505 506 507

    $curr_state{$node} = $eventstate;
    $curr_batt{$node} = $battery_perc;
508
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
509

510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534
#
# Find out which nodes are connected to which, so that we can add some special
# features
#
$result = DBQueryFatal("SELECT DISTINCT node_id1, node_id2 " .
                       "  FROM wires");
my %connections = ();
while (my ($node_id1, $node_id2) = $result->fetchrow()) {
    foreach my $nodes ([$node_id1, $node_id2], [$node_id2, $node_id1]) {
        my ($node1, $node2) = @$nodes;
        if ($connections{$node1}) {
            # Check to see if we've already added this one (possible if the
            # nodes appeared in node1,node2 order, then node2,node1
            if (!grep(/^$node2$/, @{$connections{$node1}})) {
                push @{$connections{$node1}}, $node2;
            }
        } else {
            $connections{$node1} = [$node2];
        }
    }
}

#
# Loop through and print out all nodes
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
535
foreach $node (keys(%nodes)) {
536 537 538
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
539
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
540 541
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
542
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
543
    my $uuid = $node_uuids{$node};
544
    
545
    my @types = ("$type:1");
546 547
    my @features;
    my @flags;
548
    my $needvirtgoo = 0;
549

550 551 552 553 554
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
555 556
    if($node_def_boot_osid{$node} && ($node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE"))) { 
557 558 559
	push(@features, "FBSD-NSE:0.0");
    }

560
    # Might be equal, which assign would sum as two, not one!
561 562
    if ($type ne $class) {
	push(@types, "$class:1");
563 564
    }

565
    if (defined($delay_capacity) && $delay_capacity > 0) {
566 567 568 569 570 571
	# Comes from the NS file;
	$delay_capacity = $delaycap_override
	    if (defined($delaycap_override) &&
		$delaycap_override > 0 &&
		$delaycap_override < $delay_capacity);
	
572
	push @types, "delay:$delay_capacity";
573
	push @types, "delay-${type}:$delay_capacity";
574
    }
575

Leigh B. Stoller's avatar
Leigh B. Stoller committed
576 577 578 579 580 581 582 583 584 585 586 587
    #
    # Prototype shared mode.
    #
    if ($sharing_mode{$node}) {
	#
	# Add a feature that says this node should not be picked
	# unless the cooresponding desire is in the vtop. This
	# allows the node to be picked, subject to other type constraints.
	#
	push(@features, "pcshared:1.0");
    }

588 589 590
    #
    # Add any auxiliary types
    #
591 592 593
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
594

595 596 597
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
598 599
	}
	else {
600
	    $realtype = $auxtype;
601
	}
602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

Timothy Stack's avatar
 
Timothy Stack committed
618
    if (defined($areamap{$node})) {
Timothy Stack's avatar
 
Timothy Stack committed
619
	push @features, $areamap{$node};
Timothy Stack's avatar
 
Timothy Stack committed
620 621
    }

622
    my $cpu_ram_features_present = 0;
623 624 625 626
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
627
	push @types, "*lan:*";
628 629 630 631
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
632
	# Add CPU and RAM information
633
	$cpu_ram_features_present++;
634 635
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
636
	# Put this silly feature in so that we can try to keep vnodes
637 638 639 640
	# on the same pnode they were before - but only if updating
        if ($exempt_eid) {
            push @features, "${node}:0.0";
        }
641 642
    }

643
    if ($simstuff && defined($simnode_capacity) && $simnode_capacity > 0) {
644 645 646 647 648 649 650 651 652
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
653
	# Add CPU and RAM information
654
	$cpu_ram_features_present++;
655 656 657 658
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
659 660 661 662
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
663 664
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
665
    }
666

667
    # Add features
668
    push(@features, @{$typemap{$type}->{'FEATURES'}});
669 670
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
671 672
    }

673
    #
Leigh B. Stoller's avatar
Leigh B. Stoller committed
674
    # Add in OS features.
675
    #
Leigh B. Stoller's avatar
Leigh B. Stoller committed
676 677 678 679 680 681 682 683 684 685 686 687 688 689
    if ($sharing_mode{$node}) {
	#
	# A shared node is running just one OS, and we put that in
	# so that the user can specify which of the current VM types
	# is wanted.
	#
	my $osid = $sharing_mode{$node}->{'osid'};
	push(@features, "OS-$osid:0.5");
    }
    elsif ($node_type_osids{$type}) {
	#
	# Add in features for all of the OSes that this node (as
	# evidenced by its type) can support
	#
690 691
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }
692 693 694 695 696 697 698 699 700 701 702
    elsif (! $typemap{$type}->{'IMAGEABLE'} &&
	   defined($typemap{$type}->{'OSID'})) {
	#
	# If node is not imageable (and thus no entries in osidtoimageid,
	# then assume it always has its default OSID loaded and ready to
	# go, so that assign will agree to the allocation (assign_wrapper
	# adds a desire that says it has to be running the OSID the user
	# has selected, or the default OSID from the node_types table).
	#
	push @features, map "OS-$_:0", $typemap{$type}->{'OSID'};
    }
703

704 705 706 707 708 709 710 711
    # Add features indicating what this node has connections to
    if ($connections{$node}) {
        my @connected_to  = @{$connections{$node}};
        foreach my $other_end (@connected_to) {
            push(@features,"connected-to-$other_end:0.0");
        }
    }

712 713
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
714
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
715 716 717
	push(@features,"already_reserved:0");
    }

Timothy Stack's avatar
 
Timothy Stack committed
718 719 720 721
    if ($is_prereserved{$node}) {
	push(@features,"prereserved:0.9");
    }

722 723 724 725 726 727 728 729 730
    # For robots, prefer ones that are already powered on and/or won't need to
    # be recharged soon.
    if (defined($curr_state{$node}) && ($curr_state{$node} eq TBDB_NODESTATE_POWEROFF)) {
	push(@features,"poweroff:0.9");
    }
    if (defined($curr_batt{$node})) {
	push(@features,"powerneeded:" . (1.0 - $curr_batt{$node} / 100.0));
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
731 732 733 734 735 736 737 738
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

739 740 741 742 743 744 745 746 747 748 749
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
750
	}
751 752
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
753
    }
754

755
    my @parse_features = split(" ", join(" ", @features));
756 757
    print_node($node, \@types, \@parse_features, \@flags, $uuid,
	       $nodetointerface{$node});
Leigh B. Stoller's avatar
Leigh B. Stoller committed
758 759
}

760 761 762 763 764 765 766 767 768 769 770
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
771 772 773 774
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
775
if ($widearea) {
776 777 778 779 780 781 782 783
    #
    # Set up 'the Internet' as a fake switch that all widearea nodes can
    # talk to.
    # Some day, it may make sense to connect control net ports to this
    # switch.
    #
    my $fake_inet_switch = "internet";
    my @inet_protos = ("ipv4");
784
    my @types = map("*$_:*", @inet_protos);
785
    print_node($fake_inet_switch, \@types, [], [], undef, []);
786 787 788
    
    #
    # Note - there is currently an assumption in this query that widearea nodes
789
    # have only one control interface.
790
    #
791
    $result =
792
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site,".
793
                     "i.iface,wn.bwlimit,n.uuid ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
794 795 796 797
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
798
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
799
		     "     wn.node_id=n.node_id ".
800
		     "left join interfaces as i on ".
801
		     "     n.node_id=i.node_id and ".
802 803 804 805 806 807 808
		     "     i.role='" . TBDB_IFACEROLE_CONTROL() . "' ".
		     "left outer join ". 
		     "  (select type,attrvalue ".
		     "   from node_type_attributes ".
		     "   where attrkey='dedicated_widearea' ".
		     "   group by type) as dedicated_wa_types ".
		     "  on nt.type=dedicated_wa_types.type ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
809
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
810 811
		     "        nt.isvirtnode=0 and ".
		     "        dedicated_wa_types.attrvalue is NULL)");
812
    
813
    while (($physnode,$ptype,$status,$mpid,$meid,$site,$iface,$bwlimit,$uuid)
Leigh B. Stoller's avatar
Leigh B. Stoller committed
814
	   = $result->fetchrow_array) {
815
	my $class = $typemap{$ptype}->{'CLASS'};
816 817 818
	my @types;
	my @features;
	my @flags;
819 820 821 822 823 824 825 826 827 828 829 830 831 832 833
	my $maxvnodes;

	#
	# Grab the global allocation count of vnodes on this pnode (if there
	# is one). This modifies the counts below.  If the count has already
	# been reached, then do not put this node into the ptop file.
	#
	$maxvnodes =
	    $typemap{$ptype}->{'TYPEINFO'}->GetAttribute("global_capacity");
	
	if (defined($maxvnodes) && exists($globalcounts{$physnode})) {
	    $maxvnodes -= $globalcounts{$physnode};
	    next
		if ($maxvnodes <= 0);
	}
834

835 836 837 838 839
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
840 841
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
842 843 844 845
	    # But not in genimode.
	    next
		if ($genimode);
	    
846 847 848
	    push @features, "down:1";
	}

849 850 851 852 853 854 855
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

856 857 858
	#
	# Add any auxiliary types.
	#
859 860
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
861

862 863 864
	    $count = $maxvnodes
		if (defined($maxvnodes) && $maxvnodes < $count);

Leigh B. Stoller's avatar
Leigh B. Stoller committed
865 866 867 868 869
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
870
	    }
871
	    push(@types, $auxinfo);
872 873 874 875 876
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

877 878 879
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

880
	# Add features
881
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
882 883
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
884 885
	}

886 887 888 889 890 891 892 893
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

894 895 896 897 898 899 900 901 902 903
        #
        # Put in a feature indicating whether or not this node has a bandwidth
        # cap
        #
        if (!defined($bwlimit) || $bwlimit eq "-1") {
	    push @features, "nobwlimit:0";
        } else {
	    push @features, "bwlimit:0";
        }

904 905
	print_node($physnode, \@types, \@features, \@flags, $uuid,
		   $nodetointerface{$physnode});
906 907 908 909 910 911 912

        #
        # Print out a link to the 'internet'.
        # Note - we make up a fake bandwidth. In the future, maybe we
        # could put something real in there.
        #
        if ($iface) {
913 914 915
	    print_simple_link($physnode, $iface,
			      $fake_inet_switch, "(null)",
			      100000, 0, 0, @inet_protos);
916
        }
917 918 919

	# Insert into nodes array in case there are wires entries.
	$nodes{$physnode} = $ptype;
920 921 922
    }
}

923 924 925 926 927 928 929 930 931 932 933 934 935 936 937
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
938 939
}

940 941 942 943 944 945 946 947 948 949
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
950 951 952 953 954 955 956
$result = DBQueryFatal("SELECT node_id, iface, card, port, IP ".
		       "FROM interfaces");

while (($node,$iface,$card,$port,$IP) = $result->fetchrow_array) {
    next
	if ($prune && $is_reserved{$node} && (!defined($IP) || $IP eq ""));

957 958
    $interfacecardports{"$node:$iface"} = [$card,$port];
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
959 960 961 962 963 964 965 966 967
# Read interface_state
$result = DBQueryFatal("select * from interface_state");

while (my $ref = $result->fetchrow_hashref()) {
    my $node  = $ref->{'node_id'};
    my $iface = $ref->{'iface'};
    
    $interfacestate{"$node:$iface"} = $ref;
}
968

969
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
970
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
971
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
972
       $result->fetchrow_array) {
973
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
974
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
975

976 977 978 979 980
        
        # Types for this link - for the time being, we assume that all
        # links are Ethernet, though this will certaily change later.
        my $basetype = "ethernet";

981 982
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
983 984 985 986
	$iface1bw = get_ifacebw($node1,$card1,$port1,$basetype);
	$iface2bw = get_ifacebw($node2,$card2,$port2,$basetype);

        my @types = ($basetype);
987 988 989 990

	next
	    if (! exists($interfacecardports{"$node1:$iface1"}));
	
991
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
992
	# wires table links to the switch always come as node2.
993 994 995
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
996 997
	    $bw = $iface1bw;
	} else {
998 999 1000 1001 1002
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw