ptopgen.in 22.8 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2
3
4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6
7
8
# All rights reserved.
#

9
10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12
13
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
14
15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
16
	  "       -p include nodes the project has permission to use\n".
17
	  "       -e include given experiments resources\n" .
18
19
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
20
	  "       -r Include stuff for topologies with widearea nodes\n".
21
	  "       -s Include stuff for topologies with simulated nodes\n".
22
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23
24
	  "       -m Override multiplex_factor\n".
	  "       -n Add in modelnet core and edge node features\n");
25
26
    exit(-1);
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
my $optlist = "s:e:m:vp:rSan:";
28
my $mfactor;
29
my $virtstuff = 0;
30
my $widearea  = 0;
31
my $simstuff  = 0;
32
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
33
34
my $mnetcores = 0;
my $mnetedges = 0;
35

36
37
38
39
#
# Turn off line buffering on output
#
$| = 1;
40
41
42
43
44
45
46
47
48
49
50
51

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

52
53
54
55
56
57
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

58
59
######################################################################

60
my $TBROOT = "@prefix@";
61
use lib '@prefix@/lib';
62
require exitonwarn;
63
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
64

65
66
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

67
68
69
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
70
71
my %typemap       = ();
my %auxtypemap    = ();
72

73
74
75
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

76
my $pid;
77
my $exempt_eid;
78
my $switchtouse;
79

80
81
82
83
84
85
86
87
88
89
90
91
92
93
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
94
95
96
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
97
98
99
if (defined($options{"v"})) {
    $virtstuff = 1;
}
100
101
102
if (defined($options{"r"})) {
    $widearea = 1;
}
103
104
105
if (defined($options{"S"})) {
    $simstuff = 1;
}
106
107
108
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
109
110
111
if (defined($options{"a"})) {
    $allnodes = 1;
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
112
113
114
115
116
117
118
119
120
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
121
if (defined($options{"e"})) {
122
123
124
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
125
126
}

127
# Read class/type maps
128
my $result =
129
    DBQueryFatal("select class,type,delay_capacity,".
130
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
131
		 "   speed, RAM, trivlink_maxspeed ".
132
		 "from node_types");
133
while (($class,$type,$delaycapacity,
134
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed)
135
	    = $result->fetchrow_array) {
136
137
138
139
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
140
    $map->{'SIMCAP'}   = $simcapacity;
141
    $map->{'ISVIRT'}   = $isvirt;
142
143
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
144
    $map->{'TRIVSPEED'}= $trivspeed;
145
146
147
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
148
149
150
151
152
153
154
155
156
157
158

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
159
160
161
162
163
164
165
166
167
168
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
169
170
}

171
172
173
174
175
176
177
178
179
180
181
182
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
183
184
185
186
187
188
189
190
191
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
192
    push @{$auxtypes{$node_id}}, "$type:$count";
193
}
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
214
215
}

216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
$result = DBQueryFatal("select osid, nextosid from os_info where " .
    "nextosid is not null");
while (my ($osid, $nextosid) = $result->fetchrow()) {
    #
    # Check to see if they were allowed to use the real OSID
    #
    if ($osid_node_types{$nextosid}) {
	foreach my $type (@{$osid_node_types{$nextosid}}) {
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

268
# Print switches
269
if (defined($switchtouse)) {
270
    print "node $switchtouse switch:1 *lan:*\n";
271
272
273
274
275
276
277
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
278
	print "node $switch switch:1 *lan:*\n";
279
280
	$switches{$switch} = 1;
    }
281
}
282

283
# Find available nodes.
284
#
285
286
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
287
#
288

289
# the ordinary free condition for a local node.
290
291
292
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "')) ";
293
294
295
296
297

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
298
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
299
}
Chad Barb's avatar
Chad Barb committed
300

301
302
303
304
305
306
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

307
$result =
308
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
309
310
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
311
312
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
313
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
314
		 "left join node_types as t on t.type=a.type ".
315
		 "where $free_condition and ".
316
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
317

318
319
320
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
321
322
323
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
324
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
325
    = $result->fetchrow_array) {
326
327
328
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
329
330
331
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
332
    $node_def_boot_osid{$node} = $def_boot_osid;
333
334
335
336
337
338

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
339
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
340
341

foreach $node (keys(%nodes)) {
342
343
344
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
345
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
346
347
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
348
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
349
    
350
    my @types = ("$type:1");
351
352
    my @features;
    my @flags;
353
    my $needvirtgoo = 0;
354

355
356
357
358
359
360
361
362
363
364
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

365
    # Might be equal, which assign would sum as two, not one!
366
367
    if ($type ne $class) {
	push(@types, "$class:1");
368
369
    }

370
    if ($delay_capacity > 0) {
371
	push @types, "delay:$delay_capacity";
372
    }
373

374
375
376
    #
    # Add any auxiliary types
    #
377
378
379
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
380

381
382
383
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
384
385
	}
	else {
386
	    $realtype = $auxtype;
387
	}
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

404
    my $cpu_ram_features_present = 0;
405
406
407
408
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
409
	push @types, "*lan:*";
410
411
412
413
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
414
	# Add CPU and RAM information
415
	$cpu_ram_features_present++;
416
417
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
418
419
420
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
421
422
    }

423
424
425
426
427
428
429
430
431
432
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
433
	# Add CPU and RAM information
434
	$cpu_ram_features_present++;
435
436
437
438
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
439
440
441
442
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
443
444
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
445
    }
446

447
    # Add features
448
    push(@features, @{$typemap{$type}->{'FEATURES'}});
449
450
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
451
452
    }

453
454
455
456
457
458
459
460
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }

461
462
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
463
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
464
465
466
	push(@features,"already_reserved:0");
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
467
468
469
470
471
472
473
474
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

475
476
477
478
479
480
481
482
483
484
485
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
486
	}
487
488
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
489
    }
490
491
492
493
494

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


495
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
496
497
}

498
499
500
501
502
503
504
505
506
507
508
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
509
510
511
512
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
513
514
if ($widearea) {
    $result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
515
516
517
518
519
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site ".
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
520
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
521
522
523
		     "     wn.node_id=n.node_id ".
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
524
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
525
526
    while (($physnode,$ptype,$status,$mpid,$meid,$site)
	   = $result->fetchrow_array) {
527
	my $class = $typemap{$ptype}->{'CLASS'};
528
529
530
531
	my @types;
	my @features;
	my @flags;

532
533
534
535
536
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
537
538
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
539
540
541
	    push @features, "down:1";
	}

542
543
544
545
546
547
548
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

549
550
551
	#
	# Add any auxiliary types.
	#
552
553
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
554

Leigh B. Stoller's avatar
Leigh B. Stoller committed
555
556
557
558
559
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
560
	    }
561
	    push(@types, $auxinfo);
562
563
564
565
566
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

567
568
569
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

570
	# Add features
571
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
572
573
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
574
575
576
577
578
579
580
581
582
583
	}

	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

584
# Read interfaces
585
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
586
		     " from interfaces");
587
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
588
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
 
Chad Barb committed
589
    if ((defined $type) && ($type ne "")) {
590
591
592
593
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
609
610
}

611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
$result = DBQueryFatal("SELECT node_id, iface, card, port FROM interfaces");
while (($node,$iface,$card,$port) = $result->fetchrow_array) {
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

626
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
627
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
628
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
629
       $result->fetchrow_array) {
630
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
631
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
632
633
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
634
635
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
636
637
638
639
640
641
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
642
643
	    $bw = $iface1bw;
	} else {
644
645
646
647
648
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
649
	}
650
	if (defined($switches{$node2})) {
651
652
	    $used_switches{$node2} = 1;
	}
653
654
655
656
657
658
659
660
661
662
663
664
665
666
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
667
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
668
669
	}
    } 
670
}
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
691
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

721
722
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
723
724
    print "link link-$interconnect $src $dst $interconnects{$interconnect} " .
	"0 0 1 ethernet\n";
725
}
726

727
#
728
# Fake switch. Hardwired for now. 
729
#
730
731
732
my @wireless_protos = ("80211", "80211a", "80211b", "80211g");
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
733

734
735
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
736

737
738
    next
    if (!defined($nodes{$node}));
739
	
740
741
742
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
743

744
745
746
747
748
749
750
751
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
752

753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
769
770
	}
    }
771
772
773
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
774
775
776
777
}

exit(0);

778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
	return $interfacemap{"$node:$card:$port"};
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

794
795
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
796
sub get_ifacebw {
797
    ($node,$card,$port,$protocol) = @_;
798
    if (defined($interfacetypes{"$node:$card:$port"})) {
799
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
800
801
802
    }
    else {
	return $default_switchport_speed;
803
804
    }
}
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}