assign_wrapper.in 40 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
#!/usr/bin/perl -w

# This function as the main assign loop.  It converts the virtual
# topology into a top input including LAN and delay translation.  It
# then snapshots the current testbed physical state and runs assign,
# looping a couple times if assign fails.  When assign successfully
# completes it will interpret the results.  Attempt to match any
# existing portmap entries and then update the delays and vlans table.

# Syntax: assign_wrapper <pid> <eid>

# Caveats:
#  The support for direct and interswitch links has not been testbed much.

# Settings
# delaythresh is the maximum delay in ms above which a delay node is needed.
17
#  (Note that the DB represents delays as floating point numbers)
Leigh B. Stoller's avatar
Leigh B. Stoller committed
18
# maxrun is maximum number of times we run assign.
19
20
# delaywithswitch if 1 will use the switch to delay when possible.  Currently
#  this only works for 10mbit links.
21
$delaythresh = 2;
22
$maxrun = 20;
23
$delaywithswitch=0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
24

25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
#
# Some handy constants. Speed in Mbits/sec and Kbits/sec units.
# The conversion routine is to make explicit that we operate with two
# different sets of units. One is the topology, which is in Kbps now.
# The second is the physical description, which has been changed to
# Kbps in the DB (and in ptopgen).
#
# Its probably a good idea to leave portbw (current_speed) in Mbs, since
# those numbers are used at the switch and the interfaces, which really
# only think in Mbps.
#
my $S10Mbs  = 10;
my $S100Mbs = 100;
my $S10Kbs  = 10000;
my $S100Kbs = 100000;
sub BWConvert($) {
    #
    # Use this if physical units are in Mbs (used to be).
    #
    #my $bw = $_[0] / 1000;
    
    my $bw = $_[0];
    return $bw;
}

50
$DELAYCAPACITY = @DELAYCAPACITY@;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
51
$TBROOT = "@prefix@";
52
$ENV{'PATH'} = "/usr/bin:$TBROOT/libexec:$TBROOT/sbin:$TBROOT/bin";
53

54
55
use lib '@prefix@/lib';
use libdb;
56
use libtestbed;
57
require exitonwarn;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
58

59
60
61
62
63
#
# Turn off line buffering on output
#
$| = 1;

64
65
66
67
68
69
70
use Getopt::Std;

getopts('v',\%opt);

sub usage {
	print "Usage: $0 [-v] pid eid\n";
	print "		-v enables verbose output\n";
71
	exit(-1);
72
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
73

74
my $verbose = 0;
75
76
77
78
79
if ($opt{v}) {
	$verbose = 1;
}

if (@ARGV != 2) {
80
	usage();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
81
}
82

Leigh B. Stoller's avatar
Leigh B. Stoller committed
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
($pid,$eid) = @ARGV;

$ptopfile = "$pid-$eid-$$.ptop";

sub printdb {
    if ($verbose) {
	print $_[0];
    }
};

######################################################################
# Step 1 - Setup virtual topology
#
# Here we need to read the virtual topology in from the virt_nodes
# and virt_lans table.  We then need to add delay and lan nodes as
# necessary.
#
# Conversion details:
#   Let L be a LAN with N members.
#   If N == 2 
#      Let N1 be node 1
#      Let N2 be node 2
#      If L is delayed
#         Generate delay node D
#         Link N1 to D
#         Link N2 to D
#      Else
#         Link N1 to N2
#   Else
#      Generate lan node A
#      If L is delayed
#        Foreach node N in L
#           Generate delay node DN
#           Link A to DN
#           Link N to DN
#      Else
#        Foreach node N in L
#           Link N to A
#
# Datastructures:
#  nodes is indexed by virtual node and contains the node type.
124
#  isvirtnode is indexed by virtual node and says whether the node is "virtual"
Leigh B. Stoller's avatar
Leigh B. Stoller committed
125
126
127
128
129
#  nodelans is indexed by virtual node and contains a list of
#    <port>:<lan> that it is connected to.
#  ips is indexed by nodeport and contains the IP addresses.
#  lans is indexed by virtual lan and is a list of nodeport members.
#  delayinfo is indexed by virtual lan:node:port and is a list of delay,
Christopher Alfeld's avatar
Christopher Alfeld committed
130
131
#    bandwidth, lossrate, rdelay, rbandwidth, rlossrate.  Where r* indicates
#    switch->node and the others indicate node->switch.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
132
133
134
135
#  okbandwidths is indexed by bandwidth and is just a set.
#  lannodes is indexed by physical name is the set of lan nodes.
#  interfacespeed is indexed by type and contains the bandwidth.
#  delaynodes is indexed by link name and contains [delay,bw,loss]
136
#  portbw is indexed by virtual nodeport and contains the bandwidth
137
138
139
140
#    of that port. Note that port bandwidth in the interfaces table is
#    left in Mbps units for now. Thats inconsistent, I know. For LANs with
#    other bandwidths the port speed will be 100 and a delay node will
#    be inserted.
141
142
#  fixed_nodes is indexed by virtual node name and points to physical node
#   name.
Christopher Alfeld's avatar
Christopher Alfeld committed
143
#  vtypes is indexed by vtype name and is a list of {weight types}.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
#
# Delay node names:
#  delay nodes are named tbdelayXX N > 2
#   and tbsdelayXX for N == 2.
# 
# Lan node nameS:
#  lan nodes are named lan/<virtual lan>
######################################################################

# Shark Hack
# For each LAN we replace all the sharks in the LAN with a single
# shark shelf node.  After this goes through assign we pull them
# all back out.
#
# sharkshelves is indexed by virtual shelf name and is a list of
# the virtual nodes in it.
# sharkshelfid is used to generate ids for shark shelves.
$sharkshelfid = 0;

# delayid is used to generate ids for delay nodes.
$delayid = 0;

printdb "Generating TOP file.\n";

# Let's figure out what kind of links we have.
printdb "Finding interface speeds:";
170
171
my $result = DBQueryFatal("SELECT type,max_speed from interface_types");
while (($type,$bandwidth) = $result->fetchrow_array) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
172
173
174
175
    $okbandwidths{$bandwidth} = 1;
    $interfacespeed{$type} = $bandwidth;
    printdb " $bandwidth";
}
176
$result->finish;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
177
178
179
printdb "\n";

printdb "Loading virt_nodes.\n";
180
181
182
183
184
185
186
187
$result =
    DBQueryFatal("select distinct vname,ips,vn.type,fixed,nt.isvirtnode ".
		 " from virt_nodes as vn ".
		 "left join node_types as nt on ".
		 " nt.type=vn.type or nt.class=vn.type ".
		 "where pid='$pid' and eid='$eid'");

while (($vname,$ips,$type,$fixed,$isvirt) = $result->fetchrow_array) {
188
189
190
191
192
193
194
195
    if (! defined($fixed))  {$fixed  = "";}
    #
    # if its a vtype, no entry in node_types. vtypes break virtual nodes.
    # Need to look inside the vtype and make sure no mixing of vnodes and
    # physnodes. Later ...
    #
    if (! defined($isvirt)) {$isvirt = 0;}
    
196
    printdb "  $vname $type $ips $fixed $isvirt\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
197
198
199
200
201
202
203
204
205
206
    # We need to check the names to make sure they won't clash with
    # our internal delay node names.
    if (($vname =~ /^tbdelay\d+/) ||
	($vname =~ /^tbsdelay\d+/)) {
	print STDERR "Warning: $vname is a reserved name.  Working around.\n";
	($num) = ($vname =~ /(\d+)/);
	$delayid = $num + 1;
    }
    $nodes{$vname} = $type;
    $nodelans{$vname} = [];
207
208
209
210
211
212
213
214
215
    #
    # VIRTNODE HACK: For a virtual node, we want to ignore the link info.
    # 
    $isvirtnode{$vname} = $isvirt;
    if (! $isvirt) {
	foreach $ipinfo (split(" ",$ips)) {
	    ($port,$ip) = split(":",$ipinfo);
	    $ips{"$vname:$port"} = $ip;
	}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
216
    }
217
218
219
    if ($fixed ne "") {
	$fixed_nodes{$vname} = $fixed;
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
220
}
221
$result->finish;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
222
223

printdb "Loading virt_lans.\n";
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
$result =
    DBQueryFatal("select vname,member,delay,bandwidth,lossrate," .
		 "rdelay,rbandwidth,rlossrate " .
		 "from virt_lans where pid='$pid' and eid='$eid'");

#
# VIRTNODE HACK: Virtual nodes are special.
#
# Prepass the table looking for those lans that have a virtual node
# as a member. We want to ignore those (both sides) if its a duplex
# link, but if its in a lan then we only want to ignore that particular
# member of the lan. So, record the number of times we see the lan.
# See below.
#
my %skiplans = ();
my %lancount = ();

while (($vname,$member) = $result->fetchrow_array) {
    ($node,$port) = split(":",$member);

    if (defined($lancount{$vname})) {
	$lancount{$vname} += 1;
    }
    else {
	$lancount{$vname} = 1;
    }
    
    if ($isvirtnode{$node}) {
	$skiplans{$vname} = 1;
    }
}
$result->dataseek(0);

#
# Now do the real pass.
# 
Christopher Alfeld's avatar
Christopher Alfeld committed
260
261
while (($vname,$member,$delay,$bandwidth,$lossrate,
	$rdelay,$rbandwidth,$rlossrate) = $result->fetchrow_array) {
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
    ($node,$port) = split(":",$member);

    #
    # VIRTNODE HACK: Virtual nodes are special.
    #
    # If its a duplex link involving a virtnode, skip it. 
    # If its a lan (not a duplex link) then drop just that member.
    # We do not want to have assign deal with these. The nodes are
    # allocated as unconnected, and we deal with it later.
    # 
    if ($skiplans{$vname} &&
	($lancount{$vname} == 2 || $isvirtnode{$node})) {
	    next;
    }
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
277
278
279
280
    if (! defined($lans{$vname})) {
	$lans{$vname} = [];
    }
    push(@{$lans{$vname}},$member);
Christopher Alfeld's avatar
Christopher Alfeld committed
281
282
    $delayinfo{"$vname:$member"} = [$delay,$bandwidth,$lossrate,
				    $rdelay,$rbandwidth,$rlossrate];
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312

    #
    # Grab the Q stuff from virt_lans. I'm keeping this separate for
    # now until I understand whats going on. There are no "r" params
    # either. I have no idea how do to this stuff for lans, and for
    # duplex links the "r" params are not necessary. Each virt_lans
    # entry gives the params towards the switch, which equal the
    # reverse params for the other member. 
    #
    my $query_result =
	DBQueryFatal("select q_limit,q_maxthresh,q_minthresh,q_weight, ".
		     "       q_linterm,q_qinbytes,q_bytes,q_meanpsize, ".
		     "       q_wait,q_setbit,q_droptail,q_red,q_gentle ".
		     "from virt_lans ".
		     "where pid='$pid' and eid='$eid' and ".
		     "      vname='$vname' and member='$member'");
    
    my ($q_limit,$q_maxthresh,$q_minthresh,$q_weight,$q_linterm,
	$q_qinbytes,$q_bytes,$q_meanpsize,$q_wait,$q_setbit,
	$q_droptail,$q_red,$q_gentle) = $query_result->fetchrow_array;
    
    $queueinfo{"$vname:$member"} =
	[$q_limit,$q_maxthresh,$q_minthresh,$q_weight,$q_linterm,
	 $q_qinbytes,$q_bytes,$q_meanpsize,$q_wait,$q_setbit,
	 $q_droptail,$q_red,$q_gentle];

    if ($q_red) {
	$mustdelay{$vname} = 1;
    }
    
313
314
315
316
317
318
319
320
321
322
323
324
    #
    # XXX - Whenever a delay node is inserted, port speeds are set to
    #       100Mbs, even if they requested exactly 10Mbs. This is a
    #       simplification. At some point we might want to force all the
    #       ports along the way to 10Mbs, and have the delay node worry
    #       about delay only, and not bandwidth. That will be harder to
    #       to do in this mess. See companion XXX below where the delays
    #       table is initialized. Initially, we set the speed to 10Mbs,
    #       if a delay node is insterted below, it resets this to 100Mbs.
    # 
    if ($bandwidth == $S10Kbs && $delaywithswitch) {
	$portbw{$member} = $S10Mbs;
325
    } else {
326
	$portbw{$member} = $S100Mbs;
327
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
328
    push(@{$nodelans{$node}},"$port:$vname");
329
    printdb "  portbw of $member = $portbw{$member}\n";
Christopher Alfeld's avatar
Christopher Alfeld committed
330
    printdb "  $vname $member - $delay $bandwidth $lossrate $rdelay $rbandwidth $rlossrate\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
331
332
    printdb "    Added $port:$vname to nodelans of $node\n";
}
333
$result->finish;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
334

335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
#
# Check event list. Anytime we find an event to control a link, we need
# to drop a delay node in. start/stop especially, since thats the easiest
# way to do that, even if the link has no other traffic shaping in it. 
# 
printdb "Checking events for LINK commands.\n";
$result =
    DBQueryFatal("select distinct vname from eventlist as ex ".
		 "left join event_eventtypes as et on ex.eventtype=et.idx ".
		 "left join event_objecttypes as ot on ex.objecttype=ot.idx ".
		 "where ot.type='LINK' and ex.pid='$pid' and ex.eid='$eid'");
while (($vname) = $result->fetchrow_array) {
    $mustdelay{$vname} = 1;
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
350
351
352
353
354
355
356
# Shark hack
foreach $lan (keys(%lans)) {
    $realmembers = [];
    $sharks = [];
    $hassharks = 0;
    foreach $member (@{$lans{$lan}}) {
	($node) = (split(":",$member))[0];
357
	if (($nodes{$node} eq "shark") || ($nodes{$node} eq "dnard")) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
358
359
360
361
362
363
364
365
366
367
368
369
	    push(@$sharks,$member);
	    $hassharks = 1;
	} else {
	    push(@$realmembers,$member);
	}
    }
    if ($hassharks) {
	$shelfid = "sharkshelf$sharkshelfid";
	printdb "  Creating shark shelf: $shelfid (" . 
	    join(" ",@$sharks) . ")\n";
	$sharkshelfid++;
	$sharkshelves{$shelfid} = $sharks;
370
	$delayinfo{"$lan:$shelfid:uplink"} = [0,$S100Kbs,0.0,
371
					      0,$S100Kbs,0.0];
Leigh B. Stoller's avatar
Leigh B. Stoller committed
372
373
374
375
376
377
378
	push(@$realmembers,"$shelfid:uplink");
	$nodes{$shelfid} = "shark-shelf";
    }
    $lans{$lan} = $realmembers;
}
# End shark hack

Christopher Alfeld's avatar
Christopher Alfeld committed
379
380
381
382
383
384
385
386
387
# Load virt types
printdb "Loading virt_vtypes.\n";
$result = DBQueryFatal("SELECT name,weight,members from virt_vtypes" .
		       " where pid=\"$pid\" and eid=\"$eid\"");
while (($name,$weight,$types) = $result->fetchrow_array) {
    printdb "  $name $weight $types\n";
    $vtypes{$name} = "$weight $types";
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
388
# Open the TOP file
389
$topfile = "$eid.top";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
390
open(TOPFILE,"> $topfile") || do {
391
392
    die("*** $0:\n".
	"    Could not open $topfile.\n");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
393
394
};

Christopher Alfeld's avatar
Christopher Alfeld committed
395
396
397
398
# Print out vtypes
foreach $vtype (keys(%vtypes)) {
    print TOPFILE "make-vclass $vtype $vtypes{$vtype}\n";
}
399
400
401
402

$nodes=0;
$delaynodes=0;

Leigh B. Stoller's avatar
Leigh B. Stoller committed
403
404
foreach $node (keys(%nodes)) {
    # Shark hack
405
    if (($nodes{$node} ne "shark") && ($nodes{$node} ne "dnard")) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
406
	print TOPFILE "node $node $nodes{$node}\n";
407
408
409
	if ($nodes{$node} ne "shark-shelf") {
	    $nodes++;
	}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
410
411
412
413
414
415
    }
    # End Shark hack
}

foreach $lan (keys(%lans)) {
    @members = @{$lans{$lan}};
416
    printdb "$lan - " . join(" ",@members) . "\n";
417
418
419
420
421
422
423
424
425
426
427
    # Shark hack for rvr
    $sharks = 0;
    $nonsharks = 0;
    foreach $member (@members) {
	($node) = (split(":",$member))[0];
	if ($nodes{$node} eq "shark-shelf") {
	    $sharks++;
	} else {
	    $nonsharks++;
	}
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
428
429
430
431
    if ($#members == 1) {
	($nodeport0,$nodeport1) = @members;
	$node0 = (split(":",$nodeport0))[0];
	$node1 = (split(":",$nodeport1))[0];
Christopher Alfeld's avatar
Christopher Alfeld committed
432
433
434
435
436
437
438
439
440
441
442
443
444
445
	($delay0,$bw0,$loss0,
	 $rdelay0,$rbw0,$rloss0) = @{$delayinfo{"$lan:$nodeport0"}};
	($delay1,$bw1,$loss1,
	 $rdelay1,$rbw1,$rloss1) = @{$delayinfo{"$lan:$nodeport1"}};
	# Here the r's aregoing to be 1->0 and the others 0->1
	$delay = $delay0+$rdelay1;
	$loss = 1-(1-$loss0)*(1-$rloss1);
	$bw = &min($bw0,$rbw1);
	$rdelay = $rdelay0+$delay1;
	$rloss = 1-(1-$rloss0)*(1-$loss1);
	$rbw = &min($rbw0,$bw1);
	$bandwidth = &getbandwidth(&min($bw0,$rbw1));
	$rbandwidth = &getbandwidth(&min($rbw0,$bw1));
	if ((($delay >= $delaythresh) ||
446
447
448
449
450
	     (($bw != $S100Kbs) && ($bw != $S10Kbs)) ||
	     (($delaywithswitch == 0) && 
	      (($bw != $S100Kbs) && (($sharks == 0) || ($nonsharks > 1)))) || 
	     ($loss != 0)) ||
	    (defined($mustdelay{$lan})) ||
Christopher Alfeld's avatar
Christopher Alfeld committed
451
452
453
454
455
	    (($rdelay >= $delaythresh) ||
	     (($rbw != $S100Kbs) && ($rbw != $S10Kbs)) ||
	     (($delaywithswitch == 0) && 
	      (($rbw != $S100Kbs) && (($sharks == 0) || ($nonsharks > 1)))) || 
	     ($rloss != 0))) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
456
	    $delayname = "tbsdelay$delayid";
Christopher Alfeld's avatar
Christopher Alfeld committed
457
458
	    $delaynodes{"linksdelaysrc/$lan"} = [$delay,$bw,$loss,
						 $rdelay,$rbw,$rloss];
Leigh B. Stoller's avatar
Leigh B. Stoller committed
459
460
461
462
	    printdb "Delay node linksdelaysrc/$lan ($delayname) = " . 
		join(" ",@{$delaynodes{"linksdelaysrc/$lan"}}) . "\n";
	    $delayid++;
	    print TOPFILE "node $delayname delay\n";
463
	    $delaynodes++;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
464
465
466
467
	    print TOPFILE "link linksdelaysrc/$lan $node0 $delayname"
		. " $bandwidth\n";
	    print TOPFILE "link linksdelaydst/$lan $node1 $delayname"
		. " $bandwidth\n";
468
469
470
471
472
473
474
475
	    #
	    # Ports are set to 100Mbs when a link gets a delay node.
	    # This can override initialization above cause we could not
	    # tell earlier if the link was going to get a real delay node
	    # or just a delaywithswitch.
	    #
	    $portbw{$nodeport0} = $S100Mbs;	    
	    $portbw{$nodeport1} = $S100Mbs;	    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
476
477
478
	} else {
	    print TOPFILE "link linksimple/$lan $node0 $node1 $bandwidth\n";
	}
479
    } elsif ($#members != 0) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
480
481
482
	print TOPFILE "node lan/$lan lan\n";
	$lannodes{"lan/$lan"} = 1;
	foreach $member (@members) {
Christopher Alfeld's avatar
Christopher Alfeld committed
483
484
	    ($delay,$bw,$loss,
	     $rdelay,$rbw,$rloss) = @{$delayinfo{"$lan:$member"}};
Leigh B. Stoller's avatar
Leigh B. Stoller committed
485
	    $bandwidth = &getbandwidth($bw);
Christopher Alfeld's avatar
Christopher Alfeld committed
486
	    $rbandwidth = &getbandwidth($rbw);
Leigh B. Stoller's avatar
Leigh B. Stoller committed
487
	    ($node) = (split(":",$member))[0];
488
489
# XXX The expression below should be modified for better bandwidth support.
# Probably needs to happen post assign somehow.
Christopher Alfeld's avatar
Christopher Alfeld committed
490
	    if ((($delay >= $delaythresh) ||
491
492
493
494
495
496
		 (($bw != $S100Kbs) && ($bw != $S10Kbs))  ||
		 (($delaywithswitch == 0) && 
		  (($bw != $S100Kbs) && (($sharks == 0) ||
					 ($nonsharks > 1)))) ||
		 ($loss != 0)) || 
		(defined($mustdelay{$lan})) ||
Christopher Alfeld's avatar
Christopher Alfeld committed
497
498
499
500
501
		(($rdelay >= $delaythresh) ||
		 (($rbw != $S100Kbs) && ($rbw != $S10Kbs))  ||
		 (($delaywithswitch == 0) && 
		  (($rbw != $S100Kbs) && (($sharks == 0) ||
					 ($nonsharks > 1)))) ||
Leigh B. Stoller's avatar
Leigh B. Stoller committed
502
		 ($rloss != 0))) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
503
		$delayname = "tbdelay$delayid";
504
505
		$delaynodes{"linkdelaysrc/$lan/$member"} =
		    [$delay,$bw,$loss,$rdelay,$rbw,$rloss];
Leigh B. Stoller's avatar
Leigh B. Stoller committed
506
507
508
509
		printdb "Delay node linkdelaysrc/$lan/$member ($delayname) " .
		    " = " . join(" ",@{$delaynodes{"linkdelaysrc/$lan/$member"}}) . "\n";
		$delayid++;
		print TOPFILE "node $delayname delay\n";
510
		$delaynodes++;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
511
512
513
514
		print TOPFILE "link linkdelaysrc/$lan/$member" .
		    " $node $delayname $bandwidth\n";
		print TOPFILE "link linkdelaydst/$lan/$member" .
		    " lan/$lan $delayname $bandwidth\n";
515
516
517
518
519
520
521
		#
		# Port is set to 100Mbs when the link gets a delay node.
		# This can override initialization above cause we could not
		# tell earlier if the link was going to get a real delay node
		# or just a delaywithswitch.
		#
		$portbw{$member} = $S100Mbs;	    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
522
523
524
525
526
527
	    } else {
		print TOPFILE "link linklan/$lan/$member $node lan/$lan" .
		    " $bandwidth\n";
	    }
	}
    }
528
    # If a LAN has only one member we don't do anything.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
529
530
}

531
532
533
534
535
# Print out fixed nodes
foreach $fixed (keys(%fixed_nodes)) {
    print TOPFILE "fix-node $fixed $fixed_nodes{$fixed}\n";
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
536
537
close TOPFILE;

538
539
540
# Set estimations
$minimum_nodes = $nodes + $delaynodes/$DELAYCAPACITY;
$maximum_nodes = $nodes + $delaynodes;
541
DBQueryFatal("UPDATE experiments set maximum_nodes=$maximum_nodes, " .
542
543
544
545
	 "minimum_nodes=$minimum_nodes where pid=\"$pid\" and eid=\"$eid\"");
print "Minumum nodes = $minimum_nodes\n";
print "Maximum nodes = $maximum_nodes\n";

Leigh B. Stoller's avatar
Leigh B. Stoller committed
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
######################################################################
# Step 2 - Assign Loop
# 
# Here we loop up to maxrun times.  In each loop we snapshot the
# current testbed state into a ptop file.  We then run assign.  If
# assign succeeds we attempt to reserve the resources.  If that works
# we're done with step 2 otherwise we loop again.
#
# v2pmap is indexed by virtual and contains the physical node.
# p2vmap is indexed by physical and contains the virtual node
# plinks is indexed by virtual name and contains 
#  (pnodeportA,pnodeportB) .  If one is a delay node it is always
#  the second.
#######################################################################

$currentrun = 1;
while (1) {
    print "Assign Run $currentrun\n";

    # Violation counts
566
    $unassigned = -1;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
567
568
569
570
571
572
573
574
575
576
    $linkusers = -1;
    $bandwidth = -1;
    $desires = -1;

    # Clear v2pmap, p2vmap, and plinks
    undef %v2pmap;
    undef %p2vmap;
    undef %plinks;

    # Snapshot
577
    system("ptopgen > $ptopfile");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
578
579

    # Get number of nodes
580
581
    my $numnodes_result = 
	DBQueryFatal("select a.node_id,a.type from" .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
582
583
584
		     " nodes as a left join reserved as b" .
		     " on a.node_id=b.node_id" .
		     " where b.node_id is null" .
585
		     " and a.role='testnode' and a.type!='dnard'");
586
    $numnodes = $numnodes_result->numrows;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
587
588
    
    if ($numnodes < $minimum_nodes) {
589
	print STDERR "$0: *** Insufficient nodes available.\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
590
591
592
593
594
595
	exit(2);
    }

    # Run assign
    $fail = 0;
    print "assign -b -t $ptopfile $topfile\n";
596
    open(ASSIGNFP,"assign -b -t $ptopfile $topfile | tee assign.log |");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
597
598
599
600
601
602
603
604
    $violations = 0;
    $score = -1;

    # read output
    # Header
    printdb "Reading assign results.\n";
    while (<ASSIGNFP>) {
	chop;
605
606
607
608
	/No physical nodes of type (.+)$/ && do {
	    $score=-2;
	    print $_ . "\n";
	};
Leigh B. Stoller's avatar
Leigh B. Stoller committed
609
610
611
612
613
614
	/^With ([0-9]+) violations$/ && do {
	    $violations = $1;
	    last;
	};
	/^[ \t]+BEST SCORE: [ \t]+([0-9]+\.[0-9]+)/ && ($score=$1);
    }
615
616
617
618
619
    if ($score == -2) {
	# Type error
	print "Giving up.\n";
	exit(2);
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
    printdb "Found score $score, violations $violations.\n";

    # We don't bother reading anything else if violations occured.
    if (($violations == 0) && ($score != -1)) {
	# read nodes section
	while (<ASSIGNFP> !~ /^Nodes:/) {}
	printdb "Nodes:\n";
	while (<ASSIGNFP>) {
	    chop;
	    /^End Nodes$/ && last;
	    @info = split;
	    ($virtual,$physical) = @info[0,2];
	    $v2pmap{$virtual} = $physical;
	    $p2vmap{$physical} = $virtual;
	    printdb "  $virtual $physical\n";
	}

	# read Edges
	# By convention, in plinks, the delay node is always the second
	# entry.
	while (<ASSIGNFP> !~ /^Edges:/) {}
	printdb "Edges:\n";
	while (<ASSIGNFP>) {
	    /^End Edges$/ && last;
	    @info = split;
	    $line = $_;
	    $_ = $info[1]; # type
	  SWITCH1: {
	      /^intraswitch$/ && do {
		  ($vlink,$rawA,$rawB) = @info[0,3,5];
		  last SWITCH1;
	      };
	      /^interswitch$/ && do {
653
654
		  ($vlink,$rawA,$rawB) = @info[0,3,$#info];
		  last SWITCH1;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
655
656
	      };
	      /^direct$/ && do {
657
658
		  die("*** $0:\n".
		      "    Unsupported link type: direct.\n");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
659
660
661
	      };
	      print "Found garbage: $line\n";
	  }
662
663
664
665
666
667
668
669
670
	    $nodeportA = &getnodeport($rawA);
	    $nodeportB = &getnodeport($rawB);
	    $nodeportA =~ s/\//:/;
	    $nodeportB =~ s/\//:/;
	    if (&isdelay($nodeportB)) {
		$plinks{$vlink} = [$nodeportA,$nodeportB];
	    } else {
		$plinks{$vlink} = [$nodeportB,$nodeportA];
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
671
672
673
674
675
676
677
678
679
680
	    printdb "  $vlink " . join(" ",@{$plinks{$vlink}}) . "\n";
	}
    } else {
	# spit out up to nodes
	print "ASSIGN FAILED:\n";       
	while (<ASSIGNFP>) {
	    if (/link_users: (\d+)$/) {
		$linkusers = $1;
	    } elsif (/bandwidth: (\d+)$/) {
		$bandwidth = $1;
681
682
	    } elsif (/unassigned: (\d+)$/) {
		$unassigned = $1;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
683
684
685
686
687
688
689
690
691
692
693
694
	    } elsif (/desires: (\d+)$/) {
		$desires = $1;
	    }
	    if (/^Nodes:/) {last;}
	    print "$_";
	}
	$fail = 1;
    }
    while (<ASSIGNFP>) { } # Read anything left in the pipe before closing
    close(ASSIGNFP);

    # Reserve resources
695
    if (!$fail) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
	print "Reserving resources.\n";
	@toreserve = ();
	# We don't reserve LAN nodes.
	foreach $node (keys(%p2vmap)) { 
	    if (! defined($lannodes{$p2vmap{$node}})) {
		push(@toreserve,$node);
	    }
	}
	if (system("nalloc $pid $eid " . join(" ",@toreserve))) {
	    print "Failed to reserve resources.  Trying again.\n";
	} else {
	    print "Successfully reserved resources.  Finishing setup.\n";
	    last;
	}
    }

    # Check for exit
    if ($currentrun >= $maxrun) {
	$exitcode = 1;
	if ($bandwidth > 0) {
	    $exitcode += 4;
	} 
	if ($linkusers > 0) {
	    $exitcode += 8;
	}
	if ($desires > 0) {
	    $exitcode += 16;
	}
724
725
726
	if ($unassigned > 0) {
	    $exitcode += 32;
	}
727
	print "$0: *** Reached run limit.  Giving up.\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
	exit($exitcode);
    }
    $currentrun++;
}


######################################################################
# Step 3 - Convert to vlans, delays, and portmap
# 
# Here we convert the plinks into vlans, delays, and portmap.  We
# convert them first into internal datastructure.  After Step 4
# when we do some port swapping we'll upload the modified versions
# of these structures into the database.
#
# vlans is indexed by an internal ID contains:
#  [vname, members]
# delays is indexed by an internal ID and contains:
#  [pnode, int0, int1, vname, delay, bandwidth, lossrate]
# portmap is indexed by <virtual node>:<virtual port> and contains
#  the physical port.
# nodevlans is indexed by physical node and contains the VLANs
#  it's interfaces are in.  It does not contain entries for delay
#  nodes.
#
# vlan ids
#  vlan ids are increasing integers in the case of node<->delay connections.
#  In the case of actual LANs either of real node or of delay nodes
#  they are indexed by virtual lan name.
# delay ids
#  delay ids are increasing integers.  We could have used a list of
# delays just as well.  Having it as an array may prove useful for
# future changes however.
######################################################################

$vlanid = 0;
$delayid = 0;
foreach $pnode (keys(%p2vmap)) {
    $nodevlans{$pnode} = [];
}

printdb "Interpreting results.\n";
foreach $plink (keys(%plinks)) {
    ($nodeportA,$nodeportB) = @{$plinks{$plink}};
    ($nodeA,$portA) = split(":",$nodeportA);
    ($nodeB,$portB) = split(":",$nodeportB);
    printdb "plink $plink - $nodeportA $nodeportB\n";
    if (($lan) = ($plink =~ m|^linksdelaysrc/(.+)$|)) {
	# Node has a single entry in lan.
	# Node is nodeportA
	# Delay node is nodeportB
	# Other end of delay node will be given by plink
	#   linksdelaydst/lan where nodeportA will be the other node in
	#   the virtual LAN and nodeportB will be the other end of the
	#   delay node.

	($nodeportC,$nodeportD) = @{$plinks{"linksdelaydst/$lan"}};
	($nodeC,$portC) = split(":",$nodeportC);
	($nodeD,$portD) = split(":",$nodeportD);
	printdb "LINK delay: other end = $nodeportC $nodeportD\n";

	# assert nodeB == nodeD

	printdb "  VLANS:\n";
	$vlans{$vlanid} = [$lan,[$nodeportA, $nodeportB]];
	push(@{$nodevlans{$nodeA}},$vlanid);
	printdb "    $vlanid = $lan, \[$nodeportA, $nodeportB\]\n";
	$vlanid++;
	$vlans{$vlanid} = [$lan,[$nodeportC, $nodeportD]];
	push(@{$nodevlans{$nodeC}},$vlanid);
	printdb "    $vlanid = $lan, \[$nodeportC, $nodeportD\]\n";
	$vlanid++;

Christopher Alfeld's avatar
Christopher Alfeld committed
800
801
	($delay,$bandwidth,$lossrate,
	 $rdelay,$rbandwidth,$rlossrate) = @{$delaynodes{$plink}};
Leigh B. Stoller's avatar
Leigh B. Stoller committed
802
	$delays{$delayid} = [$nodeB,$portB,$portD,$lan,
Christopher Alfeld's avatar
Christopher Alfeld committed
803
			     $delay,$bandwidth,$lossrate,
Christopher Alfeld's avatar
Christopher Alfeld committed
804
805
			     $rdelay,$rbandwidth,$rlossrate,
			     $nodeportA,$nodeportC];
Leigh B. Stoller's avatar
Leigh B. Stoller committed
806
	printdb "  Delays: $delayid = \[$nodeB,$portB,$portD,$lan" .
Christopher Alfeld's avatar
Christopher Alfeld committed
807
808
	    ",$delay,$bandwidth,$lossrate,$rdelay,$rbandwidth," .
		"$rlossrate,$nodeportA,$nodeportC\]\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
809
	$delayid++;
Christopher Alfeld's avatar
Christopher Alfeld committed
810
	
Leigh B. Stoller's avatar
Leigh B. Stoller committed
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
	$virtA = &find_vport($p2vmap{$nodeA},$lan);
	$virtC = &find_vport($p2vmap{$nodeC},$lan);
	$portmap{"$p2vmap{$nodeA}:$virtA"} = $portA;
	$portmap{"$p2vmap{$nodeC}:$virtC"} = $portC;
	printdb "  Portmap:\n";
	printdb "    $p2vmap{$nodeA}:$virtA = $portA\n";
	printdb "    $p2vmap{$nodeC}:$virtC = $portC\n";
    } elsif (($lan,$member) = ($plink =~ m|^linkdelaysrc/([^/]+)/(.+)$|)) {
	# Node may have multiple entries in lan.
	# Delay node is nodeB and portB.
	# Other end of delay node will be given by plink
	#  linkdelaydst/lan/node where nodeportA will the LAN node and
	#  nodeportB will be the other end of the delay node.
	($nodeportC,$nodeportD) = @{$plinks{"linkdelaydst/$lan/$member"}};
	($nodeC,$portC) = split(":",$nodeportC);
	($nodeD,$portD) = split(":",$nodeportD);
	printdb "LAN delay src: other end = $nodeportC $nodeportD\n";
	
	$vlans{$vlanid} = [$lan,[$nodeportA, $nodeportB]];
	push(@{$nodevlans{$nodeA}},$vlanid);
	printdb "  VLANS:\n";
	printdb "    $vlanid = $lan, \[$nodeportA $nodeportB\]\n";
	$vlanid++;
	
	if (! defined($vlans{$lan})) {
	    $vlans{$lan} = [$lan,[]];
	}
	$members = (@{$vlans{$lan}})[1];
	push(@$members,$nodeportD);
	printdb "    $lan = $lan, \[" . join(" ",@$members) . "\]\n"; 

Christopher Alfeld's avatar
Christopher Alfeld committed
842
843
	($delay,$bandwidth,$loss,
	 $rdelay,$rbandwidth,$rloss) = @{$delaynodes{$plink}};
Leigh B. Stoller's avatar
Leigh B. Stoller committed
844
	$delays{$delayid} = [$nodeB,$portB,$portD,$lan,
Christopher Alfeld's avatar
Christopher Alfeld committed
845
			     $delay,$bandwidth,$loss,
Christopher Alfeld's avatar
Christopher Alfeld committed
846
847
			     $rdelay,$rbandwidth,$rloss,
                             $nodeportA,$nodeportC];
Leigh B. Stoller's avatar
Leigh B. Stoller committed
848
	printdb "  Delays: $delayid = \[$nodeB,$portB,$portD,$lan," .
Christopher Alfeld's avatar
Christopher Alfeld committed
849
850
	    "$delay,$bandwidth,$loss,$rdelay,$rbandwidth,$rloss," .
             "$nodeportA,$nodeportC\]\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
	$delayid++;
	
	$virt = &find_vport($p2vmap{$nodeA},$lan);
	$portmap{"$p2vmap{$nodeA}:$virt"} = $portA;
	printdb "  Portmap: $p2vmap{$nodeA}:$virt = $portA\n";
    } elsif (($lan) = ($plink =~ m|^linksimple/(.+)$|)) {
	# nodeportA and nodeportB are the only two nodes in the
	# virtual LAN and there are no delays.
	printdb "Simple Link\n";
	$vlans{$lan} = [$lan,[$nodeportA,$nodeportB]];
	printdb "  VLANS: $lan = $lan, \[$nodeportA $nodeportB\]\n";
	
	push(@{$nodevlans{$nodeA}},$lan);
	push(@{$nodevlans{$nodeB}},$lan);
	
	$virtA = &find_vport($p2vmap{$nodeA},$lan);
	$virtB = &find_vport($p2vmap{$nodeB},$lan);
	$portmap{"$p2vmap{$nodeA}:$virtA"} = $portA;
	$portmap{"$p2vmap{$nodeB}:$virtB"} = $portB;
	printdb "  Portmap:\n";
	printdb "    $p2vmap{$nodeA}:$virtA = $portA\n";
	printdb "    $p2vmap{$nodeB}:$virtB = $portB\n";
    } elsif (($lan) = ($plink =~ m|^linklan/([^/]+)/.+$|)) {
	# node may be the LAN multiple times.
	# nodeportA is the node.
	# nodeportB is the LAN
	# No delays
	printdb "LAN\n";
	if (! defined($vlans{$lan})) {
	    $vlans{$lan} = [$lan,[]];
	}
	$members = (@{$vlans{$lan}})[1];
	push(@$members,$nodeportA);
	printdb "  VLANS: $lan = $lan,\[" . join(" ",@$members) . "\]\n";

	$virt = &find_vport($p2vmap{$nodeA},$lan);
	$portmap{"$p2vmap{$nodeA}:$virt"} = $portA;
	printdb "  Portmap: $p2vmap{$nodeA}:$virt = $portA\n";
    }
    # Else delaysrc case, will be handled by one of the other cases.
}

######################################################################
# Step 4 - Upload to DB
#
# Nothing fancy.
######################################################################
printdb "Uploading to DB\n";
foreach $vlan (keys(%vlans)) {
    ($lan,$members) = @{$vlans{$vlan}};
901
    DBQueryFatal("insert into vlans (id,pid,eid,virtual,members) values" .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
902
	     " (0,\"$pid\",\"$eid\",\"$lan\",\"" .
903
	     join(" ",@$members) . "\")");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
904
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
905
906
my $pipeid = 100;

Leigh B. Stoller's avatar
Leigh B. Stoller committed
907
foreach $delay (keys(%delays)) {
Christopher Alfeld's avatar
Christopher Alfeld committed
908
909
    # So r* indicates int1->int0 and others are int0->int1
    ($pnode,$int0,$int1,$vname,$delay,$bandwidth,$lossrate,
Christopher Alfeld's avatar
Christopher Alfeld committed
910
     $rdelay,$rbandwidth,$rlossrate,$np0,$np1) = 
Leigh B. Stoller's avatar
Leigh B. Stoller committed
911
	@{$delays{$delay}};
Leigh B. Stoller's avatar
Leigh B. Stoller committed
912
913
914
    my $pipe0 = $pipeid;
    my $pipe1 = $pipeid + 10;
    $pipeid += 100;
915
916
917
918
919
920
921
922
923

    #
    # Okay, this is terible. If this is link (not a lan) then find the
    # the queue info. We do not support queues in lans yet.
    #
    my @members = @{$lans{$vname}};
    if (@members == 2) {
	my ($nodeport0,$nodeport1) = @members;

Christopher Alfeld's avatar
Christopher Alfeld committed
924
925
926
927
928
929
930
931
	$np0node = (split(":",$np0))[0];
	$np1node = (split(":",$np1))[0];
	$np0vnode = $p2vmap{$np0node};
	$np1vnode = $p2vmap{$np1node};

	$node0 = (split(":",$np0))[0];
	$node1 = (split(":",$np1))[0];

932
933
934
	printdb("np0 = $np0, np0vnode = $np0vnode, np1 = $np1, ".
		"np1vnode = $np1vnode, nodeport0 = $nodeport0, ".
		"nodeport1 = $nodeport1\n");
Christopher Alfeld's avatar
Christopher Alfeld committed
935
936
937
938
939
940
941
942
943
944

	# This is pretty hackish
	if ($node0 eq $np0node) {
	    $vnp0 = $nodeport0;
	    $vnp1 = $nodeport1;
	} else {
	    $vnp0 = $nodeport1;
	    $vnp1 = $nodeport0;
	}

945
946
947
	my ($q0_limit,$q0_maxthresh,$q0_minthresh,$q0_weight,$q0_linterm,
	    $q0_qinbytes,$q0_bytes,$q0_meanpsize,$q0_wait,$q0_setbit,
	    $q0_droptail,$q0_red,$q0_gentle) =
Christopher Alfeld's avatar
Christopher Alfeld committed
948
		@{$queueinfo{"$vname:$vnp0"}};
949
950
951
952

	my ($q1_limit,$q1_maxthresh,$q1_minthresh,$q1_weight,$q1_linterm,
	    $q1_qinbytes,$q1_bytes,$q1_meanpsize,$q1_wait,$q1_setbit,
	    $q1_droptail,$q1_red,$q1_gentle) =
Christopher Alfeld's avatar
Christopher Alfeld committed
953
		          @{$queueinfo{"$vname:$vnp1"}};
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
    
	DBQueryFatal("insert into delays " .
	     " (pid,eid,node_id,vname,iface0,iface1" .
	     ",pipe0,delay0,bandwidth0,lossrate0" .
	     ",pipe1,delay1,bandwidth1,lossrate1" .
	     ",q0_limit,q0_maxthresh,q0_minthresh,q0_weight,q0_linterm" .
	     ",q0_qinbytes,q0_bytes,q0_meanpsize,q0_wait,q0_setbit" .
	     ",q0_droptail,q0_red,q0_gentle" .
	     ",q1_limit,q1_maxthresh,q1_minthresh,q1_weight,q1_linterm" .
	     ",q1_qinbytes,q1_bytes,q1_meanpsize,q1_wait,q1_setbit" .
	     ",q1_droptail,q1_red,q1_gentle)" .
	     " values ('$pid','$eid','$pnode','$vname','$int0','$int1'".
	     ",$pipe0,$delay,$bandwidth,$lossrate".
	     ",$pipe1,$rdelay,$rbandwidth,$rlossrate".
	     ",$q0_limit,$q0_maxthresh,$q0_minthresh,$q0_weight,$q0_linterm".
	     ",$q0_qinbytes,$q0_bytes,$q0_meanpsize,$q0_wait,$q0_setbit".
	     ",$q0_droptail,$q0_red,$q0_gentle".
  	     ",$q1_limit,$q1_maxthresh,$q1_minthresh,$q1_weight,$q1_linterm".
	     ",$q1_qinbytes,$q1_bytes,$q1_meanpsize,$q1_wait,$q1_setbit".
	     ",$q1_droptail,$q1_red,$q1_gentle)");
    }
    else {
	DBQueryFatal("insert into delays" .
	     " (pid,eid,node_id,vname,iface0,iface1" .
	     ",pipe0,delay0,bandwidth0,lossrate0" .
	     ",pipe1,delay1,bandwidth1,lossrate1)" .
	     " values ('$pid','$eid','$pnode','$vname','$int0','$int1'".
	     ",$pipe0,$delay,$bandwidth,$lossrate".
	     ",$pipe1,$rdelay,$rbandwidth,$rlossrate)");
    }
    
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
    #
    # XXX - Whenever a delay node is inserted, port speeds are set to
    #       100Mbs on the delay node ports. This is to ensure that
    #       they get a valid number instead of something left over, but
    #       also because this is a simplification.
    #       At some point we might want to force all the
    #       ports along the way to 10Mbs, and have the delay node worry
    #       about delay only, and not bandwidth. That will be harder to
    #       to do in this mess. See companion XXX above where portbw hash
    #       is set.
    #
    DBQueryFatal("update interfaces set " .
		 "current_speed='$S100Mbs' " .
		 "where node_id='$pnode' and ".
		 "(iface='$int0' or iface='$int1')");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1000
}
1001

Leigh B. Stoller's avatar
Leigh B. Stoller committed
1002
1003
1004
1005
1006
1007
1008
1009
foreach $vnodeport (keys(%portmap)) {
    ($vnode,$vport) = split(":",$vnodeport);
    $pport = $portmap{$vnodeport};
    # Shark Hack
    if ($nodes{$vnode} eq "shark-shelf") {
	$shelf = $v2pmap{$vnode};
	$i = 1;
	foreach $shark (@{$sharkshelves{$vnode}}) {
1010
1011
	    DBQueryFatal("update interfaces set IPalias=\"$ips{$shark}\" " .
		    "where node_id = \"$shelf-$i\"");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1012
1013
1014
	    $i++;
	}
    } else {
1015
1016
	DBQueryFatal("update interfaces set IP=\"$ips{$vnodeport}\" where" .
		 " node_id = \"$v2pmap{$vnode}\" and iface = \"$pport\"");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1017
1018
1019
    }
    # End Shark Hack
}
1020
# Load delay_osids and default osids for types
1021
1022
$result = DBQueryFatal("SELECT type,delay_osid,osid from node_types");
while (($type,$delayosid,$defosid) = $result->fetchrow_array) {
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1023
    $delayosids{$type} = $delayosid;
1024
    $defosids{$type} = $defosid;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1025
}
1026
$result->finish;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
@nodepairs = ();
foreach $pnode (keys(%p2vmap)) {
    if (defined($sharkshelves{$p2vmap{$pnode}})) {
	$i = 1;
	foreach $sharknodeport (@{$sharkshelves{$p2vmap{$pnode}}}) {
	    $shark = (split(":",$sharknodeport))[0];
	    push(@nodepairs,["$pnode-$i",$shark]);
	    $i++;
	}
    } else {
	push(@nodepairs,[$pnode,$p2vmap{$pnode}]);
    }
}
foreach $pair (@nodepairs) {
    ($pnode,$vnode) = @$pair;
1042
1043
1044
    my $result = DBQueryFatal("SELECT osname,cmd_line,rpms,deltas," .
			 " startupcmd,tarfiles,failureaction,routertype " .
			 " from virt_nodes where pid=\"$pid\"" .
1045
			 " and eid=\"$eid\" and vname=\"$vnode\"");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1046
1047
    # The if statement will cause us to skip nodes that belong to
    # the experiment but aren't virtual.  I.e. delay nodes.
1048
    # Figure out type of pnode
1049
    my $result2 = DBQueryFatal("SELECT type from nodes" .
1050
			  " where node_id=\"$pnode\"");
1051
1052
    my ($type) = $result2->fetchrow_array;
    $result2->finish;
1053
    if (($osname,$cmdline,$rpms,$deltas,$startupcmd,$tarfiles,
1054
	 $failureaction,$routertype) = $result->fetchrow_array) {
1055
1056
	my $osid;
	if (!defined($osname) || $osname eq "") {
1057
1058
	    $osid = $defosids{$type};
	}
1059
1060
1061
1062
1063
1064
	#
	# Map the user name into a specific OSID in the project or in
	# the OPS project (a default image). 
	# 
	elsif (! ($osid = TBOSID($pid, $osname)) &&
	       ! ($osid = TBOSID(TB_OPSPID, $osname))) {
1065
1066
	    die("*** $0:\n".
		"    Invalid OS $osname in project $pid!\n");
1067
	}
1068
	DBQueryFatal("UPDATE nodes set def_boot_osid=\"$osid\"," .
1069
1070
1071
		       " def_boot_cmd_line='$cmdline'," .
		       " startstatus='none'," .
		       " bootstatus='unknown'," .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1072
		       " ready=0," .
1073
1074
1075
1076
		       " rpms='$rpms'," .
		       " deltas='$deltas'," .
		       " tarballs='$tarfiles'," .
		       " startupcmd='$startupcmd'," .
1077
1078
		       " failureaction='$failureaction'," .
		       " routertype='$routertype'" .
1079
		       " where node_id='$pnode'");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1080
1081
    } elsif (! defined($lannodes{$p2vmap{$pnode}})) {
	# Delay node
1082
	DBQueryFatal("UPDATE nodes set def_boot_osid=\"" .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1083
1084
		       $delayosids{$type} . "\"," .
		       " startstatus=\"none\"," .
1085
		       " bootstatus=\"unknown\"," .
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1086
		       " ready=0" .
1087
		       " where node_id=\"$pnode\"");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1088
    }
1089
    $result->finish;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1090
1091
1092
}

foreach $pnode (keys(%p2vmap)) {
1093
1094
1095
1096
1097
1098
    $vnode = $p2vmap{$pnode};
    $i = 1;
    if (defined($nodes{$vnode}) && 
	($nodes{$vnode} eq "shark-shelf")) {
	foreach $shark (@{$sharkshelves{$vnode}}) {
	    $vname = (split(":",$shark))[0];
1099
1100
	    DBQueryFatal("update reserved set vname=\"$vname\" where" .
		     " node_id = \"$pnode-$i\"");
1101
1102
1103
	    $i++;
	}
    } else {
1104
1105
	DBQueryFatal("update reserved set vname=\"$vnode\"" .
		 " where node_id = \"$pnode\"");
1106
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1107
1108
}

1109
1110
foreach $vnodeport (keys(%portbw)) {
    ($vnode,$vport) = split(":",$vnodeport);
1111
1112
1113
1114
    # SHARK HACK
    if (defined($v2pmap{$vnode})) {
	$pnode = $v2pmap{$vnode};
	$pport = $portmap{$vnodeport};
1115
1116
1117
	DBQueryFatal("update interfaces set " .
		" current_speed=\"$portbw{$vnodeport}\"" .
		" where node_id=\"$pnode\" and iface=\"$pport\"");
1118
    }
1119
}
1120

1121
1122
1123
#
# Post pass the event list. At present, all LINK operations apply to
# the delay node that is in the middle of it. Rewrite the vnode in
1124
1125
# the event list. This info becomes stale when the experiment is swapped
# out, but thats okay since it gets redone at swapin.
1126
1127
1128
1129
#
$eventlist_result =
    DBQueryFatal("select ex.idx,ex.vname,r.vname ".
		 " from eventlist as ex ".
1130
1131
		 "left join delays as d on ".
		 " ex.vname=d.vname and ex.pid=d.pid and ex.eid=d.eid ".
1132
1133
1134
1135
1136
1137
1138
1139
1140
		 "left join reserved as r on r.node_id=d.node_id ".
		 "left join event_objecttypes as ob on ob.idx=ex.objecttype ".
		 "where ob.type='LINK' and ex.pid='$pid' and ex.eid='$eid'");

while (my ($idx,$vname,$vnode) = $eventlist_result->fetchrow_array) {
    DBQueryFatal("update eventlist set vnode='$vnode' ".
		 "where idx=$idx and pid='$pid' and eid='$eid'");
}

1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
#
# Delay nodes also require that we augment the virt_agents list, since
# that holds the mapping between a link and the node where it is controlled.
# This is for the benefit of the event scheduler and dynamic events, which
# need to map a link name on the fly, instead of from the static list we
# munged above. 
#
foreach $delay (keys(%delays)) {
    ($pnode,undef,undef,$vname) = @{$delays{$delay}};
    $vnode = $p2vmap{$pnode};

    DBQueryFatal("replace into virt_agents ".
		 " (pid, eid, vname, vnode, objecttype) ".
		 " select '$pid', '$eid', '$vname', '$vnode', ".
		 "   idx from event_objecttypes where ".
		 "   event_objecttypes.type='LINK'");
}


1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
######################################################################
# Subroutines
######################################################################

# min(a,b)
# Returns the minimum of a and b.
sub min {
    my ($a,$b) = @_;
    return ($a < $b ? $a : $b);
};

# getbandwidth(bw)
# Returns the lowest ok bandwidth that is greater than or equal to
# the one passed.
sub getbandwidth {
1175
    my $targetbandwidth= BWConvert($_[0]);
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
    my $bandwidth;
    my $best = 10000000000;
    foreach $bandwidth (keys(%okbandwidths)) {
	if (($bandwidth >= $targetbandwidth) && ($bandwidth < $best)) {
	    $best = $bandwidth;
	}
    }
    return $best;
};

# getnodeport(s)
# Takes a ports result from assign (mac0,mac1) and returns the
# first non-null one.
sub getnodeport {
    $macstring=$_[0];
    ($A,$B) = ($macstring =~ /^\(([^,]+),([^,]+)\)$/);
    if ($A ne "(null)") {
	return $A;
    } else {
	return $B;
    }
};

# isdelay(pnodeport)
# Takes a physical nodeport and retruns 1 if the node is a delay node.
sub isdelay {
    my $pnodeport = $_[0];

    my $node = (split(":",$pnodeport))[0];
    if (($p2vmap{$node} =~ m|^delay/|) ||
	($p2vmap{$node} =~ m|^sdelay.|)) {
	return 1;
    } 
    return 0;
};

# find_vport vnode virtlan
# This finds and returns the virtual port of vnode that it is
# virtlan and not in portmap.
sub find_vport {
    my ($vnode,$virtlan) = @_;
    my $portlan;
    my $vport;
    my $lan;
    # Shark Hack
    if ($nodes{$vnode} eq "shark-shelf") {
	return "0";
    }
    # End Shark Hack
    foreach $portlan (@{$nodelans{$vnode}}) {
	($vport,$lan) = split(":",$portlan);
	if (($virtlan eq $lan) &&
	    (! defined($portmap{"$vnode:$vport"}))) {
	    return $vport;
	}
    }
    return "";
};

# keys_equal A B
# Returns 1 if hashs A and B have the same keys.
sub keys_equal {
    my ($ARef,$BRef) = @_;
    my @AKeys = sort keys(%$ARef);
    my @BKeys = sort keys(%$BRef);
    if ($#AKeys != $#BKeys) {
	return 0;
    }
    my $i;
    for ($i=0;$i<=$#AKeys;++$i) {
	if ($AKeys[$i] ne $BKeys[$i]) {
	    return 0;
	}
    }
    return 1;
};

# swapok(pnode,portA,nodeportB)
# This returns 1 if it is ok to swap portA and portB on node pnode
# and 0 otherwise.
sub swapok {
    my ($pnode,$portA,$portB) = @_;
    # For the Utah testbed we just check to make sure they have
    # the same bandwidth.  In other testbeds we'd also want to make
    # sure they went to the same destination.
    my $result = DBQueryFatal("SELECT interface_type FROM interfaces" .
			     " where node_id = \"$pnode\"" .
			     " and iface = \"$portA\"");
    my ($Atype) = $result->fetchrow_array;
    $result->finish;
    $result = DBQueryFatal("SELECT interface_type FROM interfaces" .
			     " where node_id = \"$pnode\"" .
			     " and iface = \"$portB\"");
    my ($Btype) = $result->fetchrow_array;
    $result->finish;

1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
    if ($interfacespeed{$Atype} != $interfacespeed{$Btype}) {
	return 0;
    }

    # It is illegal to swap ports if either is a control interface
    $result = DBQueryFatal("SELECT control_iface FROM nodes" .
    			     " LEFT JOIN node_types ON " .
			     " nodes.type = node_types.type " .
			     " WHERE node_id=\"$pnode\"");
    my ($control_iface) = $result->fetchrow_array;
    $result->finish;

1284
    return (($portA ne $control_iface) && ($portB ne $control_iface));
1285
	
1286
1287
};