tbswap.in 21.9 KB
Newer Older
1 2 3 4
#!/usr/bin/perl -w

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
6 7 8 9
# All rights reserved.
#
use English;

10 11 12
# Returns 0 on success.
# Returns 1 on non-assign_wrapper failure.
# Returns (1 | assign_wrapper's errorcode) on assign_wrapper failure.
13 14
# Returns |0x40 if update caused a swapout. Icky.
# Returns -1 on uncontrolled error (die called).
15

16 17 18 19 20
# XXX: handle error cases for update? (backup the db?)
# XXX: Shouldn't do idempotent stuff twice for update.
# XXX: repush/calc routing for update??? (tbprerun)
# XXX: previz for update???              (tbprerun)
# XXX: make snmpit faster for update.
Chad Barb's avatar
Chad Barb committed
21 22 23
#
# XXX: for update, expt is swapped out on os_setup fail.
#      (we only recover if assign fails)
24 25 26

sub usage()
{
27
    print STDERR "Usage: $0 -force { in | out | update [-reboot] [-eventsys_restart] } pid eid\n";
28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
    exit(-1);
}

#
# Configure variables
#
my $TBROOT         = "@prefix@";
my $TESTMODE       = @TESTMODE@;
my $DISABLE_EVENTS = "@DISABLE_EVENT_SCHED@";

# Untaint the path
$ENV{'PATH'} = "/usr/bin:$TBROOT/libexec:$TBROOT/libexec/ns2ir" . 
    ":$TBROOT/sbin:$TBROOT/bin";

#
# Testbed Support libraries
#
use lib "@prefix@/lib";
use libdb;
use libtestbed;
require exitonwarn; # exitonwarn isn't really a module, so just require it

#
# Actual swap-in and swap-out functions, defined below.
#
53 54 55 56 57 58 59
sub doSwapout($);
sub doSwapin($);

sub REAL()    { return 4; }
sub CLEANUP() { return 3; }
sub RETRY()   { return 2; }
sub UPDATE()  { return 1; }
Chad Barb's avatar
Chad Barb committed
60
sub UPDATE_RECOVER()  { return 0; }
61 62 63 64 65 66 67

#
# Turn off line buffering on output
#

$| = 1;

68 69
my $updateReboot   = 0;
my $updateReconfig = 1;
70
my $updateEventsys_restart = 0;
71 72
my $force  = 0;
my $errors = 0;
73
my $updatehosed = 0;
74
my $state;
75
my $canceled;
76 77
my $os_setup_pid;
my $cleanvlans;
78
my $nextState;
79 80

#
81
# First argument is either "in", "out", or "update";
82 83 84 85 86
# this value goes into $swapop.
#

my $swapop = shift;	

87 88 89 90
if (!$swapop || 
    (($swapop ne "in") && 
     ($swapop ne "out") &&
     ($swapop ne "update"))) {
91 92 93 94 95 96 97 98 99 100 101
    usage();
}

#
# Get other arguments.
#

while ($#ARGV > 1) {
    $arg = shift;
    if ($arg eq "-force") {
	$force = 1;
Chad Barb's avatar
Chad Barb committed
102 103
    } elsif ($arg eq "-reboot") {
	$updateReboot = 1;
104
	$updateReconfig = 0;
105 106
    } elsif ($arg eq "-eventsys_restart" && $swapop eq "update") {
	$update_Eventsys_restart = 1;
107 108 109 110 111 112 113 114 115
    } else {
	usage();
    }
}
if ($#ARGV < 1) {
    usage();
}
my ($pid,$eid) = @ARGV;

116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131
#
# Untaint the arguments.
#
if ($pid =~ /^([-\@\w.]+)$/) {
    $pid = $1;
}
else {
    die("Tainted argument $pid!\n");
}
if ($eid =~ /^([-\@\w.]+)$/) {
    $eid = $1;
}
else {
    die("Tainted argument $eid!\n");
}

132 133 134 135 136 137 138 139 140 141 142 143 144
TBDebugTimeStampsOn();

#
# Print starting message.
#

print "Beginning swap-$swapop for $pid/$eid. " . TBTimeStamp() . "\n";
TBDebugTimeStamp("tbswap $swapop started");

#
# Get experiment state; verify that experiment exists.
#
if (! ($state = ExpState($pid, $eid))) {
145 146
    die("*** $0:\n".
	"    No such experiment $pid/$eid\n");
147
}
148 149 150 151 152 153
# Sanity check the current state. 
if (!$force) {
    if ($swapop eq "in") {
	die("*** $0:\n".
	    "    Experiment should be ACTIVATING. Currently $state.\n")
	    if ($state ne EXPTSTATE_ACTIVATING);
154
    }
155 156 157 158
    elsif ($swapop eq "out") {
	die("*** $0:\n".
	    "    Experiment should be SWAPPING. Currently $state.\n")
	    if ($state ne EXPTSTATE_SWAPPING);
159
    }
160 161 162 163
    elsif ($swapop eq "update") {
	die("*** $0:\n".
	    "    Experiment should be MODIFY_RESWAP. Currently $state.\n")
	    if ($state ne EXPTSTATE_MODIFY_RESWAP);
164 165 166 167 168 169
    }
}

#
# Do actual swapping
#
170 171 172 173 174
if ($swapop eq "out") {
    #
    # Swap out
    #
    $errors = doSwapout(REAL);
175
}
176 177 178 179 180 181 182 183
elsif ($swapop eq "update") {
    #
    # Update.
    #
    # Phase One -- swap experiment partially out.
    #
    print STDERR "Backing up physical state...\n";
    TBExptBackupPhysicalState($pid,$eid);
184

185
    $errors = doSwapout(UPDATE);
Chad Barb's avatar
Chad Barb committed
186

187
    if ($errors) {
188
	#
189 190 191 192 193
	# Clean up the mess, leaving the experiment in the SWAPPED state,
	# 
	print STDERR "Cleaning up after errors.\n";
	doSwapout(CLEANUP);
	$updatehosed = 1;
194
    }
195
    else {
196
	#
197
	# Phase Two -- swap experiment back in.
198
	#
Chad Barb's avatar
Chad Barb committed
199 200
	$errors = doSwapin(UPDATE);

201
	if ($errors) {
Chad Barb's avatar
Chad Barb committed
202 203 204
	    #
	    # There were errors; see if we can recover.
	    #
205
	    my $NoRecover = 0;
Chad Barb's avatar
Chad Barb committed
206 207 208

	    if ($errors != 7) {
		print STDERR "Update failure occurred _after_ assign phase; ";
209
		$NoRecover = 1;
Chad Barb's avatar
Chad Barb committed
210 211
	    }

212 213 214
	    if (! $NoRecover) {
		print STDERR "Recovering physical state.\n";
		if (($NoRecover = TBExptRestorePhysicalState($pid,$eid))) {
Chad Barb's avatar
Chad Barb committed
215 216 217
		    print STDERR "Could not restore backed-up physical state; ";
		}
	    }
218 219 220
	    if (! $NoRecover) {
		print STDERR "Doing a recovery swap-in of old state.\n";
		if (($NoRecover = doSwapin(UPDATE_RECOVER))) {
Chad Barb's avatar
Chad Barb committed
221 222 223
		    print STDERR "Could not swap in old physical state; ";
		}
	    }
224 225
	    if ($NoRecover) {
		print STDERR "Recovery aborted! Swapping experiment out.\n";
Chad Barb's avatar
Chad Barb committed
226
		doSwapout(CLEANUP);
227 228 229 230
		$updatehosed = 1;
	    }
	    else {
		print STDERR "Update recovery successful.\n";
Chad Barb's avatar
Chad Barb committed
231
	    }
232
	}
Chad Barb's avatar
Chad Barb committed
233 234
    }
}
235 236 237 238 239 240 241
elsif ($swapop eq "in") {
    #
    # Swap in
    #
    my $retries = 2;
    
    $errors = doSwapin(REAL);
Chad Barb's avatar
Chad Barb committed
242

243 244 245 246 247 248 249 250 251 252
    #
    # Attempt a retry if: 
    #   a) there were errors, 
    #   b) doswapin() indicated (via return code 3) a retry is appropriate,
    #   c) we haven't tried too many times already.
    #   d) The cancelflag has not been set.
    #   e) $TESTMODE == 0.
    #
    while ($errors == 3 && $retries && !$canceled && !$TESTMODE) {
	$retries--;
253

254 255
	print STDERR "Cleaning up after errors; will try again.\n";
	doSwapout(RETRY);
256

257 258
	print STDERR "Trying again...\n";
	$errors = doSwapin(RETRY);
259
    }
260 261 262 263
    if ($errors || $canceled) {
	print STDERR "Cleaning up after " .
	    ($errors ? "errors" : "cancelation") . ".\n";
	doSwapout(CLEANUP);
264 265 266 267 268 269 270
    }
}

#
# Write appropriate message and exit.
#
if ($errors) {
271
    print "Failingly finished swap-$swapop for $pid/$eid. ".TBTimeStamp()."\n";
272
    TBDebugTimeStamp("tbswap $swapop finished (failed)");
Chad Barb's avatar
Chad Barb committed
273

274 275
    # Pass out magic value to indicate that update failed!
    exit(1 | ($updatehosed ? 0x40 : 0));
276
}
277
print "Successfully finished swap-$swapop for $pid/$eid. " .TBTimeStamp()."\n";
278 279
TBDebugTimeStamp("tbswap $swapop finished (succeeded)");
exit(0);
280 281 282 283

#################################

##
Chad Barb's avatar
Chad Barb committed
284
#
285 286
# doSwapout - Swaps experiment out.
#
Chad Barb's avatar
Chad Barb committed
287
#             If in REAL or CLEANUP,
288 289 290
#             this function will free all nodes for the 
#             experiment.
#
Chad Barb's avatar
Chad Barb committed
291
#             If in RETRY or UDPATE,
292 293 294 295 296 297
#             only nodes not in RES_READY will be freed.
#
#             Returns 0 on success, >0 on failure.
#
##

298 299
sub doSwapout($) {
    my $type = shift; # REAL==4, CLEANUP==3, RETRY==2, UPDATE==1.
300 301 302 303 304 305 306 307 308 309 310
    my $swapout_errors = 0;

    #
    # wait for os_setup;
    # this only applies if called after a failed doswapin.
    #
    if ($os_setup_pid) {
	print "Waiting for os_setup to finish\n";
	waitpid($os_setup_pid, 0);
	undef $os_setup_pid;
    }
Chad Barb's avatar
Chad Barb committed
311

312 313
    if (! $TESTMODE) { 
	if (! $DISABLE_EVENTS) {
314
	    if ($type >= RETRY || ($update_Eventsys_restart && $type == UPDATE) ) {
315 316 317 318 319
		print "Stopping the event system\n";
		if (system("eventsys_control stop $pid $eid")) {
		    print STDERR "*** Failed to stop the event system.\n";
		    $swapout_errors = 1;
		}
320 321
	    }
	}
Chad Barb's avatar
Chad Barb committed
322

323
	#
Chad Barb's avatar
Chad Barb committed
324
	# Clean up any VLANs in experiment.
325
	#
Chad Barb's avatar
Chad Barb committed
326 327 328 329 330 331 332
	TBDebugTimeStamp("snmpit started");
	print STDERR "Removing VLANs.\n";
	if (system("snmpit -r $pid $eid")) {
	    print STDERR "*** Failed to reset VLANs\n";
	    $swapout_errors = 1;
	} else {
	    $cleanvlans = 0;
333
	}
Chad Barb's avatar
Chad Barb committed
334
	TBDebugTimeStamp("snmpit finished");
335
    }
Chad Barb's avatar
Chad Barb committed
336

337 338 339
    if ($type >= CLEANUP) {
	#
	# We're not attempting a retry;
340
	#
341
	# Stop all of the vnodes.
342
	#
343
	if (! $TESTMODE) { 	
344 345 346 347 348 349 350
	    print "Tearing down virtual nodes.\n";
	    TBDebugTimeStamp("vnode_setup -k started");
	    if (system("vnode_setup -d -k $pid $eid")) {
		print STDERR "*** Failed to tear down vnodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("vnode_setup finished");
351 352 353 354
	}

	#
	# remove all nodes from the experiment.
Chad Barb's avatar
Chad Barb committed
355
	# (nfree will send them to RES_FREE_DIRTY)
356 357 358 359 360 361 362 363
	#
	print STDERR "Freeing nodes.\n";
	TBDebugTimeStamp("nfree started");
	if (system("nfree $pid $eid")) {
	    print STDERR "*** Could not free nodes.\n";
	    $swapout_errors = 1;
	}
	TBDebugTimeStamp("nfree finished");
364 365 366 367 368

	#
	# Since this is an actual swapout, 
	# reset our count of swap out nag emails sent.
	#
369
	DBQueryWarn("update experiments set swap_requests='',sim_reswap_count='0' ".
370
		    "where eid='$eid' and pid='$pid'");
371 372
    } else {
	#
373
	# $type == RETRY or $type == UPDATE.
374 375
	# Therefore, don't deallocate nodes which have been successfully
	# incorporated into the experiment (i.e., are RES_READY).
Chad Barb's avatar
Chad Barb committed
376
	# (nfree will send deallocated nodes to RES_FREE_DIRTY)
377
	#
378 379 380 381 382 383 384 385
	my @failedpnodes = ();
	my @failedvnodes = ();
	
	my $db_result =
	    DBQueryFatal("select rv.node_id,n.allocstate,nt.isvirtnode ".
                         "  from reserved as rv ".
			 "left join nodes as n on n.node_id = rv.node_id ".
			 "left join node_types as nt on nt.type=n.type ".
386 387
			 "where rv.pid='$pid' and rv.eid='$eid'");

388
	while (my ($node,$allocstate,$isvirt) = $db_result->fetchrow_array) {
389
	    if ($allocstate ne TBDB_ALLOCSTATE_RES_READY()) {
390 391 392 393 394 395
		if ($isvirt) {
		    push(@failedvnodes, $node);
		}
		else {
		    push(@failedpnodes, $node);
		}
396 397 398
	    }
	}

399 400 401 402 403 404 405 406 407 408 409 410
	#
	# Tear down failed vnodes. Perhaps not needed?
	# 
	if (!$TESTMODE && @failedvnodes > 0) {
	    print "Tearing down failed virtual nodes.\n";
	    TBDebugTimeStamp("vnode_setup -k started");
	    if (system("vnode_setup -d -k $pid $eid @failedvnodes")) {
		print STDERR "*** Failed to tear down vnodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("vnode_setup -k finished");
	}
411

412 413 414 415
	#
	# Release all failed nodes.
	# 
	if (@failedpnodes > 0 || @failedvnodes > 0) {
416 417
	    print STDERR "Freeing failed nodes.\n";
	    
418
	    TBDebugTimeStamp("nfree started");
Chad Barb's avatar
Chad Barb committed
419 420 421 422 423
	    #
	    # Specify -x switch so when a physical node gets freed,
	    # any virtual nodes (owned by this experiment)
	    # sitting on top of it are freed as well.
	    #
424 425
	    if (system("nfree -x $pid $eid " .
		       join(" ", (@failedpnodes, @failedvnodes)))) {
426 427 428 429 430 431 432
		print STDERR "*** Could not free nodes.\n";
		$swapout_errors = 1;
	    }
	    TBDebugTimeStamp("nfree finished");
	}
    }

433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456
    if (! $TESTMODE) {
	#
	# If the experiment has no Plab dslice nodes left, but still has
	# a Plab slice, destroy the slice
	#

	# Does the slice exist?
	$db_result =
	    DBQueryFatal("select slicename from plab_slices ".
			 "where pid='$pid' and eid='$eid'");

	if ($db_result->numrows) {
	    # Are there any dslice nodes left?
	    $db_result =
		DBQueryFatal("select n.node_id from nodes as n ".
			     "left join node_types as nt on n.type = nt.type ".
			     "left join reserved as r ".
			     " on r.node_id = n.node_id ".
			     "where r.pid='$pid' and r.eid='$eid' ".
			     " and nt.isplabdslice = 1");

	    if (!$db_result->numrows) {
		print "Destroying Planetlab slice.\n";
		TBDebugTimeStamp("plabslice destroy started");
457
		if (system("plabslice destroy $pid $eid")) {
458 459 460 461 462 463 464 465
		    print STDERR "*** Failed to destroy Plab dslice\n";
		    $swapout_errors = 1;
		}
		TBDebugTimeStamp("plabslice destroy finished");
	    }
	}
    }

466 467 468 469 470 471 472 473
    if (! $TESTMODE) {
	#
	# All of these errors are non-fatal on swapout. We find out about them
	# via email sent from the individual scripts.
	#

	#
	# Only reset mountpoints if this is an actual swapout, and
474
	# not a failed swapin(cleanup), update, or retry.
475
	#
476
	if ($type == REAL) {
477 478 479 480 481 482 483
	    print "Resetting mountpoints.\n";
	    TBDebugTimeStamp("exports started");
	    if (system("exports_setup")) {
		print STDERR "*** Failed to reset mountpoints.\n";
	    }
	    TBDebugTimeStamp("exports finished");
	}
Chad Barb's avatar
Chad Barb committed
484

485 486 487 488
	#
	# Resetting named maps and email lists is fast and idempotent,
	# so whatever.
	#
489 490 491 492 493 494
	print "Resetting named maps.\n";
	TBDebugTimeStamp("named started");
	if (system("named_setup")) {
	    print "*** WARNING: Failed to reset named map.\n";
	}
	TBDebugTimeStamp("named finished");
Chad Barb's avatar
Chad Barb committed
495

496 497 498 499 500 501 502 503
	print "Resetting email lists.\n";
	TBDebugTimeStamp("genelists started");
	if (system("genelists")) {
	    print "*** WARNING: Failed to reset email lists.\n";
	}
	TBDebugTimeStamp("genelists finished");
    }

504
    #
505 506 507
    # Wipe the DB clean except during UPDATE or RETRY. In those
    #    cases, assign_wrapper will reset the DB after reading
    #    the info.
508
    #
509 510 511 512
    if ( $type >= CLEANUP ) {
	print STDERR "Resetting DB.\n";
	TBExptRemovePhysicalState( $pid, $eid );
    }
513 514 515 516 517

    return $swapout_errors;
}

##
Chad Barb's avatar
Chad Barb committed
518
#
519 520
# doSwapin - Swaps experiment in.
#
Chad Barb's avatar
Chad Barb committed
521 522 523 524 525
#            Returns:
#              0 - successful swapin
#              1 - failed swapin; cleanup required.
#              3 - failed swapin; cleanup required; can retry.
#              7 - failed swapin; assign failed; no cleanup.
526 527
##

528
sub doSwapin($) {
Chad Barb's avatar
Chad Barb committed
529
    my $type = shift; # REAL==4, RETRY==2, UPDATE==1, UPDATE_RECOVER=0. 
530

531 532 533 534 535
    #
    # assign_wrapper does all the virtual to physical mapping 
    # and updating the DB state.
    #

Chad Barb's avatar
Chad Barb committed
536 537 538 539 540
    if ($type > UPDATE_RECOVER) {
	print "Mapping to physical reality ...\n";
	TBDebugTimeStamp("assign_wrapper started");

	#
541 542 543 544
	# Pass the -u (update) switch into assign_wrapper, which turns on
	# update mode. When doing a retry, must also fix the current nodes
	# to avoid stuff jumping around when simply trying to replace a node
	# that did not boot.
Chad Barb's avatar
Chad Barb committed
545 546
	#
	my $exitcode;
547 548 549
	my $wrapper = "assign_wrapper -u";
	$wrapper .= " -f"
	    if ($type == RETRY);
550
	
551
	if (system("$wrapper $pid $eid")) {
552 553 554 555
	    $exitcode = $? >> 8;

	    print STDERR "*** Failed ($exitcode) to map to reality.\n";

556 557
	    # Wrapper sets this bit when recovery is possible.
	    if ($exitcode & 64) {
558
		# We can recover. 
Chad Barb's avatar
Chad Barb committed
559
		return 7;
560 561
	    }
	    else {
562
		# No recovery, no retry.
Chad Barb's avatar
Chad Barb committed
563 564 565 566
		return 1;
	    }
	}
	TBDebugTimeStamp("assign_wrapper finished");
567

Chad Barb's avatar
Chad Barb committed
568 569
	print "Mapped to physical reality!\n";
    }
570

571
    # Check cancel flag before continuing. No retry, 
572
    TBGetCancelFlag($pid, $eid, \$canceled);
573 574 575
    return 1
	if ($canceled);

576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613
    #
    # Look for any nodes in RES_TEARDOWN. These need to be released,
    # and if a virtnode, they need to be torn down. We cannot wait for
    # the virtnodes to go down with the physnode they are hosted on,
    # so teardown and release the virtnodes first, and then do the
    # physnodes.
    #
    # Errors are fatal; no recovery or retry.
    #
    if ($type == UPDATE) {
	my $allocstate = TBDB_ALLOCSTATE_RES_TEARDOWN();
	
	$db_result =
	    DBQueryFatal("select r.node_id,nt.isvirtnode,nt.isremotenode ".
			 "  from reserved as r ".
			 "left join nodes as n on n.node_id=r.node_id ".
			 "left join node_types as nt on nt.type=n.type ".
			 "where r.pid='$pid' and r.eid='$eid' and ".
			 "      n.allocstate='$allocstate'");

	if ($db_result->numrows) {
	    my @virtnodes = ();
	    my @physnodes = ();
	    
	    print "Tearing down and releasing unused nodes\n";

	    # First teardown/release virtnodes. 
	    while (my ($node,$isvirt,$isrem) = $db_result->fetchrow_array()) {
		if ($isvirt) {
		    push(@virtnodes, $node);
		}
		elsif (!$isrem) {
		    push(@physnodes, $node);
		}
	    }
	    if (@virtnodes) {
		TBDebugTimeStamp("vnode_setup started");
		
614
		if (system("vnode_setup -k $pid $eid @virtnodes")) {
615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633
		    print "Failed to tear down unused virtnodes!\n";
		    return 1;
		}
		TBDebugTimeStamp("vnode_setup finished");
		
		if (system("nfree $pid $eid @virtnodes")) {
		    print "Failed to nfree unused virtnodes!\n";
		    return 1;
		}
	    }
	    if (@physnodes) {
		if (system("nfree $pid $eid @physnodes")) {
		    print "Failed to nfree unused physnodes!\n";
		    return 1;
		}
	    }
	}
    }

634 635 636 637 638 639
    # Exit here if we are testing.
    if ($TESTMODE) {
	print "Testing run - Stopping here.\n";
	return 0;
    }

640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655
    #
    # Handle tarballs - we might need to fetch some from URLs if the user
    # asked for that.
    #
    print "Fetching tarballs and RPMs (if any) ...\n";
    TBDebugTimeStamp("tarfiles_setup started");

    if (system("tarfiles_setup $pid $eid")) {
	#
	# No recovery for now - what would we do?
	#
	print STDERR "*** Failed to set up tarballs.\n";
	return 1;
    }
    TBDebugTimeStamp("tarfiles_setup finished");

656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683
    #
    # If there are any Plab dslice nodes in the experiment, create the
    # dslice now
    #
    if ($type > UPDATE_RECOVER) {
	# Are there any Plab nodes?
	$db_result =
	    DBQueryFatal("select n.node_id from nodes as n ".
			 "left join node_types as nt on n.type = nt.type ".
			 "left join reserved as r on r.node_id = n.node_id ".
			 "where r.pid='$pid' and r.eid='$eid' ".
			 " and nt.isplabdslice = 1");

	if ($db_result->numrows) {
	    # Does slice already exist?
	    $db_result =
		DBQueryFatal("select slicename from plab_slices ".
			     "where pid='$pid' and eid='$eid'");

	    if (! $db_result->numrows) {
		my @plabnodes = ();
		
		while (my ($node) = $db_result->fetchrow_array()) {
		    push(@plabnodes, $node);
		}
		
		print "Creating Planetlab slice.\n";
		TBDebugTimeStamp("plabslice create started");
684
		if (system("plabslice create $pid $eid")) {
685 686 687 688 689 690 691 692
		    print STDERR "*** Failed to create Plab dslice\n";
		    return 3;
		}
		TBDebugTimeStamp("plabslice alloc finished");
	    }
	}
    }

693
    # Check cancel flag before continuing. No retry, 
694
    TBGetCancelFlag($pid, $eid, \$canceled);
695 696 697
    return 1
	if ($canceled);

698 699 700 701 702 703 704 705 706 707 708 709 710
    #
    # These things need to get started before the nodes come up, so we'll
    # do them before the os_setup. Everything else can done in parallel with
    # os_setup. (Actually, these probably can too, since they should finish
    # long before the nodes reboot, but better safe than sorry)
    #
    print "Setting up mountpoints.\n";
    TBDebugTimeStamp("mountpoints started");
    if (system("exports_setup")) {
	print STDERR "*** Failed to setup mountpoints.\n";
	return 1;
    }
    TBDebugTimeStamp("mountpoints finished");
Chad Barb's avatar
Chad Barb committed
711

712 713 714 715 716 717
    TBDebugTimeStamp("named started");
    print "Setting up named maps.\n";
    if (system("named_setup")) {
	print STDERR "*** WARNING: Failed to add node names to named map.\n";
	#
	# This is a non-fatal error.
Chad Barb's avatar
Chad Barb committed
718
	#
719 720
    }
    TBDebugTimeStamp("named finished");
Chad Barb's avatar
Chad Barb committed
721

722
    # Check cancel flag before continuing. No retry, 
723
    TBGetCancelFlag($pid, $eid, \$canceled);
724 725
    return 1
	if ($canceled);
Chad Barb's avatar
Chad Barb committed
726 727 728

    #
    # If user specified -reboot to update,
729
    # and we are successfully performing the update,
730
    # then mark all nodes in experiment so os_setup will reboot them.
Chad Barb's avatar
Chad Barb committed
731
    #
732 733 734
    if (($type == UPDATE) &&
	($updateReboot || $updateReconfig)) {
	print STDERR "Marking nodes for reboot/reconfig.\n";
Chad Barb's avatar
Chad Barb committed
735
	$db_result =
736 737 738
	    DBQueryFatal("select r.node_id,n.allocstate from reserved as r ".
			 "left join nodes as n on n.node_id=r.node_id ".
			 "where r.pid='$pid' and r.eid='$eid'");
Chad Barb's avatar
Chad Barb committed
739

740 741 742 743 744 745 746 747
	while (my ($node,$allocstate) = $db_result->fetchrow_array) {
	    #
	    # If the node is INIT_CLEAN, leave it alone. It will still get
	    # rebooted, but will not falsely be tagged as dirty. This is
	    # important for vnodes too, where INIT_CLEAN indicated the vnode
	    # does not even exist yet (plab nodes).
	    #
	    if ($allocstate ne TBDB_ALLOCSTATE_RES_INIT_CLEAN()) {
748 749 750 751
		TBSetNodeAllocState($node,
				    ($updateReboot ?
				     TBDB_ALLOCSTATE_RES_INIT_DIRTY() :
				     TBDB_ALLOCSTATE_RES_RECONFIG()));
752
	    }
Chad Barb's avatar
Chad Barb committed
753 754 755
	}
    }

756 757 758 759 760 761 762 763 764 765 766 767
    #
    # Since it'll take a while for the nodes to reboot, we'll start now, and
    # wait for the os_setup to finish, down below
    #
    print "Resetting OS and rebooting.\n";
    TBDebugTimeStamp("os_setup started");
    if (!($os_setup_pid = fork())) { 
	exec("os_setup $pid $eid") or return 1;
    } elsif ($os_setup_pid == -1) {
	print STDERR "*** Fork failed.\n";
	return 1;
    }
Chad Barb's avatar
Chad Barb committed
768

769
    #
770 771 772 773 774
    # XXX
    # Don't add any steps between here and the waitpid() call below
    # without verifying that 1) It's OK for nodes to come up before
    # the step has completed and 2) It's OK for the command to run in
    # parallel with os_setup (no DB dependencies, etc.)
775 776 777 778 779 780 781 782 783
    #

    print "Setting up VLANs.\n";
    TBDebugTimeStamp("snmpit started");
    if (system("snmpit -t $pid $eid")) {
	print STDERR "*** Failed to set up VLANs.\n";
	return 1;
    }
    TBDebugTimeStamp("snmpit finished");
Chad Barb's avatar
Chad Barb committed
784

785 786 787 788
    #
    # An error now means that the VLANS need to be cleaned up.
    #
    $cleanvlans = 1;
Chad Barb's avatar
Chad Barb committed
789

790 791 792 793 794 795 796 797 798
    print "Setting up email lists.\n";
    TBDebugTimeStamp("genelists started");
    if (system("genelists")) {
	print STDERR "*** WARNING: Failed to update email lists.\n";
	#
	# This is a non-fatal error.
	# 
    }
    TBDebugTimeStamp("genelists finished");
Chad Barb's avatar
Chad Barb committed
799

800 801 802 803 804 805 806 807 808 809 810 811 812 813
    #
    # Don't clear port counters on UPDATE.
    # (XXX should clear new nodes' port counters.)

    if ($type >= RETRY) {
	print "Clearing port counters.\n";
	TBDebugTimeStamp("portstats started");
	if (system("portstats -z -a -q $pid $eid")) {
	    print STDERR "*** WARNING: Failed to clear port counters.\n";
	    #
	    # This is a non-fatal error.
	    # 
	}
	TBDebugTimeStamp("portstats finished");
814
    }
Chad Barb's avatar
Chad Barb committed
815

816 817 818 819 820 821 822 823 824
    #
    # OK, let's see how that os_setup did
    #
    $kid = waitpid($os_setup_pid,0);
    if ($kid == $os_setup_pid) {
	undef $os_setup_pid; # Make sure doswapout() doesn't wait for it.
	if ($CHILD_ERROR) {
	    print STDERR "*** Failed to reset OS and reboot nodes.\n";
	    #
825 826
	    # Use returncode from os_setup process to
	    # set global $retry flag, indicating to caller
827 828 829
	    # that it may be beneficial to attempt
	    # a doSwapin() again.
	    #
830
            if (($CHILD_ERROR >> 8) == 1) {
Chad Barb's avatar
Chad Barb committed
831
		return 3;
832 833
	    } else {
		print STDERR "Not retrying due to error type.\n";
Chad Barb's avatar
Chad Barb committed
834
		return 1;
835
	    }
836 837 838 839 840 841 842
	}
    } else {
	undef $os_setup_pid;
	print STDERR "*** Error waiting for os_setup to finish.\n";
	return 1;
    }
    TBDebugTimeStamp("os_setup finished");
Chad Barb's avatar
Chad Barb committed
843

844 845 846 847
    #
    # Okay, start the event system now that we know all the nodes have
    # rebooted (os_setup is done). This only takes a moment (puts itself
    # in the background), so its not enough of a delay to worry about.
848 849
    # Don't do this during an update, since we didn't kill the 
    # event system previously, so starting it again will fail!
850 851
    # 
    if (! $DISABLE_EVENTS) {
852 853
	if ( $update_Eventsys_restart || 
	    ($type != UPDATE && $type != UPDATE_RECOVER) ) {
854 855 856 857 858 859 860
	    print "Starting the event system.\n";
	    TBDebugTimeStamp("eventsys_control started");
	    if (system("eventsys_control start $pid $eid")) {
		print STDERR "*** Failed to start the event system.\n";
		return 1;
	    }
	    TBDebugTimeStamp("eventsys_control finished");
861 862
	}
    }
Chad Barb's avatar
Chad Barb committed
863

864 865
    return 0;
}