ptopgen.in 18.4 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2003 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12 13
sub usage()
{
14 15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor]\n" .
	  "       -p include nodes the project has permission to use\n".
16
	  "       -e include given experiments resources\n" .
17 18
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
19
	  "       -r Include stuff for topologies with widearea nodes\n".
20
	  "       -s Include stuff for topologies with simulated nodes\n".
21
	  "       -m Override multiplex_factor\n");
22 23
    exit(-1);
}
24
my $optlist = "s:e:m:vp:rS";
25
my $mfactor;
26
my $virtstuff = 0;
27
my $widearea  = 0;
28
my $simstuff  = 0;
29

30 31 32 33
#
# Turn off line buffering on output
#
$| = 1;
34 35 36 37 38 39 40 41 42 43 44 45

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

46 47 48 49 50 51
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

52 53
######################################################################

54
my $TBROOT = "@prefix@";
55
use lib '@prefix@/lib';
56
require exitonwarn;
57
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
58

59 60
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

61 62 63
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
64 65
my %typemap       = ();
my %auxtypemap    = ();
66

67 68 69
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

70
my $pid;
71
my $exempt_eid;
72
my $switchtouse;
73

74 75 76 77 78 79 80 81 82 83 84 85 86 87
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
88 89 90
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
91 92 93
if (defined($options{"v"})) {
    $virtstuff = 1;
}
94 95 96
if (defined($options{"r"})) {
    $widearea = 1;
}
97 98 99
if (defined($options{"S"})) {
    $simstuff = 1;
}
100 101 102
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
103
if (defined($options{"e"})) {
104 105 106
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
107 108
}

109
# Read class/type maps
110
my $result =
111
    DBQueryFatal("select class,type,delay_capacity,".
112 113
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
		 "   speed, RAM ".
114
		 "from node_types");
115
while (($class,$type,$delaycapacity,
116 117
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram)
	    = $result->fetchrow_array) {
118 119 120 121
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
122
    $map->{'SIMCAP'}   = $simcapacity;
123
    $map->{'ISVIRT'}   = $isvirt;
124 125
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
126 127 128
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
129 130 131 132 133 134 135 136 137 138 139

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
140 141 142 143 144 145 146 147 148 149
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
150 151
}

152 153 154 155 156 157 158 159 160 161 162 163
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
164 165 166 167 168 169 170 171 172
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
173
    push @{$auxtypes{$node_id}}, "$type:$count";
174
}
175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
195 196
}

197
# Print switches
198
if (defined($switchtouse)) {
199
    print "node $switchtouse switch:1 *lan:*\n";
200 201 202 203 204 205 206
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
207
	print "node $switch switch:1 *lan:*\n";
208 209
	$switches{$switch} = 1;
    }
210
}
211

212
# Find available nodes.
213
#
214 215
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
216
#
217

218
# the ordinary free condition for a local node.
219 220 221
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "')) ";
222 223 224 225 226

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
227
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
228
}
Chad Barb's avatar
Chad Barb committed
229

230
$result =
231
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
232 233
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
234 235
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
236
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
237
		 "left join node_types as t on t.type=a.type ".
238
		 "where $free_condition and ".
239
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
240

241 242 243
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
244 245 246
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
247
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
248
    = $result->fetchrow_array) {
249 250 251
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
252 253 254
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
255
    $node_def_boot_osid{$node} = $def_boot_osid;
256 257 258 259 260 261

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
262
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
263 264

foreach $node (keys(%nodes)) {
265 266 267
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
268
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
269 270
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
271
    
272
    my @types = ("$type:1");
273 274
    my @features;
    my @flags;
275
    my $needvirtgoo = 0;
276

277 278 279 280 281 282 283 284 285 286
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

287
    # Might be equal, which assign would sum as two, not one!
288 289
    if ($type ne $class) {
	push(@types, "$class:1");
290 291
    }

292
    if ($delay_capacity > 0) {
293
	push @types, "delay:$delay_capacity";
294
    }
295

296 297 298
    #
    # Add any auxiliary types
    #
299 300 301
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
302

303 304 305
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
306 307
	}
	else {
308
	    $realtype = $auxtype;
309
	}
310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
330
	push @types, "*lan:*";
331
	# Add trivial bw spec.
332
	push @flags, "trivial_bw:400000";
333 334 335 336 337
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
338 339 340
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
341 342
    }

343 344 345 346 347 348 349 350 351 352
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
353 354 355
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
356 357 358 359 360
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }

361
    # Add features
362
    push(@features, @{$typemap{$type}->{'FEATURES'}});
363 364
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
365 366
    }

367 368 369 370 371 372
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
    if ($exempt_eid && $is_reserved{$node}) {
	push(@features,"already_reserved:0");
    }

373 374 375 376 377 378 379 380 381 382 383
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
384
	}
385 386
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
387
    }
388 389 390 391 392

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


393
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
394 395
}

396 397 398 399 400 401 402 403 404 405 406
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
407 408 409 410
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
411 412
if ($widearea) {
    $result =
413
	DBQueryFatal("select count(a.node_id),a.phys_nodeid,aa.type, ".
414
		     "  ns.status, wn.site ".
415 416 417 418 419 420 421
		     "  from nodes as a ".
 		     "left join reserved as b on a.node_id=b.node_id ".
		     "left join nodes as aa on aa.node_id=a.phys_nodeid ".
		     "left join reserved as m on a.phys_nodeid=m.node_id ".
		     "left join node_status as ns on ".
		     "     a.phys_nodeid=ns.node_id ".
		     "left join node_types as t on t.type=a.type ".
422 423
		     "left join widearea_nodeinfo as wn on ".
		     "     wn.node_id=a.phys_nodeid ".
424 425 426 427 428
		     "where  (a.role='virtnode' and t.isremotenode=1 and ".
		     "        (b.node_id is null and ".
		     "         !(m.pid='$DEADPID' and m.eid='$DEADEID'))) ".
		     "group by a.phys_nodeid");
    
429
    while (($count,$physnode,$ptype,$status,$site)
430
	    = $result->fetchrow_array) {
431
	my $class = $typemap{$ptype}->{'CLASS'};
432 433 434 435
	my @types;
	my @features;
	my @flags;

436 437 438 439 440
	# capacity is smaller of mfactor, number of unallocated virtual node
	# and the per-auxtype capacity below.
	my $virtnode_capacity = $count;
	if (defined($mfactor) && $mfactor <= $virtnode_capacity) {
	    $virtnode_capacity = $mfactor;
441 442
	}

443 444 445 446 447 448 449 450 451
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
	if ($status && ($status ne 'up')) {
	    push @features, "down:1";
	}

452 453 454 455 456 457 458
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

459 460 461
	#
	# Add any auxiliary types.
	#
462 463
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
464

465 466
	    if ($count > $virtnode_capacity) {
		$auxinfo = "$auxtype:$virtnode_capacity";
467
	    }
468 469

	    push(@types, $auxinfo);
470 471 472 473 474
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

475 476 477
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

478
	# Add features
479
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
480 481
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
482 483 484 485 486 487 488 489 490 491
	}

	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

492
# Read interfaces
493
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
494
		     " from interfaces");
495
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
496
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
 
Chad Barb committed
497
    if ((defined $type) && ($type ne "")) {
498 499 500 501 502
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

# Read interface types
503 504
$result = DBQueryFatal("SELECT type,max_speed from interface_types");
while (($type,$speed) = $result->fetchrow_array) {
505 506 507
    $interfacespeeds{$type} = $speed;
}

508 509 510 511 512 513 514 515 516 517 518 519 520 521 522
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
$result = DBQueryFatal("SELECT node_id, iface, card, port FROM interfaces");
while (($node,$iface,$card,$port) = $result->fetchrow_array) {
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

523
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
524
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
525
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
526
       $result->fetchrow_array) {
527
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
528
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
529 530 531 532
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
	$iface1bw = get_ifacebw($node1,$card1,$port1);
	$iface2bw = get_ifacebw($node2,$card2,$port2);
533 534 535 536 537 538
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
539 540
	    $bw = $iface1bw;
	} else {
541 542 543 544 545
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
546
	}
547
	if (defined($switches{$node2})) {
548 549
	    $used_switches{$node2} = 1;
	}
550 551 552 553 554 555 556 557 558 559 560 561 562 563
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
564
		" $node2:$iface2 $bw 0 0 1\n";
565 566
	}
    } 
567
}
568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
	    my $bw = get_ifacebw($node,$card,$port);
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

618 619
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
620
    print "link link-$interconnect $src $dst $interconnects{$interconnect} 0 0 1\n";
621
}
622

623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
	return $interfacemap{"$node:$card:$port"};
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

# Find the bandwidth for an interface
sub get_ifacebw {
    ($node,$card,$port) = @_;
    if (defined($interfacetypes{"$node:$card:$port"})) {
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}};
644 645 646
    }
    else {
	return $default_switchport_speed;
647 648
    }
}
649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}