stated.in 37.5 KB
Newer Older
Robert Ricci's avatar
Robert Ricci committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3
#
# EMULAB-COPYRIGHT
4
# Copyright (c) 2000-2003 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
5 6 7
# All rights reserved.
#

Robert Ricci's avatar
Robert Ricci committed
8 9 10
#
# stated - A daemon to monitor the states of nodes in the testbed. Recives
# state change notification through the event system, and writes the new
11 12
# state into the database. Also watches for invalid transitions, timeouts, 
# and performs other state-related control functions.
Robert Ricci's avatar
Robert Ricci committed
13 14 15 16
#
# Send it a HUP signal to get it to reload the timeout and transition
# information. Periodically reloads this information regardless, though.
#
17
# Will restart when sent SIGUSR1, by exec'ing its executable again.
Robert Ricci's avatar
Robert Ricci committed
18
#
19

Robert Ricci's avatar
Robert Ricci committed
20 21
# Configure variables
use lib '@prefix@/lib';
22
my $TB = "@prefix@";
23
my $REALTB = "/usr/testbed"; # So we know if we're the "real" stated or not
Robert Ricci's avatar
Robert Ricci committed
24
my $BOSSNODE = "@BOSSNODE@";
25
my $TBOPS = "@TBSTATEDEMAIL@";
26
my $REALTBOPS = "@TBOPSEMAIL@";
27
my $TBDBNAME = "@TBDBNAME@";
28
my $REALTBDBNAME = "tbdb"; # So we know if we're using the "real" db
29
my $osselect = "$TB/bin/os_select";
30 31
my $nodereboot = "$TB/bin/node_reboot";
my $power = "$TB/bin/power";
Robert Ricci's avatar
Robert Ricci committed
32 33 34 35 36 37

$| = 1;

use event;
use libdb;
use libtestbed;
38
use TimeoutQueue;
Robert Ricci's avatar
Robert Ricci committed
39
use Getopt::Std;
40
#use strict;
Robert Ricci's avatar
Robert Ricci committed
41
use English;
Mac Newbold's avatar
Mac Newbold committed
42 43
use POSIX;			# for strftime, and sigprocmask and friends
use Fcntl;			# file constants for pidfile
Mac Newbold's avatar
Mac Newbold committed
44 45 46 47 48
use Sys::Syslog;
# Important note about syslog: It defaults to using an inet socket,
# but 'syslogd -s' (the default) doesn't listen for one. So either
# run syslogd without -s, or use setlogsock('unix') before openlog.
# (To get setlocksock: 'use Sys::Syslog qw(:DEFAULT setlogsock);' )
Robert Ricci's avatar
Robert Ricci committed
49

Mac Newbold's avatar
Mac Newbold committed
50 51 52
# Do lots of db retries before we fail and die
$libdb::DBQUERY_MAXTRIES = 5;

Robert Ricci's avatar
Robert Ricci committed
53 54 55
# Number of iterations (roughly, seconds) after which we'll reload 
# information from the database. This is so we don't end up with information
# that's _too_ out of sync.
56
my $reload_time = 600;
57
my $last_reload = time;
Robert Ricci's avatar
Robert Ricci committed
58 59 60 61

# Process command-line arguments

sub usage {
Mac Newbold's avatar
Mac Newbold committed
62
    print << "END";
63 64 65
Usage: $0 [-h] [-d] [-s server] [-p port]
-h              This message
-d              Turn on debugging output, and don't go into the background
Robert Ricci's avatar
Robert Ricci committed
66 67
-s server       Use specified server, instead of this site's bossnode
-p port	        Use specified port
68
Send SIGHUP to reload database state, or SIGUSR1 to restart completely.
Robert Ricci's avatar
Robert Ricci committed
69 70 71
END
}

Mac Newbold's avatar
Mac Newbold committed
72
# Only root should run this - it won't work when run as a user...
73
# (Or, let an admin run it if it isn't the real one in /usr/testbed/ )
74
if ($UID && ( $TB eq $REALTB || ! TBAdmin($UID) ) ) {
Mac Newbold's avatar
Mac Newbold committed
75 76 77
    die("Only root can run this script!\n");
}

78
my @args = @ARGV;    # save a copy for restart before we mess with them.
Robert Ricci's avatar
Robert Ricci committed
79
my %opt = ();
80
getopts("ds:p:h",\%opt);
Robert Ricci's avatar
Robert Ricci committed
81

Mac Newbold's avatar
Mac Newbold committed
82 83 84 85 86 87
if ($opt{h}) {
    exit &usage;
}
if (@ARGV) {
    exit &usage;
}
Robert Ricci's avatar
Robert Ricci committed
88

89
my ($server,$port,$debug);
Mac Newbold's avatar
Mac Newbold committed
90 91 92 93 94 95 96 97 98 99 100 101 102
if ($opt{s}) {
    $server = $opt{s};
} else {
    $server = $BOSSNODE;
}
if ($opt{p}) {
    $port = $opt{p};
}
if ($opt{d}) {
    $debug = 1;
} else {
    $debug = 0;
}
Robert Ricci's avatar
Robert Ricci committed
103

104
# Grab some constants into variables
105
my $TBANYMODE    = TBDB_NODEOPMODE_ANY;
106 107 108 109 110 111
my $TBRESET      = TBDB_TBCONTROL_RESET;
my $TBRELOADDONE = TBDB_TBCONTROL_RELOADDONE;
my $TBTIMEOUT    = TBDB_TBCONTROL_TIMEOUT;
my $TBNOTIMEOUT  = TBDB_NO_STATE_TIMEOUT;
my $TBNODESTATE  = TBDB_TBEVENT_NODESTATE;
my $TBNODEOPMODE = TBDB_TBEVENT_NODEOPMODE;
112 113 114 115 116 117
my $TBCONTROL    = TBDB_TBEVENT_CONTROL;
my $TBCOMMAND    = TBDB_TBEVENT_COMMAND;
my $TBREBOOT     = TBDB_COMMAND_REBOOT;
my $TBPOWEROFF   = TBDB_COMMAND_POWEROFF;
my $TBPOWERON    = TBDB_COMMAND_POWERON;
my $TBPOWERCYCLE = TBDB_COMMAND_POWERCYCLE;
118
my $TB_OSID_MBKERNEL = TB_OSID_MBKERNEL;
119
my $TBISUP       = TBDB_NODESTATE_ISUP;
120

121 122 123
# This only gets used here, so it isn't in a lib constant.
my $TBFREENODE = "FREENODE";

124
# Set up some notification throttling
Mac Newbold's avatar
Mac Newbold committed
125
my $mailgap = 15;		# in seconds
126 127 128
my $lastmail = time() - $mailgap + 2; # Send a digest of startup msgs after 2s.
my %msgs = ();

Mac Newbold's avatar
Mac Newbold committed
129
my $pidfile;
130
if ( $TB eq $REALTB ) {
Mac Newbold's avatar
Mac Newbold committed
131 132
    $pidfile = "/var/run/stated.pid";
} else {
133
    $pidfile = "$TB/locks/stated.pid";
Mac Newbold's avatar
Mac Newbold committed
134
}
Mac Newbold's avatar
Mac Newbold committed
135 136
debug("Using pidfile $pidfile\n");
if (-e $pidfile) {
Mac Newbold's avatar
Mac Newbold committed
137 138 139 140 141 142 143 144 145 146 147
    my $otherpid = `cat $pidfile`;
    my $running = `ps -auxww | grep $otherpid | grep -v grep`;
    if ($running ne "") {
	fatal("Lockfile $pidfile exists, and process $otherpid appears to be ".
	      "running.\n");
    } else {
	notify("Lockfile exists, but process $otherpid appears to be dead.\n".
	       "Removing lock file...\n");
    }
    system("rm $pidfile") &&
      fatal("Couldn't remove $pidfile: $? $!\n");
Mac Newbold's avatar
Mac Newbold committed
148
}
Robert Ricci's avatar
Robert Ricci committed
149
# Background
150
if (!$debug) {
Mac Newbold's avatar
Mac Newbold committed
151 152 153 154
    # We use syslog, so redirect the output to nothing
    if (TBBackGround("/dev/null")) {
	exit(0);
    }
Robert Ricci's avatar
Robert Ricci committed
155
}
Mac Newbold's avatar
Mac Newbold committed
156 157
# set up syslog
openlog("stated","pid","user");
Mac Newbold's avatar
Mac Newbold committed
158 159 160 161 162 163
sysopen(PIDFILE, $pidfile, O_WRONLY | O_EXCL | O_CREAT) ||
  fatal("Couldn't create '$pidfile': $? $!\n");
print PIDFILE "$$";
close PIDFILE;
# If I make it to here, I'll need to clean up the lock file
my $lockfile=$pidfile;
Robert Ricci's avatar
Robert Ricci committed
164

165 166 167
# Change my $0 so that it is easier to see in a ps/top
$0 = "$0";

Robert Ricci's avatar
Robert Ricci committed
168
my $URL = "elvin://$server";
Mac Newbold's avatar
Mac Newbold committed
169 170 171
if ($port) {
    $URL .= ":$port";
}
Robert Ricci's avatar
Robert Ricci committed
172 173 174

# Connect to the event system, and subscribe the the events we want 
my $handle = event_register($URL,0);
Mac Newbold's avatar
Mac Newbold committed
175 176 177
if (!$handle) {
    fatal("Unable to register with event system\n");
}
Robert Ricci's avatar
Robert Ricci committed
178 179

my $tuple = address_tuple_alloc();
Mac Newbold's avatar
Mac Newbold committed
180 181 182
if (!$tuple) {
    fatal("Could not allocate an address tuple\n");
}
Robert Ricci's avatar
Robert Ricci committed
183

184 185 186
%$tuple = ( objtype => join(",",
			    $TBNODESTATE, $TBNODEOPMODE,
			    $TBCONTROL, $TBCOMMAND) );
187

Robert Ricci's avatar
Robert Ricci committed
188
if (!event_subscribe($handle,\&handleEvent,$tuple)) {
Mac Newbold's avatar
Mac Newbold committed
189
    fatal("Could not subscribe to events\n");
Robert Ricci's avatar
Robert Ricci committed
190 191 192 193
}

# Read in the pre-existing node states, and timeout and valid transition
# information from the database
194 195 196 197
my %timeouts  = getTimeouts();
my %valid     = getValid();
my %modeTrans = getModeTrans();
my %triggers  = getTriggers();
198
my %nodes     = readStates();
199
my %timeouttag= ();
200
if ($debug) { qshow(); }
Robert Ricci's avatar
Robert Ricci committed
201 202 203

# Gets set if a reload of state from the database should happen.
my $do_reload = 0;
204 205
my $sigrestart= 0;
my $sigcleanup= 0;
Robert Ricci's avatar
Robert Ricci committed
206 207 208 209

# Make the daemon reload database state on a sighup - but I'm worried
# about what would happen if we tried to do this mid-loop. So, we'll
# just set a flag and do it when we're done with our current pass.
210 211
$SIG{HUP}  = sub { info("SIGHUP - Reloading DB state\n"); $do_reload = 1; };

Mac Newbold's avatar
Mac Newbold committed
212
# Set up other signals.
213 214 215 216 217 218 219
$SIG{USR1} = \&restart_wrap;
$SIG{USR2} = \&cleanup_wrap;
$SIG{INT}  = \&cleanup_wrap;
$SIG{QUIT} = \&cleanup_wrap;
$SIG{ABRT} = \&cleanup_wrap;
$SIG{TERM} = \&cleanup_wrap;
$SIG{KILL} = \&cleanup_wrap;
Robert Ricci's avatar
Robert Ricci committed
220

221 222 223
# Track if I handled an event or not
my $event_count = 0;

224 225
# Control how long I block while waiting for events
my $blockwait=0;
226
my $nextdeadline=0;
227 228
my $mailqueue=0;

229 230 231 232 233
notify("Stated starting up\n");

sub process_event_queue() {
    $event_count=0;
    my $lastcount=-1;
234 235 236 237 238 239 240 241 242 243 244 245 246
    my $wait;
    my $now = time();
    debug("Polling - mq=$mailqueue bw=$blockwait\n");
    if ( $mailqueue == 0) {
	# no messages waiting...
	if ($blockwait) {
	    # we can wait a long time - nothing else will happen
	    # until we get an event, or get woken up by a signal
	    $wait = 600;
	} else {
	    # only wait until the next deadline...
	    if ($nextdeadline > 0) {
		$wait = $nextdeadline - $now;
247 248
	    } else {
		$wait = 0;
249 250 251 252 253
	    }
	}
    } else {
	# mail is waiting. Only block until it is time to send it.
	$wait = $lastmail + $mailgap - $now;
Mac Newbold's avatar
Mac Newbold committed
254
	debug("Now $now, mailgap $mailgap, last $lastmail ==> wait $wait\n");
255 256 257
    }
    if ($wait < 0) { debug("Wait was $wait!\n"); $wait=0; }
    my $finish = $now + $wait;
Mac Newbold's avatar
Mac Newbold committed
258 259
    while (($event_count != $lastcount || $wait > 0) &&
	   !($sigrestart || $sigcleanup || $do_reload)) {
260
	$lastcount = $event_count;
Mac Newbold's avatar
Mac Newbold committed
261 262
	# Don't block if we got a signal!
	if ($wait<=0 || $sigrestart || $sigcleanup || $do_reload) {
263 264 265 266 267 268 269 270
	    event_poll($handle);
	} else {
	    debug("Using blocking event poll - $wait seconds\n");
	    # timeout param is in milliseconds, so multiply
	    event_poll_blocking($handle, $wait*1000);
	    $now = time();
	    # subtract seconds elapsed from my wait time
	    $wait = $finish - $now;
Mac Newbold's avatar
Mac Newbold committed
271
	    debug("Finished blocking event poll - $wait seconds remain\n");
272
	    if ($event_count > 0 &&
Mac Newbold's avatar
Mac Newbold committed
273 274
		(qsize() > 0 || $mailqueue ||
		 $sigrestart || $sigcleanup || $do_reload)) {
275 276 277 278 279 280 281
		$blockwait=0;
		$wait=0;
		#debug("Cancelling wait - timeouts/msgs waiting, or HUP'd\n");
		#debug("---End Blocking Wait ---\n");
	    }
	}
	#debug("Wait is $wait\n");
282 283
    }
    if ($event_count > 0) {
Mac Newbold's avatar
Mac Newbold committed
284
	debug("Handled $event_count event(s).\n");
285 286
    }
}
Robert Ricci's avatar
Robert Ricci committed
287

288
# Now, we just poll for events, and watch for timeouts
Robert Ricci's avatar
Robert Ricci committed
289
while (1) {
Mac Newbold's avatar
Mac Newbold committed
290
    my $now = time();
291 292 293 294
    my ($deadline,$node);

    # Check for nodes that have passed their timeout
    if (!qhead($deadline,$node)) {
Mac Newbold's avatar
Mac Newbold committed
295
	info("HEAD: $node in ".($deadline-$now).", queue=".qsize()."\n");
296 297
	while ($now >= $deadline && $node ne "") {
	    qpop($deadline,$node);
Mac Newbold's avatar
Mac Newbold committed
298
	    info("POP: $node in ".($deadline-$now).", queue=".qsize()."\n");
299
	    handleCtrlEvent($node,$TBTIMEOUT);
300 301 302 303
	    if (0) { qshow(); }
	    if (qhead($deadline,$node)) {
		$deadline=0; $node="";
	    }
304
	}
305 306
    } else {
	$deadline=0;
307
    }
308
    $nextdeadline = $deadline;
309

310 311 312 313 314
    if (qsize()==0) {
	$blockwait=1;
	debug("---Blocking wait okay---\n");
    }
		
Mac Newbold's avatar
Mac Newbold committed
315 316 317 318
    if ($do_reload || ($now - $last_reload > $reload_time)) {
	reload();
	$do_reload = 0;
    }
Mac Newbold's avatar
Mac Newbold committed
319

Mac Newbold's avatar
Mac Newbold committed
320 321
    # Send any messages in the queue if it is time
    notify("",1);
Mac Newbold's avatar
Mac Newbold committed
322

323 324 325
    if ($sigrestart) { restart(); }
    if ($sigcleanup) { cleanup(); }

326
    process_event_queue;
Robert Ricci's avatar
Robert Ricci committed
327 328
}

Mac Newbold's avatar
Mac Newbold committed
329 330
exit(0);

Robert Ricci's avatar
Robert Ricci committed
331
# Read the current states of nodes from the database
332
sub readStates(;@) {
Mac Newbold's avatar
Mac Newbold committed
333 334 335 336 337 338
    my %oldnodes = @_;

    # Guard against undefined variable warnings
    if (! defined(%oldnodes)) {
	%oldnodes = ();
    }
339

Mac Newbold's avatar
Mac Newbold committed
340 341 342
    #debug("readStates called\n");
    my $result = DBQueryFatal("SELECT node_id, eventstate, " .
			      "state_timestamp, op_mode, " .
343 344
			      "op_mode_timestamp FROM nodes ".
			      "where node_id not like 'sh%'");
Mac Newbold's avatar
Mac Newbold committed
345 346 347 348

    my %nodes;
    while (my ($node_id, $state, $timestamp, $mode, $mode_timestamp)
	   = $result->fetchrow()) {
349
	#
Mac Newbold's avatar
Mac Newbold committed
350 351 352 353
	# If there's an entry in oldnodes for this node, and it
	# hasn't changed state or time, use the old entry (so that
	# we don't lose information about which nodes we've already
	# notified the ops about, etc.)
354
	#
Mac Newbold's avatar
Mac Newbold committed
355 356 357 358 359
	if ($oldnodes{$node_id} && $state && $timestamp &&
	    ($oldnodes{$node_id}{state} eq $state) &&
	    ($oldnodes{$node_id}{mode} eq $mode) &&
	    ($oldnodes{$node_id}{timestamp} == $timestamp)) {
	    $nodes{$node_id} = $oldnodes{$node_id};
360
	} else {
Mac Newbold's avatar
Mac Newbold committed
361 362 363 364
	    $nodes{$node_id}{state}          = $state;
	    $nodes{$node_id}{timestamp}      = $timestamp;
	    $nodes{$node_id}{mode}           = $mode;
	    $nodes{$node_id}{mode_timestamp} = $mode_timestamp;
365 366
	    # Is there a timeout? If so, set it up!
	    setTimeout($mode,$state,$node_id,$timestamp);
367
	}
Mac Newbold's avatar
Mac Newbold committed
368 369
    }
    return %nodes;
Robert Ricci's avatar
Robert Ricci committed
370 371 372 373 374 375
}

#
# Read timeouts for various states from the database
#
sub getTimeouts() {
Mac Newbold's avatar
Mac Newbold committed
376 377 378
    #debug("getTimeouts called\n");
    my $result = DBQueryFatal("SELECT op_mode, state, timeout, action " .
			      "FROM state_timeouts");
Robert Ricci's avatar
Robert Ricci committed
379

Mac Newbold's avatar
Mac Newbold committed
380 381 382 383 384
    my %timeouts;
    while (my ($op_mode, $state, $timeout, $action) = $result->fetchrow()) {
	$timeouts{$op_mode}{$state} = [ $timeout, $action ];
    }
    return %timeouts;
Robert Ricci's avatar
Robert Ricci committed
385 386 387 388 389 390
}

#
# Read the list of valid state transitions from the database
#
sub getValid() {
Mac Newbold's avatar
Mac Newbold committed
391 392 393
    #debug("getValid called\n");
    my $result = DBQueryFatal("SELECT op_mode, state1, state2 " .
			      "FROM state_transitions");
Robert Ricci's avatar
Robert Ricci committed
394

Mac Newbold's avatar
Mac Newbold committed
395 396 397 398 399
    my %valid;
    while (my ($mode,$state1, $state2) = $result->fetchrow()) {
	$valid{$mode}{$state1}{$state2} = 1;
    }
    return %valid;
Robert Ricci's avatar
Robert Ricci committed
400 401
}

402 403 404 405
#
# Read the list of valid mode transitions from the database
#
sub getModeTrans() {
Mac Newbold's avatar
Mac Newbold committed
406 407 408 409 410 411 412 413 414 415 416 417 418
    #debug("getModeTrans called\n");
    my $result = 
      DBQueryFatal("SELECT op_mode1, state1, op_mode2, state2 " .
		   "FROM mode_transitions order by op_mode1,state1");

    my %modeTrans;
    while (my ($mode1,$state1, $mode2, $state2) = $result->fetchrow()) {
	if (!defined($modeTrans{"$mode1:$state1"})) {
	    $modeTrans{"$mode1:$state1"}= ["$mode2:$state2"];
	} else {
	    my @l = @{$modeTrans{"$mode1:$state1"}};
	    push(@l, "$mode2:$state2");
	    $modeTrans{"$mode1:$state1"}= \@l;
419
	}
Mac Newbold's avatar
Mac Newbold committed
420 421
    }
    return %modeTrans;
422 423 424 425 426 427
}

#
# Read the list of states which trigger an action
#
sub getTriggers() {
428 429 430 431 432
    debug("getTriggers called\n");
    
    debug("anymode ==> '$TBANYMODE'\n");

    # Grab global triggers
Mac Newbold's avatar
Mac Newbold committed
433 434
    my $result = 
      DBQueryFatal("SELECT op_mode, state, trigger " .
435 436
		   "FROM state_triggers where node_id='$TBANYMODE' ".
		   "order by op_mode,state");
Mac Newbold's avatar
Mac Newbold committed
437
    my %t;
438
    while (my ($mode, $state, $trig) = $result->fetchrow()) {
Mac Newbold's avatar
Mac Newbold committed
439
	$t{"$mode:$state"} = $trig;
440 441 442 443 444 445 446 447 448 449 450 451
	debug("trig($mode:$state)\t => $trig\n");
    }

    # Grab per-node triggers
    $result = 
      DBQueryFatal("SELECT node_id, op_mode, state, trigger " .
		   "FROM state_triggers where node_id!='$TBANYMODE' ".
		   "order by op_mode,state");
    while (my ($n, $mode, $state, $trig) = $result->fetchrow()) {
	my @trigs = split(/\s*,\s*/,$trig);
	$t{"$n:$mode:$state"} = \@trigs;
	debug("trig($n:$mode:$state)\t => ".join(',',@trigs)."\n");
Mac Newbold's avatar
Mac Newbold committed
452
    }
453

Mac Newbold's avatar
Mac Newbold committed
454
    return %t;
455 456
}

Robert Ricci's avatar
Robert Ricci committed
457 458 459 460
#
# Gets called for every event that we recieve
#
sub handleEvent($$$) {
Mac Newbold's avatar
Mac Newbold committed
461 462 463 464 465 466 467 468 469 470 471
    my ($handle,$notification,$data) = @_;
    my $objtype = event_notification_get_objtype($handle,$notification);
    my $objname = event_notification_get_objname($handle,$notification);
    my $eventtype = event_notification_get_eventtype($handle,$notification);

    $event_count++;
    debug("Got an event: ($objtype,$objname,$eventtype)\n");

    #
    # Check to see if another instance is supposed to be handling this node
    #
472
    if ($objtype ne $TBCOMMAND && !checkDBRedirect($objname)) {
Mac Newbold's avatar
Mac Newbold committed
473 474 475
	info("Got an event for node $objname, which isn't mine\n");
	return;
    }
476

Mac Newbold's avatar
Mac Newbold committed
477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492
  SWITCH: for ($objtype) {
	
	(/$TBNODESTATE/) && do {
	    stateTransition($objname,$eventtype);
	    last;
	};
	(/$TBNODEOPMODE/) && do {
	    opModeTransition($objname,$eventtype);
	    notify("Use of deprecated event TBNODEOPMODE:\n".
		   "$objname->$eventtype\n");
	    last;
	};
	(/$TBCONTROL/) && do {
	    handleCtrlEvent($objname,$eventtype);
	    last;
	};
493 494 495 496
	(/$TBCOMMAND/) && do {
	    handleCommand($objname,$eventtype);
	    last;
	};
497

Mac Newbold's avatar
Mac Newbold committed
498
    }
499 500 501 502 503

}

sub stateTransition($$) {

504
    my ($node,$newstate) = @_;
Robert Ricci's avatar
Robert Ricci committed
505

506 507 508 509 510 511 512 513
    # Check for invalid transitions
    my ($oldstate, $mode);
    if ($nodes{$node}) {
	$oldstate = $nodes{$node}{state};
	$mode = $nodes{$node}{mode};
    } else {
	# Try reloading the cache once before we give up on this node
	reload();
514
	if ($nodes{$node}) {
515 516
	    $oldstate = $nodes{$node}{state};
	    $mode = $nodes{$node}{mode};
Robert Ricci's avatar
Robert Ricci committed
517
	} else {
518
	    notify("Got an event for a node ($node) I don't know about\n");
Robert Ricci's avatar
Robert Ricci committed
519
	}
520 521 522 523
    }
    if ($oldstate && $mode && $valid{$mode} && $valid{$mode}{$oldstate} &&
	!$valid{$mode}{$oldstate}{$newstate}) {
	notify("Invalid transition for node $node from $mode/$oldstate " .
524
	       "to $newstate\n");
525
    }
Robert Ricci's avatar
Robert Ricci committed
526

527 528 529 530
    my $now = time();
    $nodes{$node}{state}     = $newstate;
    $nodes{$node}{timestamp} = $now;
    $nodes{$node}{notified}  = 0;
531

532 533 534
    info("$node: $mode/$oldstate => $mode/$newstate\n");
    DBQueryFatal("UPDATE nodes SET eventstate='$newstate', " .
		 "state_timestamp='$now' WHERE node_id='$node'");
535

536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556
    # Before we set the timeout (overwriting any current ones), we need
    # to check if we had a pending command
    if (qfind($node) &&
	$timeout_tag{$node} =~ /^$TBCOMMAND:/) {
	my ($str,$cmd) = split(":",$timeout_tag{$node});
	if ($cmd eq $TBREBOOT) {
	    if ($state eq TBDB_NODESTATE_SHUTDOWN ) {
		info("$node: $TBREBOOT success\n");
		# Timeout will get cleared below by setTimeout call
	    } else {
		notify("$node: $TBREBOOT in progress, but got state $state ".
		       "instead of ". TBDB_NODESTATE_SHUTDOWN ."!\n");
	    }
	#} elsif ($cmd eq $FOO ) {
	    # Add more here...
	} else {
	    notify("$node: Unknown command timeout '$timeout_tag{$node}' ".
		   "found at $mode/$state\n");
	}
    }

557 558 559
    # Check if this state has a timeout, and if so, put it in the queue
    setTimeout($mode,$newstate,$node,$now);

560 561
    # Check if this is TBDB_NODESTATE_BOOTING , which has actions
    if ($newstate eq TBDB_NODESTATE_BOOTING) {
562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579
	# If I skipped shutdown, and came to booting directly from isup,
	# check for a mode transition so I don't miss one...
	if ($oldstate eq TBDB_NODESTATE_ISUP) {
	    info("$node: Came from ISUP! Checking for mode transition\n");
	    my $r = DBQueryWarn("select next_op_mode from nodes ".
				"where node_id='$node'");
	    my ($nextmode) = $r->fetchrow();
	    if ($nextmode) {
		# Force the transition even though it is illegal
		info("$node: Forcing mode transition!\n");
		opModeTransition($node,$nextmode,1);
		$mode=$nextmode;
	    } else {
		debug("No next mode.\n");
	    }
	}

	# Check if I'm in the right mode
580
	my $osid = TBBootWhat($node,$debug);
581 582
	my $os_op_mode = os_opmode($osid);
	info("$node: Current OS is '$osid', OS mode is '$os_op_mode'\n");
583
	DBQueryFatal("UPDATE nodes SET osid='$osid' WHERE node_id='$node'");
584
	if ($os_op_mode ne $mode) {
585 586
	    my $str = "Node $node is running OS '$osid' but in mode '$mode' ".
	      "instead of mode '$os_op_mode'!\n";
587 588 589
	    # For now, only force if we're going into reload mode, so we
	    # don't get stuck looping in reloading.
	    if ($os_op_mode eq "RELOAD") {
590 591 592 593 594 595 596 597 598
		DBQueryFatal("UPDATE nodes SET op_mode='$os_op_mode', ".
			     "op_mode_timestamp=unix_timestamp(now()) ".
			     "WHERE node_id='$node'");
		$nodes{$node}{mode} = $os_op_mode;
		$nodes{$node}{mode_timestamp} = $now;
		$str .= "Forced op_mode to '$os_op_mode'.\n";
	    }
	    notify($str);
	}
599 600
	checkGenISUP($node);
    }
601

602 603 604 605 606
    # Check if this state has any triggers
    my @nodetrigs = GetNodeTriggerList($node,$mode,$newstate);
    if (defined($triggers{"$mode:$newstate"}) ||
        (@nodetrigs > 0) ) {
	# check for global triggers
607
	my @trigs = split(/\s*,\s*/,$triggers{"$mode:$newstate"});
608 609 610 611
	# Run all the triggers
	debug("Running triggers. Global=".join("/",@trigs).
	      "   node=".join("/",@nodetrigs)."\n");
	foreach ( @trigs , @nodetrigs) {
612 613 614 615 616 617 618 619 620 621 622 623 624 625 626
	    my $trig = $_;
	    /^$TBRESET$/ && do {
		# Check if we really need to do a reset
		my $r = DBQueryWarn("select osid,def_boot_osid from nodes ".
				    "where node_id='$node'");
		my ($osid,$defosid) = $r->fetchrow();
		if ($osid ne $defosid) {
		    handleCtrlEvent($node,$trig);
		}
		next;
	    };
	    /^$TBRELOADDONE$/ && do {
		handleCtrlEvent($node,$trig);
		next;
	    };
627 628 629 630
	    /^$TBFREENODE$/ && do {
		handleCtrlEvent($node,$trig);
		next;
	    };
631 632 633 634 635 636 637 638
	    /^$TBISUP$/ && do {
		info("$node: Triggered $TBISUP\n");
		EventSendWarn(host      => $BOSSNODE ,
			      objtype   => TBDB_TBEVENT_NODESTATE ,
			      eventtype => TBDB_NODESTATE_ISUP ,
			      objname   => $node);
		next;
	    };
639
	    notify("Unknown trigger '$trig' for $node in $mode/$newstate!\n");
640
	}
641 642 643
	# Clear any of the node triggers that we ran
	debug("Clearing node triggers: ".join("/",@nodetrigs)."\n");
	ClearNodeTrigger($node,$mode,$newstate,@nodetrigs);
644
    }
645

646 647 648 649 650 651 652 653
    # Check if this state can trigger a mode transition
    if (defined($modeTrans{"$mode:$newstate"})) {
	info("$node: Checking for mode transition\n");
	my $r = DBQueryWarn("select next_op_mode from nodes ".
			    "where node_id='$node'");
	my ($nextmode) = $r->fetchrow();
	if ($nextmode) {
	    opModeTransition($node,$nextmode);
Mac Newbold's avatar
Mac Newbold committed
654 655 656
	} else {
	    debug("No next mode.\n");
	}
657 658
    }
}
659

660
sub opModeTransition($$;$) {
Mac Newbold's avatar
Mac Newbold committed
661

662 663
    my ($node,$newmode,$force) = @_;
    if (!defined($force)) { $force = 0; }
Mac Newbold's avatar
Mac Newbold committed
664

665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680
    info("$node: Mode change to $newmode requested\n");
    # Check for invalid transitions
    my ($oldstate, $mode, $nextstate);
    if ($nodes{$node}) {
	$oldstate = $nodes{$node}{state};
	$mode = $nodes{$node}{mode};
    } else {
	# Try reloading the cache once before we give up on this node
	reload();
	if ($nodes{$node}) {
	    $oldstate = $nodes{$node}{state};
	    $mode = $nodes{$node}{mode};
	} else {
	    notify("Got an event for a node ($node) I don't know about\n");
	}
    }
681
    if (defined($modeTrans{"$mode:$oldstate"}) || $force) {
682
	if (!$force) {
683 684 685 686 687 688 689 690 691 692 693 694 695 696 697
	    debug("Mode Transition check:\n");
	    my $translist = join(",",@{$modeTrans{"$mode:$oldstate"}});
	    #debug("translist=$translist\n");
	    #debug("splitlist=".join(", ",split(/[:,]/,$translist))."\n");
	    my %trans = split(/[:,]/,$translist);
	    debug("Valid transitions from $mode/$oldstate are:\n");
	    foreach my $k (sort keys %trans) {
		debug("$k => $trans{$k}\n");
	    }
	    if (defined($trans{$newmode})) {
		$nextstate=$trans{$newmode};
	    } else {
		notify("Invalid mode transition for $node from ".
		       "$mode/$oldstate to $newmode!\n");
	    }
698 699
	}
    } else {
700
	notify("Invalid mode transition for $node from $mode/$oldstate: ".
701 702
	       "Not a valid mode transition state!\n");
    }
Mac Newbold's avatar
Mac Newbold committed
703 704 705
    if (!$nextstate) {
	$nextstate=$oldstate;
    }
Mac Newbold's avatar
Mac Newbold committed
706

707 708 709 710 711 712
    my $now = time();
    $nodes{$node}{state}     = $nextstate;
    $nodes{$node}{timestamp} = $now;
    $nodes{$node}{mode}           = $newmode;
    $nodes{$node}{mode_timestamp} = $now;
    $nodes{$node}{notified}       = 0;
Mac Newbold's avatar
Mac Newbold committed
713

714 715 716 717 718
    info("$node: $mode/$oldstate => $newmode/$nextstate\n");
    DBQueryFatal("UPDATE nodes SET eventstate='$nextstate', ".
		 "next_op_mode='', op_mode='$newmode', ".
		 "state_timestamp='$now', ".
		 "op_mode_timestamp='$now' WHERE node_id='$node'");
Mac Newbold's avatar
Mac Newbold committed
719 720 721 722

    # Check if this state has a timeout, and if so, put it in the queue
    setTimeout($newmode,$nextstate,$node,$now);

723 724 725 726
}

sub handleCtrlEvent($$) {
    my ($node,$event) = @_;
727

728
    info("CtrlEvent: $node, $event\n");
729

730 731
    foreach ($event) {
	/^$TBRESET$/ && do {
Mac Newbold's avatar
Mac Newbold committed
732 733 734
	    my $result = DBQueryFatal("SELECT pxe_boot_path, def_boot_osid ".
				      "FROM nodes where node_id='$node'");
	    my ($pxepath,$osid) = $result->fetchrow();
735

736 737 738 739
	    # Important note on ordering here:
	    # Because setting a normal osid resets pxe path to PXEBOOT,
	    # We need to read it out first, then set the osid, then set
	    # the pxepath back to its original value at the end.
740

741 742
	    $cmd = "$osselect $osid $node";
	    system($cmd) and
Mac Newbold's avatar
Mac Newbold committed
743 744
	      notify("$node/$event: Couldn't clear next_boot_*\n".
		     "\tcmd=$cmd\n\t*** $!\n");
745

746
	    $pxepath = "-p ".$pxepath;
Mac Newbold's avatar
Mac Newbold committed
747 748 749 750
	    if ($pxepath eq "-p ") {
		$pxepath="PXEBOOT";
	    }
	    ;
Mac Newbold's avatar
Mac Newbold committed
751
	    my $cmd = "$osselect -m $pxepath $node";
752
	    system($cmd) and
Mac Newbold's avatar
Mac Newbold committed
753 754
	      notify("$node/$event: Couldn't clear next_pxe_boot_path\n".
		     "\tcmd=$cmd\n\t*** $!\n");
755

Mac Newbold's avatar
Mac Newbold committed
756
	    info("Performed RESET for $node to $osid/$pxepath\n");
757 758 759 760 761 762 763 764 765 766
	    next;
	};
	/^$TBRELOADDONE$/ && do {
	    info("Clearing reload info for $node\n");
	    DBQueryFatal("delete from current_reloads where node_id='$node'");
	    my ($pid,$eid);
	    NodeidToExp($node,\$pid,\$eid);
	    if (($pid eq NODERELOADING_PID) && ($eid eq NODERELOADING_EID)) {
		DBQueryFatal("delete from scheduled_reloads ".
			     "where node_id='$node'");
767 768 769 770
		AddNodeTrigger($node, $TBANYMODE, TBDB_NODESTATE_ISUP,
			       $TBFREENODE)
		  && notify("$node: Couldn't add trigger $TBFREENODE!\n");
		info("Set up freeing of $node from $pid/$eid\n");
771 772 773
	    }
	    next;
	};
774 775 776 777 778 779 780 781
	/^$TBFREENODE$/ && do {
	    # Don't need pid/eid, but we should put it in the log
	    my ($pid,$eid);
	    NodeidToExp($node,\$pid,\$eid);
	    DBQueryFatal("delete from reserved where node_id='$node'");
	    info("Released $node from $pid/$eid\n");
	    next;
	};
782
	/^$TBTIMEOUT$/ && do {
783 784 785 786
	    my ($mode,$state) = split(":",$timeout_tag{$node});
	    delete($timeout_tag{$node});
	    my $curstate = $nodes{$node}{state};
	    my $curmode = $nodes{$node}{mode};
787
	    my ($timeout,$action);
788 789 790 791 792
	    if (!defined($nodes{$node}{notified})) {
		$nodes{$node}{notified}=0;
	    }
	    $nodes{$node}{notified}++;
	    my $notified = $nodes{$node}{notified};
793 794 795 796
	    if ($mode && $state && $timeouts{$mode} &&
		$timeouts{$mode}{$state}) {
		($timeout, $action) = @{$timeouts{$mode}{$state}};
	    }
797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814
	    if ($mode eq $TBCOMMAND) {
		# It is a command, not a true state
		if ($action eq "CMDRETRY") {
		    # Retry the command
		    notify("$node: Command $state, retry #$notified\n");
		    # notify in case we get in a retry loop...
		    handleCommand($node,$state,$notified);
		} else {
		    notify("$node: Unknown timeout action for ".
			   "$mode/$state: '$action'\n");
		}
		next;
	    } else {
		if ($notified>1) {	
		    notify("$node: Timed out at $now (d=$deadline), ".
			   "but notified already!\n");
		}
	    }
815 816
	    notify("Node $node has timed out in state $mode/$state".
		   ($action ne "" ? "\n\tRequested action $action." : "").
817
		   "\n");
818 819
	    next;
	};
820
	notify("$node: Unknown CtrlEvent: $event\n");
821 822
    }
}
Robert Ricci's avatar
Robert Ricci committed
823

824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893
sub handleCommand($$;$) {
    my ($params,$command,$retry) = @_;
    if (!defined($retry)) { $retry=0; }

    info("Command: $params, $command (attempt $retry)\n");

    # XXX - Right now we skip the checkDBRedirect calls for our
    # TBCOMMAND events, since they may have a list of nodes in them.
    # We may need to do it here (while iterating over the list), or
    # make some other fix up in handleEvent.

    if ($command eq $TBREBOOT && $retry >=3) {
	announce("Node $params has tried rebooting $retry times and has \n".
		 "still not been successful. Please look into it soon.\n".
		 "In the meantime, $params will be powered off.\n");
	# change my command to poweroff.
	$command = $TBPOWEROFF;
    }

    foreach ($command) {
	/^$TBREBOOT$/ && do {
	    # For reboot, the params is a comma-separated list of nodes
	    my @nodes = split(",",$params);
	    my $nodelist=join(" ",@nodes);
	    info("Rebooting nodes: $nodelist\n");
	    # Permissions were checked in order to send the message,
	    # so we don't need to do any fancy stuff here.

	    my $cmd = "$nodereboot $nodelist &";
	    debug("$cmd\n") or
	    #system($cmd) and
	      notify("$params/$command: ".
		     "Command '$cmd' failed, error $?: $!\n");

	    # Set up a timeout, so we retry if we don't get SHUTDOWN in time
	    foreach $node (@nodes) {
		# Note: This will replace any state timeouts currently in
		# the queue. But here that's okay because we're expecting
		# to see another transition really soon anyway.
		setTimeout($TBCOMMAND,$command,$node,time());
	    }

	    info("Performed $command for $params\n");
	    next;
	};
	(/^$TBPOWEROFF$/ || /^$TBPOWERON$/ || /^$TBPOWERCYCLE$/) && do {
	    # For power, the params is a comma-separated list of nodes
	    my @nodes = split(",",$params);
	    my $nodelist=join(" ",@nodes);
	    my %funcmap = ( $TBPOWERCYCLE => "cycle",
			    $TBPOWERON    => "on",
			    $TBPOWEROFF   => "off");
	    my $func = $funcmap{$command};
	    info("Sending power $func nodes: $nodelist\n");
	    # Permissions were checked in order to send the message,
	    # so we don't need to do any fancy stuff here.

	    my $cmd = "$power $func $nodelist &";
	    debug("$cmd\n") or
	    #system($cmd) and
	      notify("$params/$command: ".
		     "Command '$cmd' failed, error $?: $!\n");

	    info("Performed $command for $params\n");
	    next;
	};
	notify("$params: Unknown Command: $command\n");
    }
}

894 895 896 897
#
# Check if we need to generate an ISUP
#
sub checkGenISUP($) {
Mac Newbold's avatar
Mac Newbold committed
898 899 900 901 902 903 904 905 906 907
    my ($node) = @_;
    debug("$node: Checking ISUP Generation\n");
    my $r = DBQueryWarn("select osfeatures from nodes as n ".
			"left join os_info as o on o.osid=n.osid ".
			"where node_id='$node' and osfeatures is not null");
    my $osfeatures="";
    # If we don't get anything back, assume it has no features.
    if ($r->num_rows() > 0) {
	($osfeatures) = $r->fetchrow();
    }
Mac Newbold's avatar
Mac Newbold committed
908

Mac Newbold's avatar
Mac Newbold committed
909 910 911 912 913 914
    my @features = split(",",$osfeatures);
    # Make sure features I care about are defined
    my %can=("ping"=>0, "isup"=>0);
    foreach my $f (@features) {
	$can{"\L$f"}=1;	# make sure it's all lowercase
    }
Mac Newbold's avatar
Mac Newbold committed
915

Mac Newbold's avatar
Mac Newbold committed
916 917 918 919 920
    # If os will send ISUP on its own, do nothing here.
    if ($can{"isup"}) {
	debug("$node: Will send own ISUP\n"); 
	return 0;
    }
Mac Newbold's avatar
Mac Newbold committed
921

Mac Newbold's avatar
Mac Newbold committed
922 923 924 925 926 927
    # If os doesn't support isup but can ping, fork and ping it every
    # few seconds and send isup when it pings, or timeout after too long.
    if ($can{"ping"}) {
	debug("$node: Needs to be pinged - calling eventping\n");
	system("$TB/sbin/eventping $node &");
	return 0;
928
    }
Mac Newbold's avatar
Mac Newbold committed
929

Mac Newbold's avatar
Mac Newbold committed
930 931 932 933 934 935 936 937
    # If os doesn't support ping or isup, stated sends ISUP just after 
    # the node gets to BOOTING (a bit early, but the best we can do)

    debug("$node: OS doesn't ping - sending ISUP\n");
    EventSendWarn(host      => $BOSSNODE ,
		  objtype   => TBDB_TBEVENT_NODESTATE ,
		  eventtype => TBDB_NODESTATE_ISUP ,
		  objname   => $node);
Robert Ricci's avatar
Robert Ricci committed
938 939
}

940 941 942 943
# Figure out if this node belongs to us (ie. if it's using our database.)
# Returns 1 if it does, 0 if not
sub checkDBRedirect($) {

Mac Newbold's avatar
Mac Newbold committed
944
    my ($node) = @_;
945

Mac Newbold's avatar
Mac Newbold committed
946 947 948 949 950 951 952 953
    # XXX: I don't want to do this every time, for performance reaons,
    # but we need to make sure that we don't get into an inconsistent 
    # state
    my $result=DBQueryFatal("SELECT testdb FROM nodes as n " .
			    "LEFT JOIN reserved as r ON n.node_id=r.node_id ".
			    "LEFT JOIN experiments as e ON r.pid = e.pid " .
			    "AND r.eid = e.eid " .
			    "WHERE n.node_id = '$node'");
954

Mac Newbold's avatar
Mac Newbold committed
955 956 957 958
    if (!$result->num_rows()) {
	notify("Got an event for a node ($node) I don't know about\n");
	return 0;
    }
959

Mac Newbold's avatar
Mac Newbold committed
960
    my ($testdb) = $result->fetchrow();
961

Mac Newbold's avatar
Mac Newbold committed
962 963 964
    # XXX: It's hokey to hardcode tbdb here, but....

    #debug("checkDBRedirect: $node => $testdb (I'm $TBDBNAME)\n");
965
    if ((!$testdb && ($TBDBNAME eq $REALTBDBNAME)) ||
Mac Newbold's avatar
Mac Newbold committed
966 967 968 969 970
	($testdb && ($testdb eq $TBDBNAME))) {
	return 1;
    } else {
	return 0;
    }
971 972
}

973 974 975 976
# Check if this state has a timeout, and if so, put it in the queue
sub setTimeout( $$$$ ) {
    my ($mode,$state,$node,$now) = @_;
    if (0) { print "Original: ($mode,$state,$node,$now)\n"; qshow(); }
977
    if (defined(qfind($node))) { qdelete($node); delete($timeout_tag{$node}); }
978 979 980 981 982 983 984 985 986 987 988
    if (0) { print "Deleted:\n"; qshow(); }
    if (defined($mode) && defined($state) &&
	defined($timeouts{$mode}) &&
	defined($timeouts{$mode}{$state})) {
	my $deadline = ${$timeouts{$mode}{$state}}[0];
        if (defined($deadline) &&
	    $deadline != $TBNOTIMEOUT) {
	    my $TO = $deadline + $now;
	    debug("Setting timeout for ($node,$mode,$state) at ".
		  "$deadline + $now ($TO)\n");
	    qinsert($TO,$node);
989
	    $timeout_tag{$node} = "$mode:$state";
990 991 992 993 994 995
	    if (0) { qshow(); }
	}
    }
    if (0) { print "Done:\n"; qshow(); }
}

Robert Ricci's avatar
Robert Ricci committed
996 997
# Reload state from the database
sub reload() {
Mac Newbold's avatar
Mac Newbold committed
998 999 1000 1001 1002 1003
    debug("Reloading state from database\n");
    $last_reload = time();
    %timeouts  = getTimeouts();
    %valid     = getValid();
    %modeTrans = getModeTrans();
    %triggers  = getTriggers();
1004
    %nodes     = readStates(%nodes);
Robert Ricci's avatar
Robert Ricci committed
1005 1006
}

1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086
#
# Some functions for node triggers
#

# $rv   = AddNodeTrigger($node, $mode, $state, @triglist);
sub AddNodeTrigger( $$$@ ) {
    my ($node, $mode, $state, @trigs) = @_;
    if (@trigs == 0) { return 1; }
    if (defined($triggers{"$node:$mode:$state"})) {
	my %t = ();
	foreach $k (@{$triggers{"$node:$mode:$state"}}) { $t{$k} = 1; }
	my @newtrigs = ();
	foreach $k (@trigs) { if (!defined($t{$k})) { push(@newtrigs,$k); } }
	push(@{$triggers{"$node:$mode:$state"}},@newtrigs);
    } else {
	$triggers{"$node:$mode:$state"} = \@trigs;
    }
    my $triglist = join(",",@{$triggers{"$node:$mode:$state"}});
    DBQueryFatal("replace into state_triggers ".
		 "(node_id,op_mode,state,trigger) values ".
		 "('$node','$mode','$state','$triglist')");
    return 0;
}

# @list = GetNodeTriggerList($node, $mode, $state);
sub GetNodeTriggerList( $$$ ) {
    my ($node, $mode, $state) = @_;
    my @l = ();
    if (defined($triggers{"$node:$mode:$state"})) {
	push(@l,@{$triggers{"$node:$mode:$state"}});
    }
    if (defined($triggers{"$node:$TBANYMODE:$state"})) {
	push(@l,@{$triggers{"$node:$TBANYMODE:$state"}});
    }
    return @l;
}

# $rv   = ClearNodeTrigger($node, $mode, $state, @triglist);
# Note: When not clearing all triggers, ordering is not preserved!
sub ClearNodeTrigger( $$$ ; @ ) {
    my ($node, $mode, $state, @trigs) = @_;
    # We have to keep any triggers that aren't on the list, but the
    # most common case will be that the list they give us is the whole
    # list anyway. So treat that case special.
    my @reallist = GetNodeTriggerList($node,$mode,$state);
    # empty list means clear all...
    if ((@trigs==0) || join(",",sort @reallist) eq join(",",sort @trigs)) {
	# Same list... just nuke the entry
	debug("Clearing all triggers for $node...\n");
	delete($triggers{"$node:$mode:$state"});
	delete($triggers{"$node:$TBANYMODE:$state"});
	DBQueryFatal("delete from state_triggers ".
		     "where node_id='$node' and state='$state' and ".
		     "(op_mode='$mode' or op_mode='$TBANYMODE')");
    } else {
	# Subtract @trigs from @reallist
	my %temptrigs = ();
	foreach $k (@reallist) { $temptrigs{$k} = 1; }
	debug("Reallist = ".join("/",@reallist).", trigs=".
	      join("/",@trigs).".\n");
	foreach $t (@trigs) {
	    if (defined($temptrigs{$t})) {
		delete($temptrigs{$t});
		debug("Clearing $t\n");
	    }
	}
	# Note: This doesn't quite do the right thing with triggers
	# for a fixed mode vs TBANYMODE. So if you start using this
	# code, make sure and debug it first!
	my @newtrigs = keys %temptrigs;
	debug("Newlist = ".join("/",@newtrigs).".\n");
	delete($triggers{"$node:$mode:$state"});
	if (@newtrigs > 0) {
	    AddNodeTrigger($node,$mode,$state,@newtrigs);
	} 
    }

    return 0;
}

1087 1088
sub os_opmode() {
    my $osid = shift || "";
Mac Newbold's avatar
Mac Newbold committed
1089 1090 1091
    if ($osid eq $TB_OSID_MBKERNEL) {
	return "MINIMAL";
    }
1092 1093
    my $cmd = "select op_mode from os_info where osid='$osid';";
    my $q = DBQueryFatal($cmd);
Mac Newbold's avatar
Mac Newbold committed
1094 1095 1096
    if ($q->numrows() < 1) {
	return "";
    }
1097 1098 1099
    my @r = $q->fetchrow_array();
    my $opmode=$r[0];
    debug("OpMode for '$osid' is '$opmode'\n");
Mac Newbold's avatar
Mac Newbold committed
1100 1101 1102
    if (defined($opmode) && $opmode ne "") {
	return $opmode;
    }
1103 1104
    return "";
}
Mac Newbold's avatar
Mac Newbold committed
1105

1106 1107 1108 1109
#
# Functions for controlling output/logging, and signal handling
#

Robert Ricci's avatar
Robert Ricci committed
1110
sub debug(@) {
Mac Newbold's avatar
Mac Newbold committed
1111 1112 1113
    if ($debug) {
	print @_;
    }
Mac Newbold's avatar
Mac Newbold committed
1114 1115 1116
}

sub fatal($) {
Mac Newbold's avatar
Mac Newbold committed
1117 1118 1119
    my $msg = shift;
    notify($msg);
    die($msg);
Robert Ricci's avatar
Robert Ricci committed
1120 1121
}

Mac Newbold's avatar
Mac Newbold committed
1122
sub showqueue() {
Mac Newbold's avatar
Mac Newbold committed
1123 1124 1125 1126 1127 1128 1129 1130 1131 1132
    if ($debug < 2) {
	return;
    }
    if ((keys %msgs) > 0) {
	debug("\nMAILQUEUE:\n");
    }
    foreach $k (sort keys %msgs) {
	my @l = @{$msgs{$k}};
	debug("MSGS:\n$k==> (".(@l+0).",'".join("','",@l)."')\n");
    }
Mac Newbold's avatar
Mac Newbold committed
1133 1134 1135
}

sub notify($;$) {
Mac Newbold's avatar
Mac Newbold committed
1136 1137 1138 1139
    my $message = shift;
    my $checkonly = shift || 0;
    # Use a timestamp, now that we're throttling mail
    my $tstamp=strftime("%b %e %H:%M:%S",localtime);
Mac Newbold's avatar
Mac Newbold committed
1140
    showqueue();
Mac Newbold's avatar
Mac Newbold committed