ptopgen.in 23.8 KB
Newer Older
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1
#!/usr/bin/perl -w
Leigh B. Stoller's avatar
Leigh B. Stoller committed
2 3 4

#
# EMULAB-COPYRIGHT
5
# Copyright (c) 2000-2004 University of Utah and the Flux Group.
Leigh B. Stoller's avatar
Leigh B. Stoller committed
6 7 8
# All rights reserved.
#

9 10
use English;
use Getopt::Std;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
11

12 13
sub usage()
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
14 15
    print("Usage: ptopgen [-v] [-s switch] [-p pid [-e eid]] [-m factor] " .
	  "[-n c/e]\n".
16
	  "       -p include nodes the project has permission to use\n".
17
	  "       -e include given experiments resources\n" .
18 19
	  "          in the ptopfile (as if they were free)\n" .
	  "       -v Include stuff for topologies with virtual nodes\n".
20
	  "       -r Include stuff for topologies with widearea nodes\n".
21
	  "       -s Include stuff for topologies with simulated nodes\n".
22
	  "       -a Include even reserved nodes\n".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
23 24
	  "       -m Override multiplex_factor\n".
	  "       -n Add in modelnet core and edge node features\n");
25 26
    exit(-1);
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
27
my $optlist = "s:e:m:vp:rSan:";
28
my $mfactor;
29
my $virtstuff = 0;
30
my $widearea  = 0;
31
my $simstuff  = 0;
32
my $allnodes  = 0;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
33 34
my $mnetcores = 0;
my $mnetedges = 0;
35

36 37 38 39
#
# Turn off line buffering on output
#
$| = 1;
40 41 42 43 44 45 46 47 48 49 50 51

# Settings - Change these to your particular network.

#
# Also bogus. The interfaces table does not hold entries for the switch
# side of each link. It will have to at some point, when we have something
# other than 100Mbs ports (say, gbit ports).
#
# Speed in in Kbs!
#
my $default_switchport_speed    = 100000;

52 53 54 55 56 57
#
# Yet more bogosity - we hardcode this weight, which is given to wide-area
# (primarily plab) nodes to prefer spreading across sites
#
my $site_weight = 0.99;

58 59
######################################################################

60
my $TBROOT = "@prefix@";
61
use lib '@prefix@/lib';
62
require exitonwarn;
63
use libdb;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
64

65 66
my $TRACK_INTERSWITCH_BANDWIDTH = "@TRACK_INTERSWITCH_BANDWIDTH@";

67 68 69
my %switches	  = ();
my %used_switches = ();
my %permissions   = ();
70 71
my %typemap       = ();
my %auxtypemap    = ();
72

73 74 75
my $DEADPID = NODEDEAD_PID();
my $DEADEID = NODEDEAD_EID();

76
my $pid;
77
my $exempt_eid;
78
my $switchtouse;
79

80 81 82 83 84 85 86 87 88 89 90 91 92 93
#
# Parse command arguments. Once we return from getopts, all that should be
# left are the required arguments.
#
%options = ();
if (! getopts($optlist, \%options)) {
    usage();
}
if (@ARGV) {
    usage();
}
if (defined($options{"s"})) {
    $switchtouse = $options{"s"};
}
94 95 96
if (defined($options{"m"})) {
    $mfactor = $options{"m"};
}
97 98 99
if (defined($options{"v"})) {
    $virtstuff = 1;
}
100 101 102
if (defined($options{"r"})) {
    $widearea = 1;
}
103 104 105
if (defined($options{"S"})) {
    $simstuff = 1;
}
106 107 108
if (defined($options{"p"})) {
    $pid = $options{"p"};
}
109 110 111
if (defined($options{"a"})) {
    $allnodes = 1;
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
112 113 114 115 116 117 118 119 120
if (defined($options{"n"})) {
    if ($options{"n"} =~ /(\d*),(\d*)/) {
	$mnetcores = $1;
	$mnetedges = $2;
    }
    else {
	usage();
    }
}
121
if (defined($options{"e"})) {
122 123 124
    $exempt_eid = $options{"e"};
    usage()
	if (!defined($pid));
125 126
}

127
# Read class/type maps
128
my $result =
129
    DBQueryFatal("select class,type,delay_capacity,".
130
		 "   virtnode_capacity,isvirtnode,simnode_capacity, " .
131
		 "   speed, RAM, trivlink_maxspeed, imageable, osid ".
132
		 "from node_types");
133
while (($class,$type,$delaycapacity,
134 135
	$virtcapacity,$isvirt,$simcapacity, $speed, $ram, $trivspeed,
	$imageable, $osid)
136
	    = $result->fetchrow_array) {
137 138 139 140
    $map = {};
    $map->{'CLASS'}    = $class;
    $map->{'DELAYCAP'} = $delaycapacity;
    $map->{'VIRTCAP'}  = $virtcapacity;
141
    $map->{'SIMCAP'}   = $simcapacity;
142
    $map->{'ISVIRT'}   = $isvirt;
143 144
    $map->{'SPEED'}    = $speed;
    $map->{'RAM'}      = $ram;
145 146
    $map->{'OSID'}     = $osid;
    $map->{'IMAGEABLE'}= $imageable;
147
    $map->{'TRIVSPEED'}= $trivspeed;
148 149 150
    $map->{'FEATURES'} = [];
    $map->{'AUXTYPES'} = {};
    $typemap{$type} = $map;
151 152 153 154 155 156 157 158 159 160 161

    # Default is permission to use all types,classes. 
    $permissions{$class} = 1;
    $permissions{$type}  = 1;
}

#
# Read the features table for each type.
# 
$result = DBQueryFatal("select type, feature, weight from node_type_features");
while (my ($type, $feature, $weight) = $result->fetchrow()) {
162 163 164 165 166 167 168 169 170 171
    push(@{$typemap{$type}->{'FEATURES'}}, "$feature:$weight");
}

#
# Read the auxtypes for each type.
# 
$result = DBQueryFatal("select auxtype,type from node_types_auxtypes");
while (my ($auxtype,$type) = $result->fetchrow()) {
    $typemap{$type}->{'AUXTYPES'}->{$auxtype} = 1;
    $auxtypemap{$auxtype} = $type;
172 173
}

174 175 176 177 178 179 180 181 182 183 184 185
#
# Read the features table for each individual node
#
$result = DBQueryFatal("select node_id, feature, weight from node_features");
while (my ($node_id, $feature, $weight) = $result->fetchrow()) {
    if (! defined($features{$node_id})) {
	$features{$node_id} = ["$feature:$weight"];
	next;
    } else {
	push @{$features{$node_id}}, "$feature:$weight";
    }
}
186 187 188 189 190 191 192 193 194
#
# Read in the node_auxtypes table for each node.
#
$result = DBQueryFatal("select node_id, type, count from node_auxtypes");
while (my ($node_id, $type, $count) = $result->fetchrow()) {
    if (! defined($auxtypes{$node_id})) {
	$auxtypes{$node_id} = ["$type:$count"];
	next;
    }
195
    push @{$auxtypes{$node_id}}, "$type:$count";
196
}
197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
#
# Read the permission table if given a pid. If there is an entry in
# the table for a type/class, then permission is granted only if there
# is a record with the pid. If not, remove the permission granted above.
# 
if (defined($pid)) {
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 0;
    }
    
    $result =
	DBQueryFatal("select type from nodetypeXpid_permissions ".
		     "where pid='$pid'");
    
    while (my ($type) = $result->fetchrow_array) {
	$permissions{$type} = 1;
    }
217 218
}

219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257
#
# Read the table of which image types are supported on which hardware - we
# limit this to global images and ones that match the PID (if given) We do this
# limiting for two reasons:
# 1) To avoid an explosion in the number of features for nodes
# 2) To avoid information leaks, allowing projects to see each other's images
# 
my $osidquery = "select distinct o.osid, oi.type from os_info as o " .
	"left join osidtoimageid as oi on o.osid = oi.osid " .
	"left join images as i on oi.imageid = i.imageid ".
	"where i.global = 1";
if ($pid) {
    $osidquery .= " or i.pid='$pid'";
}

my %node_type_osids;
my %osid_node_types;
$result = DBQueryFatal($osidquery);
while (my ($osid,$type) = $result->fetchrow()) {
    if ($node_type_osids{$type}) {
	push @{$node_type_osids{$type}}, $osid;
    } else {
	$node_type_osids{$type} = [$osid];
    }
    #
    # We have to maintain a data structure telling us which types an OSID could
    # be on for use below with generic OSIDs
    #
    if ($osid_node_types{$osid}) {
	push @{$osid_node_types{$osid}}, $type;
    } else {
	$osid_node_types{$osid} = [$type];
    }
}

#
# We also have to resolve the 'generic' OSIDs, which use the nextosid field to
# redirect to another OSID
#
258
$result = DBQueryFatal("select osid from os_info where " .
259
    "nextosid is not null");
260
while (my ($osid) = $result->fetchrow()) {
261 262 263
    #
    # Check to see if they were allowed to use the real OSID
    #
264
    my $realosid = TBResolveNextOSID($osid, $pid, $exempt_eid);
265 266
    if ($osid_node_types{$realosid}) {
	foreach my $type (@{$osid_node_types{$realosid}}) {
267 268 269 270 271
	    push @{$node_type_osids{$type}}, $osid;
	}
    }
}

272
# Print switches
273
if (defined($switchtouse)) {
274
    print "node $switchtouse switch:1 *lan:*\n";
275 276 277 278 279 280 281
    $switches{$switchtouse} = 1;
}
else {
    $result =
	DBQueryFatal("select node_id from nodes where role = \"testswitch\"");

    while (($switch) = $result->fetchrow_array) {
282
	print "node $switch switch:1 *lan:*\n";
283 284
	$switches{$switch} = 1;
    }
285
}
286

287
# Find available nodes.
288
#
289 290
# This first query deals with just local nodes. Local nodes can host
# virtnodes, according to the delay_capacity in the types table. 
291
#
292

293
# the ordinary free condition for a local node.
294 295
my $free_condition = "(b.node_id is null and ".
                     " (np.eventstate='" . TBDB_NODESTATE_ISUP . "' or ".
296 297
                     "  np.eventstate='" . TBDB_NODESTATE_PXEWAIT . "' or ".
                     "  np.eventstate='" . TBDB_NODESTATE_ALWAYSUP . "')) ";
298 299 300 301 302

# if the user has specified an exempt pid/eid, 
# then view any node which is reserved to that experiment as available.
if (defined($exempt_eid)) {
    $free_condition = "($free_condition or ".
303
	"(b.pid='$pid' and b.eid='$exempt_eid'))"; 
304
}
Chad Barb's avatar
Chad Barb committed
305

306 307 308 309 310 311
# If the user wants all nodes, we consider everything to be free (this
# overrides the other possible free conditions
if ($allnodes) {
    $free_condition = "1";
}

312
$result =
313
    DBQueryFatal("select a.node_id,a.type,a.phys_nodeid,t.class,t.issubnode," .
314 315
		 "a.def_boot_osid, (b.pid is not null and b.eid is not null) " .
		 "from nodes as a ".
316 317
		 "left join reserved as b on a.node_id=b.node_id ".
		 "left join reserved as m on a.phys_nodeid=m.node_id ".
318
		 "left join nodes as np on a.phys_nodeid=np.node_id ".
319
		 "left join node_types as t on t.type=a.type ".
320
		 "where $free_condition and ".
321
		 "      (a.role='testnode' and t.isremotenode=0)");
Leigh B. Stoller's avatar
Leigh B. Stoller committed
322

323 324 325
#
# Scan the results, checking permissions and adding to the list
# You get to use a node type if no pid was specified (that is, you get
326 327 328
# to use all nodes), or if there is no entry in the perms table for
# the type/class of node.
#
329
while (($node,$type,$physnode,$class,$issubnode,$def_boot_osid,$reserved) 
330
    = $result->fetchrow_array) {
331 332 333
    $nodes{$node} = $type
	if (!defined($pid) ||
	    ($permissions{$type} && $permissions{$class}));
334 335 336
    if ($issubnode) {
	$subnode_of{$node} = $physnode;
    }
337
    $node_def_boot_osid{$node} = $def_boot_osid;
338 339 340 341 342 343

    if ($reserved) {
	$is_reserved{$node} = 1;
    } else {
	$is_reserved{$node} = 0;
    }
344
}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
345 346

foreach $node (keys(%nodes)) {
347 348 349
    my $type  = $nodes{$node};
    my $class = $typemap{$type}->{'CLASS'};
    my $delay_capacity = $typemap{$type}->{'DELAYCAP'};
350
    my $simnode_capacity = $typemap{$type}->{'SIMCAP'};
351 352
    my $cpu_speed = $typemap{$type}->{'SPEED'};
    my $ram = $typemap{$type}->{'RAM'};
353
    my $trivspeed = $typemap{$type}->{'TRIVSPEED'};
354
    
355
    my @types = ("$type:1");
356 357
    my @features;
    my @flags;
358
    my $needvirtgoo = 0;
359

360 361 362 363 364 365 366 367 368 369
    # XXX temporary hack until node reboot avoidance 
    # is available. Nodes running the FBSD-NSE image
    # will have a feature def-osid-fbsd-nse 0.0
    # This is used by assign to prefer these pnodes
    # first before using others.
    if( $node_def_boot_osid{$node} eq 
	TBOSID(TB_OPSPID, "FBSD-NSE") ) { 
	push(@features, "FBSD-NSE:0.0");
    }

370
    # Might be equal, which assign would sum as two, not one!
371 372
    if ($type ne $class) {
	push(@types, "$class:1");
373 374
    }

375
    if ($delay_capacity > 0) {
376
	push @types, "delay:$delay_capacity";
377
	push @types, "delay-${type}:$delay_capacity";
378
    }
379

380 381 382
    #
    # Add any auxiliary types
    #
383 384 385
    foreach my $auxinfo (@{$auxtypes{$node}}) {
	my ($auxtype,$count) = split(":", $auxinfo);
	my $realtype;
386

387 388 389
	# Map an auxtype back to its real type, unless it is a real type.
	if (defined($auxtypemap{$auxtype})) {
	    $realtype = $auxtypemap{$auxtype};
390 391
	}
	else {
392
	    $realtype = $auxtype;
393
	}
394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409

	if ($typemap{$realtype}->{'ISVIRT'} && $count > 0) {
	    next
		if (! $virtstuff);
		
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
	    }
	    $needvirtgoo = 1;
	}
	push(@types, $auxinfo);
    }

410
    my $cpu_ram_features_present = 0;
411 412 413 414
    #
    # This stuff is extra goo for local virtual nodes.
    # 
    if ($needvirtgoo) {
415
	push @types, "*lan:*";
416 417 418 419
	# Add trivial bw spec., but only if the node type has it
	if ($trivspeed) {
	    push @flags, "trivial_bw:$trivspeed";
	}
420
	# Add CPU and RAM information
421
	$cpu_ram_features_present++;
422 423
	# This number can be use for fine-tuning packing
	push @features, "?+virtpercent:100";
424 425 426
	# Put this silly feature in so that we can try to keep vnodes
	# on the same pnode they were before
	push @features, "${node}:0.0";
427 428
    }

429 430 431 432 433 434 435 436 437 438
    if ($simstuff && $simnode_capacity > 0) {
	#
	# Use user specified multiplex factor
	#
	if (defined($mfactor) && $mfactor <= $simnode_capacity) {
	    push @types, "sim:$mfactor";
	}
	else {
	    push @types, "sim:$simnode_capacity";
	}
439
	# Add CPU and RAM information
440
	$cpu_ram_features_present++;
441 442 443 444
	push @types, "*lan:*";
	# Add trivial bw spec.
	push @flags, "trivial_bw:100000";
    }
445 446 447 448
    if ($cpu_ram_features_present) {
	# Add CPU and RAM information
	push @features, "?+cpu:$cpu_speed";
	push @features, "?+ram:$ram";
449 450
	push @features, "?+cpupercent:92"; # XXX Hack
	push @features, "?+rampercent:80"; # XXX Hack
451
    }
452

453
    # Add features
454
    push(@features, @{$typemap{$type}->{'FEATURES'}});
455 456
    if (defined($features{$node})) {
	push @features, @{$features{$node}};
457 458
    }

459 460 461 462 463 464 465
    #
    # Add in features for all of the OSes that this node (as evidenced by its
    # type) can support
    #
    if ($node_type_osids{$type}) {
	push @features, map "OS-$_:0", @{$node_type_osids{$type}};
    }
466 467 468 469 470 471 472 473 474 475 476
    elsif (! $typemap{$type}->{'IMAGEABLE'} &&
	   defined($typemap{$type}->{'OSID'})) {
	#
	# If node is not imageable (and thus no entries in osidtoimageid,
	# then assume it always has its default OSID loaded and ready to
	# go, so that assign will agree to the allocation (assign_wrapper
	# adds a desire that says it has to be running the OSID the user
	# has selected, or the default OSID from the node_types table).
	#
	push @features, map "OS-$_:0", $typemap{$type}->{'OSID'};
    }
477

478 479
    # This is for the case that we are modifying an existing experiment - tell
    # assign to prefer nodes the user has already allocated
480
    if ($exempt_eid && !$allnodes && $is_reserved{$node}) {
481 482 483
	push(@features,"already_reserved:0");
    }

Leigh B. Stoller's avatar
Leigh B. Stoller committed
484 485 486 487 488 489 490 491
    # Add in modelnet stuff.
    if ($mnetcores) {
	push(@types, "modelnet-core:$mnetcores");
    }
    if ($mnetedges) {
	push(@types, "modelnet-edge:$mnetedges");
    }

492 493 494 495 496 497 498 499 500 501 502
    #
    # Handle subnodes
    #
    if ($subnode_of{$node}) {
	# We don't want to include subnodes unless their parent node is going
	# to be in the ptop file too
	if (!$nodes{$subnode_of{$node}}) {
	    # In fact, nuke it from %nodes so that we don't include its links,
	    # either
	    delete $nodes{$node};
	    next;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
503
	}
504 505
	# Push the subnode's information into its flags
	push @flags, "subnode_of:$subnode_of{$node}";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
506
    }
507 508 509 510 511

    my $text = "node $node " . join(" ",@types) . " - " . join(" ",@features) .
	" - " . join(" ",@flags);


512
    print "$text\n";
Leigh B. Stoller's avatar
Leigh B. Stoller committed
513 514
}

515 516 517 518 519 520 521 522 523 524 525
#
# Widearea Nodes. Includes plab nodes. Note that widearea nodes are never
# allocated directly (they are in a holding experiment), but assign deals
# with it by allocating multiple vnodes on a pnode.
#
# The underlying physnode has to be "up", as determined by the
# autostatus stuff; this will prevent us from allocating a dead
# virtual node to an experiment.  This is especially hacky. We need
# another mechanism for this. We only add virtnodes when assign says
# we need them. This reduces the problem size for assign.
#
526 527 528 529
# The types we lay out are only those in the auxtypes table for the node,
# since that is where we define what vtypes are hosted on a particular
# physnode. 
#
530 531
if ($widearea) {
    $result =
Leigh B. Stoller's avatar
Leigh B. Stoller committed
532 533 534 535 536
	DBQueryFatal("select n.node_id,nt.type,ns.status,r.pid,r.eid,wn.site ".
		     "from nodes as n ".
		     "left join node_types as nt on nt.type=n.type ".
		     "left join reserved as r on r.node_id=n.node_id ".
		     "left join node_status as ns on ns.node_id=n.node_id ".
537
		     "left join widearea_nodeinfo as wn on ".
Leigh B. Stoller's avatar
Leigh B. Stoller committed
538 539 540
		     "     wn.node_id=n.node_id ".
		     "where  (n.role='testnode' and nt.isremotenode=1 and ".
		     "        nt.isvirtnode=0)");
541
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
542 543
    while (($physnode,$ptype,$status,$mpid,$meid,$site)
	   = $result->fetchrow_array) {
544
	my $class = $typemap{$ptype}->{'CLASS'};
545 546 547 548
	my @types;
	my @features;
	my @flags;

549 550 551 552 553
	#
	# Mark any nodes that are not up with a feature, so that they won't
	# normally get assigned. We want to include them, though, because we
	# allow people to do fix-node to down nodes
	#
554 555
	if (($status && ($status ne 'up')) ||
	    ($mpid eq $DEADPID && $meid eq $DEADEID)) {
556 557 558
	    push @features, "down:1";
	}

559 560 561 562 563 564 565
	#
	# Mark which site this node belongs to
	#
	if ($site) {
	    push @features, "*&$site:$site_weight";
	}

566 567 568
	#
	# Add any auxiliary types.
	#
569 570
	foreach my $auxinfo (@{$auxtypes{$physnode}}) {
	    my ($auxtype,$count) = split(":", $auxinfo);
571

Leigh B. Stoller's avatar
Leigh B. Stoller committed
572 573 574 575 576
	    if (defined($mfactor) && $mfactor <= $count) {
		$auxinfo = "$auxtype:$mfactor";
	    }
	    else {
		$auxinfo = "$auxtype:$count";
577
	    }
578
	    push(@types, $auxinfo);
579 580 581 582 583
	}

	# Add trivial bw spec.
	push @flags, "trivial_bw:400000";

584 585 586
	# Indicate that these nodes are beautiful and unique snowflakes
	push @flags, "unique";

587
	# Add features
588
	push(@features, @{$typemap{$ptype}->{'FEATURES'}});
589 590
	if (defined($features{$physnode})) {
	    push @features, @{$features{$physnode}};
591 592
	}

593 594 595 596 597 598 599 600
	#
	# Add in features for all of the OSes that this node (as evidenced by
	# its type) can support
	#
	if ($node_type_osids{$ptype}) {
	    push @features, map "OS-$_:0", @{$node_type_osids{$ptype}};
	}

601 602 603 604 605 606 607 608
	my $text = "node $physnode " .
	           join(" ",@types) . " - " . join(" ",@features) .
		   " - " . join(" ",@flags);

	print "$text\n";
    }
}

609
# Read interfaces
610
$result = DBQueryFatal("SELECT node_id,card,port,iface,interface_type" .
611
		     " from interfaces");
612
while (($node,$card,$port,$iface,$type) = $result->fetchrow_array) {
613
    $interfacemap{"$node:$card:$port"} = $iface;
Chad Barb's avatar
 
Chad Barb committed
614
    if ((defined $type) && ($type ne "")) {
615 616 617 618
	$interfacetypes{"$node:$card:$port"} = $type;
    }
}

619 620 621 622 623 624 625 626 627 628 629 630 631 632 633
# Read interface types. First need to find the protocols an interface supports
# and then then the speed for each of those protocols.
# Note that we are going to assume anything attached to a switch is ethernet.
$result = DBQueryFatal("SELECT type,capkey,capval from interface_capabilities ".
		       "where capkey='protocols' or capkey like '%_defspeed'"); 
while (($type,$capkey,$capval) = $result->fetchrow_array) {
    if ($capkey eq "protocols") {
	$interfaceprotocols{$type} = [ split(",", $capval) ];
    }
    elsif ($capkey =~ /^([-\w]+)_defspeed$/) {
	$interfacespeeds{$type}{$1} = $capval;
    }
    else {
	die("Improper defspeed $capval for $type!\n");
    }
634 635
}

636 637 638 639 640 641 642 643 644 645 646 647 648 649 650
# Read interface switches
$result = DBQueryFatal("SELECT node_id1, iface, node_id2 FROM wires AS w " .
	"LEFT JOIN interfaces as i ON w.node_id1=i.node_id AND w.card1=i.card");
while (($node,$iface,$switch) = $result->fetchrow_array) {
    if ($node && $iface) {
	$interfaceswitches{"$node:$iface"} = $switch;
    }
}

# Read interface cards and ports
$result = DBQueryFatal("SELECT node_id, iface, card, port FROM interfaces");
while (($node,$iface,$card,$port) = $result->fetchrow_array) {
    $interfacecardports{"$node:$iface"} = [$card,$port];
}

651
$result = DBQueryFatal("SELECT node_id1,card1,port1,node_id2,card2,port2" .
652
 		    " from wires where type=\"Node\" or type=\"Trunk\"");
653
while (($node1,$card1,$port1,$node2,$card2,$port2) = 
654
       $result->fetchrow_array) {
655
    if ((defined($nodes{$node1}) || defined($switches{$node1})) && 
656
	(defined($nodes{$node2}) || defined($switches{$node2}))) {
657 658
	$iface1 = get_iface($node1,$card1,$port1);
	$iface2 = get_iface($node2,$card2,$port2);
659 660
	$iface1bw = get_ifacebw($node1,$card1,$port1,"ethernet");
	$iface2bw = get_ifacebw($node2,$card2,$port2,"ethernet");
661 662 663 664 665 666
	# XXX - This is a bad, bad hack - we  use our knowledge that in the
	# wires table links to the switch always come as node2. We also assume
	# that node interfaces are plugged into switch ports of the same speed.
	# Chris has something better on the way (storing the speed on the
	# switch side), so this is just a temp. hack.
	if (!defined($switches{$node1}) && defined($switches{$node2})) {
667 668
	    $bw = $iface1bw;
	} else {
669 670 671 672 673
	    if ($iface1bw < $iface2bw) {
		$bw = $iface1bw;
	    } else {
		$bw = $iface2bw;
	    }
674
	}
675
	if (defined($switches{$node2})) {
676 677
	    $used_switches{$node2} = 1;
	}
678 679 680 681 682 683 684 685 686 687 688 689 690 691
	if (defined($switches{$node1})) {
	    $used_switches{$node1} = 1;
	}
	if (defined($switches{$node1}) && defined($switches{$node2})) {
	    # interswitch link
	    if (defined($interconnects{"$node1:$node2"})) {
		$interconnects{"$node1:$node2"} += $bw;
	    } else {
		$interconnects{"$node1:$node2"} = $bw;
	    }
	} else {
	    # !!! - Here we use our knowledge that in the wires table links
	    # to the switch always come as node2.
	    print "link link-$node1:$iface1-$node2:$iface2 $node1:$node1/$iface1" .
692
		" $node2:$iface2 $bw 0 0 1 ethernet\n";
693 694
	}
    } 
695
}
696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715

#
# If we're supposed to track interswitch bandwidth, subtract out the amount
# that's already in use
#
if ($TRACK_INTERSWITCH_BANDWIDTH) {
    #
    # Get a list of all VLANs
    #
    my $result = DBQueryFatal("SELECT virtual, members FROM vlans");
    while (my ($virtual, $members) = $result->fetchrow()) {
	#
	# Split apart the space-separated list of members
	#
	my @members = split /\s+/, $members;
	my %switches = ();
	foreach my $member (@members) {
	    my ($node,$iface) = split /:/, $member;
	    my $switch = get_ifaceswitch($node,$iface);
	    my ($card, $port) = get_ifacecardport($node,$iface);
716
	    my $bw = get_ifacebw($node,$card,$port,"ethernet");
717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745
	    $switches{$switch} += $bw;
	}

	#
	# Check to see if more than one switch was found among the member
	# list, and if so, go through all the pairs
	#
	my @switches = keys %switches;
	if (@switches > 1) {
	    for (my $i = 0; $i < (@switches -1); $i++) {
		my $switch1 = $switches[$i];
		my $switch2 = $switches[$i+1];
		my $bw = $switches{$switch1};
		if ($switches{$switch2} < $bw) {
			$bw = $switches{$switch2};
		}
		#
		# The trunk link could be listed in either order
		#
		if ($interconnects{"$switch1:$switch2"}) {
		    $interconnects{"$switch1:$switch2"} -= $bw;
		} elsif ($interconnects{"$switch2:$switch1"}) {
		    $interconnects{"$switch2:$switch1"} -= $bw;
		}
	    }
	}
    }
}

746 747
foreach $interconnect (keys(%interconnects)) {
    ($src,$dst) = split(":",$interconnect);
748 749
    print "link link-$interconnect $src $dst $interconnects{$interconnect} " .
	"0 0 1 ethernet\n";
750
}
751

752
#
753
# Fake switch. Hardwired for now. 
754
#
755 756 757
my @wireless_protos = ("80211", "80211a", "80211b", "80211g");
my $fake_switch = "airswitch";
print "node $fake_switch ", join(" ",map("*$_:*",@wireless_protos)), "\n";
758

759 760
foreach my $interface (keys(%interfacetypes)) {
    my ($node,$card,$port) = split(":", $interface);
761

762 763
    next
    if (!defined($nodes{$node}));
764
	
765 766 767
    my $type    = $interfacetypes{$interface};
    my @protos  = @{ $interfaceprotocols{$type} };
    my $iface   = get_iface($node,$card,$port);
768

769 770 771 772 773 774 775 776
    #
    # Get the intersection of the protocols supported by this interface, and
    # the wireless protocols we know about
    #
    my (%union, %intersection);
    foreach $proto (@protos, @wireless_protos) {
	$union{$proto}++ && $intersection{$proto}++;
    }
777

778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793
    my @intersection = keys %intersection;

    #
    # Skip this interface if it speaks no wireless protocols
    #
    next unless @intersection;

    #
    # Find the max bandwidth supported by any of the wireless protocols
    # supported by this interface
    #
    my $max_bw = 0;
    foreach my $proto (@intersection) {
	my $ifacebw = get_ifacebw($node,$card,$port,$proto);
	if ($ifacebw > $max_bw) {
	    $max_bw = $ifacebw;
794 795
	}
    }
796 797 798
    print "link link-$node:$iface-$fake_switch:(null) ".
	"$node:$node/$iface $fake_switch:(null) $max_bw 0 0 1 ".
	join(" ",@intersection). "\n";
799 800 801 802
}

exit(0);

803 804 805 806
# Print out links
sub get_iface {
    ($node,$card,$port) = @_;
    if (defined($interfacemap{"$node:$card:$port"})) {
807 808 809 810 811
	if ($interfacemap{"$node:$card:$port"} eq "") {
	    return "(null)";
	} else {
	    return $interfacemap{"$node:$card:$port"};
	}
812 813 814 815 816 817 818 819 820 821 822
    } else {
	# shark hack
	if ($node =~ /^sh/) {
	    return "eth0";
	} else {
	    return "(null)";
	}
	# end shark hack 
    }
};

823 824
# Find the bandwidth for an interface, when using the given protocol (which
# most of the time is ethernet).
825
sub get_ifacebw {
826
    ($node,$card,$port,$protocol) = @_;
827
    if (defined($interfacetypes{"$node:$card:$port"})) {
828
	return $interfacespeeds{$interfacetypes{"$node:$card:$port"}}{$protocol};
829 830 831
    }
    else {
	return $default_switchport_speed;
832 833
    }
}
834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851

sub get_ifaceswitch {
    ($node,$iface) = @_;
    if (defined($interfaceswitches{"$node:$iface"})) {
	return $interfaceswitches{"$node:$iface"};
    } else {
	return undef;
    }
}

sub get_ifacecardport {
    ($node,$iface) = @_;
    if (defined($interfacecardports{"$node:$iface"})) {
	return @{$interfacecardports{"$node:$iface"}};
    } else {
	return ();
    }
}