libsetup.pm 40.6 KB
Newer Older
1 2
#!/usr/bin/perl -wT

Leigh B. Stoller's avatar
Leigh B. Stoller committed
3 4 5 6 7 8
#
# EMULAB-COPYRIGHT
# Copyright (c) 2000-2002 University of Utah and the Flux Group.
# All rights reserved.
#

9 10 11 12 13 14 15 16 17 18 19
#
# Common routines and constants for the client bootime setup stuff.
#
package libsetup;
use Exporter;
@ISA = "Exporter";
@EXPORT =
    qw ( libsetup_init inform_reboot cleanup_node check_status
	 create_nicknames doifconfig dohostnames
	 doaccounts dorpms dotarballs dostartupcmd install_deltas
	 bootsetup nodeupdate startcmdstatus whatsmynickname
20
	 TBBackGround TBForkCmd remotenodeupdate remotenodevnodesetup
21

Leigh B. Stoller's avatar
Leigh B. Stoller committed
22
	 OPENTMCC CLOSETMCC RUNTMCC MFS REMOTE
23 24

	 TMCC TMIFC TMDELAY TMRPM TMTARBALLS TMHOSTS
25 26
	 TMNICKNAME HOSTSFILE TMSTARTUPCMD FINDIF TMTUNNELCONFIG
	 TMTRAFFICCONFIG TMROUTECONFIG TMVNODEDIR
27 28 29

	 TMCCCMD_REBOOT TMCCCMD_STATUS TMCCCMD_IFC TMCCCMD_ACCT TMCCCMD_DELAY
	 TMCCCMD_HOSTS TMCCCMD_RPM TMCCCMD_TARBALL TMCCCMD_STARTUP
30
	 TMCCCMD_DELTA TMCCCMD_STARTSTAT TMCCCMD_READY TMCCCMD_TRAFFIC
Leigh B. Stoller's avatar
Leigh B. Stoller committed
31
	 TMCCCMD_BOSSINFO TMCCCMD_VNODELIST TMCCCMD_ISALIVE
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

       );

# Must come after package declaration!
use English;

#
# This is the home of the setup library on the client machine. The including
# program has to tell us this by calling the init routine below. For example,
# it is /etc/testbed on FreeBSD and /etc/rc.d/testbed on Linux.
#
my $SETUPDIR;

sub libsetup_init($)
{
    my($path) = @_;

    $SETUPDIR = $path;
}

#
# This "local" library provides the OS dependent part. Must load this after
# defining the above function cause the local library invokes it to set the
# $SETUPDIR
#
use liblocsetup;

59 60 61 62 63 64 65
#
# For virtual (multiplexed nodes). If defined, tack onto tmcc command.
# and use in pathnames. Not sure how this will be used later with jailed
# virtual nodes, since they will run in their own environment, but without
# jail we have to share the same namespace.
#
my $vnodeid	= "";
66
my $vnodedir;
67

68 69 70 71 72 73 74 75 76 77 78 79 80 81
#
# These are the paths of various files and scripts that are part of the
# setup library.
#
sub TMCC()		{ "$SETUPDIR/tmcc"; }
sub TMIFC()		{ "$SETUPDIR/rc.ifc"; }
sub TMRPM()		{ "$SETUPDIR/rc.rpm"; }
sub TMTARBALLS()	{ "$SETUPDIR/rc.tarballs"; }
sub TMSTARTUPCMD()	{ "$SETUPDIR/startupcmd"; }
sub TMHOSTS()		{ "$SETUPDIR/hosts"; }
sub TMNICKNAME()	{ "$SETUPDIR/nickname"; }
sub FINDIF()		{ "$SETUPDIR/findif"; }
sub HOSTSFILE()		{ "/etc/hosts"; }
sub TMMOUNTDB()		{ "$SETUPDIR/mountdb"; }
82 83 84 85
sub TMROUTECONFIG()     { ($vnodedir ? $vnodedir : $SETUPDIR) . "/rc.route";}
sub TMTRAFFICCONFIG()	{ ($vnodedir ? $vnodedir : $SETUPDIR) . "/rc.traffic";}
sub TMTUNNELCONFIG()	{ ($vnodedir ? $vnodedir : $SETUPDIR) . "/rc.tunnel";}
sub TMVTUNDCONFIG()	{ ($vnodedir ? $vnodedir : $SETUPDIR) . "/vtund.conf";}
86 87
sub TMPASSDB()		{ "$SETUPDIR/passdb"; }
sub TMGROUPDB()		{ "$SETUPDIR/groupdb"; }
88 89

#
90 91 92 93 94
# This is the VERSION. We send it through to tmcd so it knows what version
# responses this file is expecting.
#
# BE SURE TO BUMP THIS AS INCOMPATIBILE CHANGES TO TMCD ARE MADE!
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
95
sub TMCD_VERSION()	{ 5; };
96 97 98

#
# These are the TMCC commands. 
99 100 101 102 103 104
#
sub TMCCCMD_REBOOT()	{ "reboot"; }
sub TMCCCMD_STATUS()	{ "status"; }
sub TMCCCMD_IFC()	{ "ifconfig"; }
sub TMCCCMD_ACCT()	{ "accounts"; }
sub TMCCCMD_DELAY()	{ "delay"; }
105
sub TMCCCMD_HOSTS()	{ "hostnames"; }
106 107 108 109 110 111 112
sub TMCCCMD_RPM()	{ "rpms"; }
sub TMCCCMD_TARBALL()	{ "tarballs"; }
sub TMCCCMD_STARTUP()	{ "startupcmd"; }
sub TMCCCMD_DELTA()	{ "deltas"; }
sub TMCCCMD_STARTSTAT()	{ "startstatus"; }
sub TMCCCMD_READY()	{ "ready"; }
sub TMCCCMD_MOUNTS()	{ "mounts"; }
113
sub TMCCCMD_ROUTING()	{ "routing"; }
114 115
sub TMCCCMD_TRAFFIC()	{ "trafgens"; }
sub TMCCCMD_BOSSINFO()	{ "bossinfo"; }
116
sub TMCCCMD_TUNNEL()	{ "tunnels"; }
117
sub TMCCCMD_NSECONFIGS(){ "nseconfigs"; }
118
sub TMCCCMD_VNODELIST() { "vnodelist"; }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
119
sub TMCCCMD_ISALIVE()   { "isalive"; }
120 121 122 123 124 125

#
# Some things never change.
# 
my $TARINSTALL  = "/usr/local/bin/install-tarfile %s %s";
my $DELTAINSTALL= "/usr/local/bin/install-delta %s";
126
my $VTUND       = "/usr/local/sbin/vtund";
127 128 129 130 131 132 133 134

#
# This is a debugging thing for my home network.
# 
#my $NODE	= "REDIRECT=155.101.132.101";
$NODE		= "";

# Locals
135 136 137 138
my $pid		= "";
my $eid		= "";
my $vname	= "";

Leigh B. Stoller's avatar
Leigh B. Stoller committed
139 140 141 142
# Control tmcc error condition and timeout. Dynamic, not lexical!
$tmccdie        = 1; 
$tmcctimeout    = 0;

143 144 145 146
# When on the MFS, we do a much smaller set of stuff.
# Cause of the way the packages are loaded (which I do not understand),
# this is computed on the fly instead of once.
sub MFS()	{ if (-e "$SETUPDIR/ismfs") { return 1; } else { return 0; } }
147

148 149 150 151 152
#
# Same for a remote node.
#
sub REMOTE()	{ if (-e "$SETUPDIR/isrem") { return 1; } else { return 0; } }

153 154 155 156
#
# Open a TMCC connection and return the "stream pointer". Caller is
# responsible for closing the stream and checking return value.
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
157
# usage: OPENTMCC(char *command, char *args, char *options)
158
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
159
sub OPENTMCC($;$$)
160
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
161
    my($cmd, $args, $options) = @_;
162
    my $vn = "";
163 164 165 166 167
    local *TM;

    if (!defined($args)) {
	$args = "";
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
168 169 170
    if (!defined($options)) {
	$options = "";
    }
171 172 173
    if ($vnodeid ne "") {
	$vn = "-n $vnodeid";
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
174 175 176
    if ($tmcctimeout) {
	$options .= " -t $tmcctimeout";
    }
177

Leigh B. Stoller's avatar
Leigh B. Stoller committed
178 179
    my $foo = sprintf("%s -v %d $options $NODE $vn $cmd $args |",
		      TMCC, TMCD_VERSION);
180

Leigh B. Stoller's avatar
Leigh B. Stoller committed
181 182 183 184 185
    if (!open(TM, $foo)) {
	print STDERR "Cannot start TMCC: $!\n";
	die("\n") if $tmccdie;
	return undef;
    }
186 187 188
    return (*TM);
}

189 190 191 192 193 194
#
# Close connection. Die on error.
# 
sub CLOSETMCC($) {
    my($TM) = @_;
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
195 196 197 198 199 200 201 202 203 204 205
    if (! close($TM)) {
	if ($?) {
	    print STDERR "TMCC exited with status $?!\n";
	}
	else {
	    print STDERR "Error closing TMCC pipe: $!\n";
	}
	die("\n") if $tmccdie;
	return 0;
    }
    return 1;
206 207
}

208 209 210
#
# Run a TMCC command with the provided arguments.
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
211
# usage: RUNTMCC(char *command, char *args, char *options)
212
#
Leigh B. Stoller's avatar
Leigh B. Stoller committed
213
sub RUNTMCC($;$$)
214
{
Leigh B. Stoller's avatar
Leigh B. Stoller committed
215
    my($cmd, $args, $options) = @_;
216 217 218 219 220
    my($TM);

    if (!defined($args)) {
	$args = "";
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
221 222 223
    if (!defined($options)) {
	$options = "";
    }
224
    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
225
    $TM = OPENTMCC($cmd, $args, $options);
226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244

    close($TM)
	or die $? ? "TMCC exited with status $?" : "Error closing pipe: $!";
    
    return 0;
}

#
# Inform the master we have rebooted.
#
sub inform_reboot()
{
    RUNTMCC(TMCCCMD_REBOOT);
    return 0;
}

#
# Reset to a moderately clean state.
#
245 246 247
sub cleanup_node ($) {
    my ($scrub) = @_;
    
248 249
    print STDOUT "Cleaning node; removing configuration files ...\n";
    unlink TMIFC, TMRPM, TMSTARTUPCMD, TMNICKNAME, TMTARBALLS;
250
    unlink TMROUTECONFIG, TMTRAFFICCONFIG, TMTUNNELCONFIG;
251 252
    unlink TMMOUNTDB . ".db";

253 254 255 256 257 258 259 260 261 262 263 264 265 266 267
    #
    # If scrubbing, remove the password/group file DBs so that we revert
    # to base set.
    # 
    if ($scrub) {
	unlink TMPASSDB . ".db";
	unlink TMGROUPDB . ".db";
    }

    if (! REMOTE()) {
	printf STDOUT "Resetting %s file\n", HOSTSFILE;
	if (system($CP, "-f", TMHOSTS, HOSTSFILE) != 0) {
	    printf "Could not copy default %s into place: $!\n", HOSTSFILE;
	    exit(1);
	}
268 269
    }

270
    return os_cleanup_node($scrub);
271 272 273 274 275 276 277 278 279 280 281 282 283
}

#
# Check node allocation.
#
# Returns 0 if node is free. Returns list (pid/eid/vname) if allocated.
#
sub check_status ()
{
    my $TM;
    
    $TM = OPENTMCC(TMCCCMD_STATUS);
    $_  = <$TM>;
284
    CLOSETMCC($TM);
285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308

    if ($_ =~ /^FREE/) {
	return 0;
    }
    
    if ($_ =~ /ALLOCATED=([-\@\w.]*)\/([-\@\w.]*) NICKNAME=([-\@\w.]*)/) {
	$pid   = $1;
	$eid   = $2;
	$vname = $3;
    }
    else {
	warn "*** WARNING: Error getting reservation status\n";
	return 0;
    }
    return ($pid, $eid, $vname);
}

#
# Stick our nickname in a file in case someone wants it.
#
sub create_nicknames()
{
    open(NICK, ">" . TMNICKNAME)
	or die("Could not open nickname file: $!");
309
    print NICK "$vname.$eid.$pid\n";
310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334
    close(NICK);

    return 0;
}

#
# Process mount directives from TMCD. We keep track of all the mounts we
# have added in here so that we delete just the accounts we added, when
# project membership changes. Same goes for project directories on shared
# nodes. We use a simple perl DB for that.
#
sub domounts()
{
    my $TM;
    my %MDB;
    my %mounts;
    my %deletes;
    
    $TM = OPENTMCC(TMCCCMD_MOUNTS);

    while (<$TM>) {
	if ($_ =~ /REMOTE=([-:\@\w\.\/]+) LOCAL=([-\@\w\.\/]+)/) {
	    $mounts{$1} = $2;
	}
    }
335 336
    CLOSETMCC($TM);
    
337 338 339 340
    #
    # The MFS version does not support (or need) this DB stuff. Just mount
    # them up.
    #
341
    if (MFS()) {
342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358
	while (($remote, $local) = each %mounts) {
	    if (! -e $local) {
		if (! os_mkdir($local, 0770)) {
		    warn "*** WARNING: Could not make directory $local: $!\n";
		    next;
		}
	    }
	
	    print STDOUT "  Mounting $remote on $local\n";
	    if (system("$MOUNT $remote $local")) {
		warn "*** WARNING: Could not $MOUNT $remote on $local: $!\n";
		next;
	    }
	}
	return 0;
    }

359 360 361 362 363 364 365 366 367 368 369 370 371
    dbmopen(%MDB, TMMOUNTDB, 0660);
    
    #
    # First mount all the mounts we are told to. For each one that is not
    # currently mounted, and can be mounted, add it to the DB.
    # 
    while (($remote, $local) = each %mounts) {
	if (system("$MOUNT | $EGREP ' $local '") == 0) {
	    $MDB{$remote} = $local;
	    next;
	}

	if (! -e $local) {
372
	    if (! os_mkdir($local, 0770)) {
373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432
		warn "*** WARNING: Could not make directory $local: $!\n";
		next;
	    }
	}
	
	print STDOUT "  Mounting $remote on $local\n";
	if (system("$MOUNT $remote $local")) {
	    warn "*** WARNING: Could not $MOUNT $remote on $local: $!\n";
	    next;
	}

	$MDB{$remote} = $local;
    }

    #
    # Now unmount the ones that we mounted previously, but are now no longer
    # in the mount set (as told to us by the TMCD). Note, we cannot delete 
    # them directly from MDB since that would mess up the foreach loop, so
    # just stick them in temp and postpass it.
    #
    while (($remote, $local) = each %MDB) {
	if (defined($mounts{$remote})) {
	    next;
	}

	if (system("$MOUNT | $EGREP ' $local '")) {
	    $deletes{$remote} = $local;
	    next;
	}

	print STDOUT "  Unmounting $local\n";
	if (system("$UMOUNT $local")) {
	    warn "*** WARNING: Could not unmount $local\n";
	    next;
	}
	
	#
	# Only delete from set if we can actually unmount it. This way
	# we can retry it later (or next time).
	# 
	$deletes{$remote} = $local;
    }
    while (($remote, $local) = each %deletes) {
	delete($MDB{$remote});
    }

    # Write the DB back out!
    dbmclose(%MDB);

    return 0;
}

#
# Do interface configuration.    
# Write a file of ifconfig lines, which will get executed.
#
sub doifconfig ()
{
    my $TM;
    
433 434 435 436 437 438 439 440 441 442
    #
    # Kinda ugly, but there is too much perl goo included by Socket to put it
    # on the MFS. 
    # 
    if (MFS()) {
	return 1;
    }
    require Socket;
    import Socket;
    
443 444 445 446 447 448 449 450 451 452 453
    $TM = OPENTMCC(TMCCCMD_IFC);

    #
    # Open a connection to the TMCD, and then open a local file into which
    # we write ifconfig commands (as a shell script).
    # 
    open(IFC, ">" . TMIFC)
	or die("Could not open " . TMIFC . ": $!");
    print IFC "#!/bin/sh\n";
    
    while (<$TM>) {
454 455 456 457 458 459 460 461 462
	my $pat;

	#
	# Note that speed has a units spec: (K|M)bps
	# 
	$pat  = q(INTERFACE=(\d*) INET=([0-9.]*) MASK=([0-9.]*) MAC=(\w*) );
	$pat .= q(SPEED=(\w*) DUPLEX=(\w*));
	
	if ($_ =~ /$pat/) {
463 464
	    my $iface;

465 466 467 468 469 470
	    my $inet     = $2;
	    my $mask     = $3;
	    my $mac      = $4;
	    my $speed    = $5; 
	    my $duplex   = $6;
	    my $routearg = inet_ntoa(inet_aton($inet) & inet_aton($mask));
471 472 473 474

	    if ($iface = findiface($mac)) {
		my $ifline =
		    os_ifconfig_line($iface, $inet, $mask, $speed, $duplex);
475 476 477
		    
		print STDOUT "  $ifline\n";
		print IFC "$ifline\n";
478
		print IFC TMROUTECONFIG . " $routearg up\n";
479 480
	    }
	    else {
481
		warn "*** WARNING: Bad MAC: $mac\n";
482 483 484 485 486 487
	    }
	}
	else {
	    warn "*** WARNING: Bad ifconfig line: $_";
	}
    }
488
    CLOSETMCC($TM);
489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515
    close(IFC);
    chmod(0755, TMIFC);

    return 0;
}

#
# Convert from MAC to iface name (eth0/fxp0/etc) using little helper program.
# 
sub findiface($)
{
    my($mac) = @_;
    my($iface);

    open(FIF, FINDIF . " $mac |")
	or die "Cannot start " . FINDIF . ": $!";

    $iface = <FIF>;
    
    if (! close(FIF)) {
	return 0;
    }
    
    $iface =~ s/\n//g;
    return $iface;
}

516 517 518 519 520 521 522 523
#
# Do router configuration stuff. This just writes a file for someone else
# to deal with.
#
sub dorouterconfig ()
{
    my @stuff   = ();
    my $routing = 0;
524 525
    my %upmap   = ();
    my %downmap = ();
526 527 528 529 530 531
    my $TM;

    $TM = OPENTMCC(TMCCCMD_ROUTING);
    while (<$TM>) {
	push(@stuff, $_);
    }
532
    CLOSETMCC($TM);
533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553

    if (! @stuff) {
	return 0;
    }

    #
    # Look for router type. If none, then do not bother to write this file.
    # 
    foreach my $line (@stuff) {
	if (($line =~ /ROUTERTYPE=(.+)/) && ($1 ne "none")) {
	    $routing = 1;
	    last;
	}
    }
    if (! $routing) {
	return 0;
    }
    
    open(RC, ">" . TMROUTECONFIG)
	or die("Could not open " . TMROUTECONFIG . ": $!");

554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572
    print RC "#!/bin/sh\n";
    print RC "# auto-generated by libsetup.pm, DO NOT EDIT\n";

    #
    # Now convert static route info into OS route commands
    # Also check for use of gated and remember it.
    #
    my $usegated = 0;
    my $pat;

    #
    # ROUTERTYPE=manual
    # ROUTE DEST=192.168.2.3 DESTTYPE=host DESTMASK=255.255.255.0 \
    #	NEXTHOP=192.168.1.3 COST=0
    #
    $pat = q(ROUTE DEST=([0-9\.]*) DESTTYPE=(\w*) DESTMASK=([0-9\.]*) );
    $pat .= q(NEXTHOP=([0-9\.]*) COST=([0-9]*));

    my $usemanual = 0;
573
    foreach my $line (@stuff) {
574 575 576 577 578
	if ($line =~ /ROUTERTYPE=(gated|ospf)/) {
	    $usegated = 1;
	} elsif ($line =~ /ROUTERTYPE=(manual|static)/) {
	    $usemanual = 1;
	} elsif ($usemanual && $line =~ /$pat/) {
579
	    my $dip   = $1;
580 581
	    my $rtype = $2;
	    my $dmask = $3;
582 583 584
	    my $gate  = $4;
	    my $cost  = $5;
	    my $routearg = inet_ntoa(inet_aton($gate) & inet_aton($dmask));
585

586 587 588 589 590 591 592 593
	    if (! defined($upmap{$routearg})) {
		$upmap{$routearg} = [];
		$downmap{$routearg} = [];
	    }
	    $rcline = os_routing_add_manual($rtype, $dip, $dmask, $gate,$cost);
	    push(@{$upmap{$routearg}}, $rcline);
	    $rcline = os_routing_del_manual($rtype, $dip, $dmask, $gate,$cost);
	    push(@{$downmap{$routearg}}, $rcline);
594 595 596 597 598
	} else {
	    warn "*** WARNING: Bad routing line: $line\n";
	}
    }

599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623
    print RC "case \"\$1\" in\n";
    foreach my $arg (keys(%upmap)) {
	print RC "  $arg)\n";
	print RC "    case \"\$2\" in\n";
	print RC "      up)\n";
	foreach my $rcline (@{$upmap{$arg}}) {
	    print RC "        $rcline\n";
	}
	print RC "      ;;\n";
	print RC "      down)\n";
	foreach my $rcline (@{$downmap{$arg}}) {
	    print RC "        $rcline\n";
	}
	print RC "      ;;\n";
	print RC "    esac\n";
	print RC "  ;;\n";
    }
    print RC "  enable)\n";

    #
    # Turn on IP forwarding
    #
    my $rcline = os_routing_enable_forward();
    print RC "    $rcline\n";

624 625 626 627 628 629 630 631 632
    #
    # Finally, enable gated if desired.
    #
    # Note that we allow both manually-specified static routes and gated
    # though more work may be needed on the gated config files to make
    # this work (i.e., to import existing kernel routes).
    #
    if ($usegated) {
	$rcline = os_routing_enable_gated();
633
	print RC "    $rcline\n";
634
    }
635 636 637
    print RC "  ;;\n";
    print RC "esac\n";
    print RC "exit 0\n";
638

639
    close(RC);
640
    chmod(0755, TMROUTECONFIG);
641 642 643 644

    return 0;
}

645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667
#
# Host names configuration (/etc/hosts). 
#
sub dohostnames ()
{
    my $TM;

    #
    # Start with fresh copy, since the hosts files is potentially updated
    # after the node boots via the update command.
    # 
    if (system($CP, "-f", TMHOSTS, HOSTSFILE) != 0) {
	printf STDERR "Could not copy default %s into place: $!\n", HOSTSFILE;
	return 1;
    }
    
    $TM = OPENTMCC(TMCCCMD_HOSTS);

    open(HOSTS, ">>" . HOSTSFILE)
	or die("Could not open $HOSTSFILE: $!");

    #
    # Now convert each hostname into hosts file representation and write
668 669 670 671 672
    # it to the hosts file. Note that ALIASES is for backwards compat.
    # Should go away at some point.
    #
    my $pat  = q(NAME=([-\w\.]+) IP=([0-9\.]*) ALIASES=\'([-\w\. ]*)\');
    
673
    while (<$TM>) {
674 675 676 677 678 679
	if ($_ =~ /$pat/) {
	    my $name    = $1;
	    my $ip      = $2;
	    my $aliases = $3;
	    
	    my $hostline = os_etchosts_line($name, $ip, $aliases);
680 681 682 683 684 685 686 687
	    
	    print STDOUT "  $hostline\n";
	    print HOSTS  "$hostline\n";
	}
	else {
	    warn "*** WARNING: Bad hosts line: $_";
	}
    }
688
    CLOSETMCC($TM);
689 690 691 692 693
    close(HOSTS);

    return 0;
}

Leigh B. Stoller's avatar
Leigh B. Stoller committed
694
sub doaccounts()
695 696
{
    my %newaccounts = ();
697
    my %newgroups   = ();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
698
    my %pubkeys     = ();
699
    my %deletes     = ();
Leigh B. Stoller's avatar
Leigh B. Stoller committed
700
    my %lastmod     = ();
701 702
    my %PWDDB;
    my %GRPDB;
703 704 705 706

    my $TM = OPENTMCC(TMCCCMD_ACCT);

    #
707 708 709 710 711 712
    # The strategy is to keep a record of all the groups and accounts
    # added by the testbed system so that we know what to remove. We
    # use a vanilla perl dbm for that, one for the groups and one for
    # accounts. 
    #
    # First just get the current set of groups/accounts from tmcd.
713 714 715
    #
    while (<$TM>) {
	if ($_ =~ /^ADDGROUP NAME=([-\@\w.]+) GID=([0-9]+)/) {
716 717 718
	    #
	    # Group info goes in the hash table.
	    #
719 720
	    my $gname = "$1";
	    
721
	    if (REMOTE()) {
722
		$gname = "emu-${gname}";
723
	    }
724
	    $newgroups{"$gname"} = $2
725 726 727 728 729 730 731 732
	}
	elsif ($_ =~ /^ADDUSER LOGIN=([0-9a-z]+)/) {
	    #
	    # Account info goes in the hash table.
	    # 
	    $newaccounts{$1} = $_;
	    next;
	}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
733 734 735 736 737 738 739 740 741 742
	elsif ($_ =~ /^PUBKEY LOGIN=([0-9a-z]+) KEY="(.*)"/) {
	    #
	    # Keys go into hash as a list of keys.
	    #
	    if (! defined($pubkeys{$1})) {
		$pubkeys{$1} = [];
	    }
	    push(@{$pubkeys{$1}}, $2);
	    next;
	}
743
	else {
744
	    warn "*** WARNING: Bad accounts line: $_\n";
745 746
	}
    }
747
    CLOSETMCC($TM);
748

749 750 751 752 753 754
    dbmopen(%PWDDB, TMPASSDB, 0660) or
	die("Cannot open " . TMPASSDB . ": $!\n");
	
    dbmopen(%GRPDB, TMGROUPDB, 0660) or
	die("Cannot open " . TMGROUPDB . ": $!\n");

755
    #
756 757
    # Create any groups that do not currently exist. Add each to the
    # DB as we create it.
758
    #
759 760 761 762 763 764
    while (($group, $gid) = each %newgroups) {
	my ($exists,undef,$curgid) = getgrnam($group);
	
	if ($exists) {
	    if ($gid != $curgid) {
		warn "*** WARNING: $group/$gid mismatch with existing group\n";
765
	    }
766
	    next;
767
	}
768 769 770 771 772 773 774 775 776

	print "Adding group: $group/$gid\n";
	    
	if (os_groupadd($group, $gid)) {
	    warn "*** WARNING: Error adding new group $group/$gid\n";
	    next;
	}
	# Add to DB only if successful. 
	$GRPDB{$group} = $gid;
777 778 779
    }

    #
780 781 782 783
    # Now remove the ones that we created previously, but are now no longer
    # in the group set (as told to us by the TMCD). Note, we cannot delete 
    # them directly from the hash since that would mess up the foreach loop,
    # so just stick them in temp and postpass it.
784
    #
785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800
    while (($group, $gid) = each %GRPDB) {
	if (defined($newgroups{$group})) {
	    next;
	}

	print "Removing group: $group/$gid\n";
	
	if (os_groupdel($group)) {
	    warn "*** WARNING: Error removing group $group/$gid\n";
	    next;
	}
	# Delete from DB only if successful. 
	$deletes{$group} = $gid;
    }
    while (($group, $gid) = each %deletes) {
	delete($GRPDB{$group});
801
    }
802 803 804 805
    %deletes = ();

    # Write the DB back out!
    dbmclose(%GRPDB);
806 807

    #
808 809 810
    # Repeat the same sequence for accounts, except we remove old accounts
    # first. 
    # 
Leigh B. Stoller's avatar
Leigh B. Stoller committed
811 812 813 814 815 816 817 818 819 820 821 822 823
    while (($login, $info) = each %PWDDB) {
	my $uid = $info;
	
	#
	# Split out the uid from the serial. Note that this was added later
	# so existing DBs might not have a serial yet. We save the serial
	# for later. 
	#
	if ($info =~ /(\d*):(\d*)/) {
	    $uid = $1;
	    $lastmod{$login} = $2;
	}
	
824 825 826
	if (defined($newaccounts{$login})) {
	    next;
	}
827

828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867
	my ($exists,undef,$curuid,undef,
	    undef,undef,undef,$homedir) = getpwnam($login);

	#
	# If the account is gone, someone removed it by hand. Remove it
	# from the DB so we do not keep trying.
	#
	if (! defined($exists)) {
	    warn "*** WARNING: Account for $login was already removed!\n";
	    $deletes{$login} = $login;
	    next;
	}

	#
	# Check for mismatch, just in case. If there is a mismatch remove it
	# from the DB so we do not keep trying.
	#
	if ($uid != $curuid) {
	    warn "*** WARNING: ".
		 "Account uid for $login has changed ($uid/$curuid)!\n";
	    $deletes{$login} = $login;
	    next;
	}
	
	print "Removing user: $login\n";
	
	if (os_userdel($login) != 0) {
	    warn "*** WARNING: Error removing user $login\n";
	    next;
	}

	#
	# Remove the home dir. 
	#
	# Must ask for the current home dir in case it came from pw.conf.
	#
	if (defined($homedir) &&
	    index($homedir, "/${login}")) {
	    if (os_homedirdel($login, $homedir) != 0) {
	        warn "*** WARNING: Could not remove homedir $homedir.\n";
868 869
	    }
	}
870 871 872 873 874 875 876
	
	# Delete from DB only if successful. 
	$deletes{$login} = $login;
    }
    
    while (($login, $foo) = each %deletes) {
	delete($PWDDB{$login});
877 878
    }

879
    my $pat = q(ADDUSER LOGIN=([0-9a-z]+) PSWD=([^:]+) UID=(\d+) GID=(.*) );
880
    $pat   .= q(ROOT=(\d) NAME="(.*)" HOMEDIR=(.*) GLIST="(.*)" );
Leigh B. Stoller's avatar
Leigh B. Stoller committed
881
    $pat   .= q(SERIAL=(\d+));
882 883

    while (($login, $info) = each %newaccounts) {
884
	if ($info =~ /$pat/) {
885 886 887 888 889 890 891
	    $pswd  = $2;
	    $uid   = $3;
	    $gid   = $4;
	    $root  = $5;
	    $name  = $6;
	    $hdir  = $7;
	    $glist = $8;
Leigh B. Stoller's avatar
Leigh B. Stoller committed
892
	    $serial= $9;
893 894 895
	    if ( $name =~ /^(([^:]+$|^))$/ ) {
		$name = $1;
	    }
896

Leigh B. Stoller's avatar
Leigh B. Stoller committed
897 898 899 900 901 902 903 904 905
	    #
	    # See if update needed, based on the serial number we get.
	    # If its different, the account info has changed.
	    # 
	    my $doupdate = 0;
	    if (!defined($lastmod{$login}) || $lastmod{$login} != $serial) {
		$doupdate = 1;
	    }
	    
906
	    my ($exists,undef,$curuid) = getpwnam($login);
907 908

	    if ($exists) {
909 910 911 912 913 914 915 916 917 918
		if (!defined($PWDDB{$login})) {
		    warn "*** WARNING: ".
			 "Skipping since $login existed before EmulabMan!\n";
		    next;
		}
		if ($curuid != $uid) {
		    warn "*** WARNING: ".
			 "$login/$uid uid mismatch with existing login.\n";
		    next;
		}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
919 920 921 922 923 924 925 926 927 928 929
		if ($doupdate) {
		    print "Updating: ".
			"$login/$uid/$gid/$root/$name/$hdir/$glist\n";
		    
		    os_usermod($login, $gid, "$glist", $pswd, $root);

		    #
		    # Note that we changed the info for next time.
		    # 
		    $PWDDB{$login} = "$uid:$serial";
		}
930
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
931 932
	    else {
		print "Adding: $login/$uid/$gid/$root/$name/$hdir/$glist\n";
933

Leigh B. Stoller's avatar
Leigh B. Stoller committed
934 935 936 937 938 939 940 941 942 943 944 945 946 947
		if (os_useradd($login, $uid, $gid, $pswd, 
			       "$glist", $hdir, $name, $root)) {
		    warn "*** WARNING: Error adding new user $login\n";
		    next;
		}
		# Add to DB only if successful. 
		$PWDDB{$login} = "$uid:$serial";
	    }

	    #
	    # Skip ssh stuff if a local node or not updating (if the
	    # user did not exist, $doupdate will be true).
	    # 
	    if (!REMOTE() || !$doupdate) {
948 949
		next;
	    }
950 951 952 953 954 955 956 957 958

	    #
	    # Create .ssh dir and populate it with an authkeys file.
	    # Must ask for the current home dir since we rely on pw.conf.
	    #
	    my (undef,undef,undef,undef,
		undef,undef,undef,$homedir) = getpwuid($uid);
	    my $sshdir = "$homedir/.ssh";
	    
Leigh B. Stoller's avatar
Leigh B. Stoller committed
959
	    if (! -e $sshdir) {
960 961 962 963 964 965 966 967
		if (! mkdir($sshdir, 0700)) {
		    warn("*** WARNING: Could not mkdir $sshdir: $!\n");
		    next;
		}
		if (!chown($uid, $gid, $sshdir)) {
		    warn("*** WARNING: Could not chown $sshdir: $!\n");
		    next;
		}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984
	    }
		
	    if (!open(AUTHKEYS, "> $sshdir/authorized_keys.new")) {
		warn("*** WARNING: Could not open $sshdir/keys.new: $!\n");
		next;
	    }
	    print AUTHKEYS "#\n";
	    print AUTHKEYS "# DO NOT EDIT! This file auto generated by ".
		"Emulab.Net account software.\n";
	    print AUTHKEYS "#\n";
	    print AUTHKEYS "# Please use the web interface to edit your ".
		"public key list.\n";
	    print AUTHKEYS "#\n";
	    foreach my $key (@{$pubkeys{$login}}) {
		print AUTHKEYS "$key\n";
	    }
	    close(AUTHKEYS);
985

Leigh B. Stoller's avatar
Leigh B. Stoller committed
986 987 988 989 990 991 992 993 994 995 996 997
	    if (!chown($uid, $gid, "$sshdir/authorized_keys.new")) {
		warn("*** WARNING: Could not chown $sshdir/keys: $!\n");
		next;
	    }
	    if (!chmod(0600, "$sshdir/authorized_keys.new")) {
		warn("*** WARNING: Could not chmod $sshdir/keys: $!\n");
		next;
	    }
	    if (-e "$sshdir/authorized_keys") {
		if (system("cp -p -f $sshdir/authorized_keys ".
			   "$sshdir/authorized_keys.old")) {
		    warn("*** Could not save off $sshdir/keys: $!\n");
998 999
		    next;
		}
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1000 1001 1002 1003 1004
		if (!chown($uid, $gid, "$sshdir/authorized_keys.old")) {
		    warn("*** Could not chown $sshdir/oldkeys: $!\n");
		}
		if (!chmod(0600, "$sshdir/authorized_keys.old")) {
		    warn("*** Could not chmod $sshdir/oldkeys: $!\n");
1005 1006
		}
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1007 1008 1009 1010
	    if (system("mv -f $sshdir/authorized_keys.new ".
		       "$sshdir/authorized_keys")) {
		warn("*** Could not mv $sshdir/keys: $!\n");
	    }
1011 1012 1013
	}
	else {
	    warn("*** Bad accounts line: $info\n");
1014 1015
	}
    }
1016 1017 1018
    # Write the DB back out!
    dbmclose(%PWDDB);

1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032
    return 0;
}

#
# RPM configuration. 
#
sub dorpms ()
{
    my @rpms = ();
    
    my $TM = OPENTMCC(TMCCCMD_RPM);
    while (<$TM>) {
	push(@rpms, $_);
    }
1033
    CLOSETMCC($TM);
1034 1035 1036 1037 1038 1039 1040 1041 1042 1043

    if (! @rpms) {
	return 0;
    }
    
    open(RPM, ">" . TMRPM)
	or die("Could not open " . TMRPM . ": $!");
    print RPM "#!/bin/sh\n";
    
    foreach my $rpm (@rpms) {
1044
	if ($rpm =~ /RPM=(.+)/) {
1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071
	    my $rpmline = os_rpminstall_line($1);
		    
	    print STDOUT "  $rpmline\n";
	    print RPM    "echo \"Installing RPM $1\"\n";
	    print RPM    "$rpmline\n";
	}
	else {
	    warn "*** WARNING: Bad RPMs line: $rpm";
	}
    }
    close(RPM);
    chmod(0755, TMRPM);

    return 0;
}

#
# TARBALL configuration. 
#
sub dotarballs ()
{
    my @tarballs = ();

    my $TM = OPENTMCC(TMCCCMD_TARBALL);
    while (<$TM>) {
	push(@tarballs, $_);
    }
1072
    CLOSETMCC($TM);
1073 1074 1075 1076 1077 1078 1079 1080 1081 1082

    if (! @tarballs) {
	return 0;
    }
    
    open(TARBALL, ">" . TMTARBALLS)
	or die("Could not open " . TMTARBALLS . ": $!");
    print TARBALL "#!/bin/sh\n";
    
    foreach my $tarball (@tarballs) {
1083
	if ($tarball =~ /DIR=(.+)\s+TARBALL=(.+)/) {
1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111
	    my $tbline = sprintf($TARINSTALL, $1, $2);
		    
	    print STDOUT  "  $tbline\n";
	    print TARBALL "echo \"Installing Tarball $2 in dir $1 \"\n";
	    print TARBALL "$tbline\n";
	}
	else {
	    warn "*** WARNING: Bad Tarballs line: $tarball";
	}
    }
    close(TARBALL);
    chmod(0755, TMTARBALLS);

    return 0;
}

#
# Experiment startup Command.
#
sub dostartupcmd ()
{
    my $startupcmd;
    
    my $TM = OPENTMCC(TMCCCMD_STARTUP);
    $_ = <$TM>;
    if (defined($_)) {
	$startupcmd = $_;
    }
1112
    CLOSETMCC($TM);
1113 1114 1115 1116 1117 1118 1119 1120

    if (! $startupcmd) {
	return 0;
    }
    
    open(RUN, ">" . TMSTARTUPCMD)
	or die("Could not open $TMSTARTUPCMD: $!");
    
1121
    if ($startupcmd =~ /CMD=(\'.+\') UID=([0-9a-z]+)/) {
1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134
	print  STDOUT "  Will run $1 as $2\n";
	print  RUN    "$startupcmd";
    }
    else {
	warn "*** WARNING: Bad startupcmd line: $startupcmd";
    }

    close(RUN);
    chmod(0755, TMSTARTUPCMD);

    return 0;
}

1135 1136 1137 1138 1139 1140
sub dotrafficconfig()
{
    my $didopen = 0;
    my $pat;
    my $TM;
    my $boss;
1141
    my $startnse = 0;
1142
    
1143 1144 1145 1146 1147 1148 1149 1150 1151
    #
    # Kinda ugly, but there is too much perl goo included by Socket to put it
    # on the MFS. 
    # 
    if (MFS()) {
	return 1;
    }
    require Socket;
    import Socket;
1152 1153
    
    $TM = OPENTMCC(TMCCCMD_BOSSINFO);
1154 1155 1156 1157 1158 1159 1160
    my $bossinfo = <$TM>;
    ($boss) = split(" ", $bossinfo);

    #
    # XXX hack: workaround for tmcc cmd failure inside TCL
    #     storing the output of a few tmcc commands in
    #     $SETUPDIR files for use by NSE
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1161 1162 1163 1164 1165 1166 1167
    #
    if (! REMOTE()) {
	open(BOSSINFCFG, ">$SETUPDIR/tmcc.bossinfo") or
	    die "Cannot open file $SETUPDIR/tmcc.bossinfo: $!";
	print BOSSINFCFG "$bossinfo";
	close(BOSSINFCFG);
    }
1168

1169
    CLOSETMCC($TM);
1170 1171 1172 1173 1174 1175
    my ($pid, $eid, $vname) = check_status();

    my $cmdline = "$SETUPDIR/trafgen -s $boss";
    if ($pid) {
	$cmdline .= " -E $pid/$eid";
    }
1176

1177 1178 1179 1180 1181
    #
    # XXX hack: workaround for tmcc cmd failure inside TCL
    #     storing the output of a few tmcc commands in
    #     $SETUPDIR files for use by NSE
    #
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197
    if (! REMOTE()) {
	my $record_sep;

	$record_sep = $/;
	undef($/);
	$TM = OPENTMCC(TMCCCMD_IFC);
	open(IFCFG, ">$SETUPDIR/tmcc.ifconfig") or
	    die "Cannot open file $SETUPDIR/tmcc.ifconfig: $!";
	print IFCFG <$TM>;
	close(IFCFG);
	CLOSETMCC($TM);
	$/ = $record_sep;
	
	open(TRAFCFG, ">$SETUPDIR/tmcc.trafgens") or
	    die "Cannot open file $SETUPDIR/tmcc.trafgens: $!";    
    }
1198

1199 1200
    $TM = OPENTMCC(TMCCCMD_TRAFFIC);

1201
    $pat  = q(TRAFGEN=([-\w.]+) MYNAME=([-\w.]+) MYPORT=(\d+) );
1202
    $pat .= q(PEERNAME=([-\w.]+) PEERPORT=(\d+) );
1203
    $pat .= q(PROTO=(\w+) ROLE=(\w+) GENERATOR=(\w+));
1204 1205

    while (<$TM>) {
1206

Leigh B. Stoller's avatar
Leigh B. Stoller committed
1207 1208 1209
	if (! REMOTE()) {
	    print TRAFCFG "$_";
	}
1210 1211 1212
	if ($_ =~ /$pat/) {
	    #
	    # The following is specific to the modified TG traffic generator:
1213 1214 1215 1216 1217
	    #
	    #  trafgen [-s serverip] [-p serverport] [-l logfile] \
	    #	     [ -N name ] [-P proto] [-R role] [ -E pid/eid ] \
	    #	     [ -S srcip.srcport ] [ -T targetip.targetport ]
	    #
1218 1219
	    # N.B. serverport is not needed right now
	    #
1220 1221 1222 1223 1224 1225 1226 1227
	    my $name = $1;
	    my $ownaddr = inet_ntoa(my $ipaddr = gethostbyname($2));
	    my $ownport = $3;
	    my $peeraddr = inet_ntoa($ipaddr = gethostbyname($4));
	    my $peerport = $5;
	    my $proto = $6;
	    my $role = $7;
	    my $generator = $8;
1228
	    my $target;
1229
	    my $source;
1230

1231 1232 1233
	    # Skip if not specified as a TG generator. At some point
	    # work in Shashi's NSE work.
	    if ($generator ne "TG") {
1234 1235 1236 1237 1238 1239 1240
		$startnse = 1;
		if (! $didopen) {
		    open(RC, ">" . TMTRAFFICCONFIG)
			or die("Could not open " . TMTRAFFICCONFIG . ": $!");
		    print RC "#!/bin/sh\n";
		    $didopen = 1;
		}
1241 1242 1243
		next;
	    }

1244 1245
	    if ($role eq "sink") {
		$target = "$ownaddr.$ownport";
1246
		$source = "$peeraddr.$peerport";
1247 1248 1249
	    }
	    else {
		$target = "$peeraddr.$peerport";
1250
		$source = "$ownaddr.$ownport";
1251 1252 1253 1254 1255 1256 1257 1258
	    }

	    if (! $didopen) {
		open(RC, ">" . TMTRAFFICCONFIG)
		    or die("Could not open " . TMTRAFFICCONFIG . ": $!");
		print RC "#!/bin/sh\n";
		$didopen = 1;
	    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1259 1260
	    print RC "$cmdline -N $name -S $source -T $target -P $proto ".
		"-R $role >/tmp/${name}-${pid}-${eid}.debug 2>&1 &\n";
1261 1262 1263 1264 1265
	}
	else {
	    warn "*** WARNING: Bad traffic line: $_";
	}
    }
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1266 1267 1268
    if (! REMOTE()) {
	close(TRAFCFG);
    }
1269 1270 1271 1272

    if( $startnse ) {
	print RC "$SETUPDIR/startnse &\n";
    }
1273
    CLOSETMCC($TM);
1274

1275 1276 1277 1278
    #
    # XXX hack: workaround for tmcc cmd failure inside TCL
    #     storing the output of a few tmcc commands in
    #     $SETUPDIR files for use by NSE
Leigh B. Stoller's avatar
Leigh B. Stoller committed
1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291
    #
    if (! REMOTE()) {
	open(NSECFG, ">$SETUPDIR/tmcc.nseconfigs") or
	    die "Cannot open file $SETUPDIR/tmcc.nseconfigs: $!";
	$TM = OPENTMCC(TMCCCMD_NSECONFIGS);
	$record_sep = $/;
	undef($/);
	my $nseconfig = <$TM>;
	$/ = $record_sep;
	print NSECFG $nseconfig;
	CLOSETMCC($TM);
	close(NSECFG);
    }
1292
	    
1293 1294
    # XXX hack: need a separate section for starting up NSE when we
    #           support simulated nodes
1295
    if( ! $startnse ) {
1296 1297 1298
	
	if( $nseconfig ) {