README.md 1.38 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
# Getting started

Be sure to setup your SSH keys as outlined in the manual; it's better
to log in via a real SSH client to the nodes in your experiment.

The Open Air Interface source is located under `/opt/oai` on the enb1
and epc nodes.  It is mounted as a clone of a remote blockstore
(dataset) maintained by PhantomNet.  Feel free to change anything in
here, but be aware that your changes will not persist when your
experiment terminates.

To access the UE via ADB, first log in to the `adb-tgt` node, then run
`pnadb -a` to connect to the UE.  Use ADB commands as per normal
afterward.  If/when you reboot the UE, be aware that you will need to
again run `pnadb -a` to reestablish the ADB connection; wait a minute
or so for the UE to become available again before doing this.

The OAI mobile networking functions should automatically start up when
your experiment starts up.  You can pull up and monitor the OAI
processes on the `epc` and `enb1` nodes. Execute `sudo screen -ls` to
see what sessions are available. The commands for controlling services
on these nodes are located in `/local/repository/bin`.

24 25
For more detailed information:

Jonathon Duerig's avatar
Jonathon Duerig committed
26 27 28
  * [Controlling OAI](https://gitlab.flux.utah.edu/duerig/oai-enb/blob/master/control.md)
  * [Inspecting OAI](https://gitlab.flux.utah.edu/duerig/oai-enb/blob/master/inspect.md)
  * [Modifying OAI](https://gitlab.flux.utah.edu/duerig/oai-enb/blob/master/modify.md)
29

30